Biomedical subjects

Gyula Vigh

Publications and source records attributed to Gyula Vigh.

At least 19 recordsLinked to original sources

PubMed2005

Non-aqueous capillary electrophoretic enantiomer separations using the tetrabutylammonium salt of heptakis(2,3-O-diacetyl-6-O-sulfo)-cyclomaltoheptaose, a single-isomer sulfated beta-cyclodextrin highly-soluble in organic solvents.

The tetrabutylammonium salt of heptakis(2,3-di-O-acetyl-6-O-sulfo)-cyclomaltoheptaose, a single-isomer sulfated beta-cyclodextrin that is adequately soluble in a number of protic and aprotic polar solvents was synthesized on the large scale and used for the capillary electrophoretic separation of the enantiomers of weak bases in acidic acetonitrile background electrolytes. The effective mobilities and separation selectivities observed for these analytes followed trends similar to those found with other single-isomer sulfated cyclodextrins in acidic methanol background electrolytes. Enantiomer separations obtained with the tetrabutylammonium and sodium salts of heptakis(2,3-di-O-acetyl-6-O-sulfo)-cyclomaltoheptaose were different indicating, for the first time, that selection of the counter ion of the single-isomer sulfated cyclodextrin is also of importance for the separation of enantiomers.

Buffers↗

PubMed2005

A family of high-buffering capacity diamino sulfate isoelectric buffers for pH-biased isoelectric trapping separations.

pH-biased isoelectric trapping separations are hindered by the lack of suitable isoelectric buffers with pI values in the 5.8 < pI range. Two generic approaches are described here for the cost-effective synthesis of a family of diamino sulfate buffers that have high buffering capacities in their isoelectric state: the first approach relies on the sulfation of existing, commercially available diamino alcohol intermediates, the second approach calls for the synthesis of diamino alcohols from epichlorohydrin and widely available secondary amines, and subsequent sulfation of the new diamino alcohol. The diamino sulfate buffers are recovered in isoelectric state, in high purity. Four members of the family having pI values in the 5.8 < pI < 8.9 range have been synthesized, analytically characterized by capillary electrophoresis (CE), electrospray ionization-time of flight-mass spectrometry (ESI-TOF-MS), 1-D and 2-D nuclear magnetic resonance (NMR) spectroscopy, and X-ray crystallography. All four diamino sulfates have been successfully used as pH biasers in the receiving stream in preparative-scale pH-biased isoelectric trapping protein separations.

Buffers↗

PubMed2005

Synthesis and characterization of quaternary ammonium dicarboxylic acid isoelectric buffers and their use in pH-biased isoelectric trapping separations.

Two approaches are described in this paper for the synthesis of isoelectric buffers that have pI values in the 1.5 < pI < 4.3 range. The first synthesis relies on the alkylation of existing aminodicarboxylic acids and recovery of the ampholyte as an inner salt. The second synthesis method forms low-pI ampholytes by reacting a secondary amine with two equivalents of an alkylester of a haloalkanecarboxylic acid, followed by hydrolysis of the intermediate in an alkaline solution and recovery of the ampholyte as an inner salt. The new ampholytes have been analytically characterized by capillary electrophoresis, high-resolution electrospray ionization-mass spectrometry, one- and two-dimensional nuclear magnetic resonance (NMR) spectroscopy, and X-ray crystallography. The isoionic solutions of the new ampholytes have high buffering capacity and conductivity, making them good pH biasers in the receiving stream in preparative-scale pH-biased isoelectric trapping separations.

Buffers↗

PubMed2005

Isoelectric buffers, part 3: determination of pKa and pI values of diamino sulfate carrier ampholytes by indirect UV-detection capillary electrophoresis.

Ampholytes with close pK(a) values (i.e., good carrier ampholytes (CAs)) are needed as buffers in pH-biased isoelectric trapping (IET) separations. The syntheses of two families of such good CAs were reported recently. Members of the family of diamino sulfate ampholytes (first series) had pI values in the 5.7 < pI < 9.0 range. Members of the family of quaternary ammonium dicarboxylic acid ampholytes (second series) had pI values in the pI < 4.3 range. To further characterize the diamino sulfate ampholytes, their effective mobilities were measured by indirect UV-absorbance detection capillary electrophoresis in a series of background electrolytes (BGEs) with different pH values. The pK(a) and limiting ionic mobility values of the CAs were obtained by fitting these mobility values, as a function of the pH and the ionic strength of the BGEs, to the theoretical mobility expression. These diamino sulfates complete the list of CAs suitable for IET separations.

Ampholyte Mixtures↗

PubMed2005

Synthesis of heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)-cyclomaltoheptaose, a single-isomer, sulfated beta-cyclodextrin carrying nonidentical substituents at all the C2, C3, and C6 positions and its use for the capillary electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes.

The sodium salt of heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose (HMAS), the first single-isomer, sulfated beta-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 24 weak base pharmaceuticals in acidic aqueous and acidic methanolic background electrolytes. HMAS interacted more strongly with most of the analytes studied than heptakis(2,3-di-O-methyl-6-O-sulfo)cyclomaltoheptaose, but less strongly than heptakis(2,3-di-O-acetyl-6-O-sulfo)cyclomaltoheptaose, the respective analogs with identical substituents at the C2 and C3 positions. The good separation selectivities and favorable normalized electroosmotic flow mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 24 weak base analytes in the aqueous and methanolic background electrolytes. The trends in the effective mobilities and separation selectivities as a function of the HMAS concentration closely followed the predictions of the ionic strength-corrected charged resolving agent migration model.

Electrolytes↗

PubMed2005

Synthesis of a single-isomer sulfated beta-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions and its use for the electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes. Part 2: Heptakis(2-O-methyl-6-O-sulfo) cyclomaltoheptaose.

The sodium salt of heptakis(2-O-methyl-6-O-sulfo)cyclomaltoheptaose (HMS), the second single-isomer, sulfated beta-CD carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 23 weak base analytes in acidic aqueous and methanolic BGEs. HMS interacted strongly with only about half of the analytes studied. The good separation selectivities and favorable normalized EOF mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 23 weak base analytes in the aqueous BGEs, often with separation selectivity values complimentary to those obtained with other single-isomer sulfated CDs. HMS did not prove to be as good a resolving agent in acidic methanolic BGEs as its counterpart, heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose.

Electrophoresis, Capillary↗

PubMed2005

Hydrolytically stable, diaminocarboxylic acid-based membranes buffering in the pH range from 6 to 8.5 for isoelectric trapping separations.

Diaminocarboxylic acid carrier ampholytes, such as L-histidine, 2,3-diaminopropionic acid, L-ornithine, and L-lysine, were reacted with glycerol-1,3-diglycidyl ether (GDGE) and poly(vinyl alcohol) (PVA) in the presence of sodium hydroxide to produce hydrolytically and mechanically stable hydrogels, supported on a PVA substrate, for use as buffering membranes in isoelectric trapping (IET) separations. The pH values of the DACAPVA membranes were determined with the help of small-molecule pI markers and proteins and were found to be in the 6 < pH < 8.5 range. The membranes were successfully used to isoelectrically trap small ampholytes, desalt ampholyte solutions in IET mode, and effect the binary separation of chicken egg white proteins.

Animals↗

PubMed2004

Use of the new, single-isomer, hexakis(2,3-diacetyl-6-O-sulfo)-alpha-cyclodextrin in acidic methanol background electrolytes for nonaqueous capillary electrophoretic enantiomer separations.

The new, single-isomer, sulfated alpha-cyclodextrin, the sodium salt of hexakis(2,3-diacetyl-6-O-sulfo)-alpha-cyclodextrin (HxDAS), was used for the first time in acidic methanol background electrolytes (BGEs) to separate the enantiomers of weak base analytes by nonaqueous capillary electrophoresis (NACE). The concentration dependence of the effective mobilities and separation selectivities followed trends similar to those observed earlier in acidic methanol background electrolytes with heptakis(2,3-diacetyl-6-O-sulfo)-beta-cyclodextrin (HDAS) and octakis(2,3-diacetyl-6-O-sulfo)-gamma-cyclodextrin (ODAS). In general, interactions between the weak base analytes and HxDAS were weaker than with HDAS and ODAS. For some of the weak base analytes, separation selectivities observed in acidic aqueous and acidic methanol background electrolytes were complementary to each other, permitting the eventual separation of enantiomers that could not be achieved otherwise.

Electrolytes↗

PubMed2004

Preparative-scale isoelectric trapping separations in methanol-water mixtures.

The typically low aqueous solubilities of small, hydrophobic organic ampholytic molecules limit the production rates that can be achieved in their isoelectric trapping (IET) separations and call for the use of hydro-organic mixtures as solvents. The compatibility of methanol-water mixtures and poly(ethylene terephthalate) substrate-supported isoelectric polyacrylamide hydrogels, developed for binary IET separations in a Gradiflow BF200IET unit, was investigated. The isoelectric polyacrylamide-based hydrogels retained their functional and mechanical integrities when the methanol concentration in the hydro-organic solvent mixture was kept at or below 25% (v/v). The utility of the hydro-organic media was demonstrated in the purification of a hydrophobic ampholytic compound, technical grade 4-hydroxy-3-(morpholinomethyl) benzoic acid. Production rates as high as 7 mg/h were achieved using small, 15 cm2 active surface area isoelectric membranes.

Isoelectric Focusing↗

PubMed2004

Preparative-scale, recirculating, pH-biased binary isoelectric trapping separations.

In order to improve the production rates and lower the specific electrophoretic energy consumption values in preparative-scale, recirculating, binary isoelectric trapping separations, we propose to add an auxiliary isoelectric agent to the solution in the anodic separation compartment and another to the solution in the cathodic separation compartment to implement pH-biased isoelectric trapping. The auxiliary isoelectric agents are selected such that they are trapped in the respective anodic and cathodic separation compartments and also, have isoelectric point (pI) values that are different from the pI values of the analytes of interest. By proper selection of the auxiliary isoelectric agents and their concentrations, the analytes of interest can be kept in nonisoelectric, charged state during the entire course of the preparative-scale, recirculating, binary isoelectric trapping separation. This results in higher electrophoretic mobilities and solubilities for the analytes than in their isoelectric or near-isoelectric states, and leads to faster binary isoelectric trapping separations.

Animals↗

PubMed2004

Alkali-stable high-pI isoelectric membranes for isoelectric trapping separations.

Alkali-stable, high-pI isoelectric membranes have been synthesized from quaternary ammonium derivatives of cyclodextrins and poly(vinyl alcohol), and bifunctional cross-linkers, such as glycerol-1,3-diglycidyl ether. The new, high-pI isoelectric membranes were successfully applied as cathodic membranes in isoelectric trapping separations in place of the hydrolytically more labile, polyacrylamide-based cathodic isoelectric membranes, and permitted the use of catholytes as alkaline as 1 M NaOH. The new high-pI isoelectric membranes have shown excellent mechanical stability, low electric resistance and long life times, even when subjected to electrophoresis with current densities as high as 80 mA/cm2.

Cross-Linking Reagents↗

PubMed2004

Single-isomer sulfated alpha-cyclodextrins for capillary electrophoresis: hexakis(2,3-di-O-methyl-6-O-sulfo)-alpha-cyclodextrin, synthesis, analytical characterization, and initial screening tests.

The third, concluding member of the family of single-isomer, fully sulfated alpha-cyclodextrins, the sodium salt of hexakis(2,3-di-O-methyl-6-O-sulfo)-alpha-cyclodextrin (HxDMS), has been synthesized on the kilogram scale, completing the nine-member array of the single-isomer, 6-O-sulfo CDs now available. HxDMS was tested for the capillary electrophoretic (CE) resolution of the enantiomers of nonelectrolyte, weak acid and weak base analytes contained in our CD screening kit. HxDMS complexed differently with many of the analytes tested than either its larger-ring analogs, heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD (HDMS) and octakis(2,3-di-O-methyl-6-O-sulfo)-gamma-CD (ODMS) or its same-ring, but differently substituted analogs, hexakis(6-O-sulfo)-alpha-CD (HxS) and hexakis(2,3-di-O-acetyl-6-O-sulfo)-alpha-CD (HxDAS). For all analytes, the effective mobilities and separation selectivities as a function of the background electrolyte concentration of HxDMS followed the trends that were found for the other single-isomer, 6-O-sulfo CDs.

Electrolytes↗

PubMed2004

Single-isomer sulfated alpha-cyclodextrins for capillary electrophoresis. Part 2. Hexakis(6-O-sulfo)-alpha-cyclodextrin: synthesis, analytical characterization, and initial screening tests.

The second member of the family of single-isomer sulfated alpha-cyclodextrins, the sodium salt of hexakis(6-O-sulfo)-alpha-cyclodextrin (HxS), has been synthesized, analytically characterized, and used as the resolving agent for the capillary electrophoretic separation of the enantiomers of nonionic, weak-acid and weak-base analytes present in our initial screening kit. HxS interacted less strongly with many of the analytes tested than the larger-ring analogs, heptakis(6-O-sulfo)-beta-cyclodextrin (HS) and octakis(6-O-sulfo)-gamma-cyclodextrin (OS). For some of the analytes, the separation selectivities obtained with HxS were complementary to those observed with hexakis(2,3-di-O-acetyl-6-O-sulfo)-alpha-cyclodextrin (HxDAS), HS, and OS. For all analytes, the effective mobilities and separation selectivities as a function of the background electrolyte concentration of HxS followed the trends that were found for HxDAS, HS, and OS.

Electrolytes↗

PubMed2004

High-buffering capacity, hydrolytically stable, low-pI isoelectric membranes for isoelectric trapping separations.

Hydrolytically stable, low-pI isoelectric membranes have been synthesized from low-pI ampholytic components, poly(vinyl alcohol), and a bifunctional cross-linker, glycerol-1,3-diglycidyl ether. The low-pI ampholytic components used contain one amino group and at least two weakly acidic functional groups. The acidic functional groups are selected such that the pI value of the ampholytic component is determined by the pK(a) values of the acidic functional groups. When the concentration of the ampholytic component incorporated into the membrane is higher than a required minimum value, the pI of the membrane becomes independent of variations in the actual incorporation rate of the ampholytic compound. The new, low-pI isoelectric membranes have been successfully used as anodic membranes in isoelectric trapping separations with pH < 1.5 anolytes and replaced the hydrolytically less stable polyacrylamide-based isoelectric membranes. The new low-pI isoelectric membranes have excellent mechanical stability, low electric resistance, good buffering capacity, and long life time, even when used with as much as 50 W power and current densities as high as 33 mA/cm(2) during the isoelectric trapping separations.

Buffers↗

PubMed2003

Electrophoretic enantiomer separations at high pH using the new, single-isomer octakis(2,3-dimethyl-6-O-sulfo)-gamma-cyclodextrin as chiral resolving agent.

The latest, single-isomer, sulfated gamma-cyclodextrin, the sodium salt of octakis(2,3-dimethyl-6-O-sulfo)-gamma-cyclodextrin that is stable in basic media was used to separate the enantiomers of neutral, weak acid and weak base analytes by capillary electrophoresis in high pH aqueous background electrolytes. The effective mobilities and separation selectivities were found to follow trends similar to those observed earlier in acidic aqueous background electrolytes. Octakis(2,3-dimethyl-6-O-sulfo)-gamma-cyclodextrin proved to interact with all three analyte types less strongly than other single-isomer sulfated cyclodextrins do under comparable conditions.

Cyclodextrins↗

PubMed2003

Preparative-scale isoelectric trapping enantiomer separations.

The new Gradiflow BF200 IET unit, developed for isoelectric trapping protein separations has been modified and used to carry out preparative-scale enantiomer separations. Hydroxypropyl beta-cyclodextrin was used as the chiral resolving agent to induce an isoelectric point difference between the enantiomers. Three isoelectric membranes with isoelectric points below, in between and above the isoelectric points of the complexed enantiomers were used to trap the separated enantiomers in the anodic and cathodic separation compartments of the Gradiflow BF200 IET apparatus, respectively. The production rates were about 15 times higher than those previously obtained with another isoelectric trapping device and about 30% higher than those obtained in a continuous free-flow electrophoretic device operated in the isoelectric focusing mode. The remarkable separation speed observed in the modified Gradiflow BF200 IET unit is attributed to the favorable interplay of the short electrophoretic transfer distance, the high electric field strength and the large effective surface areas of the isoelectric membranes.

Isoelectric Focusing↗

PubMed2003

Capillary electrophoretic separation of enantiomers in a high-pH background electrolyte by means of the single-isomer chiral resolving agent octa(6-O-sulfo)-gamma-cyclodextrin.

The new, alkali-stable, single-isomer, sulfated gamma-cyclodextrin, the sodium salt of octa(6-O-sulfo)-gamma-cyclodextrin (OS) was used for the first time to separate the enantiomers of non-ionic, acidic, basic and ampholytic analytes by capillary electrophoresis in high-pH aqueous background electrolytes. The effective mobilities and separation selectivities were found to follow trends similar to those observed earlier in acidic aqueous background electrolytes. OS proved to be a broadly applicable chiral resolving agent and afforded adequate peak resolution values with short separation times for a number of non-ionic, weak acid, weak base and ampholytic analytes.

Electrolytes↗

PubMed2003

Synthesis, analytical characterization and initial capillary electrophoretic use in acidic background electrolytes of a new, single-isomer chiral resolving agent: hexakis(2,3-di-O-acetyl-6-O-sulfo)-alpha-cyclodextrin.

The sodium salt of hexakis(2,3-di-O-acetyl-6-O-sulfo)-alpha-CD (HxDAS), the first member of the family of single-isomer, fully sulfated alpha-CDs, has been synthesized and used for the initial capillary electrophoretic separation of the enantiomers of nonionic, weak acid, weak base, and ampholytic analytes. HxDAS complexes less strongly with many of the analytes tested than the analogous beta- and gamma-cyclodextrin derivatives, namely, heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-cyclodextrin (HDAS) and octakis(2,3-di-O-acetyl-6-O-sulfo)-gamma-cyclodextrin (ODAS). Nevertheless, it facilitated the separation of the enantiomers of a large number of weak electrolyte and nonelectrolyte analytes in acidic aqueous background electrolytes. For all analytes, the effective mobilities and separation selectivities as a function of the background electrolyte concentration of HxDAS followed the trends that were found for HDAS and ODAS.

Cyclodextrins↗