PubMed Health⌕ Search

Biomedical subjects

Gregor Guncar

Publications and source records attributed to Gregor Guncar.

9 recordsLinked to original sources
PubMed2006

Essential role of proline isomerization in stefin B tetramer formation.

Here we present the tetrameric structure of stefin B, which is the result of a process by which two domain-swapped dimers of stefin B are transformed into tetramers. The transformation involves a previously unidentified process of extensive intermolecular contacts, termed hand shaking, which occurs concurrently with trans to cis isomerization of proline 74. This proline residue is widely conserved throughout the cystatin superfamily, a member of which, human cystatin C, is the key protein in cerebral amyloid angiopathy. These results are consistent with the hypothesis that isomerization of proline residues can play a decisive role in amyloidogenesis.

Amino Acid Sequence↗
PubMed2006

Focusing in on structural genomics: the University of Queensland structural biology pipeline.

The flood of new genomic sequence information together with technological innovations in protein structure determination have led to worldwide structural genomics (SG) initiatives. The goals of SG initiatives are to accelerate the process of protein structure determination, to fill in protein fold space and to provide information about the function of uncharacterized proteins. In the long-term, these outcomes are likely to impact on medical biotechnology and drug discovery, leading to a better understanding of disease as well as the development of new therapeutics. Here we describe the high throughput pipeline established at the University of Queensland in Australia. In this focused pipeline, the targets for structure determination are proteins that are expressed in mouse macrophage cells and that are inferred to have a role in innate immunity. The aim is to characterize the molecular structure and the biochemical and cellular function of these targets by using a parallel processing pipeline. The pipeline is designed to work with tens to hundreds of target gene products and comprises target selection, cloning, expression, purification, crystallization and structure determination. The structures from this pipeline will provide insights into the function of previously uncharacterized macrophage proteins and could lead to the validation of new drug targets for chronic obstructive pulmonary disease and arthritis.

Animals↗
PubMed2006

Folding and amyloid-fibril formation for a series of human stefins' chimeras: any correlation?

To study the influence of whole secondary structure elements to the process of folding and amyloid-fibril formation, chimeras of stefins have been prepared. GdnHCl denaturation curves and folding rates (chevron plots) have been analyzed based on a two-state mechanism. The order of stability is: stefin A > aAbbbb > bAbbbb > stefin B = aBaaaa > bBaaaa, where the make up of chimeric proteins is designated by small letters representing the source of individual strands (a for stefin A, b for stefin B) and a capital letter representing the source of the helix (A for stefin A and B for stefin B). Only the fast folding reactions were included in the analysis and it has been found that stefin B folds the fastest (657 s(-1)). Similarly, fast folders are the chimeric proteins aBaaaa and bBaaaa, both of which contain the alpha-helix of stefin B. Unfolding rates correlate very well with protein stability, with the slowest rate for the most stable protein, stefin A. Amyloid-fibril growth was measured for each protein by monitoring thioflavin T fluorescence and was visualized using electron microscopy. The propensity to form amyloid-fibrils is in the order: stefin B > bAbbbb > aAbbbb > bBaaaa > aBaaaa > stefin A. This order does not correlate with stability, or with the folding or unfolding rates. Instead, the propensity to fibrillize is related to selected parts of structure, such as the beta-sheet of stefin B, and can be predicted reasonably well by calculating the beta-strand propensity of the denatured states.

Amyloid↗
PubMed2004

Pore formation by equinatoxin, a eukaryotic pore-forming toxin, requires a flexible N-terminal region and a stable beta-sandwich.

Actinoporins are eukaryotic pore-forming proteins that create 2-nm pores in natural and model lipid membranes by the self-association of four monomers. The regions that undergo conformational change and form part of the transmembrane pore are currently being defined. It was shown recently that the N-terminal region (residues 10-28) of equinatoxin, an actinoporin from Actinia equina, participates in building of the final pore wall. Assuming that the pore is formed solely by a polypeptide chain, other parts of the toxin should constitute the conductive channel and here we searched for these regions by disulfide scanning mutagenesis. Only double cysteine mutants where the N-terminal segment 1-30 was attached to the beta-sandwich exhibited reduced hemolytic activity upon disulfide formation, showing that other parts of equinatoxin, particularly the beta-sandwich and importantly the C-terminal alpha-helix, do not undergo large conformational rearrangements during the pore formation. The role of the beta-sandwich stability was independently assessed via destabilization of a part of its hydrophobic core by mutations of the buried Trp117. These mutants were considerably less stable than the wild-type but exhibited similar or slightly lower permeabilizing activity. Collectively these results show that a flexible N-terminal region and stable beta-sandwich are pre-requisite for proper pore formation by the actinoporin family.

Animals↗
PubMed2004

Different propensity to form amyloid fibrils by two homologous proteins-Human stefins A and B: searching for an explanation.

By using ThT fluorescence, X-ray diffraction, and atomic force microscopy (AFM), it has been shown that human stefins A and B (subfamily A of cystatins) form amyloid fibrils. Both protein fibrils show the 4.7 A and 10 A reflections characteristic for cross beta-structure. Similar height of approximately 3 nm and longitudinal repeat of 25-27 nm were observed by AFM for both protein fibrils. Fibrils with a double height of 5.6 nm were only observed with stefin A. The fibril's width for stefin A fibrils, as observed by transmission electron microscopy (TEM), was in the same range as previously reported for stefin B (Zerovnik et al., Biochem Biophys Acta 2002;1594:1-5). The conditions needed to undergo fibrillation differ, though. The amyloid fibrils start to form at pH 5 for stefin B, whereas in stefin A, preheated sample has to be acidified to pH < 2.5. In both cases, adding TFE, seeding, and alignment in a strong magnetic field accelerate the fibril growth. Visual analysis of the three-dimensional structures of monomers and domain-swapped dimers suggests that major differences in stability of both homologues stem from arrangement of specific salt bridges, which fix alpha-helix (and the alpha-loop) to beta-sheet in stefin A monomeric and dimeric forms.

Amyloid↗
PubMed2004

Molecular basis of Colorado potato beetle adaptation to potato plant defence at the level of digestive cysteine proteinases.

Potato synthesises high levels of proteinase inhibitors in response to insect attack. This can adversely affect protein digestion in the insects, leading to reduced growth, delayed development and lowered fecundity. Colorado potato beetle overcomes this defence mechanism by changing the composition of its digestive proteinases. The induced cysteine proteinases in the adapted gut sustain a normal rate of protein hydrolysis either by inactivating the inhibitors by cleavage or by insensitivity to the inhibitors as a result of high Kis. In this study cDNA clones of cysteine proteinases in adapted guts were isolated by nested PCR on the basis of N-terminal sequences previously determined for purified enzymes (Gruden et al., 2003). The cysteine proteinase cDNAs can be classified into three groups: intestains A, B and C. The amino acid identity is more than 91% within and 35-62% between the groups. They share 43-50% identity to mammalian cathepsins S, L, K, H, J and cathepsin-like enzymes from different arthropods. Homology modelling predicts that intestains A, B and C follow the general fold of papain-like proteinases. Intestains from each group, however, differ in some specific structural characteristics in the S1 and S2 binding sites that could influence enzyme-inhibitor interaction and thus, provide different mechanisms of resistance to inhibitors for the different enzymes. Gene expression analysis revealed that the intestains A and C, but not B, are induced twofold by potato plants with high levels of proteinase inhibitors.

Acetates↗
PubMed2003

Crystal structure of Stefin A in complex with cathepsin H: N-terminal residues of inhibitors can adapt to the active sites of endo- and exopeptidases.

Binding of cystatin-type inhibitors to papain-like exopeptidases cannot be explained by the stefin B-papain complex. The crystal structure of human stefin A bound to an aminopeptidase, porcine cathepsin H, has been determined in monoclinic and orthorhombic crystal forms at 2.8A and 2.4A resolutions, respectively. The asymmetric unit of each form contains four complexes. The structures are similar to the stefin B-papain complex, but with a few distinct differences. On binding, the N-terminal residues of stefin A adopt the form of a hook, which pushes away cathepsin H mini-chain residues and distorts the structure of the short four residue insertion (Lys155A-Asp155D) unique to cathepsin H. Comparison with the structure of isolated cathepsin H shows that the rims of the cathepsin H structure are slightly displaced (up to 1A) from their position in the free enzyme. Furthermore, comparison with the stefin B-papain complex showed that molecules of stefin A bind about 0.8A deeper into the active site cleft of cathepsin H than stefin B into papain. The approach of stefin A to cathepsin H induces structural changes along the interaction surface of both molecules, whereas no such changes were observed in the stefin B-papain complex. Carboxymethylation of papain seems to have prevented the formation of the genuine binding geometry between a papain-like enzyme and a cystatin-type inhibitor as we observe it in the structure presented here.

Animals↗
PubMed2003

Lysosomal cysteine proteases (cathepsins): promising drug targets.

Papain-like lysosomal cysteine proteases are processive and digestive enzymes expressed in organisms from bacteria to humans. Their ubiquity alone makes them potential drug targets, with the assumption that appropriate specificities may be achieved. These enzymes have rather short active-site clefts, comprising three well defined substrate-binding subsites (S2, S1 and S1') and additionally have comparatively broad binding areas (S4, S3, S2', S3'). This geometry distinguishes them from other protease classes, such as serine and aspartic proteases, with six and eight substrate-binding sites, respectively. Exopeptidases (cathepsins B, C, H and X), in contrast to endopeptidases (such as cathepsins L, S, V and F), possess structural features that facilitate binding of N- and C-terminal groups of substrates in the active-site cleft. Other than a clear preference for free chain termini in the case of exopeptidases, the substrate-binding sites exhibit no strict specificities. Instead, their subsite preferences arise more from specific exclusions of substrate type. This presents a challenge for the design of inhibitors to target a specific cathepsin: only the cumulative effect of an assembly of inhibitor fragments can produce the desired result. The small number of papain-like lysosomal cysteine proteases (11 human enzymes are known) and the small number of substrate-binding sites calls for a innovative and empirical approach.

Amino Acid Sequence↗