PubMed Health⌕ Search

Biomedical subjects

Geraldine L Richmond

Publications and source records attributed to Geraldine L Richmond.

12 recordsLinked to original sources

Spectroscopic studies of solvated hydrogen and hydroxide ions at aqueous surfaces.

Measuring the molecular properties of the surface of acidic and basic aqueous solutions is essential to understanding a wide range of important biological, chemical, and environmental processes on our planet. In the present studies, vibrational sum-frequency spectroscopy (VSFS) is employed in combination with isotopic dilution experiments at the vapor/water interface to elucidate the interfacial water structure as the pH is varied with HCl and NaOH. In acidic solutions, solvated proton species are seen throughout the interfacial region, and they alter the hydrogen bonding between water molecules in ways that reflect their depth in the interfacial region. At the higher frequencies of the OH stretch region, there is spectral evidence for solvated proton species residing in the topmost layers of the interfacial region. As reported in previous VSF studies, more strongly bound solvated proton species are observed at lower OH stretching frequencies. The solvated proton species that have stronger hydrogen bonding are similar in structure to those found in bulk acid solutions and likely reside somewhat deeper in the interfacial region. There is also evidence of OH stretching from solvated protons and relatively strong hydrogen bonding in the solvation sphere that is similar to other solvated ions. In contrast, water molecules solvating OH(-) ions show relatively weak hydrogen bonding and significantly less interfacial order. VSF spectra are acquired under multiple polarizations to provide crucial information for the interpretation of the spectra and for the determination of interfacial structure.

Hydrogen↗

Understanding the population, coordination, and orientation of water species contributing to the nonlinear optical spectroscopy of the vapor-water interface through molecular dynamics simulations.

Molecular dynamics simulations are used to deconvolve the vibrational spectral features of the vapor-water interface based on molecular environment. A simple geometric description of hydrogen bonding is deployed to identify the OH stretch modes that comprise the vibrational sum-frequency spectrum of the vapor-water interface with direct comparison to our experimental results. The population densities of different species of water molecules are presented as functions of interfacial depth and orientation. It is found that surface water molecules that possess one proton donor bond and one proton acceptor bond make the dominant contribution to both the SSP- and SPS-polarized spectral responses and are located within an angstrom of the Gibbs dividing surface.

Journal Article↗

Differing adsorption behavior of environmentally important cyanophenol isomers at the air-water interface.

Vibrational sum-frequency spectroscopy and surface tensiometry have been used to study the adsorption of m- and p-cyanophenol at the air-water interface. Spectra of the cyano (CN) group under different polarization schemes are utilized to determine its hydrogen bonding environment and orientation. For both isomers, it is found that the cyano group is hydrogen bonded at the interface but that the CN orientation is independent of surface density. The average CN tilt angle (theta(0)), however, is found to differ between the isomers, such that the CN group points down toward the aqueous phase for m-cyanophenol (theta(0) = 96-106 degrees ) but points up toward the vapor phase for the p-cyanophenol (theta(0) = 65-80 degrees ). In addition, this average tilt angle is distributed over a narrow range, sigma(0) < 10 degrees for the meta isomer and sigma(0) < 16 degrees for the para isomer.

Journal Article↗

Adsorption and reaction of CO2 and SO2 at a water surface.

The orientation and hydrogen bonding of water molecules in the vapor/water interfacial region in the presence of SO2 and CO2 gas are examined using vibrational sum-frequency spectroscopy (VSFS) to gain insight into the adsorption and reactions of these gases in atmospheric aerosols. The results show that an SO2 surface complex forms when the water surface is exposed to an atmosphere of SO2 gas. Reaction of SO2 with interfacial water leads to other spectral changes that are examined by studying the VSF spectra and surface tension isotherms of several salts added to the aqueous phase, specifically NaHSO3, NaHCO3, Na2SO3, Na2CO3, Na2SO4, and NaHSO4. The results are compared with similar studies of CO2 adsorption and reaction at the surface. A weakly bound surface complex is not observed with CO2.

Journal Article↗

SO2:H2O surface complex found at the vapor/water interface.

A weakly bonded SO2:H2O surface complex is found at the vapor/water interface prior to the reaction and dissolution of SO2 into the aqueous phase. The results have important implications for understanding the formation of atmospheric aerosols and understanding the atmospheric sulfur cycle.

Journal Article↗

Adsorption of organosulfur species at aqueous surfaces: molecular bonding and orientation.

Four sulfur-containing compounds important to tropospheric chemistry have been examined at the vapor/H2O and vapor/D2O interfaces. These adsorbates, DMS, DMSO, DMSO2, and DMSO3, were studied by surface tension and vibrational sum-frequency spectroscopy (VSFS). Each adsorbate is surface active and each orients with the hydrophobic methyl groups pointed out of the plane of the interface. Their influence on the interfacial water structure is adsorbate dependent. Strong and weak interactions with surface water are observed as well as reorientation of subsurface water molecules, resulting in an increase in interfacial thickness.

Journal Article↗

Whole-molecule approach for determining orientation at isotropic surfaces by nonlinear vibrational spectroscopy.

Nonlinear vibrational spectroscopies such as visible-infrared sum-frequency spectroscopy may serve as powerful probes of interfacial structure. Obtaining quantitative orientation information, however, has been limited by the required knowledge of the corresponding molecular-level nonlinear optical properties. We provide a general scheme for calculating the vibrational hyperpolarizability of any infrared- and Raman-active mode, regardless of the molecular symmetry or complexity of the structure. Our method involves all atoms and therefore does not rely on making any local mode approximations. We show how this information is used together with experimental data to arrive at the tilt and twist angles of a surfactant headgroup at the air/water interface. Since our approach is completely general, it may be used for the analysis of any adsorbate at an isotropic interface.

Spectrum Analysis↗

Surfactant headgroup orientation at the air/water interface.

We have used vibrational sum-frequency spectroscopy to provide the first measurement of the spectrum and orientation of the polar headgroup of a charged alkyl surfactant at the air/water interface. Sum-frequency spectra of sodium dodecyl sulfate (SDS) are used to arrive at all participating elements of the second-order susceptibility tensor. We use these chi(2) elements, together with calculated values of the hyperpolarizability, to determine the tilt of the S-O bond attached to the alkyl chain and the twist of the S-O-C plane. Thus, a full characterization of the orientation of the surfactant headgroup has been achieved. This is the first demonstration of the feasibility of sum-frequency measurements of sulfate modes in the 1100 cm-1 region, opening possibilities for future investigations of surfactant behavior in this spectral region at aqueous and solid interfaces.

Air↗

Surfactant adsorption at the salt/water interface: comparing the conformation and interfacial water structure for selected surfactants.

We report in situ spectroscopic measurements monitoring the adsorption of a series of carboxylate surfactants onto the surface of the semisoluble, ionic solid fluorite (CaF2). We employ the surface-specific technique, vibrational sum-frequency spectroscopy (VSFS), to examine the effect that surfactant adsorption has on the bonding interactions and orientation of interfacial water molecules through the alteration of the electric properties in the interfacial region. In addition, we report on the chain length and headgroup dependence of the formation of hydrophobic self-assembled monolayers on the surface of the solid phase. Differences in chain length and headgroup functionality lead to large changes in the adsorption behavior and structuring of the monolayers formed and the interactions of interfacial water molecules with these monolayers. Fundamental studies such as these are essential for understanding the mechanisms involved in the surfactant adsorption process, information that is important for industrially relevant processes such as mineral ore flotation, waste processing, and petroleum recovery.

Journal Article↗

Spiers Memorial Lecture. Recent experimental advances in studies of liquid/liquid interfaces.

Liquid/liquid interfaces play a key role in many important processes. Studying the molecular structure and interactions that occur at these interfaces can aid in our understanding of more complicated processes such as molecular transport across cell membranes. A variety of techniques have been applied to this pursuit. Here we present selected examples of exciting recent studies using different techniques to examine liquid/liquid interfaces.

Journal Article↗

Mid-infrared second-order susceptibility of alpha-quartz and its application to visible-infrared surface sum-frequency spectroscopy.

We provide the first account of the second-order susceptibility of quartz down to 10 mum (1000 cm(-1)) and show how this data may be used along with the sum-frequency response of an amorphous gold surface to elucidate the nonlinear susceptibility of any material in the mid-infrared region. Crystalline quartz is an established material for use in second-harmonic and sum-frequency generation studies of new systems, on account of its well-characterized linear and nonlinear optical properties. Previous knowledge of its nonlinear susceptibility has been limited to its transparent region, wavelengths shorter than about 3 mum. Longer wavelength chi((2)) values for quartz are particularly important for techniques such as vibrational sum-frequency spectroscopy which are expanding into the mid-IR with the increasing availability of widely tunable infrared laser sources.

Journal Article↗

Ti: sapphire-based picosecond visible-infrared sum-frequency spectroscopy from 900-3100 cm-1.

Visible-infrared sum-frequency spectroscopy is ideally suited to the study of surfaces and interfaces. This paper introduces new sum-frequency spectroscopy instrumentation that we have developed with two novel features: (1) stable and robust infrared generation in the 900-3100 cm(-1) (11-3.2 microm) region using an amplified Ti : sapphire oscillator with a home-built OPG/OPA, and (2) continuous tuning over either 900-2700 cm(-1) (11-3.7 microm) or 1800-3100 cm(-1) (5.5-3.2 microm) in a single experiment. All practical details of baseline correction issues due to the picosecond pulses (including variation in infrared (IR) energy, spatial and temporal overlap, Fresnel coefficients) are addressed while demonstrating signal throughout this region from an amorphous gold surface. A sum-frequency spectrum from an oriented polymer is shown as a complete example of the data treatment, which reveals the vibrational modes accessible in this wavelength region.

Algorithms↗