PubMed Health⌕ Search

Biomedical subjects

Guy J Clarkson

Publications and source records attributed to Guy J Clarkson.

15 recordsLinked to original sources
PubMed2006

Group 4 catalysts for ethene polymerization containing tetradentate salicylaldiminato ligands.

The structural properties of three new classes of titanium and zirconium complex bearing tetradentate salicylaldiminato proligands are elucidated using X-ray diffraction and NMR spectroscopy. On activation with MAO co-catalyst, their behaviour in ethene polymerization depends strongly on the nature of the structure and the substitution pattern. One titanium complex based on a 2-aminobenzylamine (C3-chain) backbone has a trans arrangement of the co-ligand sites and, unsurprisingly, does not polymerize ethene. The 1,8-diaminonaphthalene (C3-chain) backbone gives a rather ring-strained cis complex, but was also unproductive. A range of cis complexes of zirconium with the 2,2'-diaminobibenzyl (C6-chain) backbone give low to moderate productivities of multimodal poly(ethene), while in contrast the structurally analogous titanium compounds provide highly active, single site catalysts. Thermal degradation of these catalysts is slowed significantly by a substitution pattern on the phenolate unit which sterically protects the imine donor unit; a phenomenon which has been previously observed in much lower activity catalysts based on 2,2'-diaminobiphenyl (C4-chain) but which does not improve the stability of the very highly active unbridged systems.

Journal Article↗
PubMed2006

Carbene or zwitterion? Competition in organoplatinum complexes.

The reaction of a known dimeric dicarbene complex of platinum with a number of ligands results in four new platinum complexes. The structure of the new complexes is described: one complex must exist as a neutral complex with no charge separation, and the other three are assigned a charge-separated (zwitterionic) structure, rather than a carbene form, on the basis of comparative 13C NMR shifts.

Journal Article↗
PubMed2006

Far-red luminescent ruthenium pyridylimine complexes; building blocks for multinuclear arrays.

Ruthenium(II) pyridylimine complexes are explored for their potential as units that might be incorporated into electronic or photonic arrays. The complexes [Ru(bipy)2(L)][PF6]2 (1) and [Ru(tpy)(L)Cl][BF4] (2) with L = phenylpyridin-2-ylmethylene-amine are synthesized and fully characterised using X-ray diffraction analysis and (2D) NMR spectroscopy. 1 displays emission in the far-red area of the spectrum at room temperature. The emission is significantly shifted to longer wavelength with respect to [Ru(bpy)3]2+ indicating that the lowest MLCT state is localised on the pyridylimine ligand. 2 is non-emissive at room temperature and at 77 K.

Journal Article↗
PubMed2006

Synthesis of neoglycopolymers by a combination of "click chemistry" and living radical polymerization.

The synthesis of novel well-defined alkyne side chain functional polymers featuring narrow molecular weight distributions (PDI = 1.09-1.17) by living radical polymerization is described. Grafting of protected and unprotected carbohydrates is achieved via either a C-6 or an anomeric azide (alpha or beta) onto these polymers by Cu(I)-catalyzed "click chemistry", providing a simple and efficient route to synthetic glycopolymers. The strategy provides an extremely powerful tool for the synthesis of libraries of materials that differ only in the nature of the sugar moiety presented on a well-defined polymer scaffold. A library of multivalent ligands were then prepared following a "coclicking" synthetic protocol, and the reactivity of these glycopolymers in the presence of concanavalin A and Ricinus communis agglutinin, model lectins able to selectively bind appropriate mannose and galactose derivatives, respectively, was assessed.

Journal Article↗
PubMed2006

Aggregation of imine-based metallo-supramolecular architectures through pi-pi interactions.

The design of supramolecular architectures based on isoquinoline-imine ligand systems is described. The isoquinoline affords an extended pi surface and the use of this surface to obtain self-recognition and consequent pi-pi aggregation is investigated. The approach is effective in that each of four complexes is observed to aggregate through these interactions. Other pi-pi interactions can interfere with the aggregation indicating that a larger pi-surface may be required to obtain complete control over the aggregation of the units.

Journal Article↗
PubMed2006

Experimental and theoretical 17O NMR study of the influence of hydrogen-bonding on C=O and O-H oxygens in carboxylic solids.

A systematic solid-state 17O NMR study of a series of carboxylic compounds, maleic acid, chloromaleic acid, KH maleate, KH chloromaleate, K2 chloromaleate, and LiH phthalate.MeOH, is reported. Magic-angle spinning (MAS), triple-quantum (3Q) MAS, and double angle rotation (DOR) 17O NMR spectra were recorded at high magnetic fields (14.1 and 18.8 T). 17O MAS NMR for metal-free carboxylic acids and metal-containing carboxylic salts show featured spectra and demonstrate that this combined, where necessary, with DOR and 3QMAS, can yield site-specific information for samples containing multiple oxygen sites. In addition to 17O NMR spectroscopy, extensive quantum mechanical calculations were carried out to explore the influence of hydrogen bonding at these oxygen sites. B3LYP/6-311G++(d,p) calculations of 17O NMR parameters yielded good agreement with the experimental values. Linear correlations are observed between the calculated 17O NMR parameters and the hydrogen bond strengths, suggesting the possibility of estimating H-bonding information from 17O NMR data. The calculations also revealed intermolecular H-bond effects on the 17O NMR shielding tensors. It is found that the delta11 and delta22 components of the chemical shift tensor at O-H and C=O, respectively, are aligned nearly parallel with the strong H-bond and shift away from this direction as the H-bond interaction weakens.

Carboxylic Acids↗
PubMed2005

A stereochemically well-defined rhodium(III) catalyst for asymmetric transfer hydrogenation of ketones.

[reaction: see text] A rhodium(III) catalyst for asymmetric transfer hydrogenation of ketones has been designed. The incorporation of a tethering group between the diamino group and the cyclopentadienyl unit provides extra stereochemical rigidity. The catalyst is capable of enantioselective reduction of a range of ketones in excellent ee using formic acid/triethylamine as both the solvent and the reducing agent.

Journal Article↗
PubMed2005

A class of ruthenium(II) catalyst for asymmetric transfer hydrogenations of ketones.

Ruthenium dimer 6 (readily available in two steps from TsDPEN) is converted directly to monomeric asymmetric transfer hydrogenation catalyst 3 in situ under the conditions employed for ketone reduction. Catalyst 3 is a significantly more active catalyst for this application than the untethered derivative, exhibits higher enantioselectivities across a range of substrates, and appears to be highly stable to the reaction conditions. It is active at loadings of as low as 0.01 mol %, and reductions at the 0.1 mol % level are complete within 20 min at 80 degrees C without significant loss of enantioselectivity.

Journal Article↗
PubMed2005

Design and DNA binding of an extended triple-stranded metallo-supramolecular cylinder.

A new tetracationic triple-stranded supramolecular cylinder is prepared from a bis(pyridylimine) ligand containing a diphenylmethane and two ketimine groups in the spacer. The cylinder is longer and slightly wider than the corresponding cylinder containing just diphenylmethane spacers. Inter-strand CH...pi interactions are not observed and this affects the relay of the chiral information within the cylinder; a mixture of rac and meso isomers results, with the meso isomer being the dominant solution species and characterised in the solid state by crystallography. This new cylinder does bind to DNA as confirmed by induced circular dichroism signals in both the metal-to-ligand charge transfer (MLCT) and in-ligand bands of the cylinder. Flow linear dichroism demonstrates that the cylinder binds to DNA in a specific orientation(s) and is consistent with (major) groove-binding as seen for the shorter cylinder. Some DNA bending/coiling is observed but the effect is much less dramatic than observed for the cylinder with diphenylmethane spacers confirming that coiling is not solely a consequence of the tetracationic charge, but rather is related to the precise size and shape of the cylinder.

Benzhydryl Compounds↗
PubMed2004

Readily prepared metallo-supramolecular triple helicates designed to exhibit spin-crossover behaviour.

New dinuclear supramolecular cylinders have been designed to exhibit spin-crossover behaviour, a form of molecular bistability. This has been achieved within the framework of our imine-based approach to supramolecular architecture by switching from pyridylimine systems to imidazolimines. Spin-crossover behaviour is achieved while retaining the simplicity and ease-of-synthesis of our molecular design. The imidazole groups used also introduce additional NH groups that engage in hydrogen-bonding to anions and solvents. In the case of the iron(II) tetrafluoroborate complex this hydrogen bonding links supramolecular cylinders into an extended two-dimensional array. Consistent with this, a sharper spin-crossover transition is observed for this compound than for the corresponding hexafluorophosphate salt. More subtle anion effects are indicated in the perchlorate salt which gives a two-step spin conversion, thereby displaying tristability.

Journal Article↗
PubMed2004

Asymmetric hydrogenation of ketones using a ruthenium(II) catalyst containing BINOL-derived monodonor phosphorus-donor ligands.

[structure: see text] A series of ruthenium(II) complexes containing BINOL-based monodonor phosphorus ligands have been prepared and applied to the asymmetric catalysis of the hydrogenation of aryl/alkyl ketones. The best ligands for this application are those which contain an aromatic groups with either a methoxide or bromide on the ortho position. Using these ligands, alcohols with ee's of up to 99% are formed.

Journal Article↗
PubMed2004

A new class of "tethered" ruthenium(II) catalyst for asymmetric transfer hydrogenation reactions.

Ruthenium dimer 4 is converted directly to monomeric asymmetric transfer hydrogenation catalyst 2 under the conditions employed for ketone reduction. Using 0.25 mol % of either 4 or 0.5 mol % of 2 in formic acid/triethylamine, it is possible to achieve ketone reduction in quantitative conversion and with ee's as high as 98%. Complex 2 is a robust "single-reagent" catalyst which offers significant scope for modification toward specific substrates. The synthesis and applications of an analogous complex derived from (1R,2S)-norephedrine are also described.

Journal Article↗
PubMed2003

Mechanically linked polycarbonate.

The synthesis, by solid-state copolymerization, and characterization of the first polycatenanes based on a commercial polymer are reported. Various amounts of a benzylic amide [2]catenane, the corresponding macrocycle, and a rigid bisphenol fluorene derivative have been quantitatively and homogeneously incorporated into bisphenol A polycarbonate. The resulting copolymers were characterized by size exclusion chromatography coupled with viscosimetry, (1)H NMR, differential scanning calorimetry, and dynamic mechanical analysis. The unexpectedly small influence of [2]catenane incorporation on the glass transition temperature of the copolymers points to remarkable internal mobility of the catenane comonomer rings. A new relaxation linked to the flexible catenane units is also observed. The studies represent a detailed structural characterization of a polymer containing small amounts of mechanical linkages in its backbone and demonstrate that significant effects can be induced by doping conventional polymers with small percentages (2-6% of repeat units) of flexible catenanes.

Journal Article↗