PubMed Health⌕ Search

Biomedical subjects

H Höcker

Publications and source records attributed to H Höcker.

At least 19 recordsLinked to original sources

Domain sizes in heterogeneous polymers by spin diffusion using single-quantum and double-quantum dipolar filters.

1H spin-diffusion experiments employing a double-quantum (DQ) dipolar filter were performed for the characterization of the microdomain structure of heterogeneous samples. For this purpose the NMR spin-diffusion process was analysed based on a model morphology of three different domains with arbitrary sizes, diffusivities, and filter efficiency. General analytical solutions for z magnetization source and sink were obtained valid for a one-dimensional lamellar morphology in the full range of spin-diffusion times. These solutions of the spin-diffusion equations were used for determining the crystalline, interface, and amorphous domain sizes in polystyrene-poly(ethylene oxide) (PS-PEO) and poly(hydroxyethylmethacrylate)-poly(ethylene oxide) (PHEMA-PEO). The DQ dipolar filter has a good efficiency for PS-PEO but is only partially efficient in filtering the signal of the mobile domains in the PHEMA-PEO diblock copolymer. The domain sizes measured by the DQ filter method are compared to those obtained using the traditional dipolar filter creating z magnetization in the mobile domains.

Journal Article↗

High density binding of proteins and peptides to poly(D,L-lactide) grafted with polyacrylic acid.

The use of graft polymers for the functionalisation of biomaterial surfaces is already widespread. We investigated the adsorptive and covalent binding of a variety of proteins and peptides to poly(D,L-lactide) grafted with polyacrylic acid. Covalent attachment was achieved through coupling of amino groups of the protein/peptide to the carboxyl groups of the graft polymer by using a water-soluble carbodiimide and N-hydroxysuccinimide. Binding densities were determined by automated amino acid analysis after acid hydrolysis of both the poly(D,L-lactide) and the adsorbed and covalently bound proteins. Experiments in the absence and presence of the coupling reagents allow to discriminate between adsorptive and covalent binding. Although the adsorptivc binding is quite substantial in absolute terms, the amount of adsorbed protein is relatively low as compared to the total amount of bound protein. Total binding densities of 20-30 microg/cm2 can easily be achieved. Depending on the concentration and on the properties of the proteins and peptides, between 5% and 80% of the totally bound protein may be physically adsorbed. Densities expressed in molecules/10 nm2 vary from 0.5 molecule fibronectin to 2,000 laminin-peptide molecules: their binding densities clearly correlate with their respective molecular masses. Obviously, the binding densities are governed by their individual three-dimensional space requirements rather than the density of the available carboxyl groups. From the number of carboxyl groups/10 nm2 (18,000-30,000 COOH/10 nm2) the average length of the acrylic acid graft polymer molecules was estimated. Based on the assumption that about 10 copolymer chains can be accommodated on 10 nm2, the average length of the polymer chains, which corresponds to the thickness of the graft phase, is estimated to be 0.5-1 microm. The organisation of the proteins and peptides within the polyacrylic acid phase was further investigated by experiments in which a protein (BSA) and a peptide (Val-Lys) were allowed to react in either a singular, a consecutive or a simultaneous way. Together with XPS and IR-ATR surface characterisation experiments a three-dimensional picture of the arrangement of the immobilised proteins and peptides within the graft polymer phase emerges.

Acrylic Resins↗

Minimization of protein adsorption on poly(vinylidene fluoride).

Surfaces covered with polyethylene glycol (PEG) have been shown to be biocompatible because PEG yields nonimmunogenicity, nonantigenicity and protein rejection. To produce a biocompatible surface coating, we have developed a method for grafting PEG onto modified poly(vinylidene fluoride) (PVDF) films. The first step was to create carboxy groups on the PVDF surface following covalente coupling of polyethylenimine (PEI) to achieve high density of amino groups. These surface amines were reacted with formyl-terminated PEG's with various molecular weight. The modified PVDF surface was characterized by means of static contact angle measurements, infrared (IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The influence of the chain length on lysozyme repellence was investigated by means of surface-MALDI-Tof mass spectrometry (Surface-MALDI-Tof-MS). Lysozyme adsorption was significantly suppressed on the PEG 5000 modified PVDF surface.

Adsorption↗

Postulation of the mechanism of the selective synthesis of isotactic poly(methyl methacrylate) catalysed by [Zr[(Cp)(Ind)CMe2](Me)(thf)](BPh4): a Hartree-Fock, MP2 and density functional study.

The bridged. C1-symmetric, single-component zirconocene [Zr((Cp)(Ind)CMe2](Me)(thf)](BPh4) (Ind = indenyl, Cp = cyclopentadienyl) polymerises methyl methacrylate (MMA) selectively to isotactic poly(methyl methacrylate) (PMMA) without further cocatalysts or activators. To elucidate the stereoselective steps of the polymerisation of MMA by using this catalyst we studied the propagation steps occurring with the derivative [Zr[(Cp)(Ind)CH2][-O-C(OMe)=C(Me)(Et)](MMA)]+ by ab initio calculations at the Hartree-Fock(HF) level of theory. After the initiation step, which consumes the first two MMA molecules, each new catalytic cycle begins with the stereoselective addition of a new MMA molecule at the indenyl side of the zirconocene fragment. At the same time the enolate ring undergoes a stereoselective in-plane ring shift to the side opposite to the indenyl ring. These findings are used to postulate a mechanism for the polymerisation that explains the stereoselective synthesis of isotactic PMMA.

Journal Article↗

Extremozymes for improving wool properties.

The project 'EXTRETEX' funded by the German Federal Foundation Environment (DBU, Osnabrück, Germany) aims at the improvement of wool properties dyeability, handle, felting behaviour and degree of whiteness by means of enzymes derived from extremophilic micro-organisms. In this paper the effects of a commercial thermo- and alkalistable protease on wool with regard to the degree of whiteness, the dyeability and the felting behaviour are presented. A method to treat wool top and wool fabric was developed on a laboratory scale in which the protease was integrated into the pre-washing step of a dyeing process. This treatment method was than scaled up and tested on an industrial winch beck for fabric. With this method-the addition of enzyme in the pre-washing step-the degree of whiteness is generally enhanced. Dyeing untreated and the enzyme-treated wool with Lanasol Blue 8G leads to an improved dyestuff uptake and a distinctive difference in the colour shade for the latter. Microscopy pictures of fibre cross-sections of these samples display a more even distribution of the dyestuff and a better penetration in the enzyme-treated wool fibres but the colour fastness of the enzyme-treated wool is decreased. Though the felting behaviour of the protease treated wool is significantly improved the felting tendency is still too high for an antifelting finish. An increased damage of the enzyme-treated wool in comparison with the untreated one was not observed.

Animals↗

Functionalization of silicone rubber for the covalent immobilization of fibronectin.

Surface modification techniques were employed in order to provide functionalized silicone rubber with enhanced cytocompatibility. Acrylic acid (AAc), methacrylic acid (MAAc) and glycidylmethacrylate (GMA) were graft-co-polymerized onto the surface of silicone induced by an argon plasma and thermal initiation. The polymerizations were carried out in solution, in the case of acrylic acid a vapor phase graft-co-polymerization subsequent to argon plasma activation was carried out as well. Human fibronectin (hFn), which acts as a cell adhesion mediator for fibroblasts, was immobilized by making use of the generated carboxylic or epoxy groups, respectively. Surface analysis was accomplished by means of X-ray photoelectron spectroscopy (XPS), infrared spectroscopy in attenuated total reflection mode (IR-ATR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and dynamic contact angle measurements using the Wilhelmy-plate method. The amount of immobilized active hFn was semiquantified by enzyme-linked immunosorbent assay (ELISA) using a structure-specific antibody against the cell-binding domain of hFn. In vitro testing showed a remarkable difference between surfaces exposing adsorbed-only and surfaces with covalently immobilized hFn.

Journal Article↗

Immobilization of the thrombin inhibitor r-hirudin conserving its biological activity.

Surface immobilization of the thrombin inhibitor r-hirudin was carried out on two different polymers. Linkage to poly(urethane-graft-acrylic acid) (PAC/PU) was done via carboxylic acid groups, using a water soluble carbodimide, while the immobilization on a modified poly[(ethene-co-vinyl acetate)-graft-vinyl chloride] (PVC/EVA) was achieved via the alcohol groups of the polymer using HDI as spacer. Direct immobilization of r-hirudin leaded to a remarkable loss of thrombin activity. As proved by means of protein chemical analysis, loss of activity was due to a selective coupling via the N-terminal amino group of r-hirudin, which is essential for its thrombin activity. Based on these results we developed an immobilization method via an epsilon-amino group of r-hirudin preserving full biological activity of the r-hirudin coated surface.

Journal Article↗

Differently labeled peptide ligands for rapid investigation of receptor expression on a new human glioblastoma cell line.

The neuropeptides vasoactive intestinal peptide (VIP), neuropeptide Y (NPY), and substance P (SP) as well as insulin and insulin-like growth factor 1 (IGF-1) were labeled with biotin, fluorescent dyes, and radioactivity to characterize the expression of peptide receptor of a novel cancer cell line, established from a human glioblastoma multiforme. Thus, not only binding sites could be detected but advantages and disadvantages of the different labels could be compared, too. With all three markers, the presence or absence of the receptors could be answered rapidly and sensitively. The glioblastoma cells express receptors for VIP (IC(50) = 9 nM +/- 30%), insulin (K(d) = 0.66 nM +/- 14%, B(max) = 0.028 nM +/- 13%), and IGF-1 (K(d) = 21 nM +/- 25%, B(max) = 1.65 nM +/- 24%), but there are no binding sites for NPY and SP. As especially VIP and IGF-1 receptors are expressed in huge amounts, these receptors might be an interesting target for tumor diagnostics and therapy.

Binding Sites↗

Monitoring of the internalization of neuropeptide Y on neuroblastoma cell line SK-N-MC.

Neuropeptide Y (NPY) is an important neuromodulator in the central and peripheral nervous system. The peptide acts through different NPY receptor subtypes (Y1-Y5, y6) that belong to the family of G protein-coupled receptors. In general, cellular responses to prolonged exposure to agonists of G protein-coupled receptors are attenuated, often through internalization of the receptors and their bound ligands. In this study, a fluorescent labeled NPY derivative was synthesized and characterized to investigate the internalization of NPY in the human neuroblastoma cell line SK-N-MC. Internalization was proven by binding experiments and subsequent acidic washing as well as by direct visualization by means of confocal laser scanning microscopy. Approximately 20-30% of the fluorescent labeled NPY and a tritium-marked NPY were resistant to acid removal of cell surface-bound ligands indicating internalization. Extracellular fluorescent labeled NPY was found to be distributed heterogeneously in a clustered pattern, which suggests that the ligand-receptor complex is collected in pits and caveolae followed by endocytosis.

Amino Acid Sequence↗

Quantitative Assessment of Protein Adsorption by Combination of the Enzyme-Linked Immunosorbent Assay with Radioisotope-Based Studies.

Protein adsorption at polymer surfaces has been investigated by means of both ELISA and radiolabeling techniques. Most of the data obtained are linearly related to each other for protein concentrations between 0.01 and 1 µg/ml, i.e., the concentration range in which the maximum amount of adsorbed active protein (ELISA) is achieved. The correlation of ELISA data with radioisotope-based measurements allows quantification of the former. Specific correlation factors are described. Adsorption is shown to be strongly dependent on the polymer/protein system. Copyright 1999 Academic Press.

Journal Article↗

Improvement of haemocompatibility of metallic stents by polymer coating.

An alternative to open heart surgery in treating arterial diseases causing restricted blood flow is the implantation of intracoronary metallic stents. In spite of the advances in implantation and in spite of the excellent mechanical properties of metallic stents, there are still limitations because of the thrombogenicity of the metal. We have, hence, directed our attention to the coating of metallic stents with an ultrathin polymer layer by chemical vapor deposition (CVD) polymerization of 2-chloroparacyclophan. In a second step of surface modification the poly(2-chloroparaxylylene) layer is modified by treatment with a sulfur dioxide plasma in order to obtain a more hydrophilic surface with new functional groups. The results demonstrate the stable polymer coating of the stents and the improvement of haemocompatibility after treatment with sulfur dioxide plasma. Platelet adhesion is decreased from 85% for the metal surface to 20% for the CVD-coated and sulfur-dioxide-plasma treated surface.

Journal Article↗

Cell culture tests for assessing the tolerance of soft tissue to variously modified titanium surfaces.

The aim of our research project was to achieve an improvement in the integration of enossal dental implants in the region of peri-implantary soft tissue. Improvement in the adhesion of the gingiva of the surface of enossal implants was to be achieved by modification of the titanium surface. The effect of different modifications on the biocompatibility of the modified titanium surfaces was tested: sulfur dioxide plasma treatment of titanium; acetylene plasma treatment of titanium followed by sulfur dioxide plasma etching; plasma nitration of titanium; replacement of titanium by glycidoxypropyltrimethoxy silane; coating titanium with poly[(ethene-co-vinyl acetate)-graft-vinyl chloride] and coating titanium with fibronectin. Determination of the chemical composition of the surface was carried out using X-ray photospectroscopy. The adsorption of fibronectin at the surface of the titanium was tested using an Enzyme Linked Immunosorbent Assay. In selected in vitro tests with human gingival fibroblasts, cell morphology was assessed using scanning electron microscopy and light microscopy. Cell proliferation and protein synthesis, as well as the activity of mitochondrial dehydrogenases were evaluated. By means of centrifugation and by determining initial cell adhesion, the adhesion of gingival fibroblasts was investigated. According to the kind of modification made to the titanium surfaces, it was possible to observe differences in the cellular behavior of gingiva fibroblasts on the differently modified surfaces of the implants. Coating the titanium using fibronectin produced optimization of cell growth and improvement in the adhesion of gingiva fibroblasts to the implant surface. In contrast, modification of the titanium with poly[(ethene-co-vinyl acetate)-graft-vinyl chloride] generally resulted in a deterioration of the biocompatibility of the surface. A marked correlation between the cellular compatibility of the modified titanium and the surface modification made did not become apparent. One reason for this is the large number of parameters determining the interaction between implant and tissue.

Cell Adhesion↗

Functionally adapted surfaces on a silicone keratoprosthesis.

BACKGROUND: Silicone intraocular lenses as well as silicone sponges and encircling bands on the bulbar surface are widely used and are well tolerated. The aim of this project is a new one-piece silicone keratoprosthesis with enhanced cell adhesion in the haptic region to optimize the keratoprosthesis stability. These investigations show how enhanced profileration of conjunctival fibroblasts and, therefore, improved tissue compatibility can be achieved by hydrophilizing and by protein immobilisation on a hydrophobic silicone surface. This allows a combination of desired chemical and mechanical properties of the silicone bulk material with surfaces of improved tissue compatibility. METHODS: Silicone foils with surface modifications of different kinds were tested. Experiments were done using cell cultures with murine fibroblasts L-929 and human conjuctival fibroblasts. Cytotoxicity assays were carried out with cells grown on the material in direct contact, as well as in indirect contact, with extracts (EN 30993-5). Viability stains by means of fluoresceindiacetate and ethidiumbromide together with morphology analyses by hemalaun-staining were performed. RESULTS: For the unmodified and modified foils themselves and their extracts any negative influence on cell cultures of murine and human cells could be excluded. There was a gradual improvement of cell morphology, spreading and proliferation dependent on the degree of surface modification. Covalently immobilised fibronectin showed the best results in contrast to adsorptive binding. CONCLUSIONS: Silicone surfaces can be modified chemically with bioactive proteins. These modifications are cell compatible and do not result in toxic reactions. The degree and type of silicone hydrophilization results in improved development of cell morphology, spreading and proliferation. Even better results are obtained after covalent binding of bioactive proteins like fibronectin. Improved biocompatibility with enhanced cellular overgrowth has been demonstrated in vitro for the modified silicone of the haptic region. We believe that this type of modification will help in reducing extrusion problems observed with former keratoprostheses.

Animals↗

[Characterization of the properties of differently modified titanium surfaces for dental implantology. 1: Methods for surface analysis].

Contact between the biological environment and biomaterials takes place at their surfaces. The biocompatibility of a material is determined by interactions at the interface between implant and biological system. The physicochemical surface properties of the materials used, for example, chemical composition, wettability, surface energy and electrical surface charge, therefore play an important role. Within the framework of the investigations described here, specific modifications of the surfaces properties of titanium are effected using various methods with the aim of achieving a positive influence on cell growth and cell attachment. To characterize the physicochemical surface properties, X-ray photoelectron spectroscopy (XPS) have been used. In addition to the clearly altered chemical composition of the modified material surface, it proved possible to determine significant changes in the thermodynamic properties with the aid of contact angle measurements and the determination of surface energy. On the basis of these results, important information about possible interactions at the interface between implant and tissue can be obtained.

Biocompatible Materials↗

[Characterization of the properties of differentially modified titanium surfaces for dental implantology. 2: In vitro biocompatibility studies].

The aim of the present study was to determine whether specific surface modifications are capable of improving the biocompatibility of a titanium surface, and whether there is a correlation between the physico-chemical properties of the implant material and its biocompatibility. To this end, the properties of titanium surfaces were modified using various methods or the latter were coated with various materials. Plasma treatments under different atmospheric conditions (N2-plasma, SO2-plasma, acetylene plasma) as well as plasma polymerization were used to affect the biological response. Characterization of the physico-chemical surface properties by means of X-ray photoelectron spectroscopy (XPS), contact angle measurements and the calculation of surface tensions or surface energy provided important information on the interactions at the interface between the implant material and the aqueous environment. The influence of the respective surface modification on cell proliferation, cell viability and the activity of mitochondrial dehydrogenases was evaluated in specific in vitro tests with human gingiva fibroblasts. It was show that different modifications of the titanium samples induce different biological responses of the gingiva fibroblasts. The results confirm the existence of correlations between thermodynamic surface properties and cellular reactions under in vitro conditions.

Cell Division↗

Development of a biodegradable ureteric stent: surface modification and in vitro assessment.

The aim of the present study was to develop a short bioresorbable ureteric stent and to characterize the chosen polymers with respect to surface modification, biocompatibility, and loading of a biologically active compound. As materials for the stent, poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) were chosen. Degradation experiments were carried out and analytical data were obtained by contact angle measurement, X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy in the attenuated reflection mode (FTIR-ATR). Gas loading technology was used to incorporate biologically active compounds, and biocompatibility of the polymers was assessed by in vitro cellular assays, applying measures such as cell morphology, proliferative activity, and membrane integrity. Our results indicate that surface modification of bioresorbable polymers is a suitable and efficient approach to improve the surface properties. Incorporation of biologically active compounds was possible without loss of activity, and in vitro assessment of cellular responses demonstrated the biocompatibility of the chosen polymers and modifications.

Absorption↗

Structure and rotational dynamics of fluorescently labeled insulin in aqueous solution and at the amphiphile-water interface of reversed micelles.

Insulin is a proteohormone with amphipathic three-dimensional structure and the ligand of a receptor, which itself spans the plasma membrane of glucose-metabolizing cells. In this study, the possible impact of amphiphiles on structural and dynamic properties of the hormone was investigated in reversed micelles mimicking the amphipathic nature of biological membranes. To make insulin susceptible to fluorescence measurements, two derivatives labeled with 2-aminobenzoic acid (Abz), N epsilon B29-Abz-insulin and [AbzB1]insulin, were prepared. First, the Abz-labeled insulins were shown by CD spectroscopy to exhibit conformational properties and self-association as well as the T-->R transition similar to the native hormone. By means of time-resolved fluorescence measurements, not only metal-ion induced hexamerization was observable in aqueous solution: The T-->R allosteric transition of the hexamer was shown to be accompanied by a diminution of its hydrodynamic radius. Second, structure and rotational dynamics of the labeled insulins were investigated in reversed micelles. In sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reversed micelles, the main-chain conformation is similar to that in aqueous solution according to CD spectroscopy in the far-UV, whereas the weak circular dichroism in the near-UV is indicative of reduced aromatic contacts as well as of the absence of quaternary structure, and the CD spectra show the same shape as found for proteins in an intermediate state of folding referred to as the "molten globule". Fluorescence anisotropy decay measurements of N epsilon B29-Abz-insulin in reversed micelles of AOT, cetyltrimethylammonium bromide, and alpha-L-1,2-dioctanoylphosphatidylcholine showed that the internal mobility of the solubilizate is reduced compared to that in aqueous solution and that the rotational mobility of the labeled insulin decreases with decreasing micellar size. With respect to the immobilization, insulin interacts in a stronger way with the anionic than with the cationic or zwitterionic amphiphile; an integration into the amphiphile monolayer, however, could be ruled out in all cases. In conclusion, the results reveal an evident influence of amphiphiles on the structure and rotational dynamics of insulin. Further investigations should be focused on this finding also with regard to the possible importance of lipid-insulin interactions in vivo.

Fluorescent Dyes↗

Development and characterization of a wettable surface modified aromatic polyethersulphone using glow discharge induced HEMA-graft polymerisation.

The aromatic polyethersulphone (PES) is a well known polymer for the preparation of membranes with excellent thermal stability and chemical resistance. The disadvantage of PES-membranes is their hydrophobic character, which in contact with protein containing solutions leads to high protein adsorption and as a consequence to deterioration of membrane properties. In this report the surface modification of PES by means of glow discharge induced grafting of 2-hydroxyethyl methacrylate (HEMA) is described. Graft polymerisation creates a largely wettable layer of poly(2-hydroxyethyl methacrylate) (PHEMA) on the surface of PES. This has been shown by contact angle measurements using the Wilhelmy plate method. Chemical characterization is carried out by means of X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy/attentuated total reflection (FTIR-ATR). The influence of storage conditions on the surface properties of modified PES samples has been investigated after storage in vacuum, water, and air.

Journal Article↗