Biomedical subjects

Guangzhao Mao

Publications and source records attributed to Guangzhao Mao.

11 recordsLinked to original sources

PubMed2006

Disassembly of layer-by-layer films of plasmid DNA and reducible TAT polypeptide.

This paper reports the disassembly of layer-by-layer (LbL) films of plasmid DNA and a reducible cationic polypeptide. To utilize a reducing microenvironment of cellular plasma membrane as a potential trigger, LbL films are assembled to contain both DNA and the TAT-based polypeptide (PTAT) with reducible disulfide bonds in the backbone. The assembly and disassembly processes are monitored by goniometry, ellipsometry, and atomic force microscopy (AFM). The structure of the PTAT films is compared with that of non-reducible poly(L-lysine) (PLL) films. Both PTAT and PLL films exhibit exponential growth but with the contact angle alternating between characteristic values. Ellipsometry and AFM show a gradual and complete disassembly of the PTAT but not the PLL films in a 24h period in the reducing environment in vitro. This study suggests a potential of using reducible LbL films for controlled DNA delivery.

DNA↗

PubMed2006

From ribbons to nanodot arrays: nanopattern design through reductive annealing.

A new approach to the generation of nanoparticle arrays in periodic as well as non-periodic fashions has been discovered based on reduction of oxidized nanoscroll/nanoribbon precursors in the transmission electron microscope (carbothermal reduction) or by hydrogen annealing. Arrays consisting of nickel arsenide nanoparticles of size 3-4 nm have been generated.

Journal Article↗

PubMed2005

Colloidal subwavelength nanostructures for antireflection optical coatings.

A two-dimensional (2D) subwavelength nanostructure for antireflection coating is fabricated upon a transparent substrate. Self-assembled 2D colloidal crystals are used as a nanoscale composite material with controlled thickness and low refractive index. The feature size of the structure is approximately 105 nm. The structure is used for antireflection coating, and the measured reflectivity of a glass substrate is reduced to 0.3%. Enhanced transmission through the substrate is also observed.

Journal Article↗

PubMed2005

Effect of chain lengths of PEO-PPO-PEO on small unilamellar liposome morphology and stability: an AFM investigation.

The morphology and stability of small unilamellar egg yolk phosphatidylcholine (EggPC) liposomes modified with the Pluronic copolymer (poly (oxyethylene)-poly (oxypropylene)-poly (oxyethylene) (PEO-PPO-PEO)) with different compositions on mica surface have been investigated using atomic force microscopy. Morphology studies reveal significant morphological changes of liposomes upon incorporating the Pluronic copolymer. Bilayers are observed for Pluronic with small hydrophilic (PEO) chain lengths such as L81 [(PEO)2(PPO)40(PEO)2] and L121 [(PEO)4(PPO)60(PEO)4]; bilayer and vesicle coexistence is observed for P85 [(PEO)26(PPO)39.5(PEO)26] and F87 [(PEO)61.1(PPO)39.7(PEO)61.1]; and stable vesicles are observed for F88 [(PEO)103.5(PPO)39.2(PEO)103.5], F127 [(PEO)100(PPO)65(PEO)100], and F108 [(PEO)132.6(PPO)50.3(PEO)132.6]. The micromechanical properties of Pluronic-modified EggPC vesicles were studied by analyzing AFM approaching force curve. The bending modulus (k(c)) of the Pluronic-modified EggPC vesicles increased several-fold compared with that of the pure EggPC vesicles. The significant difference is due to the enhanced rigidity of the EggPC vesicles as a result of the incorporation of PPO molecules and PEO chains. Based on the analysis of onset point by AFM and diameters of vesicles by light scattering, it was concluded that the favorable model to describe the polymer-bilayer interaction is the membrane-spanning model.

Drug Stability↗

PubMed2005

Influence of TAT-peptide polymerization on properties and transfection activity of TAT/DNA polyplexes.

Use of bioactive cationic peptides as gene carriers is limited by instability of their DNA complexes in vivo and by the loss of their biological activity due to undesired interactions of their bioactive parts with the DNA. To overcome the two major limitations, biodegradable high-molecular-weight form of TAT peptide (POLYTAT) sensitive to cellular redox-potential gradients was synthesized in this study by oxidative polycondensation. Physicochemical and transfection properties of DNA polyplexes based on POLYTAT were investigated and compared with polyplexes based on TAT polymer prepared by in situ template-assisted polymerization. Physicochemical properties of TAT-based polyplexes were affected by the molecular weight and method of polymerization of the TAT peptide. All TAT-based DNA polyplexes exhibited reduced cytotoxicity when compared with control polyethylenimine (PEI) polyplexes. Polyplexes based on both high-molecular-weight TAT polypeptides exhibited increased transfection efficiency compared to control TAT peptide but lower than that of PEI polyplexes. The evidence shows that transfection activity of TAT-based polyplexes is strongly dependent on the presence of chloroquine and therefore suggests that TAT polyplexes are internalized by an endocytosis. Overall, high-molecular-weight reducible polycations based on bioactive peptides has the potential as versatile carriers of nucleic acids that display low cytotoxicity and can prove to be especially beneficial in cases that require surface presentation of membrane-active or cell-specific targeting peptides.

Animals↗

PubMed2005

Deposition and aggregation of aspirin molecules on a phospholipid bilayer pattern.

Aspirin and 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE) are deposited from their alcoholic mixed solution onto highly oriented pyrolytic graphite (HOPG) by spin coating. The film structure and morphology are characterized by atomic force microscopy (AFM). The barely soluble DMPE forms a highly oriented stripe phase as a result of its one-dimensional epitaxy with the HOPG lattice. The bilayer stripe pattern exposes the cross section of the lipid bilayer lamellae and enables the direct visualization of the molecular interactions of drug or biological molecules with either the hydrophobic or the hydrophilic part of the phospholipid bilayer. The bilayer pattern affects the aspirin molecular deposition and aggregation. AFM shows that the aspirin molecules prefer to deposit and aggregate along the aliphatic interior part of the bilayer pattern, giving rise to parallel dimer rods in registry with the underlying pattern. The nonpolar interactions between aspirin and the phospholipid bilayer are consistent with the lipophilic nature of aspirin. The bilayer pattern not only stabilizes the rodlike aggregate structure of aspirin at low aspirin concentration but also inhibits crystallization of aspirin at high aspirin concentration. Molecular models show that the width of the DMPE aliphatic chain interior can accommodate no more than two aspirin dimers. The bilayer confinement may prevent aspirin from reaching its critical nucleus size. This study illustrates a general method to induce a metastable or amorphous form of an active pharmaceutical ingredient (API) by chemical confinement under high undercooling conditions. Metastable and amorphous solids often display better solubility and bioavailability than the stable crystalline form of the API.

Aspirin↗

PubMed2004

Particle-rod hybrids: growth of arachidic acid molecular rods from capped cadmium selenide nanoparticles.

This communication describes a spin-coating method to nucleate organic molecular rods of uniform size from an inorganic nanoparticle at a solid surface. The particle-rod hybrid structure spontaneously forms when a film is spin coated from a mixed 2-propanol solution of arachidic acid (AA) and nanoparticles of cadmium selenide capped by mercaptoundecanoic acid (MUA-CdSe) on graphite. AFM images show that MUA-CdSe nanoparticles nucleate single crystalline rods of AA with a cross section of a single unit cell of the C-form. The solution-based process potentially allows the precise tuning of the wetting profile of the solution on the surface-attached nanoparticle, which provides the reservoir for the growth of the single crystalline rods. The results suggest that nanoparticles can be regarded as nanoseeds for the nucleation of guest crystals. It should be possible to further functionalize the AA rods by electrostatic complexation with metal or organic ions.

Cadmium Compounds↗

PubMed2004

Mechanical properties and stability measurement of cholesterol-containing liposome on mica by atomic force microscopy.

The micromechanical properties of pure and cholesterol modified egg yolk phosphatidylcholine (EggPC) vesicles prepared by sonication were studied by atomic force microscopy (AFM) on mica surface. The force curves between an AFM tip and an unruptured vesicle were obtained by contact mode. During approach, two repulsion regions with two breaks were observed. The slopes of the two repulsive force regimes for the pure EggPC vesicles are determined to be several times lower than that of EggPC/cholesterol vesicles. The elastic properties from force plot analysis based on the Hertzian model showed that Young's modulus (E) and the bending modulus (kc) of cholesterol-modified vesicles increased several-fold compared with pure EggPC vesicles. The significant difference is attributed to the enhanced rigidity of the EggPC vesicles as a result of the incorporation of cholesterol molecules. The behavior of cholesterol-modified vesicles upon adsorption is different from that in solution as revealed by mechanical properties. The results indicate that AFM can provide a direct method to measure the mechanical properties of adsorbed small liposomes and to detect the stability change of liposomes.

Adsorption↗

PubMed2004

Fibronectin adsorption onto polyelectrolyte multilayer films.

The Layer-by-layer deposition of positively and negatively charged macromolecular species is an ideal method for constructing thin films incorporating biological molecules. We investigate the adsorption of fibronectin onto polyelectrolyte multilayer (PEM) films using optical waveguide lightmode spectroscopy (OWLS) and atomic force microscopy (AFM). PEM films are formed by adsorption onto Si(Ti)O2 from alternately introduced flowing solutions of anionic poly(sodium 4-styrenesulfonate) (PSS) and cationic poly(allylamine hydrochloride) (PAH). Using OWLS, we find the initial rate and overall extent offibronectin adsorption to be greatest on PEM films terminated with a PAH layer. The polarizability density of the adsorbed protein layer, as measured by its refractive index, is virtually identical on both PAH- and PSS-terminated films; the higher adsorbed density on the PAH-terminated film is due to an adsorbed layer of roughly twice the thickness. The binding of monoclonal antibodies specific to the protein's cell binding site is considerably enhanced to fibronectin adsorbed to the PSS layer, indicating a more accessible adsorbed layer. With increased salt concentration, we find thicker PEM films but considerably thinner adsorbed fibronectin layers, owing to increased electrostatic screening. Using AFM, we find adsorbed fibronectin layers to contain clusters; these are more numerous and symmetric on the PSS-terminated film. By considering the electrostatic binding of a segmental model fibronectin molecule, we propose a picture of fibronectin adsorbed primarily in an end-on-oriented monolayer on a PAH-terminated film and as clusters plus side-on-oriented isolated molecules onto a PSS-terminated film.

Adsorption↗

PubMed2004

Nanoscale aggregate structures of trisiloxane surfactants at the solid-liquid interface.

The self-associating structures at the solid-liquid interface of three nonionic trisiloxane surfactants ((CH3)3SiO)2Si(CH3)(CH2)3(OCH2CH2)n OH (n = 6, 8, and 12), or BEn, are studied as a function of substrate properties by atomic force microscopy (AFM) imaging and force measurement. These trisiloxane surfactants are known as superwetters, which promote rapid spreading of dilute aqueous solutions on low-energy surfaces. This study also attempts to relate the BEn surface aggregate structures at the solid-liquid interface to their superwetting behavior. Four substrates are used in the study: muscovite mica, highly oriented pyrolytic graphite, and oxidized silicon wafer with and without a full monolayer of self-assembled n-octadecyltrichlorosilane (OTS). The concentration of BEn is fixed at 2 times the critical aggregation concentration (CAC). The BEn surfactants are only weakly attracted to hydrophilic surfaces, more on oxidized silicon than on mica. All three form ordinary planar monolayers on HOPG and OTS-covered oxidized silicon. The significance of surfactant adsorption on the AFM tip is investigated by comparing the force curves obtained by tips with and without thiol modification. The surface aggregate structures of the BEn surfactants correlate with their bulk structures and do not exhibit anomalous adsorption behavior. The adsorption behavior of the BEn superwetters is similar to that of the CmEn surfactants. Thus, our results confirm previous work showing that superwetting shares its main features with other classes of surfactants.

Aluminum Silicates↗

PubMed2004

Probing small unilamellar EggPC vesicles on mica surface by atomic force microscopy.

Sonicated small unilamellar egg yolk phosphatidylcholine (EggPC) vesicles were investigated using atomic force microscopy (AFM) imaging and force measurements. Three different topographies (convex, planar, and concave shape) of the EggPC vesicles on the mica surface were observed by tapping mode in fluid, respectively. It was found that the topography change of the vesicles could be attributed to the interaction force between the AFM tip and vesicles. Force curves between an AFM tip and an unruptured vesicle were obtained in contact mode. During approach, two breaks corresponding to the abrupt penetration of upper and lower bilayer of vesicle were exhibited in the force curve. Both breaks spanned a distance of around 4 nm close to the EggPC bilayer thickness. Based on Hertz analysis of AFM approach force curves, the Young's modulus (E) and the bending modulus (kc) for pure EggPC vesicles were measured to be (1.97 +/- 0.75) x 10(6)Pa and (0.21 +/- 0.08) x 10(-19)J, respectively. The results show that the AFM can be used to obtain good images of intact and deformed vesicles by tapping mode, as well as to probe the integrity and bilayer structure of the vesicles. AFM force curve compare favorably with other methods to measure mechanical properties of soft samples with higher spatial resolution.

Adsorption↗