PubMed Health⌕ Search

Biomedical subjects

George M Sheldrick

Publications and source records attributed to George M Sheldrick.

At least 19 recordsLinked to original sources
PubMed2006

The C2A-C2B linker defines the high affinity Ca(2+) binding mode of rabphilin-3A.

The Ca(2+) binding properties of C2 domains are essential for the function of their host proteins. We present here the first crystal structures showing an unexpected Ca(2+) binding mode of the C2B domain of rabphilin-3A in atomic detail. Acidic residues from the linker region between the C2A and C2B domains of rabphilin-3A interact with the Ca(2+)-binding region of the C2B domain. Because of these interactions, the coordination sphere of the two bound Ca(2+) ions is almost complete. Mutation of these acidic residues to alanine resulted in a 10-fold decrease in the intrinsic Ca(2+) binding affinity of the C2B domain. Using NMR spectroscopy, we show that this interaction occurred only in the Ca(2+)-bound state of the C2B domain. In addition, this Ca(2+) binding mode was maintained in the C2 domain tandem fragment. In NMR-based liposome binding assays, the linker was not released upon phospholipid binding. Therefore, this unprecedented Ca(2+) binding mode not only shows how a C2 domain increases its intrinsic Ca(2+) affinity, but also provides the structural base for an atypical protein-Ca(2+)-phospholipid binding mode of rabphilin-3A.

Adaptor Proteins, Signal Transducing↗
PubMed2006

Structure of the C2A domain of rabphilin-3A.

Rabphilin-3A is a neuronal protein containing a C2-domain tandem. To date, only the structure of the C2B domain has been solved. The crystal structure of the Ca2+-free C2A domain has been solved by molecular replacement and refined to 1.92 A resolution. It adopts the classical C2-domain fold consisting of an eight-stranded antiparallel beta-sandwich with type I topology. In agreement with its Ca2+-dependent negatively charged membrane-binding properties, this C2 domain contains all the conserved acidic residues responsible for calcium binding. However, the replacement of a conserved aspartic acid residue by glutamic acid allows formation of an additional strong hydrogen bond, resulting in increased rigidity of calcium-binding loop 1. The electrostatic surface of the C2A domain consists of a large positively charged belt surrounded by two negatively charged patches located at both tips of the domain. In comparison, the structurally very similar C2A domain of synaptotagmin I has a highly acidic electrostatic surface, suggesting completely unrelated functions for these two C2A domains.

Adaptor Proteins, Signal Transducing↗
PubMed2006

Structural elucidation of the PDI-related chaperone Wind with the help of mutants.

The structures of the PDI-related protein Wind (with a C-terminal His(6) tag) and the mutants Y53S, Y53F and Y55K have been determined and compared with the wild-type structure with the His(6) tag at the N-terminus. All five structures show the same mode of dimerization, showing that this was not an artefact introduced by the nearby N-terminal His(6) tag and suggesting that this dimer may also be the biologically active form. Although the mutants Y53S and Y55K completely abrogate transport of the protein Pipe (which appears to be the primary function of Wind in the cell), only subtle differences can be seen in the putative Pipe-binding region. The Pipe binding in the active forms appears to involve hydrophobic interactions between aromatic systems, whereas the inactive mutants may be able to bind more strongly with the help of hydrogen bonds, which could disturb the delicate equilibrium required for effective Pipe transport.

Amino Acid Substitution↗
PubMed2006

Serendipitous SAD phasing of an echinomycin-(ACGTACGT)2 bisintercalation complex.

A new crystal form was obtained for the complex between (ACGTACGT)2 and echinomycin and X-ray data were collected to 1.6 A. The structure was phased by the SAD method based on a single unexpected anomalous scatterer that could be identified as a mixture of nickel and zinc by measurements of the anomalous scattering at different wavelengths. This cation is coordinated by two guanines from two different duplexes and four water molecules. The structure resembles previously reported crystal structures of DNA-echinomycin complexes, except that three of the eight base pairs flanking the echinomycin bisintercalator sites have the Watson-Crick rather than the Hoogsteen configuration. Hoogsteen binding was found for the corresponding base pairs of the crystallographically independent duplex, indicating that the two configurations are very close in energy.

Base Pairing↗
PubMed2005

Improving radiation-damage substructures for RIP.

Specific radiation damage can be used to solve macromolecular structures using the radiation-damage-induced phasing (RIP) method. The method has been investigated for six disulfide-containing test structures (elastase, insulin, lysozyme, ribonuclease A, trypsin and thaumatin) using data sets that were collected on a third-generation synchrotron undulator beamline with a highly attenuated beam. Each crystal was exposed to the unattenuated X-ray beam between the collection of a 'before' and an 'after' data set. The X-ray 'burn'-induced intensity differences ranged from 5 to 15%, depending on the protein investigated. X-ray-susceptible substructures were determined using the integrated direct and Patterson methods in SHELXD. The best substructures were found by downscaling the 'after' data set in SHELXC by a scale factor K, with optimal values ranging from 0.96 to 0.99. The initial substructures were improved through iteration with SHELXE by the addition of negatively occupied sites as well as a large number of relatively weak sites. The final substructures ranged from 40 to more than 300 sites, with strongest peaks as high as 57sigma. All structures except one could be solved: it was not possible to find the initial substructure for ribonuclease A, however, SHELXE iteration starting with the known five most susceptible sites gave excellent maps. Downscaling proved to be necessary for the solution of elastase, lysozyme and thaumatin and reduced the number of SHELXE iterations in the other cases. The combination of downscaling and substructure iteration provides important benefits for the phasing of macromolecular structures using radiation damage.

Animals↗
PubMed2005

Structure of Ecballium elaterium trypsin inhibitor II (EETI-II): a rigid molecular scaffold.

The Ecballium elaterium trypsin inhibitor II (EETI-II) belongs to the family of squash inhibitors and is one of the strongest inhibitors known for trypsin. The eight independent molecules of EETI-II in the crystal structure reported here provide a good opportunity to test the hypothesis that this small cystine-knot protein (knottin) is sufficiently rigid to be used as a molecular scaffold for protein-engineering purposes. To extend this test, the structures of two complexes of EETI-II with trypsin have also been determined, one carrying a four-amino-acid mutation of EETI-II. The remarkable similarity of these structures confirms the rigidity of the molecular framework and hence its suitability as a molecular scaffold.

Crystallography, X-Ray↗
PubMed2005

Structure of the lipopeptide antibiotic tsushimycin.

The amphomycin derivative tsushimycin has been crystallized and its structure determined at 1.0 A resolution. The asymmetric unit contains 12 molecules and with 1300 independent atoms this structure is one of the largest solved using ab initio direct methods. The antibiotic is comprised of a cyclodecapeptide core, an exocyclic amino acid and a fatty-acid residue. Its backbone adopts a saddle-like conformation that is stabilized by a Ca2+ ion bound within the peptide ring and accounts for the Ca2+-dependence of this antibiotic class. Additional Ca2+ ions link the antibiotic molecules to dimers that enclose an empty space resembling a binding cleft. The dimers possess a large hydrophobic surface capable of interacting with the bacterial cell membrane. The antibiotic daptomycin may exhibit a similar conformation, as the amino-acid sequence is conserved at positions involved in Ca2+ binding.

Anti-Bacterial Agents↗
PubMed2005

Crystal and solution structures of 7-amino-actinomycin D complexes with d(TTAGBrUT), d(TTAGTT) and d(TTTAGTTT).

The formation of the complex of 7-amino-actinomycin D with potentially single-stranded DNA has been studied by X-ray crystallography in the solid state, by NMR in solution and by molecular modelling. The crystal structures of the complex with 5'-TTAG[Br(5)U]T-3' provide interesting examples of MAD phasing in which the dispersive component of the MAD signal was almost certainly enhanced by radiation damage. The trigonal and orthorhombic crystal modifications both contain antibiotic molecules and DNA strands in the form of a 2:4 complex: in the orthorhombic form there is one such complex in the asymmetric unit, while in the trigonal structure there are four. In both structures the phenoxazone ring of the first drug intercalates between a BrU-G (analogous to T-G) wobble pair and a G-T pair where the T is part of a symmetry-related molecule. The chromophore of the second actinomycin intercalates between the BrU-G and G-BrU wobble pairs of the partially paired third and fourth strands. The base stacking also involves (A*T)*T triplets and Watson-Crick A-T pairs and leads to similar complex three-dimensional networks in both structures, with looping-out of unpaired bases. Although the available NOE constraints of a solution containing the antibiotic and d(TTTAGTTT) strands in the ratio 1:1 are insufficient to determine the structure of the complex from the NMR data alone, they are consistent with the intercalation geometry observed in the crystal structure. Molecular-dynamics (MD) trajectories starting from the 1:2 complexes observed in the crystal showed that although the thymines flanking the d(AGT) core are rather flexible and the G-T pairing is not permanently preserved, both strands remain bound to the actinomycin by strong interactions between it and the guanines between which it is sandwiched. Similar strong binding (hemi-intercalation) of the actinomycin to a single guanine was observed in the MD trajectories of a 1:1 complex. The dominant interaction is between the antibiotic and guanine, but the complexes are stabilized further by promiscuous base-pairing.

Antibiotics, Antineoplastic↗
PubMed2005

Structures of complexes between echinomycin and duplex DNA.

The structure of the bis-intercalation complex of the depsipeptide antibiotic echinomycin with (CGTACG)2 has been redetermined at a higher resolution (1.4 A) and new high-resolution structures (1.1-1.5 A) are reported for the complexes of echinomycin with (GCGTACGC)2 (at both low and high ionic strengths) and (ACGTACGT)2. The structures show the expected Hoogsteen pairing for the base pairs flanking the intercalating chromophores on the outside and Watson-Crick pairing for both base pairs enclosed by the echinomycin. In the octamer complexes but not the hexamer complex, the echinomycin molecule, which would possess a molecular twofold axis were it not for the thioacetal bridge, shows twofold disorder. In all the structures the stacking of the base pairs and chromophores is extended by intermolecular stacking. The structures provide more precise details of the hydrogen bonding and other interactions between the bis-intercalating antibiotics and the duplex DNA than were previously available.

Base Pairing↗
PubMed2004

Solution and structure of an alternating D,L-peptide.

The crystal structure of H-(L-Tyr-D-Tyr)(4)-L-Lys-OH has been determined to 1.3 A resolution. The D,L-alternating peptide crystallizes in the tetragonal system, space group P4(3)2(1)2, with unit-cell parameters a = b = 27.99 (3), c = 78.93 (8) A. The crystals contain two molecules in the asymmetric unit that form a double-stranded right-handed antiparallel beta-helix. The structure has been solved by SIRAS using a crystal soaked in an iodide-containing solution for 1 min. The programs SHELXD and SHELXE were used to determine the iodide substructure and also the experimental electron-density map. Using the coordinates of known D,L-peptides deposited in the PDB, several attempts were made to solve the structure by molecular-replacement techniques. Although the backbone of the MR model selected shows great similarity and was used to trace the actual peptide structure in the map, it was not possible to obtain the correct solution before the experimental phases became available. The correct fragment orientations are easily determined, but the same does not apply to the translation search. Nevertheless, insights into fragment search and expansion were gained from the tests described in this paper. The correlation coefficient calculated with the resolution shell of data around 2.4 A, a distance corresponding to most 1-3 interatomic vectors, is a particularly good discriminator of correct orientations in the rotation search of small fragments.

Crystallography, X-Ray↗
PubMed2004

Mapping of a substrate binding site in the protein disulfide isomerase-related chaperone wind based on protein function and crystal structure.

The protein disulfide isomerase (PDI)-related protein Wind is essential in Drosophila melanogaster, and is required for correct targeting of Pipe, an essential Golgi transmembrane 2-O-sulfotransferase. Apart from a thioredoxin fold domain present in all PDI proteins, Wind also has a unique C-terminal D-domain found only in PDI-D proteins. Here, we show that Pipe processing requires dimeric Wind, which interacts directly with the soluble domain of Pipe in vitro, and we map an essential substrate binding site in Wind to the vicinity of an exposed cluster of tyrosines within the thioredoxin fold domain. In vitro, binding occurs to multiple sites within the Pipe polypeptide and shows specificity for two consecutive aromatic residues. A second site in Wind, formed by a cluster of residues within the D-domain, is likewise required for substrate processing. This domain, expressed separately, impairs Pipe processing by the full-length Wind protein, indicating competitive binding to substrate. Our data represent the most accurate map of a peptide binding site in a PDI-related protein available to date and directly show peptide specificity for a naturally occurring substrate.

Amino Acid Sequence↗
PubMed2004

Inclusion complexes of V-amylose with undecanoic acid and dodecanol at atomic resolution: X-ray structures with cycloamylose containing 26 D-glucoses (cyclohexaicosaose) as host.

Crystal structures are reported of cycloamylose containing 26 D-glucose residues (CA26, cyclohexaicosaose, C156H260O130) in complexes with undecanoic acid (CA26 x 2C10H21COOH x 34.95 H2O, orthorhombic P2(1)2(1)2(1), one CA26 and two bound undecanoic acids F1 and F2 in the asymmetric unit, resolution 0.95 angstroms) and with dodecanol ((CA26)(0.5) x C12H25OH x 32.0H2O, monoclinic C2, half a CA26 binding one dodecanol, A, in the asymmetric unit, resolution 1.0 angstroms). The macrocycle of CA26 is folded like the figure '8' into two 10 D-glucoses long left-handed V-amylose helices forming approximately 5A wide V-channels that are occupied by undecanoic acid (F1, F2) or dodecanol (A) as guest molecules. The functional head groups of the guests near the O(6) ends of the V-channels are hydrogen bonded with d-glucose O(6)n-H; the aliphatic termini beyond C(9) protrude from the O(2), O(3) ends. Parts of the aliphatic chains enclosed in the V-channels are all-trans except for one torsion angle each (approximately 130 degrees ) in undecanoic acid molecules F1 and F2. There are several (guest)C-H...O hydrogen bonds to O(4) and O(6) of CA26 in both complexes, and H...H van der Waals interactions with d-glucose C(3)-H and C(5)-H dominate. C(5)-H determine the position of the aliphatic chains of undecanoic acid F1 and of dodecanol A in contrast to F2 where both C(3)-H and C(5)-H contribute equally, probably because the V-channel is narrower than in F1 and in dodecanol. Complexes of polymeric V-amylose with fatty acids and alcohols studied by X-ray fiber diffraction could not provide the here described high resolution.

Amylose↗
PubMed2004

Crystal structure of the alkylsulfatase AtsK: insights into the catalytic mechanism of the Fe(II) alpha-ketoglutarate-dependent dioxygenase superfamily.

The alkylsulfatase AtsK from Pseudomonas putida S-313 belongs to the widespread and versatile non-heme iron(II) alpha-ketoglutarate-dependent dioxygenase superfamily and catalyzes the oxygenolytic cleavage of a variety of different alkyl sulfate esters to the corresponding aldehyde and sulfate. The enzyme is only expressed under sulfur starvation conditions, providing a selective advantage for bacterial growth in soils and rhizosphere. Here we describe the crystal structure of AtsK in the apo form and in three complexes: with the cosubstrate alpha-ketoglutarate, with alpha-ketoglutarate and iron, and finally with alpha-ketoglutarate, iron, and an alkyl sulfate ester used as substrate in catalytic studies. The overall fold of the enzyme is closely related to that of the taurine/alpha-ketoglutarate dioxygenase TauD and is similar to the fold observed for other members of the enzyme superfamily. From comparison of these structures with the crystal structure of AtsK and its complexes, we propose a general mechanism for the catalytic cycle of the alpha-ketoglutarate-dependent dioxygenase superfamily.

Amino Acid Motifs↗
PubMed2003

Structure of viscotoxin A3: disulfide location from weak SAD data.

The crystal structure of viscotoxin A3 (VT A3) extracted from European mistletoe (Viscum album L.) has been solved using the anomalous diffraction of the native S atoms measured in-house with Cu Kalpha radiation to a resolution of 2.2 A and truncated to 2.5 A. A 1.75 A resolution synchrotron data set was used for phase expansion and refinement. An innovation in the dual-space substructure-solution program SHELXD enabled the individual S atoms of the disulfide bonds to be located using the Cu Kalpha data; this resulted in a marked improvement in the phasing compared with the use of super-S atoms. The VT A3 monomer consists of 46 amino acids with three disulfide bridges and has an overall fold resembling the canonical architecture of the alpha- and beta-thionins, a capital letter L. The asymmetric unit consists of two monomers related by a local twofold axis and held together by hydrophobic interactions between the monomer units. One phosphate anion (confirmed by 31P-NMR and MS) is associated with each monomer.

Binding Sites↗
PubMed2003

Crystal structure and functional analysis of Drosophila Wind, a protein-disulfide isomerase-related protein.

In the developing Drosophila melanogaster embryo, dorsal-ventral patterning displays an absolute requirement for the product of the essential windbeutel gene, Wind. In homozygous windbeutel mutant flies, dorsal-ventral patterning fails to initiate because of the failure of the Golgi-resident proteoglycan-modifying protein, Pipe, to exit the endoplasmic reticulum, and this leads to the death of the embryo. Here, we describe the three-dimensional structure of Wind at 1.9-A resolution and identify a candidate surface for interaction with Pipe. This represents the first crystal structure of a eukaryotic protein-disulfide isomerase-related protein of the endoplasmic reticulum to be described. The dimeric protein is composed of an N-terminal thioredoxin domain and a C-terminal alpha-helical domain unique to protein-disulfide isomerase D proteins. Although Wind carries a CXXC motif that is partially surface accessible, this motif is redox inactive, and the cysteines are not required for the targeting of Pipe to the Golgi. However, both domains are required for targeting Pipe to the Golgi, and, although the mouse homologue ERp28 cannot replace the function of Wind, exchange of the Wind D-domain with that of ERp28 allows for efficient Golgi transport of Pipe.

Amino Acid Sequence↗
PubMed2003

Structure of dimeric cytochrome c3 from Desulfovibrio gigas at 1.2 A resolution.

The structure of dimeric cytochrome c(3) from the sulfate-reducing bacterium Desulfovibrio gigas, diDg, obtained by ab initio methods was further refined to 1.2 A resolution, giving final reliability factors of R(free) = 14.8% and R = 12.4%. This cytochrome is a dimer of tetraheme cytochrome c(3) molecules covalently linked by two solvent-accessible disulfide bridges, a characteristic unique to members of the cytochrome c(3) superfamily. Anisotropic analysis using the semi-rigid TLS method shows different behaviour for analogous loops in each monomer arising from their different packing environments. A detailed sequence and structural comparison with all other known cytochrome c(3) domains in single- and multi-domain cytochromes c(3) shows the presence of structurally conserved regions in this family, despite the high variability of the amino-acid sequence. An internal water molecule is conserved in a common structural arrangement in all c(3) tetraheme domains, indicating a probable electron-transfer pathway between hemes I and II. Unique features of diDg are an internal methionine residue close to heme I and to one of the axial ligands of heme III, where all other structures of the cytochrome c(3) superfamily have a phenylalanine, and a rather unusual CXXXCH heme-binding motif only found so far in this cytochrome.

Amino Acid Sequence↗
PubMed2003

In-house measurement of the sulfur anomalous signal and its use for phasing.

Five test structures (orthorhombic and trigonal trypsin, cubic and rhombohedral insulin and thaumatin) have been solved by the SAD (single-wavelength anomalous diffraction) method using highly redundant data collected at 100 K with a CCD detector, rotating-anode generator and three-circle goniometer. The very weak anomalous scattering (primarily from sulfur) was sufficient to locate all the anomalous scatterers using the integrated direct and Patterson methods in SHELXD. These positions and occupancies were used without further refinement to estimate phases that were extended to native (in-house) resolution by the sphere of influence algorithm in SHELXE. The final map correlation coefficients relative to the anisotropically refined structures were in the range 0.81-0.97. The use of highly redundant medium-resolution laboratory data for sulfur-SAD phasing combined with high-resolution synchrotron native data for phase expansion and structure refinement clearly has considerable potential.

Algorithms↗