PubMed Health⌕ Search

Biomedical subjects

H E Junginger

Publications and source records attributed to H E Junginger.

At least 19 recordsLinked to original sources

Biowaiver monographs for immediate release solid oral dosage forms: isoniazid.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing isoniazid as the only active pharmaceutical ingredient (API) are reviewed. Isoniazid's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Isoniazid is "highly soluble" but data on its oral absorption and permeability are inconclusive, suggesting this API to be on the borderline of BCS Class I and III. For a number of excipients, an interaction with the permeability is extreme unlikely, but lactose and other deoxidizing saccharides can form condensation products with isoniazid, which may be less permeable than the free API. A biowaiver is recommended for IR solid oral drug products containing isoniazid as the sole API, provided that the test product meets the WHO requirements for "very rapidly dissolving" and contains only the excipients commonly used in isoniazid products, as listed in this article. Lactose and/or other deoxidizing saccharides containing formulations should be subjected to an in vivo BE study.

Biological Availability↗

Biowaiver monographs for immediate release solid oral dosage forms: prednisolone.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing prednisolone are reviewed. Data on its solubility, oral absorption, and permeability are not totally conclusive, but strongly suggest a BCS Class 1 classification. Prednisolone's therapeutic indications and therapeutic index, pharmacokinetics, and the possibility of excipient interactions were also taken into consideration. Available evidence indicates that a biowaiver for IR solid oral dosage forms formulated with the excipients tabulated in this article would be unlikely to expose patients to undue risks.

Administration, Oral↗

Biowaiver monographs for immediate release solid oral dosage forms: acetaminophen (paracetamol).

Literature data are reviewed on the properties of acetaminophen (paracetamol) related to the biopharmaceutics classification system (BCS). According to the current BCS criteria, acetaminophen is BCS Class III compound. Differences in composition seldom, if ever, have an effect on the extent of absorption. However, some studies show differences in rate of absorption between brands and formulations. In particular, sodium bicarbonate, present in some drug products, was reported to give an increase in the rate of absorption, probably caused by an effect on gastric emptying. In view of Marketing Authorizations (MAs) given in a number of countries to acetaminophen drug products with rapid onset of action, it is concluded that differences in rate of absorption were considered therapeutically not relevant by the Health Authorities. Moreover, in view of its therapeutic use, its wide therapeutic index and its uncomplicated pharmacokinetic properties, in vitro dissolution data collected according to the relevant Guidances can be safely used for declaring bioequivalence (BE) of two acetaminophen formulations. Therefore, accepting a biowaiver for immediate release (IR) acetaminophen solid oral drug products is considered scientifically justified, if the test product contains only those excipients reported in this paper in their usual amounts and the test product is rapidly dissolving, as well as the test product fulfils the criterion of similarity of dissolution profiles to the reference product.

Acetaminophen↗

Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned to Class III. Cimetidine's therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability (BA) problems were also taken into consideration. On the basis of the overall evidence, a biowaiver can be recommended for cimetidine IR products, provided that the test product contains only those excipients reported in this paper in their usual amounts, and that the test and the comparator drug products both are "rapidly dissolving" as per BCS.

Administration, Oral↗

Biowaiver monographs for immediate release solid oral dosage forms based on biopharmaceutics classification system (BCS) literature data: chloroquine phosphate, chloroquine sulfate, and chloroquine hydrochloride.

Literature data on the properties of chloroquine phosphate, chloroquine sulfate, and chloroquine hydrochloride related to the Biopharmaceutics Classification System (BCS) are reviewed. The available information indicates that these chloroquine salts can be classified as highly soluble and highly permeable, i.e., BCS class I. The qualitative composition of immediate release (IR) tablets containing these Active Pharmaceutical Ingredients (APIs) with a Marketing Authorization (MA) in Belgium (BE), Germany (DE), Finland (FI), and The Netherlands (NL) is provided. In view of these MA's and the critical therapeutic indication of chloroquine, it is assumed that the registration authorities had evidence that these formulations are bioequivalent to the innovator. It is concluded that IR tablets formulated with these excipients are candidates for a biowaiver.

Antimalarials↗

Biowaiver monographs for immediate release solid oral dosage forms: ranitidine hydrochloride.

Literature and experimental data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the approval of immediate release (IR) solid oral dosage forms containing ranitidine hydrochloride are reviewed. According to the current Biopharmaceutics Classification System (BCS), ranitidine hydrochloride should be assigned to Class III. However, based on its therapeutic and therapeutic index, pharmacokinetic properties and data related to the possibility of excipient interactions, a biowaiver can be recommended for IR solid oral dosage forms that are rapidly dissolving and contain only those excipients as reported in this study.

Administration, Oral↗

Biowaiver monographs for immediate release solid oral dosage forms: ibuprofen.

Literature data are reviewed on the properties of ibuprofen related to the biopharmaceutics classification system (BCS). Ibuprofen was assessed to be a BCS class II drug. Differences in composition and/or manufacturing procedures were reported to have an effect on the rate, but not the extent of absorption; such differences are likely to be detectable by comparative in vitro dissolution tests. Also in view of its therapeutic use, its wide therapeutic index and uncomplicated pharmacokinetic properties, a biowaiver for immediate release (IR) ibuprofen solid oral drug products is scientifically justified, provided that the test product contains only those excipients reported in this paper in their usual amounts, the dosage form is rapidly dissolving (85% in 30 min or less) in buffer pH 6.8 and the test product also exhibits similar dissolution profiles to the reference product in buffer pH 1.2, 4.5, and 6.8.

Administration, Oral↗

Feasibility study on the retention of superporous hydrogel composite polymer in the intestinal tract of man using scintigraphy.

In recent years, many complex oral drug delivery systems have been developed using various polymers in order to achieve better drug targeting and drug absorption in the intestinal tract. Superporous hydrogel (SPH) and SPH composite (SPHC)-based drug delivery systems were also developed for the targeted delivery of peptide drugs into the intestinal tract. In the present study, the retention time of SPHC polymer is studied in man using the scintigraphy technique. To that purpose, SPHC polymers were radiolabelled with Tc-99m and administered orally in an enteric-coated gelatin capsule. The location of the radiolabelled polymer was monitored in five healthy volunteers while the subjects were sitting in front of a large field of view gamma camera. The results showed that enteric-coated gelatin capsules remained in the stomach for 75 to 150 min after oral administration to fasted volunteers and that the SPHC polymers thereafter attached to the upper part of the small intestine for at least 45 to 60 min due to their mechanical fixation properties. No discomfort was observed in any of the volunteers after oral administration of these polymers, which indicates that they are safe to be applied for oral drug delivery systems in man.

Administration, Oral↗

Biowaiver monographs for immediate release solid oral dosage forms based on biopharmaceutics classification system (BCS) literature data: verapamil hydrochloride, propranolol hydrochloride, and atenolol.

Literature data related to the Biopharmaceutics Classification System (BCS) are presented on verapamil hydrochloride, propranolol hydrochloride, and atenolol in the form of BCS-monographs. Data on the qualitative composition of immediate release (IR) tablets containing these active substances with a Marketing Authorization (MA) in the Netherlands (NL) are also provided; in view of these MA's the assumption was made that these tablets were bioequivalent to the innovator product. The development of a database with BCS-related data is announced by the International Pharmaceutical Federation (FIP).

Administration, Oral↗

Trimethylated chitosan as polymeric absorption enhancer for improved peroral delivery of peptide drugs.

The absorption enhancing effects of chitosan and its derivatives have been intensively studied in recent years. It has been shown that these compounds are potent absorption enhancers. Chitosan is only soluble in acidic environments and is therefore incapable of enhancing absorption in the small intestine, the main absorption area in the gastrointestinal tract. Special emphasis has been placed on the absorption enhancing properties of N-trimethyl chitosan chloride (TMC), a partially quaternised derivative of chitosan, due to its solubility in neutral and basic environments. TMC is prepared by the reductive methylation of chitosan. The degree of quaternisation can be altered by increasing the number of reaction steps or by increasing the reaction time. Although the molecular weight of the polymer increases with addition of the methyl groups, a net decrease in the molecular weight is observed due to a decrease in the chain length of the polymer. TMC, like chitosan, possesses mucoadhesive properties. In vitro studies performed on Caco-2 cell monolayers showed a pronounced reduction in the transepithelial electrical resistance (TEER). TMC is also able to increase the permeation of hydrophilic compounds such as [14C]-mannitol and [14C] polyethylene glycol 4000 ([14C] PEG 4000, MW4000) across the cell monolayers. It was also shown that the degree of quaternisation of the polymer plays an important role on its absorption enhancing properties, especially in neutral environments where chitosan is ineffective as an absorption enhancer. The reduction in TEER is an indication of the opening of the tight junctions located between epithelial cells. Opening of the tight junctions will result in enhancement of absorption via the paracellular route. Confocal laser scanning microscopy confirmed transport of large hydrophilic compounds via the paracellular route as well as the mechanism of action of the polymer in which redistribution of the cytoskeletal F-actin is provoked, which leads to the opening of the tight junctions. Various in vivo studies in different animal models confirmed the ability of TMC to increase the absorption of the peptide drugs buserelin and octreotide after intraduodenal or -jejunal administration. However, TMC has always been administered as a solution in these studies. The impracticality of administering a solution, as well as the fact that most peptides are unstable in the presence of water, have led to the need for a solid oral dosage form with which TMC can be administered together with peptide drugs. Recent studies have focused on the development and in vivo evaluation of solid oral dosage forms.

Adjuvants, Pharmaceutic↗

Influence of methylation process on the degree of quaternization of N-trimethyl chitosan chloride.

N-Trimethyl chitosan chloride (TMC) is a soluble chitosan derivative that shows effective enhancing properties for peptide and protein drug transport across mucosal membranes. TMC was synthesized by reductive methylation of chitosan in an alkaline environment at elevated temperature. The number of methylation process steps and the base used in the process was demonstrated to affect the degree of quaternization of the primary amino group and methylation of 3- and 6-hydroxyl groups. 1H-Nuclear magnetic resonance spectra showed that the degree of quaternization of TMC was higher when using sodium hydroxide as the base compared to using dimethyl amino pyridine. The degrees of quaternization as well as O-methylation of TMC increased with the number of reaction steps. O-Methylation resulted in decreased solubility of TMC. The high degree of quaternization of TMC with a low degree of O-methylation was prepared by employing one reaction step with two subsequent addition steps and a controlled alkaline environment of the mixture reaction.

Chemistry, Pharmaceutical↗

N-trimethyl chitosan chloride as absorption enhancer in oral peptide drug delivery. Development and characterization of minitablet and granule formulations.

In this study, minitablet and granule formulations were developed as solid oral dosage forms for the delivery of peptide drugs with the absorption enhancer N-trimethyl chitosan chloride (TMC). Minitablets were deemed suitable as a dosage form due to their ability, as components of multiple unit dosage forms (MUDFs), to disperse from each other, before disintegration, effectively increasing the area in which the polymer can assert its absorption-enhancing effect. The polymer should be released from the dosage forms prior to the release of the peptide, which was, together with achieving maximum release of both ingredients, the main focus of this study. Desmopressin (1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (DDAVP) was used as model peptide drug. The optimized minitablet formulation consisted of two types of granules, namely DDAVP and TMC granules. DDAVP granules, containing tetraglycerol pentastearate (TGPS), were specifically aimed at delaying the release of the peptide from the dosage form. Burst release of TMC was attempted with TMC granules. Both these granule types were included in the granule formulation. Release profiles for both the optimized minitablet formulation as well as the granule formulation showed that the release of DDAVP was effectively delayed from the formulation compared to the formulation where no attempt at delaying the release was made. In comparison, more TMC was released, and at a faster rate, from the granule formulation than the optimized minitablet formulations. Both the optimized minitablet formulation and the granule formulation show suitable release profiles for the delivery of peptide drugs with TMC as absorption enhancer in solid oral dosage forms.

Adhesives↗

Evaluation of the permeation of peat substances through human skin in vitro.

Peat and various peat extracts have been successfully applied for a variety of clinical indications. Quite apart from the physico-thermal effects, new studies point towards the so-called "chemical effects" of peat containing substances. These effects include a stimulatory response of the spontaneous contractile activity (SCA) of smooth muscle (SM) tissue. The effects are, however, dependent on the possible permeability of pharmacologically active substances as naturally occurring ingredients of peat. Since peat is a mixture of various products it is necessary to examine the various peat types based upon their biological activity on SM tissue. In order to unequivocally prove the pharmacological activity of cutaneous peat treatment, in vitro permeation measurements of these actives across excised human skin can be used.HPLC analysis revealed that aqueous peat extracts contain up to 18 fractions of water-soluble compounds of fulvic and ulmic acids. These compounds have been found to have a stimulatory response on the contractile activity of SM tissue. In vitro diffusion studies showed that the permeability of these substances across human full thickness skin (thickness: 200 um(-1)) is highly selective and the resulting stimulatory activity is dependent on the permeated fraction. Especially, the HPLC fractions 7-11 and 14 are able to permeate human skin. Fractions 7-11 show a moderate stimulatory effect of SCA on SM for more than 90 min whereas fraction 14 shows the strongest stimulatory effect which was, however, suppressed after 87 min. These results show that the cutaneous therapy with peat treatment results in transcutaneaous permeation of biologically active fulvic and ulmic acid derivatives explaining the additional "chemical" effect of peat treatment in clinical practice.

Benzopyrans↗

Buccal delivery of thiocolchicoside: in vitro and in vivo permeation studies.

Thiocolchicoside, a muscle-relaxant agent, is administered by the oral, intra-muscular and topical route. After oral administration the extent of bioavailability compared with intra-muscular administration is low, due to a first pass effect. In this paper, the delivery of thiocolchicoside through oral mucosa is studied to improve the bioavailability. Thiocolchicoside in vitro permeation through porcine oral mucosa and in vivo buccal transport in humans were investigated. Two dosage forms, a bioadhesive disc and a fast dissolving disc for buccal and sublingual administration of thiocolchicoside, respectively, were designed. The in vitro permeation of thiocolchicoside through porcine buccal mucosa from these dosage forms was evaluated and compared with in vivo absorption. Results from in vitro studies demonstrated that thiocolchicoside is quite permeable across porcine buccal mucosa and that permeation enhancers, such as sodium taurocholate and sodium taurodeoxycholate, were not able to increase its flux. The in vivo thiocolchicoside absorption experiments, in which the drug loss from oral cavity was measured, indicated that both formulations could be useful for therapeutic application. The fast dissolving (sublingual) form resulted in a quick uptake of 0.5 mg of thiocolchicoside within 15 min whereas with the adhesive buccal form the same dose can be absorbed over an extended period of time.

Administration, Buccal↗

Identification of an internalising peptide in differentiated Calu-3 cells by phage display technology; application to gene delivery to the airways.

Differentiated, human submucosal-gland carcinoma, Calu-3 cell monolayers were used as in vitro model for the airway epithelium. Internalised phage were selected from a recombinant pComb8 phage library by repetitive cycles of bio-panning on Calu-3 monolayers, protease K degradation, cell-lysis and amplification. After four selection rounds, sequence analysis of 15 enriched phage colonies revealed two clones of 73 and 27% abundancy, named IB1 and IB2, respectively. The IB2 sequence was eliminated due to a frame shift. IB1-phage internalisation at 4 degrees C was significantly lower (P < 0.05) than at 37 degrees C, suggesting involvement of a receptor-mediated endocytosis pathway. The IB1 peptide was synthesised, biotinylated and complexed to streptavidin. IB1/streptavidin-complexes co-administrated with PEI/DNA-polyplexes, enhanced polyplex transfection efficiency, dose dependently, by 6- and 4-fold in Calu-3 cells. IB1/Alexa488-streptavidin complexes were used for confocal laser-scanning microscopy (CLSM) visualisation and showed basolateral localisation in membrane associated and internalising vesicles. This study demonstrates the potential of phage display technology for identification of internalising peptide-epitopes that can enhance gene delivery efficiency in differentiated airway epithelial cells.

Biotin↗

Iontophoretic delivery of apomorphine: from in-vitro modelling to the Parkinson patient.

Apomorphine is a mixed dopamine D1/D2 receptor agonist which is potentially useful in the treatment of Parkinson's disease. The delivery of apomorphine is however complicated because it is not absorbed orally and other delivery routes with the exception of the intravenous route seem to fail. The most interesting route for controlled delivery of apomorphine is transdermal iontophoresis because this could enable the Parkinson patient to directly control the needed amount of apomorphine by increasing or decreasing the drug input in order to achieve optimal drug therapy ('on-demand') with a minimum of toxic side effects. The typical features of Parkinson's disease could be used to monitor the needed drug input and even more elegantly by means of suitable chip sensors which are able to directly measure bradykinesia, akinesia and/or tremor and to regulate in such a way the drug input. Such a chip-controlled iontophoretic system would be the first closed-loop system monitoring not pharmacokinetic data (blood levels) but more importantly externally measurable pharmacodynamic effects of Parkinson's disease. This scenario is more feasible as skin irritation and toxicity studies have proven that iontophoresis is a safe route of treatment. This review describes the basics of iontophoresis and the development of a transdermal iontophoretic delivery system on the basis of integrated pharmacokinetic/pharmacodynamic (PK/PD) investigations in patients with idiopathic Parkinson's disease. Transdermal iontophoretic transport of apomorphine was studied both in vitro with human stratum corneum using a newly developed iontophoretic continuous flow-through transport cell and in vivo in a first exploratory study in patients with Parkinson's disease. These studies showed that the delivery of apomorphine is feasible and furthermore the rate of delivery can be controlled by variation of the current densities. Additionally the pretreatment of the skin either with a mono-surfactant or a vesicular suspension of elastic liquid-state vesicles may be useful to further increase the apomorphine flux across the skin in combination with iontophoresis.

Administration, Cutaneous↗

Intestinal absorption of human insulin in pigs using delivery systems based on superporous hydrogel polymers.

In this in vivo study, novel delivery systems based on superporous hydrogel (SPH) and SPH composite (SPHC) polymers were used to improve the intestinal absorption of insulin in healthy pigs. Six female pigs of approximately 35 kg body weight were used. A cannula was inserted into the jugular vein for blood sampling and a silicone fistula in the duodenum for administration of gelatin capsules containing the delivery systems or insulin solutions. The delivery systems consisted of two components, (1) conveyor system made of SPH and SPHC; (2) core containing insulin. The core was inserted either into the conveyor system (core inside, c.i.) or attached to the surface of conveyor system (core outside, c.o.). The following intestinal formulations were investigated: c.i., c.o. and intraduodenal (i.d.) administration of insulin solutions. Subcutaneous (s.c.) injection of insulin was also investigated for reasons of comparison. Blood samples were taken and analyzed for insulin and glucose concentrations. Relative bioavalibility values of 1.3+/-0.4 and 1.9+/-0.7% were achieved for c.o. and c.i. administrations, respectively. The bioavalibility for i.d. administration of insulin solution was 0.5+/-0.2%. These results indicate that the absorption of insulin was slightly increased using SPH/SPHC-based delivery systems. Furthermore, a large variability was observed, probably due to physiological and metabolic changes during the experiments. Blood glucose levels were slightly decreased after the c.o. and c.i administrations, whereas these levels did not decrease after i.d. administration of insulin solutions. In conclusion, SPH/SPHC-based delivery systems are able to enhance the intestinal absorption of insulin and are, therefore, considered as promising systems for peroral peptide drug delivery. However, insulin delivery from these delivery systems under in vivo have to be improved.

Animals↗

Buccal transport of flecainide and sotalol: effect of a bile salt and ionization state.

Patients with infrequent attacks of supraventricular arrhythmia may benefit from self administration of antiarrhythmic drugs on an 'as required' basis. The oral cavity is easily accessible and the potential for rapid absorption exists. The effects of ionization state and sodium glycocholate on the ex vivo transport of sotalol and flecainide across porcine buccal mucosa were studied. The permeated amounts at 3 h (Q) and fluxes (J) of sotalol in an aqueous solution at pH 7.4 and 9.0 were similar. At pH 7.4, in contrast to pH 9.0, the addition of 1.0% (w/v) sodium glycocholate decreased Q and J four and five fold. Flecainide base in propylene glycol resulted in a nine and 12 fold higher Q and J as compared with an aqueous solution of flecainide acetate at pH 5.8. The presence of sodium glycocholate reduced the transport rate of the flecainide base. However, Q and J were increased 110 and 75 fold by adding 1.0% (w/v) sodium glycocholate to a solution of flecainide acetate at pH 5.8. Sodium glycocholate seems to be an effective penetration enhancer for the buccal absorption of the more polar ionized form of flecainide in an aqueous solution. Sodium glycocholate does not seem to improve the transport of sotalol.

Animals↗