Biomedical subjects

Gregory S Ferguson

Publications and source records attributed to Gregory S Ferguson.

4 recordsLinked to original sources

PubMed2004

Temperature-actuated changes in wettability at elastomer/water interfaces.

Surface modification of 1,4-polybutadiene and cis-1,4-polyisoprene to introduce polar functional groups provided surfaces that reconstructed reversibly against water as a function of temperature. These surfaces became hydrophobic in contact with hot water, but their original hydrophilicity returned upon equilibration against cold water. Repeated cycling between hot and cold water, however, led to a damping of this reversibility. A series of parallel experiments on both the interfacial and bulk behavior of these elastomers strongly indicated that this damping was due to the alignment of extended interfacial chains during temperature cycling and to a decay of the restoring force on the interfacial chains under extension. These studies thus demonstrate that the interfacial behavior of elastomers can display close analogies to the bulk viscoelastic properties of the solid.

Journal Article↗

PubMed2003

Preparation of thin silica films with controlled thickness and tunable refractive index.

Silica films with controlled thickness and refractive index have been formed by the sequential adsorption of a cationic polyelectrolyte and silica sols. The conditions used to prepare the sol were varied, and allowed films with refractive indices as low as 1.16 to be obtained. The sequential adsorption technique allows the thickness of these films to be controlled in increments of 5-10 nm, depending on the desired refractive index. Scanning electron microscopy revealed that a low packing density of constituent silica particles was responsible for the low indices of these films. The as-adsorbed films are thermally robust; calcination at 500 degrees C resulted in only very small decreases in film thickness (by < or =1.8%) and refractive index (to as low as 1.14). After calcination, the silica films remained hydrophilic and sorbed water vapor from the atmosphere. As a result, the refractive indices of these films increased with increasing relative humidity (RH). The dependence of the refractive index on RH was eliminated by treating the calcined films with trimethylchlorosilane.

Journal Article↗

PubMed2002

A smart adhesive joint: entropic control of adhesion at a polymer/metal interface.

The study of adhesion has a long and rich history, with theory, experiments, and applications bridging numerous disciplines, including physics, chemistry, engineering, and medicine. This diverse interest has led to the development of a large number of methods for both enhancing and inhibiting adhesion at specific interfaces of interest. We report herein "smart" adhesion at a polymer/metal (oxide) interface that responds reversibly to changes in temperature by increasing or decreasing in magnitude. The temperature dependence in this system arises from the rubber elasticity of the polymer, 1,4-polybutadiene, and mirrors the interfacial behavior of the same polymer against water. Such systems offer unique opportunities for designing responsive materials whose properties can be actively controlled.

Journal Article↗

PubMedDate not supplied

A method for imaging single clay platelets by scanning electron microscopy.

A method for preparing and observing clay platelets for size and shape analysis using scanning electron microscopy (SEM) was developed. Samples of the clay platelets were prepared by polyelectrolyte-assisted adsorption onto a pyrolytic graphite surface. The use of graphite as a substrate was advantageous because of the low number of secondary electrons emitted from it during imaging by SEM. The resulting low background noise allowed the emission from the approximately 1 nm thick clay sheets to be clearly visualized. Images of centrifuged montmorillonite showed large exfoliated platelets with lateral dimensions between 200 and 600 nm. In contrast, uncentrifuged montmorillonite appeared to contain a large amount of unexfoliated clusters. Although it was not possible to obtain high-quality images of the smaller sheets of Laponite RD, the images of this material did contain size features comparable to the approximately 30 nm2 size reported previously using light scattering, as well as transmission electron and atomic force microscopies.

Journal Article↗