PubMed Health⌕ Search

Biomedical subjects

Grzegorz M Popowicz

Publications and source records attributed to Grzegorz M Popowicz.

11 recordsLinked to original sources

Characterization of 14-3-3sigma dimerization determinants: requirement of homodimerization for inhibition of cell proliferation.

The seven highly conserved 14-3-3 proteins expressed in mammalian cells form a complex pattern of homo- and hetero-dimers, which is poorly characterized. Among the 14-3-3 proteins 14-3-3sigma is unique as it has tumor suppressive properties. Expression of 14-3-3sigma is induced by DNA damage in a p53-dependent manner and mediates a cell cycle arrest. Here we show that the 14-3-3sigma protein exclusively forms homodimers when it is ectopically expressed at high levels, whereas ectopic 14-3-3zeta formed heterodimers with the five other 14-3-3 isoforms. The x-ray structure of 14-3-3sigma revealed five residues (Ser5, Glu20, Phe25, Q55, Glu80) as candidate determinants of dimerization specificity. Here we converted these amino-acids to residues present in 14-3-3zeta at the analogous positions. Thereby, Ser5, Glu20 and Glu80 were identified as key residues responsible for the selective homodimerization of 14-3-3sigma. Conversion of all five candidate residues was sufficient to switch the dimerization pattern of 14-3-3sigma to a pattern which is very similar to that of 14-3-3zeta. In contrast to wildtype 14-3-3sigma this 14-3-3sigma variant and 14-3-3zeta were unable to mediate inhibition of cell proliferation. Therefore, homodimerization by 14-3-3sigma is required for its unique functions among the seven mammalian 14-3-3 proteins. As inactivation of 14-3-3sigma sensitizes to DNA-damaging drugs, substances designed to interfere with 14-3-3sigma homodimerization may be used to inactivate 14-3-3sigma function for cancer therapeutic purposes.

14-3-3 Proteins↗

Structural basis for the inhibition of insulin-like growth factors by insulin-like growth factor-binding proteins.

Insulin-like growth factor-binding proteins (IGFBPs) control bioavailability, activity, and distribution of insulin-like growth factor (IGF)1 and -2 through high-affinity IGFBP/IGF complexes. IGF-binding sites are found on N- and C-terminal fragments of IGFBPs, the two conserved domains of IGFBPs. The relative contributions of these domains to IGFBP/IGF complexation has been difficult to analyze, in part, because of the lack of appropriate three-dimensional structures. To analyze the effects of N- and C-terminal domain interactions, we determined several x-ray structures: first, of a ternary complex of N- and C-terminal domain fragments of IGFBP4 and IGF1 and second, of a "hybrid" ternary complex using the C-terminal domain fragment of IGFBP1 instead of IGFBP4. We also solved the binary complex of the N-terminal domains of IGFBP4 and IGF1, again to analyze C- and N-terminal domain interactions by comparison with the ternary complexes. The structures reveal the mechanisms of IGF signaling regulation via IGFBP binding. This finding supports research into the design of IGFBP variants as therapeutic IGF inhibitors for diseases of IGF disregulation. In IGFBP4, residues 1-38 form a rigid disulphide bond ladder-like structure, and the first five N-terminal residues bind to IGF and partially mask IGF residues responsible for the type 1 IGF receptor binding. A high-affinity IGF1-binding site is located in a globular structure between residues 39 and 82. Although the C-terminal domains do not form stable binary complexes with either IGF1 or the N-terminal domain of IGFBP4, in the ternary complex, the C-terminal domain contacts both and contributes to blocking of the IGF1 receptor-binding region of IGF1.

Amino Acid Sequence↗

Filamins: promiscuous organizers of the cytoskeleton.

Filamins are elongated homodimeric proteins that crosslink F-actin. Each monomer chain of filamin comprises an actin-binding domain, and a rod segment consisting of six (Dictyostelium filamin) up to 24 (human filamin) highly homologous repeats of approximately 96 amino acid residues, which adopt an immunoglobulin-like fold. Two hinges in the rod segment, together with the reversible unfolding of single repeats, might be the structural basis for the intrinsic flexibility of the actin networks generated by filamins. There are numerous filamin-binding proteins that associate, in most cases, along the repeats of the rod repeats. This rather promiscuous behaviour renders filamin a versatile scaffold between the actin network and finely tuned molecular cascades from the membrane to the cytoskeleton.

Actins↗

Structure of the N-terminal domain of the FOP (FGFR1OP) protein and implications for its dimerization and centrosomal localization.

The fibroblast growth factor receptor 1 (FGFR1) oncogene partner, FOP, is a centrosomal protein that is involved in the anchoring of microtubules (MTS) to subcellular structures. The protein was originally discovered as a fusion partner with FGFR1 in oncoproteins that give rise to stem cell myeloproliferative disorders. A subsequent proteomics screen identified FOP as a component of the centrosome. FOP contains a Lis-homology (LisH) motif found in more than 100 eukaryotic proteins. LisH motifs are believed to be involved in microtubule dynamics and organization, cell migration, and chromosome segregation; several of them are associated with genetic diseases. We report here a 1.6A resolution crystal structure of the N-terminal dimerization domain of FOP. The structure comprises an alpha-helical bundle composed of two antiparallel chains, each of them having five alpha-helices. The central part of the dimer contains the LisH domain. We further determined that the FOP LisH domain is part of a longer N-terminal segment that is required, albeit not sufficient, for dimerization and centrosomal localization of FOP.

Amino Acid Motifs↗

Functional and structural characterization of Spl proteases from Staphylococcus aureus.

Staphylococcus aureus is the major cause of nosocomial infections world-wide, with increasing prevalence of community-acquired diseases. The recent dramatic increase in multi-antibiotic resistance, including resistance to the last-resort drug, vancomycin, together with the lack of an effective vaccine highlight the need for better understanding of S.aureus pathogenicity. Comparative analysis of available bacterial genomes allows for the identification of previously uncharacterized S.aureus genes with potential roles in pathogenicity. A good example is a cluster of six serine protease-like (spl) genes encompassed in one operon, which encode for putative proteases with similarity to staphylococcal glutamylendopeptidase (V8 protease). Here, we describe an efficient expression system for the production of recombinant SplB and SplC proteases in Escherichia coli, together with structural and functional characterization of the purified enzymes. A unique mechanism of cytoplasm protection against activity of misdirected SplB was uncovered. Apparently, the co-translated signal peptide maintains protease latency until it is cleaved by the signal peptidase during protein secretion. Furthermore, the crystal structure of the SplC protease revealed a fold resembling that of the V8 protease and epidermolytic toxins. Arrangement of the active site cleft and substrate-binding pocket of SplC explains the mechanism of enzyme latency and suggests that some Spl proteases possess restricted substrate specificity similar to that of the V8 protease and epidermolytic toxins.

Amino Acid Sequence↗

Study of a major intermediate in the oxidative folding of leech carboxypeptidase inhibitor: contribution of the fourth disulfide bond.

The oxidative folding pathway of leech carboxypeptidase inhibitor (LCI; four disulfide bonds) proceeds through the formation of two major intermediates (III-A and III-B) that contain three native disulfide bonds and act as strong kinetic traps in the folding process. The III-B intermediate lacks the Cys19-Cys43 disulfide bond that links the beta-sheet core with the alpha-helix in wild-type LCI. Here, an analog of this intermediate was constructed by replacing Cys19 and Cys43 with alanine residues. Its oxidative folding follows a rapid sequential flow through one, two, and three disulfide species to reach the native form; the low accumulation of two disulfide intermediates and three disulfide (scrambled) isomers accounts for a highly efficient reaction. The three-dimensional structure of this analog, alone and in complex with carboxypeptidase A (CPA), was determined by X-ray crystallography at 2.2A resolution. Its overall structure is very similar to that of wild-type LCI, although the residues in the region adjacent to the mutation sites show an increased flexibility, which is strongly reduced upon binding to CPA. The structure of the complex also demonstrates that the analog and the wild-type LCI bind to the enzyme in the same manner, as expected by their inhibitory capabilities, which were similar for all enzymes tested. Equilibrium unfolding experiments showed that this mutant is destabilized by approximately 1.5 kcal mol(-1) (40%) relative to the wild-type protein. Together, the data indicate that the fourth disulfide bond provides LCI with both high stability and structural specificity.

Animals↗

The three-dimensional structures of tick carboxypeptidase inhibitor in complex with A/B carboxypeptidases reveal a novel double-headed binding mode.

The tick carboxypeptidase inhibitor (TCI) is a proteinaceous inhibitor of metallo-carboxypeptidases present in the blood-sucking tick Rhipicephalus bursa. The three-dimensional crystal structures of recombinant TCI bound to bovine carboxypeptidase A and to human carboxypeptidase B have been determined and refined at 1.7 A and at 2.0 A resolution, respectively. TCI consists of two domains that are structurally similar despite the low degree of sequence homology. The domains, each consisting of a short alpha-helix followed by a small twisted antiparallel beta-sheet, show a high level of structural homology to proteins of the beta-defensin-fold family. TCI anchors to the surface of mammalian carboxypeptidases in a double-headed manner not previously seen for carboxypeptidase inhibitors: the last three carboxy-terminal amino acid residues interact with the active site of the enzyme in a way that mimics substrate binding, and the N-terminal domain binds to an exosite distinct from the active-site groove. The structures of these complexes should prove valuable in the applications of TCI as a thrombolytic drug and as a basis for the design of novel bivalent carboxypeptidase inhibitors.

Amino Acid Motifs↗

Structural basis for the regulation of insulin-like growth factors by IGF binding proteins.

Insulin-like growth factor binding proteins (IGFBPs) control the extracellular distribution, function, and activity of IGFs. Here, we report an X-ray structure of the binary complex of IGF-I and the N-terminal domain of IGFBP-4 (NBP-4, residues 3-82) and a model of the ternary complex of IGF-I, NBP-4, and the C-terminal domain (CBP-4, residues 151-232) derived from diffraction data with weak definition of the C-terminal domain. These structures show how the IGFBPs regulate IGF signaling. Key features of the structures include (1) a disulphide bond ladder that binds to IGF and partially masks the IGF residues responsible for type 1 IGF receptor (IGF-IR) binding, (2) the high-affinity IGF-I interaction site formed by residues 39-82 in a globular fold, and (3) CBP-4 interactions. Although CBP-4 does not bind individually to either IGF-I or NBP-4, in the ternary complex, CBP-4 contacts both and also blocks the IGF-IR binding region of IGF-I.

Amino Acid Sequence↗

NMR structural characterization and computational predictions of the major intermediate in oxidative folding of leech carboxypeptidase inhibitor.

The III-A intermediate constitutes the major rate-determining step in the oxidative folding of leech carboxypeptidase inhibitor (LCI). In this work, III-A has been directly purified from the folding reaction and structurally characterized by NMR spectroscopy. This species, containing three native disulfides, displays a highly native-like structure; however, it lacks some secondary structure elements, making it more flexible than native LCI. III-A represents a structurally determined example of a disulfide-insecure intermediate; direct oxidation of this species to the fully native protein seems to be restricted by the burial of its two free cysteine residues inside a native-like structure. We also show that theoretical approaches based on topological constraints predict with good accuracy the presence of this folding intermediate. Overall, the derived results suggest that, as it occurs with non-disulfide bonded proteins, native-like interactions between segments of secondary structure rather than the crosslinking of disulfide bonds direct the folding of LCI.

Animals↗

The crystal structure of the non-liganded 14-3-3sigma protein: insights into determinants of isoform specific ligand binding and dimerization.

Seven different, but highly conserved 14-3-3 proteins are involved in diverse signaling pathways in human cells. It is unclear how the 14-3-3sigma isoform, a transcriptional target of p53, exerts its inhibitory effect on the cell cycle in the presence of other 14-3-3 isoforms, which are constitutively expressed at high levels. In order to identify structural differences between the 14-3-3 isoforms, we solved the crystal structure of the human 14-3-3sigma protein at a resolution of 2.8 Angstroms and compared it to the known structures of 14-3-3zeta and 14-3-3tau. The global architecture of the 14-3-3sigma fold is similar to the previously determined structures of 14-3-3zeta and 14-3-3t: two 14-3-3sigma molecules form a cup-shaped dimer. Significant differences between these 14-3-3 isoforms were detected adjacent to the amphipathic groove, which mediates the binding to phosphorylated consensus motifs in 14-3-3-ligands. Another specificity determining region is localized between amino-acids 203 to 215. These differences presumably select for the interaction with specific ligands, which may explain the different biological functions of the respective 14-3-3 isoforms. Furthermore, the two 14-3-3sigma molecules forming a dimer differ by the spatial position of the ninth helix, which is shifted to the inside of the ligand interaction surface, thus indicating adaptability of this part of the molecule. In addition, 5 non-conserved residues are located at the interface between two 14-3-3sigma proteins forming a dimer and represent candidate determinants of homo- and hetero-dimerization specificity. The structural differences among the 14-3-3 isoforms described here presumably contribute to isoform-specific interactions and functions.

14-3-3 Proteins↗

Molecular structure of the rod domain of dictyostelium filamin.

Dictyostelium discoideum filamin (ddFLN) is a two-chain F-actin crosslinking protein with an N-terminal actin-binding domain and a rod domain constructed from six tandem repeats of a 100 residue motif that has an immunoglobulin (Ig) fold. We report the 2.8 A resolution crystal structure of a homodimer of rod repeats 4, 5 and 6. The two chains are arranged in an antiparallel fashion and form an elongated element, which is shortened, however, compared to a fully extended, linear configuration because the long axis of each Ig domain is arranged at an angle to the long axis of the rod. Same arrangement of repeats should also be present in the rod domain of human FLNa, much longer than Dictyostelium FLN, which forms an extended structure able to crosslink F-actin chains over distances of more than 1000 A.

Actins↗