PubMed Health⌕ Search

Biomedical subjects

Gottfried Lemperle

Publications and source records attributed to Gottfried Lemperle.

10 recordsLinked to original sources

ArteFill: a third-generation permanent dermal filler and tissue stimulator.

The technical and physiologic shortcomings associated with prior generations of polymethylmethacrylate (PMMA) dermal fillers have been reduced significantly since their original market introduction in 1989. For example, the PMMA microspheres in the third-generation product ArteFill meet the new limit set by the FDA of less than 1 particle below 20 micrometers per 100 microspheres (< 1% by the number). Therefore, it is expected that the already low granuloma rate following injections with second-generation product Artecoll (1:5000) will be reduced further with injections of ArteFill. In the authors' experience, both Artecoll and ArteFill have proven to be safe, predictable, and effective dermal fillers. It is anticipated that Artefill will receive FDA approval in late 2006 and will be marketed internationally.

Biocompatible Materials↗

Avoiding and treating dermal filler complications.

All fillers are associated with the risk of both early and late complications. Early side effects such as swelling, redness, and bruising occur after intradermal or subdermal injections. The patient has to be aware of and accept these risks. Adverse events that last longer than 2 weeks can be attributable to technical shortcomings (e.g., too superficial an implantation of a long-lasting filler substance). Such adverse events can be treated with intradermal 5-fluorouracil, steroid injections, vascular lasers, or intense pulsed light, and later with dermabrasion or shaving. Late adverse events also include immunologic phenomena such as late-onset allergy and nonallergic foreign body granuloma. Both react well to intralesional steroid injections, which often have to be repeated to establish the right dose. Surgical excisions shall remain the last option and are indicated for hard lumps in the lips and visible hard nodules or hard granuloma in the subcutaneous fat.

Adipose Tissue↗

Migration studies and histology of injectable microspheres of different sizes in mice.

Injectable dermal filler materials consist of either fluids, biological fragments, or suspensions of particles or microspheres. Particles and microspheres are said to "migrate," but migration can occur only when they are injected into blood vessels. To evaluate biocompatibility and transport, five nonresorbable polymethylmethacrylate microspheres of various sizes, suspended in different carriers, as well as resorbable polylactic acid and dextran microspheres were injected subcutaneously into mice. The five implantation sites were the right cheek, right axilla, right groin, urethra, and the right quadriceps muscle of the thigh. These sites were excised along with the local lymph nodes, lungs, liver, and spleen at 1, 3, 6, and 9 months after injection. Polymethylmethacrylate microspheres of 4 microm and 8 microm were phagocytosed but not transported to lymph nodes or distant organs. Larger microspheres of 20, 40, and 100 microm were encapsulated by connective tissue, macrophages, and giant cells. Polylactic acid microspheres caused a mild inflammatory response and had disappeared at 6 months. Dextran microspheres caused a pronounced foreign-body reaction and were phagocytosed at 9 months. The extremely large carbon-coated spheres of 200 to 500 microm in diameter "migrated" up to 1 cm from the implantation site. With the exception of an erroneous intravenous injection, no migration or transportation of any of the injected microspheres to lymph nodes or filter organs was seen. Obviously, the collagen glue released no microspheres. After subdermal injection, the collagen carrier substance kept the microspheres apart as a scaffold for tissue ingrowth, whereas all other carrier substances, such as gelatin, hyaluronic acid, or alginate, separated soon after injection, thereby causing agglomeration of the microspheres.

Animals↗

Human histology and persistence of various injectable filler substances for soft tissue augmentation.

An increasing number of soft tissue filler substances have been introduced to the beauty market outside the U.S. which lack experimental and clinical data in support of their claim. Ten commercially available filler substances were examined for biocompatibility and durability: 0.1 cc of each substance was injected deep intradermally into the volar forearm of one of the authors and observed for clinical reaction and permanence. At 1, 3, 6, and 9 months the test sites were excised, histologically examined, and graded according to foreign body reactions classification. Collagen (Zyplast) was phagocytosed at 6 months and hyaluronic acid (Restylane) at 9 months. PMMA microspheres (Artecoll) had encapsulated with connective tissue, macrophages, and sporadic giant cells. Silicone oil (PMS 350) was clinically inconspicuous but dissipated into the tissue, causing a chronic foreign body reaction. Polylactic acid microspheres (New-Fill) induced a mild inflammatory response and had disappeared clinically at 4 months. Dextran microspheres (Reviderm intra) induced a pronounced foreign body reaction and had disappeared at 6 months. Polymethylacrylate particles (Dermalive) induced the lowest cellular reaction but had disappeared clinically at 6 months. Polyacrylamide (Aquamid) was well tolerated and remained palpable to a lessening degree over the entire testing period. Histologically, it dissipated more slowly and was kept in place through fine fibrous capsules. Polyvinylhydroxide microspheres suspended in acrylamide (Evolution) were well tolerated, slowly diminishing over 9 months. Calcium hydroxylapatite microspheres (Radiance FN) induced almost no foreign body reaction but were absorbed by the skin at 12 months. Host defense mechanisms react differently to the various filler materials, but all substances-resorbable or nonresorbable-appeared to be clinically and histologically safe, although all exhibit undesirable side effects. Since the mechanism of late inflammation or granuloma formation is still unknown, early histological findings are not useful in predicting possible late reactions to filler substances.

Acrylic Resins↗

Soft tissue augmentation with artecoll: 10-year history, indications, techniques, and complications.

Most of the biologic filler materials that increase the thickness of the corium in a wrinkle line are phagocytosed within a certain time. Therefore, a lasting effect can only be achieved with nonresorbable synthetic substances. Artefill consists of 20 volume percent microspheres of polymethyl-methacrylate and 80 volume percent of bovine collagen. Beneath the crease, the microspheres with their exceptional surface smoothness stimulate fibroblasts to encapsulate each individual one of the 6-million microspheres contained in 1 mL of Artefill. Collagen is merely a carrier substance that prevents the microspheres from agglomerating during tissue ingrowth. The 20 volume percent of microspheres in Artefill provides the scaffold for the 80% volume of connective tissue deposition, a complete replacement of the injected collagen. The filler material beneath a crease acts like a splint and prevents the possibility of its further folding, thereby allowing the diminished thickness of the corium in a crease to recover. This recovery process is well known even in older patients with facial paralysis or after a stroke, whose facial wrinkles and furrows on the paralyzed side disappear over time.

Biocompatible Materials↗

Nail regeneration by elongation of the partially destroyed nail bed.

Patients with partially destroyed fingernails tend to hide them, and such patients often do not find help because fingernails are considered of little functional value. To improve the aesthetic appearance of such nails, a simple excision of the destroyed nail matrix can stimulate the growth of the residual healthy matrix and regenerate the nail. Prerequisite is a healthy nail residue of at least the lunula. An excision of an en bloc, crescent-shaped, full-thickness scar, 5 mm at its greatest width and extending from one lateral nail fold to the other, increases the length of the nail plate. Together with the matrix, the nail will grow about 4 mm distally. A second crescent-shaped excision 1 to 2 months later will further lengthen the nail until it has gained full length. Normal nail growth was achieved in 11 patients who had partially scarred nail beds after mycosis or trauma.

Humans↗

Phagocytosis of different particulate dermal filler substances by human macrophages and skin cells.

BACKGROUND: Foreign substances have been introduced into the human body with varying degrees of success. Polymethylmethacrylate (PMMA) microspheres of different sizes recently have been manufactured for use as a filler substances in the skin and other organs. OBJECTIVE: To establish whether the size of PMMA microspheres determines whether various cell types initiate phagocytosis. METHODS: The capacity of three different cell lines-U-937 cells, XS 106 and XS 52 Langerhans cells, and HaCaT keratinocytes-to phagocytose microspheres of varying sizes was examined using light and confocal microscopy as well as fluorescence-activated cell sorter (FACS) analysis. Tumor necrosis factor (TNF)-alpha secretion was also determined. RESULTS: The U-937 cells, keratinocytes, and Langerhans cells could phagocytose PMMA particles of 20 microm or smaller. Microspheres larger than 20 microm were not ingested by any of the cells. CONCLUSION: Microspheres larger than 20 microm have a lower likelihood of being phagocytosed. Thus this study suggests that microspheres 40-50 microm in diameter are less likely to initiate an inflammatory reaction when injected into the dermis and subdermis as a filler substance. On the other hand, microparticles made of silicone and polymethacrylate were phagocytosed, possibly because of their different structure.

Biocompatible Materials↗

International Task Force on Volunteer Cleft Missions.

The International Task Force on Volunteer Cleft Missions was set up to provide a report to be presented at the Eighth International Congress of Cleft Palate and Associated Craniofacial Anomalies on September 12, 1997, in Singapore. The aim of the report was to provide data from a wide range of different international teams performing volunteer cleft missions and, thereafter, based on the collected data, to identify common goals and aims of such missions. Thirteen different groups actively participating in volunteer cleft missions worldwide were selected from the International Confederation of Plastic and Reconstructive Surgery's list of teams actively participating in volunteer cleft missions. Because of the time frame within which the committee had to work, three groups that did not respond by the stipulated deadline were omitted from the committee. The represented members and their respective institutions have undertaken more than 50 volunteer cleft missions to underdeveloped nations worldwide within the last 3 years. They have visited over 20 different countries, treating more than 3,500 patients worldwide. Based on the data collected and by consensus, the committee outlined recommendations for future volunteer cleft missions based on 1) mission objectives, 2) organization, 3) personal health and liability, 4) funding, 5) trainees in volunteer cleft missions, and 6) public relations. The task force believed that all volunteer cleft missions should have well-defined objectives, preferably with long-term plans. The task force also decided that it was impossible to achieve a successful mission without good organization and close coordination. All efforts should be made, and care taken, to ensure that there is minimal morbidity and no mortality. Finally, as ambassadors of goodwill and humanitarian aid, the participants must make every effort to understand and respect local customs and protocol. The main aims are to provide top-quality surgical service, train local doctors and staff, develop and nurture fledgling cleft programs, and, finally, make new friends.

Cleft Palate↗