PubMed Health⌕ Search

Biomedical subjects

Gheorghe Fundueanu

Publications and source records attributed to Gheorghe Fundueanu.

7 recordsLinked to original sources
PubMed2006

Cellulose acetate butyrate-pH/thermosensitive polymer microcapsules containing aminated poly(vinyl alcohol) microspheres for oral administration of DNA.

The aim of this work is to safely transport bioadhesive microspheres loaded with DNA to intestine and to test their bioadhesive properties. Poly(vinyl alcohol) (PVA) microspheres were prepared by dispersion reticulation with glutaraldehyde and further aminated. These microspheres were firstly loaded with plasmid DNA by electrostatic interactions and then entrapped in cellulose acetate butyrate (CAB) microcapsules for gastric protection. The entrapped PVA microspheres do not have enough force by swelling to produce the rupture of CAB shell, therefore the resistance of microcapsules was weakened by incorporating different amount of the pH/thermosensitive polymer (SP) based on poly(N-isopropylacrylamide-co-methyl methacrylate-co-methacrylic acid) (NIPAAm-co-MM-co-MA). This polymer is insoluble in gastric juice at pH 1.2 and 37 degrees C, but quickly solubilized in intestinal fluids (pH 6.8 and pH 7.4). Therefore, DNA loaded PVA microspheres were not expelled in acidic media but were almost entirely discharged in small intestine or colon. The integrity of DNA after entrapment was tested by agarose gel electrophoresis indicating that no DNA degradation occurs during encapsulation. The percentage of adhered microspheres on the mucus surface of everted intestinal tissue was 65+/-18% for aminated PVA microspheres without DNA and almost 50+/-15% for those loaded with DNA. Non-aminated PVA microspheres display the lowest adhesive properties (33+/-12%). In conclusion DNA loaded microspheres were progressively discharged in intestine. The integrity of DNA was not modified after entrapment and release, as proved by agarose gel electrophoresis. Both loaded and un-loaded aminated microspheres display good bioadhesive properties.

Administration, Oral↗
PubMed2005

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs.

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.

Acrylamides↗
PubMed2005

Cellulose acetate butyrate microcapsules containing dextran ion-exchange resins as self-propelled drug release system.

Sulfopropylated dextran microspheres (SP-Ms), (Dm = 80 microm) loaded with a water soluble drug (Tetracycline HCl), were included in cellulose acetate butyrate (CAB) microcapsules. Spherical CAB microcapsules were obtained by oil in water (o/w) solvent evaporation method in the presence of an inert solvent as cyclohexane (CyH) or n-hexane (N-Hex), and different excipients (Phospholipon, Tween, Span, Eudragit RS 100). Chloroform was found to be the best solvent for the preparation of the microcapsules. Also, the sphericity as well as the porosity of the microcapsules was controlled by the presence of an inert solvent. The final concentration of the drug in CAB microparticles was up to 25% (w/w). The key factors for the successful preparation were also the viscosity of the polymer, while the wettability of the resulted microcapsules, the temperature of the preparation, and the porosity have modulated the release of the drug. The higher is the amount of encapsulated microspheres the thinner is the CAB wall between the compartments created by their incorporation. When these microspheres come in contact with the release medium, the pressure created by their swelling breaks the polymer film and the drug starts to be released. The more drug is released in phosphate buffer the higher is the swelling degree of the encapsulated ion exchange resins and the force created by their supplementary swelling will break the more resistants walls. In this way a self-propelled drug release is achieved, until almost all drug was eliberated.

Anti-Bacterial Agents↗
PubMed2004

Preparation and characterisation of poly(vinyl alcohol)/cyclodextrin microspheres as matrix for inclusion and separation of drugs.

Poly(vinyl alcohol) (PVA) microspheres containing cyclodextrin (CD) were obtained by chemical cross-linking with glutaraldehyde of an acidified mixture solution of PVA and alpha-, beta- or gamma-CD. The amount of linked CD in microspheres, estimated by tetrazolium blue method, decreases in the order beta- > gamma- > alpha-CD. The dimensions of PVA/gamma-CD microspheres are much higher than those of PVA/alpha- and beta-CD. The cross-linking density of microspheres was estimated by the amount of iodine retained by the polymer matrix. The pore size as well as the porous volume of PVA/CD microspheres decrease significantly on increasing the amount of glutaraldehyde, but are enough large to permit the access of drugs to the CD cavity. In order to test the PVA/CD microsphere inclusion ability, the microspheres were packed in a glass column and the liquid chromatographic behaviour by isocratic elution of different drugs or typical organic compounds, taken as model drugs, was investigated.

Chemistry, Pharmaceutical↗
PubMed2004

Preparation and characterization of starch/cyclodextrin bioadhesive microspheres as platform for nasal administration of Gabexate Mesylate (Foy) in allergic rhinitis treatment.

Bioadhesive and biodegradable microspheres were obtained by chemical cross-linking with epichlorohydrin of an alkaline solution of a mixture of starch and alpha-, beta-, or gamma-cyclodextrin (CyD). Microspheres were characterized by scanning electron microscopy, swelling degree, and water retention. The percentage of the effective CyD in microspheres was estimated by measuring the amount of iodine and typical organic compounds (TOCs) retained in the hydrophobic cavity of CyD. Gabexate Mesylate (trade name Foy); GM), an antiallergic drug, was included in microspheres by soaking in an aqueous solution containing the drug, followed by solvent evaporation or lyophilization. UV, IR, and DSC data indicated that despite the fact that GM is a hydrophilic drug, its hydrophobic moiety close to the benzene ring is able to penetrate the CyD cavity and to form stable inclusion complexes. Values of the association equilibrium constant for GM binding to CyD, obtained by UV differential spectroscopy, indicated that the affinity of the drug for alpha- and gamma-CyD is higher than that for beta-CyD. In vitro, GM was gradually released during 1h. Even if the release rate of the drug is relatively fast, the microspheres might actually provide the best platform since the material adheres to the nasal mucosa which was proved by adhesion tests. The GM integrity was checked by comparing its anti-trypsin activity before and after release.

Adhesives↗
PubMed2003

Pullulan-cyclodextrin microspheres. A chromatographic approach for the evaluation of the drug-cyclodextrin interactions and the determination of the drug release profiles.

Pullulan microspheres containing cyclodextrin (CyD) were obtained by chemical crosslinking with epichlorohydrin of an alkaline solution of pullulan (Pul) and alpha-, beta- or gamma-CyD. The amount of alpha-, beta- and gamma-CyD in microspheres was 120, 156, and 138 micromol/g, respectively, as determined from the percentage of iodine incorporated in the hydrophobic cavity of CyD's. Microspheres were packed in a glass column and the liquid chromatographic behaviour by isocratic elution of different drugs or typical organic compounds (TOC), taken as model drugs, was investigated. The increase of the retention volume (V(R)) of each compound, depending on the interaction(s) between CyD's cavity and the considered molecule, is characterized by a broadening of the peaks. The interaction coefficient K, corresponding to the ratio between the V(R) value of each tested molecule on Pul-alpha-, Pul-beta- and Pul-gamma-CyD active stationary phase and the V(R) value of benzoic acid on St/maltodextrin neutral stationary phase, was determined. According to K values, the accurate prediction can be done on the potential drugs to be conditioned in suitable CyD cavity. Values of K allow to anticipate the release profiles of drugs considered.

Cyclodextrins↗