PubMed Health⌕ Search

Biomedical subjects

Gregory N Tew

Publications and source records attributed to Gregory N Tew.

At least 19 recordsLinked to original sources
PubMed2007

Spin system assignment of homo-o-phenylene ethynylene oligomers.

We previously reported the synthesis and solution characterization of short o-phenylene ethynylene (oPE) foldamers. Proton correlation techniques are not adequate for NMR assignment in these compounds as the ethynylene linkers interrupt proton connectivity. In order to facilitate structural characterization and more fully harness the power of NMR, it is necessary to know the sequence of spin systems along the molecular backbone. For example, spin system assignment is required to unambiguously assign NOE correlations for structural determination of folded forms in solution. Therefore, we developed a method to assign the aromatic spin systems in these compounds using HMBC experiments. This has been performed for tetrameric (Es4), pentameric (Es5), and hexameric (Es6) oligomers and is expected to prove useful for this class of foldamers in general. The proton assignments obtained by this technique have been useful toward confirming the previous hypotheses of helical folding in oPE systems.

Alkynes↗
PubMed2006

Amphiphilic poly(phenyleneethynylene)s can mimic antimicrobial peptide membrane disordering effect by membrane insertion.

Antimicrobial peptides (AMPs) are a class of peptides that are innate to various organisms and function as a defense agent against harmful microorganisms by means of membrane disordering. Characteristic chemical and structural properties of AMPs allow selective interaction and subsequent disruption of invaders' cell membranes. Polymers based on m-phenylene ethynylenes (mPE) were designed and synthesized to mimic the amphiphilic, cationic, and rigid structure of AMPs and were found to be good mimics of AMPs in terms of their high potency toward microbes and low hemolytic activities. Using a Langmuir monolayer insertion assay, two mPEs are found to readily insert into anionic model bacterial membranes but to differ in the degree of selectivity between bacterial and mammalian erythrocyte model membranes. Comparison of grazing incidence X-ray diffraction (GIXD) data before and after the insertion of mPE clearly indicates that the insertion of mPE disrupts lipid packing, altering the tilt of the lipid tail. X-ray reflectivity (XR) measurements of the lipid/mPE system demonstrate that mPE molecules insert through the headgroup region and partially into the tail group region, thus accounting for the observed disordering of tail packing. This study demonstrates that mPEs can mimic AMP's membrane disordering.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2006

Liquid crystalline order from ortho-phenylene ethynylene macrocycles.

Triangular ortho-phenylene ethynylene (o-PE) cyclic trimers represent a novel member of shape-persistent macrocycles. Shape-persistent cyclic structures remain of great interest as molecular components in the fields of supramolecular materials, host-guest chemistry, and materials science. Novel discotic liquid crystalline properties are reported from triangular-shaped o-PE macrocycles containing branched alkoxy- and/or triethylene glycol (TEG) side chains using polarized optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The macrocycles self-assemble into thermotropic rectangular columnar (Colr) (for M1), hexagonal columnar (Colh) (for M2), and discotic nematic (for M3) mesophases at room temperature. This work shows clearly that electron-rich PE macrocycles can form LC materials. Alkyl side chains in M1 promote order, while hydrophilic side chains of M2 generate an amphiphilic structure that provides a different driving force for organization. The ability to create ordered self-assembling materials from these novel electron-rich macrocycles is important in nanotechnology.

Journal Article↗
PubMed2006

Antimicrobial activity of an abiotic host defense peptide mimic.

Bacterial drug resistance is emerging as one of the most significant challenges to human health. Antimicrobial peptides (AMPs), which are produced by many tissues and cell types of invertebrates, insects, and humans, as part of their innate immune system, have attracted considerable interest as alternative antibiotics. Interest in novel mimics of AMPs has increased greatly over the last few years. This report details a new AMP mimic, based on phenylene ethynylene, with improved antimicrobial activity and selectivity. Screening against a large set of bacterial and other organisms demonstrates broad spectrum antimicrobial activity including activity against antibiotic resistant bacterial like methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococci (VRE) as well as activity against yeast (Candida albicans) and fungus (Stachybotrys chartarum). Bacterial resistance development studies using Staphylococcus aureus show a rapid increase in MIC for conventional antibiotics, ciprofloxacin and norfloxacin. In sharp contrast, no change in MIC was observed for the AMP mimic. Cytotoxicity experiments show that the AMP mimic acts preferentially on microbes as opposed to mammalian red blood cells, 3T3 fibroblasts, and HEPG2 cells. In vivo experiments determined the maximum tolerated dose (MTD) to be 10 mg/kg suggesting a therapeutic window is available. These studies indicate that nonpeptidic amphiphilic AMP mimics could be developed as potential new treatments for antibiotic-resistant bacterial infections.

Anti-Infective Agents↗
PubMed2006

Self-assembled structures with liquid-crystalline order in aqueous solution by patterning poly(phenylene ethynylene)s.

Facially amphiphilic (FA) phenylene ethynylene (PE) polymers that self-assemble in aqueous solution were studied by small-angle X-ray diffraction (SAXD) and found to self-assemble into bilayers with a fully extended backbone. The resulting bilayers have long-range liquid-crystalline order. This self-assembly is programmed into the molecule by placing polar and nonpolar groups at precise locations so that they segregate onto opposite sides of the molecular structure. The absence of FA patterning generated an amorphous sample confirming the importance of this programmed amphiphilicity in the self-assembly process. Facially amphiphilic patterning represents a new design criterion for supramolecular chemistry, illustrated here in the observation of molecular ordering into bilayers reminiscent of self-assembled structures commonly found in biology, including amphiphilic beta-sheet polypeptides and phospholipid bilayers.

Liquid Crystals↗
PubMed2006

Membrane activity of biomimetic facially amphiphilic antibiotics.

Membranes are a central feature of all biological systems, and their ability to control many cellular processes is critically important. As a result, a better understanding of how molecules bind to and select between biological membranes is an active area of research. Antimicrobial host defense peptides are known to be membrane-active and, in many cases, exhibit discrimination between prokaryotic and eukaryotic cells. The design of synthetic molecules that capture the biological activity of these natural peptides has been shown. In this report, the interaction between our biomimetic structures and different biological membranes is reported using both model vesicle and in vitro bacterial cell experiments. Compound 1 induces 12% leakage at 20 microg/mL against phosphatidylglycerol (PG)-phosphatidylethanolamine (PE) vesicles vs only 3% leakage at 200 microg/mL against phosphatidyl-L-serine (PS)-phosphatidylcholine (PC) vesicles. Similarly, a 40% reduction in fluorescence is measured in lipid movement experiments for PG-PE compared to 10% for PS-PC at 600 s. A 30 degrees C increase in the phase transition of stearoyl-oleoyl-phosphatidylserine is observed in the presence of 1. These results show that lipid composition is more important for selectivity than overall net charge. Additionally, the overall concentration of a given lipid is another important factor. An effort is made to connect model vesicle studies with in vitro data and naturally occurring lipid compositions.

Algorithms↗
PubMed2006

Observing a molecular knife at work.

Sum frequency generation (SFG) vibrational spectroscopy has been employed to study the molecular interactions between a single substrate supported lipid bilayer and an amphiphilic antibiotic compound 1, with a design based on the common structural motif of natural antimicrobial peptides. The interfacial sensitivity of SFG allows real-time in situ monitoring of ordering changes in both leaflets of the bilayer and orientation of 1 simultaneously. A critical concentration of about 0.8 microg/mL of 1 is found, above which the inner leaflet of the bilayer is significantly perturbed. This concentration corresponds well to the minimum inhibition concentration of 1 that is obtained from bacterial experiments. Orientation of 1 in the bilayer is shown to be perpendicular to the bilayer surface, in agreement with simulation results. SFG can be developed into a very informative technique for studying the cell membrane and the interactions of membrane-active molecules.

Amides↗
PubMed2006

Novel drug release profiles from micellar solutions of PLA-PEO-PLA triblock copolymers.

We have achieved nearly zero order sustained release behavior for periods up to 10-20 days for two hydrophobic drugs, sulindac and tetracaine, from 5wt.% micellar solutions of poly(lactide)-poly(ethylene oxide)-poly(lactide) (PLA-PEO-PLA) triblock copolymer. The effect of PLA block length and crystallinity on the drug release profiles was studied. A series of polymers with constant PEO molecular weight of 8900Da and PLA molecular weight varying in the range of 4100-6500Da were examined. Drug release was found to be much faster for polymers with crystalline PLA blocks as compared to those with amorphous PLA blocks. The drug release rate also depends significantly on the length of the PLA block. Sustained release of sulindac was observed up to 20 days, and for tetracaine up to 10 days. By comparison, release of these drugs without polymeric carriers occurs over 4-6h. This result, along with a proposed mechanism for drug release, suggests that polymer-drug interactions significantly impact release profiles, causing slow and sustained release of the drug.

Crystallization↗
PubMed2006

Biomimetic facially amphiphilic antibacterial oligomers with conformationally stiff backbones.

A foldamer has been designed with a conformationally stiff backbone that is facially amphiphilic. The oligomer has excellent antimicrobial activity and was found to be 18 times more active toward bacterial cells than human red blood cells. The oligomer is built from arylamide bonds around a central 4,6-dicarboxy pyrimidine ring. The conformation was studied by X-ray crystallography and solution NMR spectroscopy. Density-functional (DFT) calculations were performed to guide the design. These calculations accurately predicted the overall conformation as well as NMR chemical shifts. Antibacterial activity was demonstrated against E. coli, a gram-negative strain, and B. subtilis, a gram-positive strain. The minimal inhibitory concentration is 0.8 microg/ml.

Anti-Bacterial Agents↗
PubMed2006

Broad-spectrum antibacterial activity by a novel abiogenic peptide mimic.

The human-mediated use and abuse of classical antibiotics has created a strong selective pressure for the rapid evolution of antibiotic resistance. As resistance levels rise, and the efficacy of classical antibiotics wanes, the intensity of the search for alternative antimicrobials has increased. One class of molecules that has attracted much attention is the antimicrobial peptides (AMPs). They exhibit broad-spectrum activity, they are potent and they are widespread as part of the innate defence system of both vertebrates and invertebrates. However, peptides are complex molecules that suffer from proteolytic degradation. The ability to capture the essential properties of antimicrobial peptides in simple easy-to-prepare molecules that are abiotic in origin and non-proteolytic offers many advantages. Mechanistic and structural knowledge of existing AMPs was used to design a novel compound that mimics the biochemical activity of an AMP. This report describes the development and in vitro characterization of a small peptide mimic that exhibited quick-acting and selective antibacterial activity against a broad range of bacteria, including numerous clinically relevant strains, at low MIC values.

Anti-Bacterial Agents↗
PubMed2005

Solution 1H NMR confirmation of folding in short o-phenylene ethynylene oligomers.

Oligomers based on an o-phenylene ethynylene (oPE) backbone with polar substituents have been synthesized using Sonogashira methods. Folding of these extremely short oligomers was confirmed via 1D and 2D (NOESY) NMR methods. Utilizing electron-rich and electron-poor phenylene building blocks, variations of these oPE oligomers have been synthesized to determine the folded stability of pi-rich vs pi-poor vs pi-rich-pi-poor systems. Slight variations in temperature offer a route, aside from solvent denaturation, to probe the stability of the folded structure. This is the first report of an NMR solution characterization of folding for a PE backbone without hydrogen bonds.

Alkynes↗
PubMed2005

Unique emission from polymer based lanthanide alloys.

The incorporation of metal-ligand interactions into macromolecules imparts them with unique and potentially useful properties. We report novel macromolecules prepared via ATRP that contain activated esters for subsequent incorporation of terpyridine. The addition of lanthanide ions (Eu3+ and Tb3+) gave metal functionalized polymers that exhibited excellent emission of either pink (Eu3+) or green (Tb3+) light. A unique yellow luminescence was generated when these two different metal ions were incorporated into the same molecular backbone at a 1:1 ratio, producing an alloy. Upon heating above 50 degrees C, selective thermochromism, from yellow to orange/pink, was observed.

Journal Article↗
PubMed2005

Simple oligomers as antimicrobial peptide mimics.

New approaches to antibiotic design are desperately needed. The design of simple oligomers that capture the shape and biological function of natural antimicrobial peptides could prove to be versatile and highly successful. We discuss the use of aromatic backbones to design facially amphiphilic (FA) beta-sheet like structures which are potently antimicrobial. These oligomers capture the physiochemical properties of peptides like the Magainins and Defensins, which fold into specific conformations that are amphiphilic resulting in antimicrobial activity. However, natural peptides are expensive to prepare and difficult to produce on large scale. The design of polymers and oligomers that mimic the complex structures and remarkable biological properties of proteins is an important endeavor and provides attractive alternatives to the difficult synthesis of natural peptides. We therefore have designed a series of FA oligomers that are easy to prepare from inexpensive monomers. They adopt structures very reminiscent of amphiphilic beta-sheets and have significant activity with minimal inhibitory concentrations at 6 h in the low microgram per ml range (muM to nM). They are active against a broad spectrum of bacteria including gram-positive and gram-negative as well as antibiotic resistant strains.

Amides↗
PubMed2005

Synthesis of urea oligomers and their antibacterial activity.

Facially amphiphilic urea oligomers were successfully prepared in a one-pot reaction by carbonyl diimidazole (CDI) coupling and showed greater antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis than MSI-78.

Anti-Bacterial Agents↗
PubMed2005

Supramolecular fluorophores for biological studies: phenylene vinylene-amino acid amphiphiles.

We report here on a family of self-assembling fluorescent organic amphiphiles with a biomolecular L-lysine hydrophile and a photonically active phenylene vinylene hydrophobe. Unlike conventional amphiphiles, these segmented dendrimers feature a rigid, branched hydrophobe, and have packing characteristics controlled by the ratio of cross-sectional areas of the hydrophobe and hydrophile. In dilute solution, the amphiphiles form supramolecular aggregates, which are easily taken in by cells through an endocytic pathway, and have no discernible effect on cell proliferation or morphology. An analogous pyrene-based amphiphile was cytotoxic, suggesting that cell survival may be linked either to the self-assembling nature of the amphiphiles, or to the specific properties of the phenylene vinylene segment. The combination of photonic and biological components in these amphiphiles provides great potential for applications in sensing or delivery of molecules to intracellular targets.

Amino Acids↗
PubMed2004

Tuning the hemolytic and antibacterial activities of amphiphilic polynorbornene derivatives.

Amphiphilic cationic polynorbornene derivatives, soluble in water, were prepared from modular norbornene monomers, with a wide range of molecular weights (M(n) = 1600-137 500 g/mol) and narrow polydispersities (PDI = 1.1-1.3). The antibacterial activity determined by growth inhibition assays and the hemolytic activity against human red blood cells were measured and compared to determine the selectivity of the polymers for bacterial over mammalian cells. The effects of monomer repeat unit hydrophobicity and polymer molecular weight on antibacterial and hemolytic activities were determined. The hydrophobicity of the repeat unit was observed to have dramatic effects on antibacterial and hemolytic activities. Lipid membrane disruption activities of the polymers was confirmed by measuring polymer-induced dye leakage from large unilamellar vesicles. By tuning the overall hydrophobicity of the polymer through random copolymerizations of modular norbornene derivatives, highly selective, nonhemolytic antibacterial activities were obtained. For appropriate monomer composition, selectivity against bacteria versus human red blood cells was determined to be over 100.

Anti-Bacterial Agents↗
PubMed2004

Controlling the conformation of arylamides: computational studies of intramolecular hydrogen bonds between amides and ethers or thioethers.

The role of an ortho-alkylthioether group in controlling the conformation around the ring-N bonds of meta-connected arylamide oligomers is studied. Density functional theory (DFT) geometries of model compounds, including acetanilide, an ether acetanilide, and a thioether acetanilide, and their corresponding diamides, show that for either monoamide or diamide the alkyl side chain of the thioether should be perpendicular to the aryl plane, whereas for the ether monoamide, the alkyl side chain is in the aryl plane. DFT ring-N torsional potentials and constrained geometries of the model compounds demonstrate that carbonyl-S repulsion leads to a high torsional barrier and that intramolecular N-H...S and C-H...O hydrogen bonds and ring-amide conjugation lead to N-H having a preferred orientation in the benzene plane pointing towards S. The N-H bond lengthens and the ortho-ring C-H bond shortens in a regular pattern in the approach to the preferred orientation. Calculated IR frequencies for the N-H stretch show a clear red shift between model compounds without and with the thioether side chain.

Amides↗