Biomedical subjects

Giacomo Cao

Publications and source records attributed to Giacomo Cao.

6 recordsLinked to original sources

PubMed2006

Remediation of heavy metals contaminated soils by ball milling.

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluated by analyzing the leachable fraction of Pb(II) obtained through the "synthetic precipitation leaching procedure". The reduction of leachable Pb(II) from certain synthetic soils, i.e., bentonitic, sandy and kaolinitc ones, was obtained under specific milling regimes. For example, for the case of bentonitic soils characterized by a Pb(II) concentration in the solid phase equal to 954.4 mg kg(-1), leachable Pb(II) was reduced, after 7 h of mechanical treatment, from 1.3 mg l(-1) to a concentration lower than the USEPA regulatory threshold (i.e., 0.015 mg l(-1) for drinkable water). Similar results were obtained for sandy and kaolinitic soils. X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and granulometric analyses revealed no significant alterations of the intrinsic character of sandy and bentonitic soils after milling except for a relatively small increase of particles size and a partial amorphization of the treated soil. On the other hand, the mechanical treatment caused the total amorphization of kaolinitic soil. The increase of immobilization efficiency can be probably ascribed to specific phenomena induced by mechanical treatment such as entrapment of Pb(II) into aggregates due to aggregation, solid diffusion of Pb(II) into crystalline reticulum of soil particles as well as the formation of new fresh surfaces (through particle breakage) onto which Pb(II) may be irreversibly adsorbed.

Adsorption↗

PubMed2006

A novel simulation model for engineered cartilage growth in static systems.

A novel mathematical model to simulate the growth of engineered cartilage in static systems is proposed. This model is based on material balances for the involved species (glycosaminoglycan and collagen, both pertaining to extracellular matrix), as well as mass-structured population balance for simulating cell growth and its proliferation within the scaffold. This model may simulate tissue growth on static culture taking place in Petri dishes, static flasks, and well plates for different types of scaffolds (i.e., poly(glycolic acid) [PGA], PGA/poly(l-lactic acid), and collagen sponge). This work aimed to demonstrate that the model approach proposed in previous works, regarding engineered cartilage growth on PGA scaffolds performed in rotating bioreactors, may also be applied to different scaffolds and system configurations. In particular, the balance equation for simulating collagen production is introduced, as well as the use of spatial averaging over the spatial region to compare experimental data with the model. Experimental data from the literature in terms of cells, glycosaminoglycans, and collagen content have been successfully compared with model results, thus demonstrating the validity of the proposed model, as well as its predictive capability.

Animals↗

PubMed2003

Chemical recycling of poly(ethylene terephthalate) (PET) by hydrolysis and glycolysis.

In this paper we review an interesting method of PET recycling, i.e. chemical recycling; it is based on the concept of depolymerizing the condensation polymer through solvolytic chain cleavage into low molecular products which can be purified and reused as raw materials for the production of high-quality chemical products. In this work our attention is confined to the hydrolysis (neutral, acid and alkaline) and glycolysis processes of PET chemical recycling; operating conditions and mechanism of each method are reported and described. The neutral hydrolysis has an auto accelerating character; two kinetic models have been proposed: an half-order and a second order kinetic model. The acid hydrolysis could be explained by a modified shrinking core model under chemical reaction control and the alkaline hydrolysis by a first-order model with respect to hydroxide ion concentration. To describe glycolysis, two different kinetic models have been proposed where EG can act or not as internal catalyst. Further experimental and theoretical investigations are required to shed light on the promising processes of PET chemical recycling reviewed in this work.

Conservation of Natural Resources↗

PubMed2003

Development of processes for environmental protection based on self-propagating reactions.

The possibility of exploiting self-propagating reactions for environmental protection is discussed in this paper. In particular, results obtained at the laboratory scale and related to the fixation and consolidation of high level radioactive wastes, the recycling of silicon sludge and aluminum dross produced by semiconductor industries and aluminum foundries, the treating and recycling of a highly toxic solid waste from electrolytic zinc plants, and the degradation of chlorinated aromatics, are examined with particular emphasis on the latter case. Specifically, the self-propagating destruction of hexachlorobenzene and 2-(2-4-dichlorophenoxy)-propanoic acid with calcium hydride as reductive substrate is demonstrated. In fact, the heat liberated by the reactions involved is large enough to guarantee the self-sustaining character of the process within a wide range of reactants compositions. Moreover, no residual chlorinated organic compounds were found in the final solid product. Some reactor engineering aspects, as well as other significant future scientific and technological issues, are also addressed in view of large-scale applicability of processes based on self-propagating reactions. To date, the batch reactor technology seems to be more easily applicable, although the use of continuous reactors is not excluded in the next future.

2,4-Dichlorophenoxyacetic Acid↗

PubMedDate not supplied

Adsorption of organic compounds onto activated carbons from recycled vegetables biomass.

The removal of organic species from aqueous solution by activated carbons is investigated. The latter ones are prepared from olive husks and almond shells. A wide range of surface area values are obtained varying temperature and duration of both carbonization and activation steps. The adsorption isotherm of phenol, catechol and 2,6-dichlorophenol involving the activated carbons prepared are obtained at 25 degrees C. The corresponding behavior is quantitatively correlated using classical isotherm, whose parameters are estimated by fitting the equilibrium data. A two component isotherm (phenol/2,6-dichlorophenol) is determined in order to test activated carbon behavior during competitive adsorption.

Adsorption↗

PubMedDate not supplied

Mechanochemical degradation of aromatic sulfonic acids.

Sulfonic acids and sulfonates are widely used as surfactants in various industrial processes. Although partial biodegradation occurs, their release in the environment has determined a widespread pollution problem due to their remarkable tendency towards accumulation. For this reason, various methodologies to effectively degrade sulfonic acids and sulfonates in real matrices are currently under investigation. In this study, we focused our attention on the mechanochemical degradation of the 1,5-naphthalene disulfonic acid using strongly reducing agents such as pure Mg and Ca metals. The mechanochemical processing induced either a gradual degradation of the organic compound or a combustion-like reaction depending upon the experimental conditions. A partial degradation of the sulfonic acid was observed as a result of gradual reactions. An almost complete removal of the pollutant was instead observed after combustion-like reactions.

Calcium↗