PubMed Health⌕ Search

Biomedical subjects

H Beinert

Publications and source records attributed to H Beinert.

At least 55 records · Page 3Linked to original sources
PubMed1990

Characterization of the [4Fe-4S]+ cluster at the active site of aconitase by 57Fe, 33S, and 14N electron nuclear double resonance spectroscopy.

57Fe, 33S, and 14N electron nuclear double resonance (ENDOR) studies have been performed to characterize the [4Fe-4S]+ cluster at the active site of aconitase. Q-band 57Fe ENDOLR of isotopically enriched enzyme, both substrate free and in the enzyme-substrate complex, reveals four inequivalent iron sites. In agreement with Mössbauer studies [Kent et al. (1985) J. Biol. Chem. 260, 6371-6881], one of the iron ions, Fea, which is easily removed by oxidation to yield the [3Fe-4S]+ cluster of inactive aconitase, shows a dramatic change in the presence of substrate. The remaining iron sites, Feb1,2,3, show minor changes when substrate is bound. Methods devised by us for analyzing and simulating ENDOR spectra of a randomly oriented paramagnet have been used to determine the principal values and orientation relative to the g tensor for the hyperfine tensors of three of the four inequivalent iron sites of the [4Fe-4S]+ cluster, Fea, Feb2, and Feb3, in the substrate-free enzyme and the enzyme-substrate complex. The full tensor for the fourth site, Feb1, could not be obtained because its signal is seen only over a limited range of the EPR envelope. 33S ENDOR data for the enzyme-substrate complex using enzyme reconstituted with 33S show that the four inorganic bridging sulfide ions of the [4Fe-4S]+ cube have isotropic hyperfine couplings of A(S) less than 12 MHz, and analysis indicates that they can be divided into two pairs, one with couplings of A(S1) approximately less than 1 MHz and the other with A(S2) approximately 6-12 MHz; the analysis further places these pairs within the cube relative to the iron sites. 33S data for substrate-free enzyme is qualitatively similar and can be completely simulated by two types of S2- ion, with A(S1) approximately 7.5 and A(S2) approximately 9 MHz; the full hyperfine tensors have been determined. The hyperfine values for the two enzyme forms correspond to surprisingly small unpaired spin density on S2-. 14N ENDOR at Q-band reveals a nitrogen signal that does not change upon substrate binding.

Aconitate Hydratase↗
PubMed1990

Recent developments in the field of iron-sulfur proteins.

This review considers recent information, in the following order, on complex proteins containing Fe-S clusters together with other prosthetic groups, on hydrogenases, unexpected functions of Fe-S clusters, novel cluster types, protein structures furnishing the cluster ligands, evolutionary aspects, and spectroscopic methods and theoretical approaches used or developed in the study of Fe-S proteins.

Amino Acid Sequence↗
PubMed1989

19th Sir Hans Krebs lecture. Engineering of protein bound iron-sulfur clusters. A tool for the study of protein and cluster chemistry and mechanism of iron-sulfur enzymes.

An increasing number of iron-sulfur (Fe-S) proteins are found in which the Fe-S cluster is not involved in net electron transfer, as it is in the majority of Fe-S proteins. Most of the former are (de)hydratases, of which the most extensively studied is aconitase. Approaches are described and discussed by which the Fe-S cluster of this enzyme could be brought into states of different structure, ligation, oxidation and isotope composition. The species, so obtained, provided the basis for spectroscopic and chemical investigations. Results from studies by protein chemistry, EPR, Mössbauer, 1H, 2H and 57Fe electron-nuclear double resonance spectroscopy are described. Conclusions, which bear on the electronic structure of the Fe-S cluster, enzyme-substrate interaction and the enzymatic mechanism, were derived from a synopsis of the recent work described here and of previous contributions from several laboratories. These conclusions are discussed and summarized in a final section.

Aconitate Hydratase↗
PubMed1989

Cysteine labeling studies of beef heart aconitase containing a 4Fe, a cubane 3Fe, or a linear 3Fe cluster.

The reactivity of cysteines following cluster destruction by iron chelation was investigated for [4Fe-4S]2+ and cubane [3Fe-4S]+ beef heart aconitase. When the chelator orthobathophenanthroline disulfonate was used, the formation of sulfur-sulfur bonds and the retention of inorganic sulfur from the cluster was observed. For both the 4Fe and 3Fe forms of aconitase, the two cysteines in peptide 7, the cysteine in peptide 3, and the cysteine in peptide 2 were found as the primary constituents of sulfur-sulfur bonds (the peptide sequences and nomenclature are from Plank, D. W., and Howard, J. B. (1988) J. Biol. Chem. 263, 8184-8189). Three of these four cysteines (peptides 3 and 7) correlated with those proposed to be cluster ligands recently determined by x-ray crystallography (Robbins, A. H. and Stout, C. D. (1989) Proteins, in press; Robbins, A. H., and Stout, C. D.,, (1989) Proc. Natl. Acad. Sci. U. S. A. 86, 3639-3643) for pig heart aconitase. A mechanism is proposed whereby the greater affinity of orthobathophenanthroline disulfonate for Fe2+ relative to Fe3+ shifts the equilibrium toward reduction of ferric iron through sulfur-sulfur bond formation at the cluster site. Aconitase which has been oxidized with ferricyanide and from which the cluster iron has been removed by EDTA has been shown to have two di- or polysulfides (Kennedy, M. C., and Beinert, H. (1988) J. Biol. Chem. 263, 8194-8198). The cysteines found in the sulfur-sulfur bonds generated by this treatment also were predominantly those from peptides 3 and 7. In addition, the putative thiol ligands for the linear [3Fe-4S]+ cluster of aconitase are reported. The four cysteines of peptides 7 and 9 (two in each peptide) were found to be protected by the cluster from alkylation when the protein was denatured. The difference in the ligands between the cubane and linear forms indicates that a specific thiol exchange occurs during the conversion.

Aconitate Hydratase↗
PubMed1989

Mössbauer study of the inactive Fe3S4 and Fe3Se4 and the active Fe4Se4 forms of beef heart aconitase.

Active beef heart aconitase contains an iron-sulfur cluster with an [Fe4S4]2+ core. This cluster can be converted into Fe3S4 with concomitant loss of enzymatic activity. We have reconstituted apo-aconitase with iron and selenide to obtain Fe4Se4 aconitase. The Se analog has higher catalytic activity than the native S-containing enzyme when isocitrate is the substrate. Oxidation of [Fe4Se4]2+ with ferricyanide yields the inactive [Fe3Se4]1+ form. The Se-containing 3-Fe cluster can be reduced to [Fe3Se4]0. We have studied the [Fe3S4]1+,0, [Fe3Se4]1+,0, and [Fe4Se4]2+ states with Mössbauer spectroscopy from 1.3 K to 200 K in magnetic fields up to 6.0 T. The spectra of the S- and Se-containing enzymes were found to be remarkably similar. The spectra of the 3-Fe clusters were analyzed and the salient features of the electronic structure are discussed.

Aconitate Hydratase↗
PubMed1988

Heterogeneity in an isolated membrane protein. Has the 'authentic cytochrome oxidase' been identified?

The criteria of homogeneity or native state of a protein are prone to become ambiguous when applied to membrane proteins, such as cytochrome-c oxidase, which are purified by extraction with detergents. Properties of the purified material depend on the detergent used and on details of the purification protocol followed with any single batch of a preparation. We present arguments to show that the evidence presently available in published form does not justify the designation [(1987) J. Biol. Chem. 262, 3160-3164] of one type of preparation as being closer to the native state than others.

Cell Membrane↗
PubMed1988

The active site sulfhydryl of aconitase is not required for catalytic activity.

Previous reports have demonstrated that aconitase has a single reactive sulfhydryl at or near the active site (Johnson, P. G., Waheed, A., Jones, L., Glaid, A. J., and Gawron, O. (1977) Biochem. Biophys. Res. Commun. 74, 384-389). On the basis of experiments with phenacyl bromide in which enzyme activity was abolished while substrate afforded protection, it was concluded that this group was an essential sulfhydryl. We have further examined the reactivity of this group and confirmed the result that, when reagents with bulky groups (e.g. N-ethylmaleimide or phenacyl bromide) modify the protein at the reactive sulfhydryl, activity is lost. However, when smaller groups, e.g. the SCH3 from methylmethanethiosulfonate or the CH2CONH2 from iodoacetamide, are introduced, there is only partial (50%) or no loss of activity. Experiments were performed to obtain evidence that these reagents are modifying the same residue. Methylmethanethio-sulfonate-treated enzyme showed an increase in the Km for citrate from 200 to 330 microM. EPR spectra were taken of the reduced N-ethylmaleimide- and iodoacetamide-modified enzyme in the presence of substrate. The former gave a spectrum typical of the substrate-free enzyme, while the spectrum of the latter was identical to enzyme with bound substrate. We, therefore, conclude that modification of this sulfhydryl affects activity by interfering with the binding of substrate to the active site and is not essential in the catalytic process.

Acetophenones↗
PubMed1988

The state of cluster SH and S2- of aconitase during cluster interconversions and removal. A convenient preparation of apoenzyme.

During the interconversion of the various cluster types observed in aconitase ([4Fe-4S]1+,2+, [3Fe-4S]0,1+, cubane, or linear types) and production of apoenzyme, changes int he state of the sulfur ligands (RSH and S2-) are bound to occur. We have attempted to obtain information on such changes by interception of SH groups and/or by analysis of the resulting cluster or apoprotein for various forms of sulfur and enzymatic activity. During cluster interconversions no evidence was obtained for changes in SH titer that could be associated with cluster ligands. We conclude from this that the ligand exchange at the cluster is too rapid to allow trapping even by SH reagents of low Mr. The possibility that released SH becomes buried in the protein structure and unreactive cannot be entirely discounted. On formation of the apoenzyme by oxidation with ferricyanide, four SH groups per molecule became unavailable for reaction with 5,5'-dithiobis(2-nitrobenzoic acid); instead, while the holoenzyme contains no disulfides or S(0), two di- or polysulfides were found in the apoenzyme indicating that, on an average, four SH groups and three of the original four S(2-) ligands are trapped as RS-Sx-SR. In agreement with this conclusion is the fact that the apoenzyme can be reconstituted without addition of S(2-). A convenient preparative procedure for reconstitutable apoenzyme in 75% yield is [3Fe-4S] and [4Fe-4S] clusters with a variety of combinations of iron and sulfur isotopes as required for Mössbauer, resonance Raman, and electron nuclear double resonance studies.

Aconitate Hydratase↗
PubMed1987

Mode of substrate carboxyl binding to the [4Fe-4S]+ cluster of reduced aconitase as studied by 17O and 13C electron-nuclear double resonance spectroscopy.

The active form of aconitase has a diamagnetic [4Fe-4S]2+ cluster. A specific iron ion (Fea, which is lost during inactivation) is the binding site for substrate, as shown by Mössbauer spectroscopy. We have studied the mode of substrate and analogue binding at equilibrium to the paramagnetic [4Fe-4S]+ cluster of the reduced active form by 17O and 13C electron-nuclear double resonance spectroscopy with specifically labeled substrates. The data show that with substrate, only the carboxyl at C-2 of the propane backbone is strongly bound in addition to H2O or OH- (HxO) from the solvent, whereas in an isocitrate analogue that has a nitro group at C-2, the carboxyl and hydroxyl at C-1 are bound along with solvent HxO. We conclude from these data that, on addition of any one of the three substrates, cis-aconitate is the predominant species bound to Fea of the cluster along with solvent HxO and that cis-aconitate is bound in the citrate mode (carboxyl at C-2). The results with the nitro analogue show that the enzyme can also bind a substrate-like ligand to the cluster in the alternative isocitrate mode (carboxyl at C-1), as is implicit in models proposed for the aconitase reaction.

Aconitate Hydratase↗
PubMed1986

17O electron nuclear double resonance characterization of substrate binding to the [4Fe-4S]1+ cluster of reduced active aconitase.

To characterize the binding of substrate to aconitase, we have made 17O electron nuclear double resonance (ENDOR) measurements on reduced active ([4Fe-4S]1+) beef heart aconitase, both in H216O and H217O, in the presence of substrate and the inhibitors, tricarballylate, trans-aconitate, and 1-hydroxy-2-nitro-1, 3-propanedicarboxylate, referred to here as nitroisocitrate; the hydroxyl of the latter also was isotypically labeled with 17O. The hydroxyl oxygen of citrate and isocitrate is exchanged with solvent water by aconitase, but the hydroxyl of nitroisocitrate is not. Thus, the isotopic composition of nitroisocitrate can be chemically controlled, allowing direct identification of any 17O ENDOR signal associated with it. 17O ENDOR signals were observed from Hx17O (mean = 1 or 2) bound to the [4Fe-4S]1+ cluster in samples prepared with trans-aconitate and unlabeled nitroisocitrate. 17O-Labeled nitroisocitrate in H216O bound to the cluster showed a signal from the 17OH group; in H217O it showed 17O ENDOR resonances due to both Hx17O and 17OH of substrate. This result demonstrates that the cluster participates in substrate binding and can simultaneously coordinate the hydroxyl of a substrate (or analogue) and water (or hydroxyl). The sample with citrate in H217O showed only the Hx17O signal, although aconitase exchanges the hydroxyl of substrate with solvent water. The mechanism of action of aconitase is discussed in light of this observation. Comparison shows the ENDOR study to be in agreement with previous Mössbauer and EPR spectroscopic results.

Aconitate Hydratase↗
PubMed1986

Studies on the spin-spin interaction between flavin and iron-sulfur cluster in an iron-sulfur flavoprotein.

When the di- or trimethylamine dehydrogenases (trimethylamine:(acceptor) oxidoreductase (demethylating), EC 1.5.99.7) of certain methylotrophic bacteria are reduced by two electrons with substrate unusual EPR signals arise at g = 2 and g = 4 (Steenkamp, D.J. and Beinert, H. (1982) Biochem. J. 207, 233-239; 241-252) indicative of spin-spin interaction between the FMN and iron-sulfur compounds of these enzymes. An attempt is made to understand, describe and simulate these spectra in terms of a triplet state with possible contributions from both dipolar and anisotropic exchange (J) interactions. No direct measurement of J is available, but various approaches to setting limits to J are outlined. According to these, J approximately 0.4 to 3 cm-1 or 15 to 50 cm-1. The spectra show, in the g = 2 region, a pair of rather sharp inner and a pair of broad outer lines; the latter broaden as well as move out from the center with increasing time (after substrate addition) and substrate concentration, while there is little change of g = 4. The best fits to such spectra were obtained by assuming distribution of D and E values, depending on substrate effects and arriving presumably from 'g-strain'. The fact that both shapes and intensities at g = 2 and g = 4 could be reproduced simultaneously at two frequencies indicates that the assumptions underlying our approaches and interpretations are permissible and reasonable, although we cannot claim their uniqueness. The distance between the centers of the spin densities of the flavin radical and the Fe-S cluster is thought to lie between the limits 3 to 5 A if the asymmetries in the spin-spin interaction are magnetic dipole-dipole in origin. Because there is an indication that the interaction is anisotropic exchange, the upper limit is less stringent.

Bacteria↗
PubMed1985

Mössbauer studies of aconitase. Substrate and inhibitor binding, reaction intermediates, and hyperfine interactions of reduced 3Fe and 4Fe clusters.

Active beef heart aconitase contains a [4Fe-4S] cluster. One iron of the cluster, Fea, is labile and can be removed easily by oxidation in air to yield the [3Fe-4S]1+ cluster of inactive aconitase. We have previously shown that substrate binds to Fea. We have continued our Mössbauer studies by further investigating the active and inactive forms of the enzyme. When active aconitase, [4Fe-4S]2+, is mixed with substrate, two species (substrates or intermediates bound to Fea) labeled S1 and S2 are obtained. With the nitroanalogs of citrate and isocitrate, thought to be transition state analogs, and fluorocitrate, species S2, but not S1, is observed, suggesting that S2 represents a carbanion transition state complex. We have prepared Mössbauer samples by rapid mix/rapid freeze techniques. Using either citrate, isocitrate or cis-aconitate, the natural substrates, we have been able to detect at 0 degree C reaction intermediates in the 5-35 ms time range and, studying enzyme substrate interactions at subzero temperatures in a water/methanol/ethylene glycol solvent, we have observed new species when substrates were added at -60 degrees C. Details of these experiments are given, although in neither case can unique interpretations be offered at this time. We have also investigated reduced active aconitase ([4Fe-4S]1+; EPR at g = 1.94) in the presence of substrate with material selectively enriched with 57Fe in either Fea or the other three cluster sites. The spectra were analyzed with a spin Hamiltonian, and the results are discussed and interpreted in terms of three inequivalent Fe sites in the cluster. Finally, we have studied enzyme containing the reduced [3Fe-4S]0 cluster. There is no indication that citrate binds to the 3Fe cluster, and since no significant activity was observed, we conclude that aconitase containing a 3Fe cluster is not active in either oxidation state.

Aconitate Hydratase↗
PubMed1984

Evidence for the formation of a linear [3Fe-4S] cluster in partially unfolded aconitase.

Beef heart aconitase, as isolated under aerobic conditions, is inactive and contains a [3Fe-4S]1+ cluster. On incubation at pH greater than 9.5 (or treatment with 4-8 M urea) the color of the protein changes from brown to purple. This purple form is stable and can be converted back in good yield to the active [4Fe-4S]2+ form by reduction in the presence of iron. Active aconitase is converted to the purple form at alkaline pH only after oxidative inactivation. The Fe/S2- ratio of purple aconitase is 0.8, indicating the presence of [3Fe-4S] clusters. The number of SH groups readily reacting with 5,5'-dithiobis(2-nitrobenzoic acid) is increased from approximately 1 in the enzyme as isolated to 7-8 in the purple form, indicating a partial unfolding of the protein. On conversion of inactive aconitase to the purple form, the EPR signal at g = 2.01 (S = 1/2) is replaced by signals at g = 4.3 and 9.6 (S = 5/2). Mössbauer spectroscopy shows that purple aconitase has high-spin ferric ions, each residing in a tetrahedral environment of sulfur atoms. The three iron sites are exchange-coupled to yield a ground state with S = 5/2. Analysis of the data within a spin coupling model shows that J13 congruent to J23 and 2 J12 less than J13, where the Jik describe the antiferromagnetic (J greater than 0) exchange interactions among the three iron pairs. Comparison of our data with those reported for synthetic Fe-S clusters (Hagen, K. S., Watson, A. D., and Holm, R. H., (1983) J. Am. Chem. Soc. 105, 3905-3913) shows that purple aconitase contains a linear [3Fe-4S]1+ cluster, a structural isomer of the S = 1/2 cluster of inactive aconitase. Our studies also show that protein-bound [2Fe-2S] clusters can be generated under conditions where partial unfolding of the protein occurs.

Aconitate Hydratase↗