PubMed Health⌕ Search

Biomedical subjects

Gianfranco Gilardi

Publications and source records attributed to Gianfranco Gilardi.

14 recordsLinked to original sources

Engineering human cytochrome P450 enzymes into catalytically self-sufficient chimeras using molecular Lego.

The membrane-bound human cytochrome P450s have essential roles in the metabolism of endogenous compounds and drugs. Presented here are the results on the construction and characterization of three fusion proteins containing the N-terminally modified human cytochrome P450s CYP2C9, CY2C19 and CYP3A4 fused to the soluble NADPH-dependent oxidoreductase domain of CYP102A1 from Bacillus megaterium. The constructs, CYP2C9/BMR, CYP2C19/BMR and CYP3A4/BMR are well expressed in Escherichia coli as holo proteins. The chimeras can be purified in the absence of detergent and the purified enzymes are both active and correctly folded in the absence of detergent, as demonstrated by circular dichroism and functional studies. Additionally, in comparison with the parent P450 enzyme, these chimeras have greatly improved solubility properties. The chimeras are catalytically self-sufficient and present turnover rates similar to those reported for the native enzymes in reconstituted systems, unlike previously reported mammalian cytochrome P450 fusion proteins. Furthermore the specific activities of these chimeras are not dependent on the enzyme concentration present in the reaction buffer and they do not require the addition of accessory proteins, detergents or phospholipids to be fully active. The solubility, catalytic self-sufficiency and wild-type like activities of these chimeras would greatly simplify the studies of cytochrome P450 mediated drug metabolism in solution.

Amino Acid Motifs↗

Functional characterisation of an engineered multidomain human P450 2E1 by molecular Lego.

The human cytochrome P450s constitute an important family of monooxygenase enzymes that carry out essential roles in the metabolism of endogenous compounds and foreign chemicals. We present here results of a fusion between a human P450 enzyme and a bacterial reductase that for the first time is shown does not require the addition of lipids or detergents to achieve wild-type-like activities. The fusion enzyme, P450 2E1-BMR, contains the N-terminally modified residues 22-493 of the human P450 2E1 fused at the C-terminus to residues 473-1049 of the P450 BM3 reductase (BMR). The P450 2E1-BMR enzyme is active, self-sufficient and presents the typical marker activities of the native human P450 2E1: the hydroxylation of p-nitrophenol (KM=1.84+/-0.09 mM and kcat of 2.98+/-0.04 nmol of p-nitrocatechol formed per minute per nanomole of P450) and chlorzoxazone (KM=0.65+/-0.08 mM and kcat of 0.95+/-0.10 nmol of 6-hydroxychlorzoxazone formed per minute per nanomole of P450). A 3D model of human P450 2E1 was generated to rationalise the functional data and to allow an analysis of the surface potentials. The distribution of charges on the model of P450 2E1 compared with that of the FMN domain of BMR provides the ground for the understanding of the interaction between the fused domains. The results point the way to successfully engineer a variety of catalytically self-sufficient human P450 enzymes for drug metabolism studies in solution.

Biotransformation↗

Directed evolution of enzymes for product chemistry.

This review discusses the achievements of directed evolution of enzymes relevant to natural and unnatural product chemistry focusing on the period 1998-2004, citing 156 references. A few selected papers published before 1998 are also cited for their fundamental relevance, together with additional reviews covering other aspects of directed evolution applied to closely related topics. An overview of the latest methods applied in directed evolution is given in the introduction, together with a range of approaches for the selection of variants of enzymes with desired catalytic properties. All classes of enzymes are systematically covered.

Catalysis↗

Proton-coupled electron transfer of flavodoxin immobilized on nanostructured tin dioxide electrodes: thermodynamics versus kinetics control of protein redox function.

In this paper, we report a spectroelectrochemical investigation of proton-coupled electron transfer in flavodoxin D. vulgaris Hildenborough (Fld). Poly-L-lysine is used to promote the binding of Fld to the nanocrystalline, mesoporous SnO(2) electrodes. Two reversible redox couples of the immobilized Fld are observed electrochemically and are assigned by spectroelectrochemistry to the quinone/semiquinone and semiquinone/hydroquinone couples of the protein's flavin mononucleotide (FMN) redox cofactor. Comparison with control data for free FMN indicates no contamination of the Fld data by dissociated FMN. The quinone/semiquinone and semiquinone/hydroquinone midpoint potentials (E(q/sq) and E(sq/hq)) at pH 7 were determined to be -340 and -585 mV vs Ag/AgCl, in good agreement with the literature. E(q/sq) exhibited a pH dependence of 51 mV/pH. The kinetics of these redox couples were studied using cyclic voltammetry, cyclic voltabsorptometry, and chronoabsorptometry. The semiquinone/quinone reoxidation is found to exhibit slow, potential-independent but pH-sensitive kinetics with a reoxidation rate constant varying from 1.56 s(-)(1) at pH 10 to 0.0074 s(-)(1) at pH 5. The slow kinetics are discussed in terms of a simple kinetics model and are assigned to the reoxidation process being rate limited by semiquinone deprotonation. It is proposed that this slow deprotonation step has the physiological benefit of preventing the undesirable loss of reducing equivalents which results from semiquinone oxidation to quinone.

Crystallization↗

Direct electrochemistry of immobilized human cytochrome P450 2E1.

This communication reports the first electrochemical study of the human P450 2E1 either absorbed or covalently linked to different electrode surfaces. Glassy-carbon and gold electrodes gave reversible electrochemical signals of an active P450 2E1. Molecular modeling of the enzyme helped to rationalize the results. A monolayer coverage was obtained on gold modified with cystamine/maleimide that covalently linked surface accessible cysteines of P450 2E1. The midpoint potential measured for the oriented P450 2E1 was -177 +/- 5 mV comparable to that of the FeIII/FeII of other P450 enzymes. The observed electron-transfer rate for this electrode was 10 s-1. The turnover of the active enzyme was measured with the P450 2E1 specific substrate p-nitrophenol, resulting in a KM of 130 +/- 3 muM and the formation of 2.2 muM of the p-nitrocatechol product upon application of a -300 mV bias.

Carbon↗

Cyclic voltammetry and voltabsorptometry studies of redox proteins immobilised on nanocrystalline tin dioxide electrodes.

Protein film cyclic voltammetry is a well-established technique for the study of redox proteins immobilised on electrode surfaces. In this paper, we use nanostructured SnO(2) electrodes to demonstrate that cyclic voltabsorptometry is an effective, complimentary approach to such studies of protein redox function. We exemplify this approach using two different redox systems: microperoxidase-11 (MP-11) and flavodoxin Desulfovibrio vulgaris Hildenborough (Fld). Both systems were immobilised on nanocrystalline SnO(2) electrodes and the resulting films investigated by simultaneous cyclic voltammetry and voltabsorptometry. We demonstrate that cyclic voltabsorptometry allows the unambiguous and background free observation of redox reactions for both systems studied.

Absorption↗

The oxygenase component of phenol hydroxylase from Acinetobacter radioresistens S13.

Phenol hydroxylase (PH) from Acinetobacter radioresistens S13 represents an example of multicomponent aromatic ring monooxygenase made up of three moieties: a reductase (PHR), an oxygenase (PHO) and a regulative component (PHI). The function of the oxygenase component (PHO), here characterized for the first time, is to bind molecular oxygen and catalyse the mono-hydroxylation of substrates (phenol, and with less efficiency, chloro- and methyl-phenol and naphthol). PHO was purified from extracts of A. radioresistens S13 cells and shown to be a dimer of 206 kDa. Each monomer is composed by three subunits: alpha (54 kDa), beta (38 kDa) and gamma (11 kDa). The gene encoding PHO alpha (named mopN) was cloned and sequenced and the corresponding amino acid sequence matched with that of functionally related oxygenases. By structural alignment with the catalytic subunits of methane monooxygenase (MMO) and alkene monooxygenase, we propose that PHO alpha contains the enzyme active site, harbouring a dinuclear iron centre Fe-O-Fe, as also suggested by spectral analysis. Conserved hydrophobic amino acids known to define the substrate recognition pocket, are also present in the alpha-subunit. The prevalence of alpha-helices (99.6%) as studied by CD confirmed the hypothized structural homologies between PHO and MMO. Three parameters (optimum ionic strength, temperature and pH) that affect kinetics of the overall phenol hydroxylase reaction were further analyzed with a fixed optimal PHR/PHI/PHO ratio of 2/1/1. The highest level of activity was evaluated between 0.075 and 0.1 m of ionic strength, the temperature dependence showed a maximum of activity at 24 degrees C and finally the pH for optimal activity was determined to be 7.5.

Acinetobacter↗

Comparison of the refined crystal structures of wild-type (1.34 A) flavodoxin from Desulfovibrio vulgaris and the S35C mutant (1.44 A) at 100 K.

Engineered flavodoxins in which a surface residue has been replaced by an exposed cysteine are useful modules to link multi-domain redox proteins obtained by gene fusion to electrode surfaces. In the present work, the crystal structure of the S35C mutant of Desulfovibrio vulgaris flavodoxin in the oxidized state has been determined and compared with a refined structure of the wild type (wt). The structure of wt flavodoxin (space group P4(3)2(1)2, unit-cell parameters a = 50.52, b = 50.52, c = 138.59 A) at 1.34 A resolution has been refined to R = 0.16 and R(free) = 0.18. The structure of the S35C mutant (space group P4(3)2(1)2, unit-cell parameters a = 50.55, b = 50.55, c = 138.39 A) at 1.44 A resolution has been refined to R = 0.13 and R(free) = 0.16. Data sets were collected with synchrotron radiation at 100 K. In the S35C mutant, the Cys35 thiol group points towards a hydrophobic region, whilst in the wt the Ser35 hydroxyl group points towards a more polar region. The solvent exposure of Cys35 is 43 A(2), of which 8 A(2) is for the sulfur. This is comparable to the exposure of 48 A(2) found for the wt Ser35, where that of the hydroxyl oxygen is also 8 A(2).

Amino Acid Sequence↗

Tuning the reduction potential of engineered cytochrome c-553.

Cytochrome c-553 from Desulfovibrio vulgaris exhibits a highly exposed heme and an unusually low reduction potential with respect to other c-type cytochromes. Solvent heme exposure has been indicated as one of the most important factors in modulating the midpoint potential of the redox center. To test this hypothesis, a unique surface-exposed cysteine has been substituted for either M23 or G51 to produce the corresponding mutants and allow the formation of homodimers through a specific disulfide bridge. The reduction potentials, determined via spectroelectrochemistry, show an increase from +20 +/- 5 mV for the wt to +88 +/- 5 and +105 +/- 5 mV for the M23C-M23C homodimer and G51C-G51C homodimer, respectively. Chemical denaturation of the homodimers leads to parameters related to the hydrophobicity (m) and the number of buried side chains (n(B)), which suggest a decrease of exposure of the heme as a result of dimerization. These results are consistent with the heme-accessible surface area (ASA) calculated from a computer model of the homodimers. The ASA values show a decrease from 73 A(2) for the wt to 66 and 50 A(2) per heme for the M23C-M23C homodimer and G51C-G51C homodimer, respectively. The trend of the m- and n(B)-values, the degree of solvent accessibility, and the midpoint potential observed upon formation of the homodimers indicate a correlation between the reduction potential values and the exclusion of water from the heme surface.

Amino Acid Substitution↗

High throughput assay for cytochrome P450 BM3 for screening libraries of substrates and combinatorial mutants.

A rapid method for identifying compounds that are potential substrates for the drug metabolising enzyme cytochrome P450 is described. The strategy is based on the detection of a degradation product of NAD(P)H oxidation during substrate turnover by the enzyme expressed in Escherichia coli cells spontaneously lysed under the experimental conditions. The performance of the method has been tested on two known substrates of the wild-type cytochrome P450 BM3, arachidonic (AA) and lauric (LA) acids, and two substrates with environmental significance, the anionic surfactant sodium dodecyl sulfate (SDS), and the solvent 1,1,2,2-tetrachloroethane (TCE). The minimal background signal given from cells expressing cytochrome P450 BM3 in the absence of added substrate is only 3% of the signal in the presence of saturating substrate. Control experiments have proven that this method is specifically detecting NADPH oxidation by catalytic turnover of P450 BM3. The assay has been adapted to a microtitre plate format and used to screen a series of furazan derivatives as potential substrates. Three derivatives were identified as substrates. The method gave a significant different signal for two isomeric furazan derivatives. All results found on the cell lysate were verified and confirmed with the purified enzyme. This strategy opens the way to automated high throughput screening of NAD(P)H-linked enzymatic activity of molecules of pharmacological and biotechnological interest and libraries of random mutants of NAD(P)H-dependent biocatalysts.

Bacterial Proteins↗

Molecular Lego: design of molecular assemblies of P450 enzymes for nanobiotechnology.

This paper reports on the application of the molecular Lego approach to P450 enzymes. Protein domains are used as catalytic (P450 BM3 haem domain and human P450 2E1) or electron transfer (flavodoxin and P450 BM3 reductase) modules. The objectives are to build assemblies with improved electrochemical properties, to construct soluble human P450 enzymes, and to generate libraries of new P450 catalytic modules based on P450 BM3. A rationally designed, gene-fused assembly (BMP-FLD) was obtained from the soluble haem domain of cytochrome P450 BM3 from Bacillus megaterium (BMP) and flavodoxin from Desulfovibrio vulgaris (FLD). The assembly was expressed successfully and characterised in its active form, displaying improved electrochemical properties. Solubilisation of the human, membrane-bound P450 2E1 (2E1) was achieved by fusing key elements of the 2E1 enzyme with selected parts of P450 BM3. An assembly containing the first 54 residues of P450 BM3, the whole sequence of P450 2E1 from residue 81 and the reductase domain of P450 BM3 was constructed. The 2E1-BM3 assembly was successfully expressed in the cytosol of Escherichia coli. The soluble form of 2E1-BM3 was reduced in carbon monoxide atmosphere and displayed the typical absorption peak at 450 nm, characteristic of a folded and active P450 enzyme. Finally, the alkali method previously developed in this laboratory was used to screen for P450 activity within a library of random mutants of P450 BM3. A number of variants active towards non-physiological substrates, such as pesticides and polyaromatic hydrocarbons were identified, providing new P450 catalytic modules. The combination of these three areas of research provide interesting tools for exploitation in nanobiotechnology.

Bacterial Proteins↗

Biotechnology. Paper Alert.

A selection of interesting papers that were published in the two months before our press date in major journals most likely to report significant results in biotechnology.

Biotechnology↗