Biomedical subjects

Gregory F Payne

Publications and source records attributed to Gregory F Payne.

At least 19 recordsLinked to original sources

PubMed2007

Reversible vesicle restraint in response to spatiotemporally controlled electrical signals: a bridge between electrical and chemical signaling modes.

Microelectronic devices employ electrons for signaling whereas the nervous system signals using ions and chemicals. Bridging these signaling differences would benefit applications that range from biosensing to neuroprosthetics. Here, we report the use of localized electrical signals to perform an operation common to chemical signaling in the nervous system. Specifically, we employ electrical signals to restrain vesicles reversibly. We perform this operation using the stimuli-responsive aminopolysaccharide chitosan that is able to electrodeposit onto cathode surfaces in response to localized electrical stimuli. We show that surfactant-vesicles and liposomes can be co-deposited with chitosan and are entrapped (i.e., restrained) within the deposited film's matrix. Vesicle co-deposition could be controlled spatially and temporally using microfabricated wafers with independent electrode addresses. Finally, we show that vesicles restrained within the deposited chitosan matrix can be mobilized under mildly acidic conditions (pH <6.5) that resolubilize chitosan. Potentially, the ability to restrain and mobilize chemical signals that are segregated within vesicles may allow microfluidic systems to access the rich diversity offered by chemical signaling.

Animals↗

PubMed2006

Mechano-transduction of DNA hybridization and dopamine oxidation through electrodeposited chitosan network.

While microcantilevers offer exciting opportunities for mechano-detection, they often suffer from limitations in either sensitivity or selectivity. To address these limitations, we electrodeposited a chitosan film onto a cantilever surface and mechano-transduced detection events through the chitosan network. Our first demonstration was the detection of nucleic acid hybridization. In this instance, we electrodeposited the chitosan film onto the cantilever, biofunctionalized the film with oligonucleotide probe, and detected target DNA hybridization by cantilever bending in solution (static mode) or resonant frequency shifts in air (dynamic mode). In both detection modes, we observed a two-order of magnitude increase in sensitivity compared to values reported in literature for DNA immobilized on self-assembled monolayers. In our second demonstration, we coupled electrochemical and mechanical modes to selectively detect the neurotransmitter dopamine. A chitosan-coated cantilever was biased to electrochemically oxidize dopamine solution. Dopamine's oxidation products react with the chitosan film and create a tensile stress of approximately 1.7 MPa, causing substantial cantilever bending. A control experiment was performed with ascorbic acid solution. It was shown that the electrochemical oxidation of ascorbic acid does not lead to reactions with chitosan and does not change cantilever bending. These results suggest that chitosan can confer increased sensitivity and selectivity to microcantilever sensors.

Biosensing Techniques↗

PubMed2006

Chitosan-mediated in situ biomolecule assembly in completely packaged microfluidic devices.

We report facile in situ biomolecule assembly at readily addressable sites in microfluidic channels after complete fabrication and packaging of the microfluidic device. Aminopolysaccharide chitosan's pH responsive and chemically reactive properties allow electric signal-guided biomolecule assembly onto conductive inorganic surfaces from the aqueous environment, preserving the activity of the biomolecules. A transparent and nonpermanently packaged device allows consistently leak-free sealing, simple in situ and ex situ examination of the assembly procedures, fluidic input/outputs for transport of aqueous solutions, and electrical ports to guide the assembly onto the patterned gold electrode sites within the channel. Both in situ fluorescence and ex situ profilometer results confirm chitosan-mediated in situ biomolecule assembly, demonstrating a simple approach to direct the assembly of biological components into a completely fabricated device. We believe that this strategy holds significant potential as a simple and generic biomolecule assembly approach for future applications in complex biomolecular or biosensing analyses as well as in sophisticated microfluidic networks as anticipated for future lab-on-a-chip devices.

Biosensing Techniques↗

PubMed2006

Tyrosine-based "activatable pro-tag": enzyme-catalyzed protein capture and release.

Protein recovery is often achieved by a series of capture and release steps that often involve chromatographic binding and elution. We report an alternative, non-chromatographic, capture and release approach that employs enzymes and the stimuli-responsive polysaccharide chitosan. We capture our protein using the enzyme tyrosinase that oxidizes accessible tyrosine residues of the protein and "activates" these residues for covalent capture (i.e., conjugation) onto chitosan. Using fusions of green fluorescent protein (GFP) we observed that: (i) enzymatic activation is required for protein capture to chitosan; and (ii) capture is enhanced (approximately five-fold) by engineering the protein to have a penta-tyrosine fusion tag that provides additional accessible tyrosine residues for enzymatic activation. Because the fusion tag appears to be the primary site for capture, and capture requires activation, we designate penta-tyrosine as a "pro-tag." The captured GFP-chitosan conjugate possesses the pH-responsive solubility that is characteristic of chitosan. We exploit this pH-responsive solubility to facilitate purification of the captured protein. Two enzymatic methods were explored to release the captured GFP from the chitosan conjugate. The first method employs enterokinase (EK) to cleave the protein at an engineered EK-cleavage site. The second method employs chitosanase to hydrolyze the chitosan backbone. Using GFP as a model protein, we demonstrated that enzymatic capture and release provides a simple, non-chromatographic means to recover proteins directly from cell lysates.

Biotechnology↗

PubMed2006

Bioinspired vesicle restraint and mobilization using a biopolymer scaffold.

Biology employs vesicles to package molecules (e.g., neurotransmitters) for their targeted delivery in response to specific spatiotemporal stimuli. Biology is also capable of employing localized stimuli to exert an additional control on vesicle trafficking; intact vesicles can be restrained (or mobilized) by association with (or release from) a cytoskeletal scaffold. We mimic these capabilities by tethering vesicles to a biopolymer scaffold that can undergo (i) stimuli-responsive network formation (for vesicle restraint) and (ii) enzyme-catalyzed network cleavage (for vesicle mobilization). Specifically, we use the aminopolysaccharide chitosan as our scaffold and graft a small number of hydrophobic moieties onto its backbone. These grafted hydrophobes can insert into the bilayer to tether vesicles to the scaffold. Under acidic conditions, the vesicles are not restrained by the hydrophobically modified chitosan (hm-chitosan) because this scaffold is soluble. Increasing the pH to neutral or basic conditions allows chitosan to form interpolymer associations that yield a strong, insoluble restraining network. Enzymatic hydrolysis of this scaffold by chitosanase cleaves the network and mobilizes intact vesicles. Potentially, this approach will provide a controllable means to store and liberate vesicle-based reagents/therapeutics for microfluidic/medical applications.

Chitosan↗

PubMed2006

Transition from unilamellar to bilamellar vesicles induced by an amphiphilic biopolymer.

We report some unusual structural transitions upon the addition of an amphiphilic biopolymer to unilamellar surfactant vesicles. The polymer is a hydrophobically modified chitosan and it embeds its hydrophobes in vesicle bilayers. We study vesicle-polymer mixtures using small-angle neutron scattering (SANS) and cryotransmission electron microscopy (cryo-TEM). When low amounts of the polymer are added to unilamellar vesicles of ca. 120 nm diameter, the vesicle size decreases by about 50%. Upon further addition of polymer, lamellar peaks are observed in the SANS spectra at high scattering vectors. We show that these spectra correspond to a co-existence of unilamellar and bilamellar vesicles. The transition to bilamellar vesicles as well as the changes in unilamellar vesicle size are further confirmed by cryo-TEM. A mechanism for the polymer-induced transitions in vesicle morphology is proposed.

Chitosan↗

PubMed2006

Gelatin-based biomimetic tissue adhesive. Potential for retinal reattachment.

An adhesive that cures under moist/wet conditions could facilitate surgical procedures for retinal reattachment. We are investigating an adhesive that mimics the factor XIIIa-mediated crosslinking of fibrin that occurs in the late stages of the blood coagulation cascade. Specifically, we use gelatin as the structural protein (in place of fibrin), and crosslink gelatin using a calcium-independent microbial transglutaminase (in place of the calcium-dependent transglutaminase factor XIIIa). Injection of gelatin and microbial transglutaminase (mTG) into the vitreous cavity of Sprague Dawley white rats did not elicit structural or cellular damage to the retina as evidenced from histological evaluation 2 weeks post-injection. Qualitative in vitro studies indicate that the gelatin-mTG adhesive binds to bovine retinal tissue under wet conditions. Quantitative lap-shear tests were performed with more robust bovine tissue from the choroid and sclera. The lap-shear strength of the biomimetic gelatin-mTG adhesive was independent of tissue-type and ranged from 15 to 45 kPa, which is comparable to the values reported for other soft-tissue adhesives. These studies suggest that the mTG-crosslinked gelatin may provide a simple, safe, and effective adhesive for ophthalmic applications.

Adhesiveness↗

PubMed2005

A fabrication platform for electrically mediated optically active biofunctionalized sites in BioMEMS.

We report a new approach for microfluidic optical bioanalysis that is based on the electrically driven assembly of bio-components on a transparent sidewall and the optical detection of the assembled components using planar waveguides. This allows localized electrical signals for bio-assembly and optical signals for bio-detection that can easily be applied in MEMS systems. We demonstrate a BioMEMS design incorporating this scheme and its output signal when using fluorescent detection.

Biomimetics↗

PubMed2005

Chitosan-mediated and spatially selective electrodeposition of nanoscale particles.

Nanoscale particles offer a variety of interesting properties, and there is growing interest in their assembly into higher ordered structures. We report that the pH-responsive aminopolysaccharide chitosan can mediate the electrodeposition of model nanoparticles. Chitosan is known to electrodeposit at the cathode surface in response to a high localized pH. To demonstrate that chitosan can mediate nanoparticle deposition, we suspended fluorescently labeled latex nanoparticles (100 nm diameter spheres) in a chitosan solution (1%) and performed electrodeposition (0.05 mA/cm2 for several minutes). Results demonstrate that chitosan is required for nanoparticle electrodeposition; chitosan confers spatial selectivity to electrodeposition; and nanoparticles distribute throughout the electrodeposited chitosan film. Additionally, we observed that the deposited films reversibly swell upon rehydration. This work indicates that chitosan provides a simple means to assemble nanoparticles at addressable locations and provides further evidence that stimuli-responsive biological materials may facilitate fabrication at the microscale.

Biocompatible Materials↗

PubMed2005

Signal-directed sequential assembly of biomolecules on patterned surfaces.

The signal-guided and sequential assembly of biomolecules onto patterned surfaces is demonstrated. Readily transmittable electric signals are used to guide spatially selective deposition of the pH-responsive polysaccharide, chitosan, and functionalized chitosan conjugates, by generating localized pH gradients. The nucleophilic primary amine groups of chitosan enable facile conjugation of proteins and nucleic acids by two approaches, one an enzymatic approach and the other a standard chemical modification, thus providing flexibility when sequentially assembling biomolecules in a spatially selective manner. Moreover, we developed an agarose gel "biomask" for the sequential assembly of single-stranded DNA and confirmed its functionality through nucleic acid hybridization assays.

Base Sequence↗

PubMed2005

Vesicle--biopolymer gels: networks of surfactant vesicles connected by associating biopolymers.

The effect of adding an associating biopolymer to surfactant vesicles and micelles is studied using rheology and small-angle neutron scattering (SANS). The associating polymer is obtained by randomly tethering hydrophobic alkyl chains to the backbone of the polysaccharide, chitosan. Adding this polymer to surfactant vesicles results in a gel; that is, the sample transforms from a Newtonian liquid to an elastic solid having frequency-independent dynamic shear moduli. SANS shows that the vesicles remain intact within the gel. The results suggest a gel structure in which the vesicles are connected by polymer chains into a three-dimensional network. Vesicle-polymer binding is expected to occur via the insertion of polymer hydrophobes into the vesicle bilayer. Each vesicle thus acts as a multifunctional junction in the network structure. Significantly, gel formation does not occur with the native chitosan that has no hydrophobes. Moreover, adding the hydrophobically modified chitosan to a viscous sample containing wormlike micelles increases the viscosity further but does not give rise to a gel-like response. Thus, the formation of a robust gel network requires both the presence of hydrophobes on the polymer and vesicles in solution.

Journal Article↗

PubMed2005

Patterned assembly of genetically modified viral nanotemplates via nucleic acid hybridization.

The patterning of nanoparticles represents a significant obstacle in the assembly of nanoscale materials and devices. In this report, cysteine residues were genetically engineered onto the virion surface of tobacco mosaic virus (TMV), providing attachment sites for fluorescent markers. To pattern these viruses, labeled virions were partially disassembled to expose 5' end RNA sequences and hybridized to virus-specific probe DNA linked to electrodeposited chitosan. Electron microscopy and RNAase treatments confirmed the patterned assembly of the virus templates onto the chitosan surface. These findings demonstrate that TMV nanotemplates can be dimensionally assembled via nucleic acid hybridization.

Amino Acid Substitution↗

PubMed2004

Enzymatic grafting of peptides from casein hydrolysate to chitosan. Potential for value-added byproducts from food-processing wastes.

Tyrosinase was used to initiate the grafting of peptides onto the amine-containing polysaccharide chitosan. Chemical evidence for covalent grafting was obtained from electrospray mass spectrometry for products formed from reactions with glucosamine (the monomeric unit of chitosan) and the model dipeptide Tyr-Ala. When this model dipeptide was incubated with tyrosinase and chitosan, there was a marked increase in the viscosity of the solution. This viscosity increase provides physical evidence that tyrosinase can initiate peptide grafting onto the chitosan backbone. A peptide-modified chitosan derivative was generated by reacting chitosan (0.32 w/v%) with acid-hydrolyzed casein (0.5 w/v %) using tyrosinase. After reaction, the peptide-modified chitosan was partially purified and dissolved in an aqueous acetic acid solution. Low concentrations of this peptide-modified chitosan were observed to confer viscoelastic properties to the solutions. Specifically they conferred high viscosities and shear thinning properties to the solutions, and solutions containing only 1 w/w % of the peptide-modified chitosan behaved as weak gels. Thus, tyrosinase provides a simple and safe way to convert food-processing byproducts into environmentally friendly products that offer useful functional properties. The selectivity of tyrosinase and the relatively high reactivity of chitosan's amines allow grafting to be performed with uncharacterized peptide mixtures present in crude hydrolysates.

Caseins↗

PubMed2004

Thermo-biolithography: a technique for patterning nucleic acids and proteins.

We describe a "biolithographic" technique in which the unique properties of biopolymeric materials and the selective catalytic activities of enzymes are exploited for patterning surfaces under simple and bio-friendly conditions. We begin by coating a reactive film of the polysaccharide chitosan onto an inorganic surface (glass or silicon wafer). Chitosan's pH-responsive solubility facilitates film deposition, while the nucleophilic properties of this polysaccharide allow simple chemistries or biochemistries to be used to covalently attach species to the film. The thermally responsive protein gelatin is then cast on top of the chitosan film, and the gelatin gel serves as a sacrificial "thermoresist". Pattern transfer is accomplished by applying a heated stamp to melt specific regions of the gelatin thermoresist and selectively expose the underlying chitosan. Finally, molecules are conjugated to the exposed chitosan sublayer and the sacrificial gelatin layer is removed (either by treating with warm water or protease). To demonstrate the concept, we patterned a reactive dye (NHS-fluorescein), a model 20-base oligonucleotide (using standard glutaraldehyde coupling chemistries), and a model green fluorescent protein (using tyrosinase-initiated conjugation). Because gelatin can be applied and removed under mild conditions, sequential thermo-biolithographic steps can be performed without destroying previously patterned biomacromolecules. These studies represent the first step toward exploiting nature's exquisite specificity for lithographic patterning.

Biosensing Techniques↗

PubMed2004

A robust technique for assembly of nucleic acid hybridization chips based on electrochemically templated chitosan.

A nucleic acid hybridization assay was assembled onto a robust and readily addressable silicon-based chip using polysaccharide chitosan as a scaffold for the covalent coupling of probe DNA to the chip's surface. Chitosan is a unique polymer, ideally suited for this application because its net charge and solubility are pH dependent. Specifically in this work, gold-patterned electrodes were created using standard photolithographic techniques, chitosan was electrodeposited in a spatially resolved manner onto the polarized electrodes, probe DNA was covalently assembled onto the chitosan, and both DNA:DNA and DNA:mRNA hybridization detection schemes were evaluated. Hybridization of target nucleic acid was quantifiable, reproducible, and robust; the surface was regenerated and rehybridized up to eight times without loss of signal. Finally, transcriptional upregulation of the Escherichia coli chaperone, DnaK, which is an indicator of cellular stress, was observed using the hybridization chip sandwich assay. Thus, this method enables rapid and facile monitoring of gene expression in a format that is reusable and requires minimal reagent quantities.

Chitin↗

PubMed2004

Biofabrication: using biological materials and biocatalysts to construct nanostructured assemblies.

Emerging opportunities are placing greater demands on device fabrication: next-generation microelectronics will need minimum features of less than 100 nm, high-throughput drug screening will require facile methods to incorporate sensitive biological components into microelectromechanical systems (MEMS), and implantable devices will need to be built from biocompatible materials. Increasingly, these emerging demands are being addressed by combining traditional microfabrication methods with 'biofabrication': namely, the use of biologically derived materials and biocatalysts. Recent fabrication techniques are using biological construction materials as process aids or structural components, and enzymes are being considered for their potential to fabricate devices with high selectivity under mild conditions. If incompatibilities between biology and microfabrication can be eliminated, then biofabrication will be poised to emerge as the standard for nanoscale construction.

Animals↗

PubMed2003

Chitosan scaffolds for biomolecular assembly: coupling nucleic acid probes for detecting hybridization.

Chitosan, a naturally occurring biopolymer, was used as a scaffold for the covalent binding of single-stranded DNA oligonucleotide probes in a fluorescence-based nucleic acid hybridization assay. Chitosan's pH dependent chemical and electrostatic properties enable its deposition on electrodes and metal surfaces, as well as on the bottom of microtiter plates. A combinatorial 96-well microtiter plate format was used to optimize chemistries and reaction conditions leading to hybridization experiments. We found the coupling of oligonucleotides using relatively common glutaraldehyde chemistry was quite robust. Our hybridization results for complementary ssDNA oligonucleotides (E. coli dnaK sequences) demonstrated linear fluorescence intensity with concentration of E. coli dnaK-specific oligonucleotide from 0.73 microM to 6.6 microM. Moreover, hybridization assays were specific as there was minimal fluorescence associated with noncomplementary groEL oligonucleotide. Finally, these results demonstrate the portability of a DNA hybridization assay based on covalent coupling to chitosan, which, in turn, can be deposited onto various surfaces. More arduous surface preparation techniques involving silanizing agents and hazardous washing reagents are eliminated using this technique.

Chitin↗

PubMed2003

Enzyme-catalyzed gel formation of gelatin and chitosan: potential for in situ applications.

We compared the ability of two enzymes to catalyze the formation of gels from solutions of gelatin and chitosan. A microbial transglutaminase, currently under investigation for food applications, was observed to catalyze the formation of strong and permanent gels from gelatin solutions. Chitosan was not required for transglutaminase-catalyzed gel formation, although gel formation was faster, and the resulting gels were stronger if reactions were performed in the presence of this polysaccharide. Consistent with transglutaminase's ability to covalently crosslink proteins, we observed that the transglutaminase-catalyzed gelatin-chitosan gels lost the ability to undergo thermally reversible transitions (i.e. sol-gel transitions) characteristic of gelatin. Mushroom tyrosinase was also observed to catalyze gel formation for gelatin-chitosan blends. In contrast to transglutaminase, tyrosinase-catalyzed reactions did not lead to gel formation unless chitosan was present (i.e. chitosan is required for tyrosinase-catalyzed gel formation). Tyrosinase-catalyzed gelatin-chitosan gels were observed to be considerably weaker than transglutaminase-catalyzed gels. Tyrosinase-catalyzed gels were strengthened by cooling below gelatin's gel-point, which suggests that gelatin's ability to undergo a collagen-like coil-to-helix transition is unaffected by tyrosinase-catalyzed reactions. Further, tyrosinase-catalyzed gelatin-chitosan gels were transient as their strength (i.e. elastic modulus) peaked at about 5h after which the gels broke spontaneously over the course of 2 days. The strength of both transglutaminase-catalyzed and tyrosinase-catalyzed gels could be adjusted by altering the gelatin and chitosan compositions. Potential applications of these gels for in situ applications are discussed.

Biocompatible Materials↗