PubMed Health⌕ Search

Biomedical subjects

Georgios Theodoridis

Publications and source records attributed to Georgios Theodoridis.

13 recordsLinked to original sources
PubMed2026

Quantifying the aromatic amino acid metabolome: UPLC-MS/MS analysis of aromatic amino acids and their host and co-metabolites in plasma.

Aromatic amino acids (AAAs), tryptophan, phenylalanine, and tyrosine along with their pathway metabolites have been implicated in the pathogenesis of diseases ranging from cardiovascular, neurological, inflammatory, and cancer diseases, among others. As such, the measurement of the primary AAAs, their host pathway metabolites, and microbiome derived co-metabolites in blood can provide a sensitive reflection of systemic health. The aim of the study was to develop a method for the quantification of 17 metabolites, the three AAAs and various of their metabolites in plasma using a high-throughput ultra performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method. The method demonstrated a dynamic range (1 to 16,700 ng/mL), with detection limits (LOD) as low as 0.05 ng/mL. Quantification limits ranged from 3 to 5019 ng/mL (LLOQ) and up to 16,700 ng/mL (ULOQ). Recovery at LQC, MQC, and HQC was satisfactory and consistent across most metabolites, with significant matrix effects observed only for 4-ethylphenol sulfate. Furthermore, intra and inter-day accuracy and precision met all acceptance criteria at all quality control concentrations for most of the metabolites. Measurement of NIST SRM 1950 showcased the method's accuracy for most of the metabolites. Finally, the method was applied on the analysis of plasma samples from 55 individuals (13 males and 42 females) providing information on AAAs and their pathway metabolites relevant concentrations in human plasma.

Amino Acids, Aromatic↗
PubMed2006

Sequential injection affinity chromatography utilizing an albumin immobilized monolithic column to study drug-protein interactions.

In this study, sequential injection affinity chromatography was used for drug-protein interactions studies. The analytical system used consisted of a sequential injection analysis (SIA) manifold directly connected with convective interaction media (CIM) monolithic epoxy disks modified by ligand-immobilization of protein. A non-steroidal, anti-inflammatory drug, naproxen (NAP) and bovine serum albumin (BSA) were selected as model drug and protein, respectively. The SIA system was used for sampling, introduction and propulsion of drug towards to the monolithic column. Association equilibrium constants, binding capacity at various temperatures and thermodynamic parameters (free energy DeltaG, enthalpy DeltaH) of the binding reaction of naproxen are calculated by using frontal analysis mathematics. The variation of incubation time and its effect in on-line binding mode was also studied. The results indicated that naproxen had an association equilibrium constant of 2.90 x 10(6)M(-1) at pH 7.4 and 39 degrees C for a single binding site. The associated change in enthalpy (DeltaH) was -27.36 kcal mol(-1) and the change in entropy (DeltaS) was -73 cal mol(-1)K(-1) for a single type of binding sites. The location of the binding region was examined by competitive binding experiments using a biphosphonate drug, alendronate (ALD), as a competitor agent. It was found that the two drugs occupy the same class of binding sites on BSA. All measurements were performed with fluorescence (lambda(ext)=230 nm, lambda(em)=350 nm) and spectrophotometric detection (lambda=280 nm).

Animals↗
PubMed2006

Penetration of moxifloxacin into sternal bone of patients undergoing routine cardiopulmonary bypass surgery.

This study investigated plasma and bone concentrations of moxifloxacin following a single intravenous dose of 400mg to consider its potential role in the treatment of osteomyelitis. Eight patients who underwent routine cardiopulmonary bypass surgery were enrolled in the study. Plasma and bone samples were collected 2h and 5h after the end of infusion. High performance liquid chromatography was used for the determination of moxifloxacin concentrations. Mean plasma concentrations were 3.36 microg/mL and 2.93 microg/mL at 2h and 5h after the end of infusion. The concentrations in the body and manubrium of the sternal bone were 1.65 microg/g and 1.64 microg/g at 2h and 1.4 microg/g and 1.45 microg/g at 5h, respectively. Moxifloxacin showed good penetration into bone and could be considered for the treatment of osteomyelitis.

Aged↗
PubMed2006

Molecular imprinting of natural flavonoid antioxidants: application in solid-phase extraction for the sample pretreatment of natural products prior to HPLC analysis.

As shown in the past years, SPE based on molecularly imprinted polymers (MIPs) may provide significant enhancement of selectivity in sample preparation and analyte preconcentration. The objective of this work was the fabrication of MIPs for the specific adsorption of rutin and quercetin. The two flavonoids were used as the template molecules for the preparation of MIP phases in a self-assembly (noncovalent) approach. The produced MIPs were validated with regard to the imprinting efficiency as media for LC and SPE. The retention behavior of several flavonoid compounds was studied using as stationary phases imprinted, control nonimprinted polymers, and commercial silica-based materials. MIPs were applied as materials for the selective SPE and preconcentration of the flavonoids from white and red wine, orange juice, and tea. The collected fractions were analyzed by high-pressure LC. MIP-SPE facilitated specific analyte isolation and effective sample clean-up. The results show that molecularly imprinted SPE can be a useful tool for the simple, selective, and cost-effective pretreatment of samples containing natural antioxidants.

Antioxidants↗
PubMed2006

Tolerance to propofol's sedative effect in mechanically ventilated Rabbits.

Propofol is commonly used for the sedation of critically ill patients undergoing mechanical ventilation. These patients may develop tolerance during long-term administration. Here, we describe the development of tolerance to propofol's sedative effect in rabbits during prolonged mechanical ventilation. Six healthy male New Zealand White rabbits were endotracheally intubated and received propofol by continuous IV infusion to maintain sedation for 48 h. The propofol infusion rate (IR) was adjusted to maintain the desired level of sedation. Assessments of the sedation level were made every 30 min or earlier if there were signs of awakening. Propofol concentrations were measured in arterial plasma after every other IR adjustment, provided there was an adequate level of sedation, using high performance liquid chromatography, and calculations of systemic clearance rates were made. The mortality rate was 100% with a survival period of 30.8 +/- 6.0 h (mean +/- sd). The course of IR adjustments followed a 5-phase pattern: 1) steady IR (mean +/- sd duration; 1.2 +/- 0.6 h), 2) increasing IR (9.4 +/- 5.5 h), 3) steady high-IR (2.3 +/- 1.2 h), 4) decreasing IR (13.7 +/- 1.9 h), and 5) steady low-IR (5.0 +/- 2.7 h). The course of propofol concentrations during the experiment in relation to propofol IR followed a 3-phase pattern: 1) steady concentration with increasing IRs (6.0 +/- 2.7 h), 2) increasing concentrations with increasing IR (5.8 +/- 2.5 h), and 3) increasing concentrations with decreasing IR (18.8 +/- 3.3 h). Propofol systemic clearance rates were progressively increased for 6.0 +/- 2.7 h and then gradually decreased for 24.6 +/- 4.7 h. In conclusion, all rabbits developed tolerance to propofol's sedative effect within the first hours of administration related to changes to the drug's metabolic clearance.

Animals↗
PubMed2005

Application of solid-phase microextraction in the investigation of protein binding of pharmaceuticals.

Protein-drug interactions of seven common pharmaceuticals were studied using solid-phase microextraction (SPME). SPME can be used in such investigations on the condition that no analyte depletion occurs. In multi-compartment systems (e.g. a proteinaceous matrix) only the free portion of the analyte is able to partition into the SPME fiber. In addition if no sample depletion occurs, the bound drug-free drug equilibria are not disturbed. In the present study seven pharmaceuticals (quinine, quinidine, naproxen, ciprofloxacin, haloperidol, paclitaxel and nortriptyline) were assayed by SPME. For quantitative purposes SPME was validated first in the absence of proteins. Calibration curves were constructed for each drug by HPLC-fluorescence and HPLC-UV analysis. SPME was combined to HPLC off-line, desorption occurring in HPLC inserts filled with 200 microL methanol. Binding of each drug to human serum albumin was studied independently. Experimental results were in agreement with literature data and ultrafiltration experiments, indicating the feasibility of the method for such bioanalytical purposes.

Binding, Competitive↗
PubMed2005

Solid phase microextraction gas chromatographic analysis of organophosphorus pesticides in biological samples.

Headspace-solid phase microextraction (HS-SPME) was studied and optimised for the determination of four common organophosphorus pesticides (OPPs) in biological samples. Various parameters controlling SPME were studied: choice of SPME fiber, type and content of salt added, preheating and extraction time, desorption time, extraction temperature. Capillary gas chromatographic analysis with nitrogen phosphorus detection (GC-NPD) facilitates sensitive and selective detection of the OPPs: malathion, parathion, methyl parathion and diazinon. Fenitrothion was used as the internal standard. The method was applied to the determination of the pesticides in human biological specimens: whole blood, blood plasma, urine, cerebrospinal fluid, liver and kidney. Limits of detection ranged from 2 to 55 ng/ml depending on pesticide and type of specimen. The developed methodology overcomes limitations and obstacles of conventional methods such as the use of organic solvents, the formation of emulsions and the tedious-cumbersome procedures. The proposed protocol is seen as an attractive alternative to be used in routine toxicological analysis.

Body Fluids↗
PubMed2004

Chromatographic preconcentration coupled on-line to capillary electrophoresis via a tee-split interface.

Solid-phase extraction (SPE) and capillary electrophoresis (CE) are on-line coupled via a Tee-split interface, which provides hydrodynamic injection of the SPE eluate by flow splitting. The interface allows sample preconcentration independently from the CE separation and prevents sample matrix and washing solvents from entering the separation capillary. The effect of the Tee-split interface on the CE efficiency was examined using enkephalin peptides as model compounds. Most favorable plate numbers were obtained using a split ratio of 1:40. Breakthrough volume, desorption efficiency and elution volume for the C18 micro SPE column (5 mm x 0.5 mm i.d.) were found to be 750 microL, 65% and 1 microL, respectively. The performance of the complete system was demonstrated by the preconcentration and separation of an enkephalin mixture. Plate numbers up to 120,000 were obtained using a sample volume of 250 microL and a split ratio of 1:40. Enkephalin peak areas were linear (R2 = 0.996) over the 10-1000 ng/mL range. UV absorbance concentration limits of detection (SIN = 3) were about 5 ng/mL. For 250 microL injections of 100 ng/mL, the relative standard deviation (n = 5) of peak area was lower than 10%.

Chromatography, Liquid↗
PubMed2004

Synthesis and evaluation of molecularly imprinted polymers for enalapril and lisinopril, two synthetic peptide anti-hypertensive drugs.

Molecularly imprinted polymers (MIPs) for the recognition of enalapril and lisinopril were prepared using 4-vinylpyridine as the functional monomer. Following thermal polymerisation the resulting materials were crushed, ground and sieved. First generation MIPs were produced in protic polar porogenic solvents (mixture of methanol (MeOH) and acetonitrile (ACN)). These MIPs were used and validated as sorbents for solid phase extraction and binding assays. Second generation MIPs were produced with polar aprotic porogenic solvent (DMSO). These polymers were packed in HPLC columns in order to investigate their molecular recognition properties in a dynamic mode. The study of the mobile phase composition included two major parameters: organic modifier content and pH value. Retention factors illustrate selective binding of the template from the imprinted polymers, compared to structurally related compounds.

Angiotensin-Converting Enzyme Inhibitors↗
PubMed2004

Automated sample preparation based on the sequential injection principle. Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography.

A molecularly imprinted polymer (MIP) prepared using caffeine, as a template, was validated as a selective sorbent for solid-phase extraction (SPE), within an automated on-line sample preparation method. The polymer produced was packed in a polypropylene cartridge, which was incorporated in a flow system prior to the HPLC analytical instrumentation. The principle of sequential injection was utilised for a rapid automated and efficient SPE procedure on the MIP. Samples, buffers, washing and elution solvents were introduced to the extraction cartridge via a peristaltic pump and a multi-position valve, both controlled by appropriate software developed in-house. The method was optimised in terms of flow rates, extraction time and volume. After extraction, the final eluent from the extraction cartridge was directed to the injection loop and was subsequently analysed on HPLC. The overall set-up facilitated unattended operation, operation and improved both mixing fluidics and method development flexibility. This system may be readily built in the laboratory and can be further used as an automated platform for on-line sample preparation.

Automation↗
PubMed2003

Determination of amphetamines in human urine by headspace solid-phase microextraction and gas chromatography.

Solid-phase microextraction (SPME) is under investigation for its usefulness in the determination of a widening variety of volatile and semivolatile analytes in biological fluids and materials. Semivolatiles are increasingly under study as analytical targets, and difficulties with small partition coefficients and long equilibration times have been identified. Amphetamines were selected as semivolatiles exhibiting these limitations and methods to optimize their determination were investigated. A 100- micro m polydimethylsiloxane (PDMS)-coated SPME fiber was used for the extraction of the amphetamines from human urine. Amphetamine determination was made using gas chromatography (GC) with flame-ionization detection (FID). Temperature, time and salt saturation were optimized to obtain consistent extraction. A simple procedure for the analysis of amphetamine (AMP) and methamphetamine (MA) in urine was developed and another for 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxy-N-methamphetamine (MDMA) and 3,4-methylenedioxy-N-ethylamphetamine (MDEA) using headspace solid-phase microextraction (HS-SPME) and GC-FID. Higher recoveries were obtained for amphetamine (19.5-47%) and methamphetamine (20-38.1%) than MDA (5.1-6.6%), MDMA (7-9.6%) and MDEA (5.4-9.6%).

Amphetamines↗
PubMed2003

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule.

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.

Animals↗