Biomedical subjects

Godfrey S Beddard

Publications and source records attributed to Godfrey S Beddard.

14 recordsLinked to original sources

PubMed2005

Comparison of the ATP binding sites of protein kinases using conformationally diverse bisindolylmaleimides.

The conformation of a bisindolylmaleimide may be controlled by the size of a macrocyclic ring in which it is constrained. A range of techniques were used to demonstrate that the tether controls both the ratio of the two limiting conformers (syn and anti) in solution and the extent of conjugation between the maleimide and indole rings. Screening the conformationally diverse bisindolylmaleimides against a panel of protein kinases allowed their ATP binding sites to be compared using a chemical approach which, like sequence alignment, does not require detailed structural information. This approach lead to the conclusion that several AGC group protein kinases (including PKCalpha, PKCbeta, MSK1, p70 S6K, PDK-1, and MAPKAP-K1alpha) may be best inhibited by bisindolylmaleimides which adopt a compressed approximately C2-symmetric anti conformation; in constrast, GSK3beta may be best inhibited by bisindolylmaleimides whose ground state is a distorted syn conformation. It is concluded that PDK-1, whose structure has been determined by X-ray crystallography, and its mutants, may serve as particularly useful surrogates for the study of PKC inhibitors.

Adenosine Triphosphate↗

PubMed2005

Mechanically unfolding the small, topologically simple protein L.

beta-sheet proteins are generally more able to resist mechanical deformation than alpha-helical proteins. Experiments measuring the mechanical resistance of beta-sheet proteins extended by their termini led to the hypothesis that parallel, directly hydrogen-bonded terminal beta-strands provide the greatest mechanical strength. Here we test this hypothesis by measuring the mechanical properties of protein L, a domain with a topology predicted to be mechanically strong, but with no known mechanical function. A pentamer of this small, topologically simple protein is resistant to mechanical deformation over a wide range of extension rates. Molecular dynamics simulations show the energy landscape for protein L is highly restricted for mechanical unfolding and that this protein unfolds by the shearing apart of two structural units in a mechanism similar to that proposed for ubiquitin, which belongs to the same structural class as protein L, but unfolds at a significantly higher force. These data suggest that the mechanism of mechanical unfolding is conserved in proteins within the same fold family and demonstrate that although the topology and presence of a hydrogen-bonded clamp are of central importance in determining mechanical strength, hydrophobic interactions also play an important role in modulating the mechanical resistance of these similar proteins.

Bacterial Proteins↗

PubMed2004

Switching two-state to three-state kinetics in the helical protein Im9 via the optimisation of stabilising non-native interactions by design.

The four-helix protein Im7 folds through an on-pathway intermediate at pH 7.0 and 10 degrees C. By contrast, under these conditions there is no evidence for a populated intermediate in the folding of its more stable homologue, Im9, even in the presence of 0.4 M sodium sulphate. Previous studies using phi-value analysis have shown that the Im7 intermediate is misfolded, in that three of its four native helices are formed, but are docked in a non-native manner. Using knowledge of the structure of the intermediate of Im7, we have used rational design to stabilise an intermediate formed during the folding of Im9 by the introduction of specific stabilising interactions at positions known to stabilise the Im7 folding intermediate through non-native interactions. We show that the redesigned Im9 sequence folds with three-state kinetics at pH 7.0 and have used phi-value analysis to demonstrate that this species resembles the misfolded intermediate populated during Im7 folding. The redesigned Im9 sequence folds 20-fold faster than the wild-type protein under conditions in which folding is two-state. The data show that intermediate formation is an important feature of folding, even for small proteins such as Im9 for which these partially folded states do not become significantly populated. In addition, they show that the introduction of stabilising interactions can lead to rapid refolding, even when the contacts introduced are non-native.

Amino Acid Sequence↗

PubMed2004

Synthesis and photochemistry of a new class of photocleavable protein cross-linking reagents.

A new series of photocleavable protein cross-linking reagents based on bis(maleimide) derivatives of diaryl disulfides have been synthesised. They have been functionalised with cysteine and transient absorption spectra for the photolysis reaction have been recorded by using the pump-probe technique with a time resolution of 100 femtoseconds. Photolysis of the disulfide bond yields the corresponding thiyl radicals in less than a picosecond. There is a significant amount of geminate recombination, but some of the radicals escape the solvent cage and the quantum yield for photocleavage is 30 % in water.

Cross-Linking Reagents↗

PubMed2004

Equilibrium hydrogen exchange reveals extensive hydrogen bonded secondary structure in the on-pathway intermediate of Im7.

The four-helical immunity protein Im7 folds through an on-pathway intermediate that has a specific, but partially misfolded, hydrophobic core. In order to gain further insight into the structure of this species, we have identified the backbone hydrogen bonds formed in the ensemble by measuring the amide exchange rates (under EX2 conditions) of the wild-type protein and a variant, I72V. In this mutant the intermediate is significantly destabilised relative to the unfolded state (deltadeltaG(ui) = 4.4 kJ/mol) but the native state is only slightly destabilised (deltadeltaG(nu) = 1.8 kJ/mol) at 10 degrees C in 2H2O, pH* 7.0 containing 0.4 M Na2SO4, consistent with the view that this residue forms significant non-native stabilising interactions in the intermediate state. Comparison of the hydrogen exchange rates of the two proteins, therefore, enables the state from which hydrogen exchange occurs to be identified. The data show that amides in helices I, II and IV in both proteins exchange slowly with a free energy similar to that associated with global unfolding, suggesting that these helices form highly protected hydrogen-bonded helical structure in the intermediate. By contrast, amides in helix III exchange rapidly in both proteins. Importantly, the rate of exchange of amides in helix III are slowed substantially in the Im7* variant, I72V, compared with the wild-type protein, whilst other amides exchange more rapidly in the mutant protein, in accord with the kinetics of folding/unfolding measured using chevron analysis. These data demonstrate, therefore, that local fluctuations do not dominate the exchange mechanism and confirm that helix III does not form stable secondary structure in the intermediate. By combining these results with previously obtained Phi-values, we show that the on-pathway folding intermediate of Im7 contains extensive, stable hydrogen-bonded structure in helices I, II and IV, and that this structure is stabilised by both native and non-native interactions involving amino acid side-chains in these helices.

Bacterial Proteins↗

PubMed2004

Energy migration in novel pH-triggered self-assembled beta-sheet ribbons.

Energy migration between tryptophan residues has been experimentally demonstrated in self-assembled peptide tapes. Each peptide contains 11 amino acids with a Trp at position 6. The peptide self-assembly is pH-sensitive and forms amphiphilic tapes, which further stack in ribbons (double tapes) and fibrils in water depending on the concentration. Fluorescence spectra, quenching, and anisotropy experiments showed that when the pH is lowered from 9 to 2, the peptide self-assembly buries the tryptophan in a hydrophobic and restricted environment in the interior of stable ribbons as expected on the basis of the peptide design. These fluorescence data support directly and for the first time the presence of such ribbons which are characterized by a highly packed and stable hydrophobic interior. In common with Trp in many proteins, fluorescence lifetimes are nonexponential, but the average lifetime is shorter at low pH, possibly due to quenching with neighboring Phe residues. Unexpectedly, time-resolved fluorescence anisotropy does not change significantly with self-assembly when in water. In highly viscous sucrose-water mixtures, the anisotropy decay at low pH was largely unchanged compared to that in water, whereas at high pH, the anisotropy decay increased significantly. We concluded that depolarization at low pH was not due to rotational diffusion but mainly due to energy migration between adjacent tryptophan residues. This was supported by a master equation kinetic model of Trp-Trp energy migration, which showed that the simulated and experimental results are in good agreement, although on average only three Trp residues were visited before emission.

Computer Simulation↗

PubMed2003

A crystallographic, EPR and theoretical study of the Jahn-Teller distortion in [CuTp2] (Tp- = tris[pyrazol-1-yl]hydridoborate).

Crystals of the title compound (1) contain two independent, centrosymmetric half-molecules per asymmetric unit. While both of these show Jahn-Teller elongated six-coordinate geometries, the lengths of the elongated Cu-N bonds in the two molecules differ by 0.117(2) A at 30 K. The structure of one of these molecules (molecule A) does not vary with temperature below 350 K. The other molecule (molecule B) shows Cu-N bond lengths that are temperature-dependent between 225 and 375 K, but do not vary further at lower temperature. This indicates a fluxional axis of Jahn-Teller elongation in this molecule at these higher temperatures. Consideration of the thermal parameters in these structures implies that the fluxionality in molecule B is frozen out near 150 K. This conclusion is supported by a Q-band powder EPR study. The d-d transition energies of molecules A and B have been calculated by several density function (DF) methods, including a time-dependent DF calculation. The crystallographic data have been reproduced using the vibronic coupling model of Burgi and Hitchman. This has shown that the different fluxionality regimes for molecules A and B are not a consequence of their different static molecular structures, but rather reflect their different local environments in the crystal.

Journal Article↗

PubMed2003

Pulling geometry defines the mechanical resistance of a beta-sheet protein.

Proteins show diverse responses when placed under mechanical stress. The molecular origins of their differing mechanical resistance are still unclear, although the orientation of secondary structural elements relative to the applied force vector is thought to have an important function. Here, by using a method of protein immobilization that allows force to be applied to the same all-beta protein, E2lip3, in two different directions, we show that the energy landscape for mechanical unfolding is markedly anisotropic. These results, in combination with molecular dynamics (MD) simulations, reveal that the unfolding pathway depends on the pulling geometry and is associated with unfolding forces that differ by an order of magnitude. Thus, the mechanical resistance of a protein is not dictated solely by amino acid sequence, topology or unfolding rate constant, but depends critically on the direction of the applied extension.

Anisotropy↗

PubMed2003

Accurate analysis of fluorescence decays from single molecules in photon counting experiments.

In time-resolved, single-photon counting experiments, the standard method of nonlinear least-squares curve fitting incorrectly estimates the fluorescence lifetimes. Even for single-exponential data, errors may be up to +/- 15%, and for more complex fits, may be even higher, although the fitted line appears to describe the data. The origin of this error is not a result of the Poisson distribution, as is often stated, but is entirely due to the weighting of the fit. An alternative weighting method involving a minor change in the fitting method eliminates this problem, enabling accurate fitting even in difficult cases, including the small data sets observed in single molecule experiments and with a precision similar to that of maximum likelihood methods.

Journal Article↗

PubMed2003

Unfolding dynamics of proteins under applied force.

Understanding the mechanisms of protein folding is a major challenge that is being addressed effectively by collaboration between researchers in the physical and life sciences. Recently, it has become possible to mechanically unfold proteins by pulling on their two termini using local force probes such as the atomic force microscope. Here, we present data from experiments in which synthetic protein polymers designed to mimic naturally occurring polyproteins have been mechanically unfolded. For many years protein folding dynamics have been studied using chemical denaturation, and we therefore firstly discuss our mechanical unfolding data in the context of such experiments and show that the two unfolding mechanisms are not the same, at least for the proteins studied here. We also report unexpected observations that indicate a history effect in the observed unfolding forces of polymeric proteins and explain this in terms of the changing number of domains remaining to unfold and the increasing compliance of the lengthening unstructured polypeptide chain produced each time a domain unfolds.

Hydrogen Bonding↗

PubMed2003

Excited state dynamics and rapid internal conversion in a stable dipole molecule.

The excited singlet state of an azomethine ylide or 'stable dipole' exhibits an ultrafast radiationless relaxation after femtosecond laser excitation. These transients are observed before the excited state decays in an almost activationless manner, the barrier is 440 cm-1, to the ground state with a 1.5 ps lifetime. Cooling of the hot ground state is also apparent in the transient absorption data and in methanol decays with a 5.7 ps lifetime. The viscosity dependence of the fluorescence yield and lifetime in different solvents is small and far less pronounced than in triphenylmethane dyes. Surprisingly, the excited state decay is not due to twisting about the C-N bond of the ylide but it is caused by buckling of one of the rings as the nitrogen atom changes character from sp2 to sp3 hybridisation.

Journal Article↗

PubMed2002

Femtosecond electron-transfer reactions in mono- and polynucleotides and in DNA.

Quenching of redox active, intercalating dyes by guanine bases in DNA can occur on a femtosecond time scale both in DNA and in nucleotide complexes. Notwithstanding the ultrafast rate coefficients, we find that a classical, nonadiabatic Marcus model for electron transfer explains the experimental observations, which allows us to estimate the electronic coupling (330 cm(-1)) and reorganization (8070 cm(-1)) energies involved for thionine-[poly(dG-dC)](2) complexes. Making the simplifying assumption that other charged, pi-stacked DNA intercalators also have approximately these same values, the electron-transfer rate coefficients as a function of the driving force, DeltaG, are derived for similar molecules. The rate of electron transfer is found to be independent of the speed of molecular reorientation. Electron transfer to the thionine singlet excited state from DNA obtained from calf thymus, salmon testes, and the bacterium, micrococcus luteus (lysodeikticus) containing different fractions of G-C pairs, has also been studied. Using a Monte Carlo model for electron transfer in DNA and allowing for reaction of the dye with the nearest 10 bases in the chain, the distance dependence scaling parameter, beta, is found to be 0.8 +/- 0.1 A(-1). The model also predicts the redox potential for guanine dimers, and we find this to be close to the value for isolated guanine bases. Additionally, we find that the pyrimidine bases are barriers to efficient electron transfer within the superexchange limit, and we also infer from this model that the electrons do not cross between strands on the picosecond time scale; that is, the electronic coupling occurs predominantly through the pi-stack and is not increased substantially by the presence of hydrogen bonding within the duplex. We conclude that long-range electron transfer in DNA is not exceptionally fast as would be expected if DNA behaved as a "molecular wire" but nor is it as slow as is seen in proteins, which do not benefit from pi-stacking.

Coloring Agents↗

PubMed2002

The effect of core destabilization on the mechanical resistance of I27.

It is still unclear whether mechanical unfolding probes the same pathways as chemical denaturation. To address this point, we have constructed a concatamer of five mutant I27 domains (denoted (I27)(5)*) and used it for mechanical unfolding studies. This protein consists of four copies of the mutant C47S, C63S I27 and a single copy of C63S I27. These mutations severely destabilize I27 (DeltaDeltaG(UN) = 8.7 and 17.9 kJ mol(-1) for C63S I27 and C47S, C63S I27, respectively). Both mutations maintain the hydrogen bond network between the A' and G strands postulated to be the major region of mechanical resistance for I27. Measuring the speed dependence of the force required to unfold (I27)(5)* in triplicate using the atomic force microscope allowed a reliable assessment of the intrinsic unfolding rate constant of the protein to be obtained (2.0 x 10(-3) s(-1)). The rate constant of unfolding measured by chemical denaturation is over fivefold faster (1.1 x 10(-2) s(-1)), suggesting that these techniques probe different unfolding pathways. Also, by comparing the parameters obtained from the mechanical unfolding of a wild-type I27 concatamer with that of (I27)(5)*, we show that although the observed forces are considerably lower, core destabilization has little effect on determining the mechanical sensitivity of this domain.

Amino Acid Sequence↗

PubMed2002

Mechanically unfolding proteins: the effect of unfolding history and the supramolecular scaffold.

The mechanical resistance of a folded domain in a polyprotein of five mutant I27 domains (C47S, C63S I27)(5)is shown to depend on the unfolding history of the protein. This observation can be understood on the basis of competition between two effects, that of the changing number of domains attempting to unfold, and the progressive increase in the compliance of the polyprotein as domains unfold. We present Monte Carlo simulations that show the effect and experimental data that verify these observations. The results are confirmed using an analytical model based on transition state theory. The model and simulations also predict that the mechanical resistance of a domain depends on the stiffness of the surrounding scaffold that holds the domain in vivo, and on the length of the unfolded domain. Together, these additional factors that influence the mechanical resistance of proteins have important consequences for our understanding of natural proteins that have evolved to withstand force.

Computer Simulation↗