PubMed Health⌕ Search

Biomedical subjects

H Bussey

Publications and source records attributed to H Bussey.

At least 73 records · Page 4Linked to original sources

A mutational analysis of killer toxin resistance in Saccharomyces cerevisiae identifies new genes involved in cell wall (1-->6)-beta-glucan synthesis.

Recessive mutations leading to killer resistance identify the KRE9, KRE10 and KRE11 genes. Mutations in both the KRE9 and KRE11 genes lead to reduced levels of (1-->6)-beta-glucan in the yeast cell wall. The KRE11 gene encodes a putative 63-kD cytoplasmic protein, and disruption of the KRE11 locus leads to a 50% reduced level of cell wall (1-->6)-glucan. Structural analysis of the (1-->6)-beta-glucan remaining in a kre11 mutant indicates a polymer smaller in size than wild type, but containing a similar proportion of (1-->6)- and (1-->3)-linkages. Genetic interactions among cells harboring mutations at the KRE11, KRE6 and KRE1 loci indicate lethality of kre11 kre6 double mutants and that kre11 is epistatic to kre1, with both gene products required to produce the mature glucan polymer at wild-type levels. Analysis of these KRE genes should extend knowledge of the beta-glucan biosynthetic pathway, and of cell wall synthesis in yeast.

Alleles↗

SKN7, a yeast multicopy suppressor of a mutation affecting cell wall beta-glucan assembly, encodes a product with domains homologous to prokaryotic two-component regulators and to heat shock transcription factors.

A search for genes which, at elevated copy number, could suppress the growth defect in a strain disrupted at the KRE9 locus has identified the SKN7 gene. SKN7 was mapped to the right arm of chromosome VIII and is predicted to encode a 70-kDa protein, Skn7p, with a region of homology to the DNA binding domain of the Saccharomyces cerevisiae heat shock transcription factor, Hsf1p. Skn7p also has a domain which shows similarity to the prokaryotic receiver modules found on an extensive family of two-component response regulators, including the products of the rcsC and barA genes. SKN7 did not suppress other mutations in the (1-->6)-beta-glucan biosynthetic pathway, suggesting that SKN7 does not act as a general bypass suppressor of this glucan.

Amino Acid Sequence↗

The yeast KRE9 gene encodes an O glycoprotein involved in cell surface beta-glucan assembly.

The yeast KRE9 gene encodes a 30-kDa secretory pathway protein involved in the synthesis of cell wall (1-->6)-beta-glucan. Disruption of KRE9 leads to serious growth impairment and an altered cell wall containing less than 20% of the wild-type amount of (1-->6)-beta-glucan. Analysis of the glucan material remaining in a kre9 delta null mutant indicated a polymer with a reduced average molecular mass. kre9 delta null mutants also displayed several additional cell-wall-related phenotypes, including an aberrant multiply budded morphology, a mating defect, and a failure to form projections in the presence of alpha-factor. Double mutants were generated by crossing kre9 delta strains with strains harboring a null mutation in the KRE1, KRE6, or KRE11 gene, and each of these double mutants was found to be inviable in the SEY6210 background. Similar crosses with null mutations in the KRE5 and SKN1 genes indicated that these double mutants were no more severely affected than kre5 delta or kre9 delta single mutants alone. Antibodies were generated against Kre9p and detected an O glycoprotein of approximately 55 to 60 kDa found in the extracellular medium of a strain overproducing Kre9p.

Amino Acid Sequence↗

SKN1 and KRE6 define a pair of functional homologs encoding putative membrane proteins involved in beta-glucan synthesis.

KRE6 encodes a predicted type II membrane protein which, when disrupted, results in a slowly growing, killer toxin-resistant mutant possessing half the normal level of a structurally wild-type cell wall (1-->6)-beta-glucan (T. Roemer and H. Bussey, Proc. Natl. Acad. Sci. USA 88:11295-11299, 1991). The mutant phenotype and structure of the KRE6 gene product, Kre6p, suggest that it may be a beta-glucan synthase component, implying that (1-->6)-beta-glucan synthesis in Saccharomyces cerevisiae is functionally redundant. To examine this possibility, we screened a multicopy genomic library for suppression of both the slow-growth and killer resistance phenotypes of a kre6 mutant and identified SKN1, which encodes a protein sharing 66% overall identity to Kre6p. SKN1 suppresses kre6 null alleles in a dose-dependent manner, though disruption of the SKN1 locus has no effect on killer sensitivity, growth, or (1-->6)-beta-glucan levels. skn1 kre6 double disruptants, however, showed a dramatic reduction in both (1-->6)-beta-glucan levels and growth rate compared with either single disruptant. Moreover, the residual (1-->6)-beta-glucan polymer in skn1 kre6 double mutants is smaller in size and altered in structure. Since single disruptions of these genes lead to structurally wild-type (1-->6)-beta-glucan polymers, Kre6p and Skn1p appear to function independently, possibly in parallel, in (1-->6)-beta-glucan biosynthesis.

Amino Acid Sequence↗

Identification of a Saccharomyces cerevisiae homolog of the SNF2 transcriptional regulator in the DNA sequence of an 8.6 kb region in the LTE1-CYS1 interval on the left arm of chromosome I.

The DNA sequence of an 8.6 kb region of the left arm of chromosome I has been determined. This region, between the LTE1 and CYS1 loci, is approximately 40 kb from the centromere. There are six potential open-reading frames (ORFs), provisionally named YAL001-006 within this fragment of chromosome I. Four of these ORFs can be aligned with previously identified FUN transcripts: FUN28 with YAL006, FUN29 with YAL004, FUN30 with YAL001 and FUN31 with YAL002. The YAL001 ORF shows significant homology to the SNF2 transcriptional regulator. A region of the DNA contains an extensive repeat of the bases C-A-T positioned in the 5' terminus of the YAL004 promoter region.

Adenosine Triphosphatases↗

Yeast Kex1p is a Golgi-associated membrane protein: deletions in a cytoplasmic targeting domain result in mislocalization to the vacuolar membrane.

We have investigated the localization of Kex1p, a type I transmembrane carboxypeptidase involved in precursor processing within the yeast secretory pathway. Indirect immunofluorescence demonstrated the presence of Kex1p in a punctate organelle resembling the yeast Golgi apparatus as identified by Kex2p and Sec7p (Franzusoff, A., K. Redding, J. Crosby, R. S. Fuller, and R. Schekman. 1991. J. Cell Biol. 112:27-37). Glycosylation studies of Kex1p were consistent with a Golgi location, as Kex1p was progressively N-glycosylated in an MNN1-dependent manner. To address the basis of Kex1p targeting to the Golgi apparatus, we examined the cellular location of a series of carboxy-terminal truncations of the protein. The results indicate that a cytoplasmically exposed carboxy-terminal domain is required for retention of this membrane protein within the Golgi apparatus. Deletions of the retention region or overproduction of wild-type Kex1p led to mislocalization of Kex1p to the vacuolar membrane. This unexpected finding is discussed in terms of models involving either the vacuole as a default destination for membrane proteins, or by endocytosis to the vacuole following their default localization to the plasma membrane.

Amino Acid Sequence↗

Yeast KRE2 defines a new gene family encoding probable secretory proteins, and is required for the correct N-glycosylation of proteins.

We have cloned, sequenced and disrupted the KRE2 gene of Saccharomyces cerevisiae, identified by killer-resistant mutants with a defective cell wall receptor for the toxin. The KRE2 gene is close to PHO8 on chromosome 4, and encodes a predicted 49-kD protein, Kre2p, that probably enters the secretory pathway. Haploid cells carrying a disruption of the KRE2 locus grow more slowly than wild-type cells at 30 degrees, and fail to grow at 37 degrees. At 30 degrees, kre2 mutants showed altered N-linked glycosylation of proteins, as the average size of N-linked outer chains was reduced. We identified two other genes, YUR1 on chromosome 10, and KTR1 on chromosome 15, whose predicted products share 36% identity with Kre2p over more than 300 amino acid residues. Yur1p has an N-terminal signal sequence like Kre2p, while Ktr1p has a predicted topology consistent with a type 2 membrane protein. In all cases the conserved regions of these proteins appear to be on the lumenal side of secretory compartments, suggesting related function. KRE2, KTR1 and YUR1 define a new yeast gene family.

Amino Acid Sequence↗

Yeast beta-glucan synthesis: KRE6 encodes a predicted type II membrane protein required for glucan synthesis in vivo and for glucan synthase activity in vitro.

The KRE6 gene product is required for synthesis of the major beta-glucans of the yeast cell wall, as mutations in this gene confer reduced levels of both the (1----6)- and (1----3)-beta-D-glucan polymers. Cloning and sequencing of KRE6 reveals a gene encoding a predicted 80-kDa protein with a central transmembrane domain and the topology of a type II membrane protein. Null mutants of KRE6 grow slowly, have larger cells, and show a reduction in alkali-insoluble wall glucans. The mutants show good viability and are not osmotically sensitive, but they are more susceptible to beta-glucanase digestion and mechanical stress than wild-type cells. The specific activity of the GTP-dependent, membrane-associated, in vitro (1----3)-beta-glucan synthase is reduced 50% in kre6 null mutants, and this reduction correlates with the mutation in meiotic tetrads. Transformants of kre6 null mutants with a KRE6 gene expressed from a centomere-based vector show a 4- to 5-fold increase in in vitro (1----3)-beta-glucan synthase activity over transformants with the vector alone. The phenotype and structure of the KRE6 product, Kre6p, suggest that Kre6p may be a beta-glucan synthase, and if so, it implies that beta-glucan synthases are functionally redundant in yeast. Alternatively, Kre6p may be part of a single multiprotein glucan synthase or modulate its activity. Use of KRE6 should permit a genetic analysis of eukaryotic (1----3)-beta-glucan synthesis.

Alleles↗

K1 killer toxin, a pore-forming protein from yeast.

K1 killer toxin is a secreted, pore-forming protein that kills sensitive yeast cells. The heterodimeric toxin is processed from a precursor in the Golgi, and has allowed identification of the KEX2- and KEX1-encoded proteases. The toxin binds to a glucan receptor on the cell wall of target yeast, and mutational analysis implicates both the alpha- and beta-toxin subunits in receptor binding. Toxin-resistant mutants with altered cell-wall glucans have helped to outline a pathway of assembly of these polysaccharides. Patch-clamp technology has demonstrated the nature of the lethal channel in toxin-treated plasma membranes. The hydrophobic alpha-subunit-encoding region is the site of all mutations affecting channel formation. Immunity to the toxin is conferred by the toxin precursor, and immunity mutations map to the region encoding the alpha subunit. The precursor probably competes with the toxin to prevent channel formation in toxin-producing cells, but the basis of this remains unknown. This toxin/immunity system has a domain structure that differs from that of other characterized toxins and has no known homologues.

Fungal Proteins↗

Isolation from Candida albicans of a functional homolog of the Saccharomyces cerevisiae KRE1 gene, which is involved in cell wall beta-glucan synthesis.

The KRE1 gene of Saccharomyces cerevisiae, sacKRE1, appears to be involved in the synthesis of cell wall beta-glucan. S. cerevisiae strains with mutations in the KRE1 gene produce a structurally altered cell wall (1----6)-beta-glucan, which results in resistance to K1 killer toxin. We isolated the canKRE1 gene from Candida albicans by its ability to complement a kre1 mutation in S. cerevisiae and confer sensitivity to killer toxin. Sequence analysis revealed that the predicted protein encoded by canKRE1 shares an overall structural similarity with that encoded by sacKRE1. The canKRE1 protein is composed of an N-terminal signal sequence, a central domain of 46% identity with the sacKRE1 protein, and a C-terminal hydrophobic tract. These structural and functional similarities imply that the canKRE1 gene carries out a function in C. albicans cell wall assembly similar to that observed for sacKRE1 in S. cerevisiae.

Amino Acid Sequence↗

Mutational analysis of the functional domains of yeast K1 killer toxin.

To determine the functional domains of K1 killer toxin, we analyzed the phenotypes of a set of mutations throughout regions encoding the alpha- and beta-toxin subunits that allow secretion of mutant toxins. A range of techniques have been used to examine the ability of mutant toxins to bind to beta-glucan cell wall receptor and to form lethal ion channels. Our results indicate that both the alpha and beta subunits are involved in beta-glucan receptor binding. Defects in ion channel formation and toxin immunity are confined to the hydrophobic alpha subunit of the toxin.

Base Sequence↗

Yeast KEX1 protease cleaves a prohormone processing intermediate in mammalian cells.

A vaccinia virus vector was used to express the yeast KEX1 gene, which encodes a prohormone carboxypeptidase specific for the removal of basic amino acids from prohormone processing intermediates, in mammalian cells. When produced in BSC-40 cells, Kex1p was localized to the perinuclear region and conferred a large increase in enzymatic activity characteristic of this carboxypeptidase. Expression of the KEX1 gene together with the yeast KEX2 gene, which encodes a prohormone endopeptidase specific for cleavage at pairs of basic amino acids, and the mouse proopiomelanocortin (mPOMC) cDNA in BSC-40 cells resulted in the full conversion of mPOMC to mature peptides including gamma-lipotropin. This in vivo processing of mPOMC to mature peptides by the KEX2/KEX1 gene products demonstrates a significant functional homology of the basic prohormone processing machinery in yeast and neuroendocrine cells.

Animals↗

Genetic and molecular approaches to synthesis and action of the yeast killer toxin.

The K1 killer toxin of Saccharomyces cerevisiae is a secreted, virally-coded protein lethal to sensitive yeasts. Killer yeasts are immune to the toxin they produce. This killer system has been extensively examined from genetic and molecular perspectives. Here we review the biology of killer yeasts, and examine the synthesis and action of the protein toxin and the immunity component. We summarise the structure of the toxin precursor gene and its protein products, outline the proteolytic processing of the toxin subunits from the precursor, and their passage through the yeast secretory pathway. We then discuss the mode of action of the toxin, its lectin-like interaction with a cell wall glucan, and its probable role in forming channels in the yeast plasma membrane. In addition we describe models of how a toxin precursor species functions as the immunity component, probably by interfering with channel formation. We conclude with a review of the functional domains of the toxin structural gene as determined by site-directed mutagenesis. This work has identified regions associated with glucan binding, toxin activity, and immunity.

Cell Membrane↗

Yeast K1 killer toxin forms ion channels in sensitive yeast spheroplasts and in artificial liposomes.

The patch-clamp technique was used to examine the plasma membranes of sensitive yeast spheroplasts exposed to partially purified killer toxin preparations. Asolectin liposomes in which the toxin was incorporated were also examined. Excised inside-out patches from these preparations often revealed at 118 pS conductance appearing in pairs. The current through this conductance flickered rapidly among three states: dwelling mostly at the unit-open state, less frequently at the two-unit-open state, and more rarely at the closed state. Membrane voltages from -80 to 80 mV had little influence on the opening probability. The current reversed near the equilibrium potential of K+ in asymmetric KCl solutions and also reversed near O mV at symmetric NaCl vs. KCl solutions. The two levels of the conductance were likely due to the toxin protein, as treatment of spheroplasts or liposomes with extracellular protein preparations from isogenic yeasts deleted for the toxin gene gave no such conductance levels. These results show that in vivo the killer-toxin fraction can form a cation channel that seldom closes regardless of membrane voltage. We suggest that this channel causes the death of sensitive yeast cells.

Cell Membrane↗

Yeast KRE genes provide evidence for a pathway of cell wall beta-glucan assembly.

The Saccharomyces cerevisiae KRE1 gene encodes a Ser/Thr-rich protein, that is directed into the yeast secretory pathway, where it is highly modified, probably through addition of O-linked mannose residues. Gene disruption of the KRE1 locus leads to a 40% reduced level of cell wall (1----6)-beta-glucan. Structural analysis of the (1----6)-beta-glucan fraction, isolated from a strain with a krel disruption mutation, showed that it had an altered structure with a smaller average polymer size. Mutations in two other loci, KRE5 and KRE6 also lead to a defect in cell wall (1----6)-beta-glucan production and appear to be epistatic to KRE1. These findings outline a possible pathway of assembly of yeast cell wall (1----6)-beta-glucan.

Amino Acid Sequence↗

The yeast KRE5 gene encodes a probable endoplasmic reticulum protein required for (1----6)-beta-D-glucan synthesis and normal cell growth.

Yeast kre mutants define a pathway of cell wall (1----6)-beta-D-glucan synthesis, and mutants in genes KRE5 and KRE6 appear to interact early in such a pathway. We have cloned KRE5, and the sequence predicts the product to be a large, hydrophilic, secretory glycoprotein which contains the COOH-terminal endoplasmic reticulum retention signal, HDEL. Deletion of the KRE5 gene resulted in cells with aberrant morphology and extremely compromised growth. Suppressors to the KRE5 deletions arose at a frequency of 1 in 10(7) to 1 in 10(8) and permitted an analysis of deletions which were found to contain no alkali-insoluble (1----6)-beta-D-glucan. These results indicate a role for (1----6)-beta-D-glucan in normal cell growth and suggest a model for sequential assembly of (1----6)-beta-D-glucan in the yeast secretory pathway.

Amino Acid Sequence↗

Characterization of the yeast KEX1 gene product: a carboxypeptidase involved in processing secreted precursor proteins.

We have identified and partially characterized the Saccharomyces cerevisiae KEX1 gene product, Kex1p, to assess its role in processing secreted protein precursors. Anti-Kex1p antibodies identified a 113-kilodalton protein that was absent in cells in which the KEX1 gene has been disrupted and that was more abundant in cells overexpressing the KEX1 gene. Kex1p was found to be a membrane-associated glycoprotein with N-linked carbohydrate. The N-linked oligosaccharide(s) was modified in a progressive manner after synthesis, causing the glycoprotein to slowly increase in mass to 115 kilodaltons. After a Kex2p-mediated cleavage event at specific pairs of basic amino acids, alpha-factor and K1 killer toxin precursors have COOH-terminal dibasic residue extensions and require a carboxypeptidase B-like enzyme to process the precursors to maturity. A carboxypeptidase activity, with apparent specificity for basic amino acids, was detected in KEX1 cells. Disruption of the KEX1 gene abolished this activity, while overexpression of KEX1 increased it. Our results provide biochemical evidence consistent with earlier genetic work, that KEX1 encodes a serine carboxypeptidase involved in the processing of precursors to secreted mature proteins.

Base Sequence↗