Occupational exposure information needs for regulatory risk assessment of existing chemicals.
Explore the source record for details and available documents.
Data Collection↗
Biomedical subjects
H Marquart
Publications and source records attributed to H Marquart.
Recording of data of individual measurements of occupational exposure: guideline of the Dutch Society of Occupational Hygiene (October 1999).
Following the recommendations of the European Working Group on Exposure Databases, a Working Group (on Storage of Data of Measurements of Occupational Exposure) of the Dutch Occupational Hygiene Society has developed a Guideline which was presented at the International Symposium on Occupational Exposure Databases and Their Application for the Next Millennium, November 1-3, 1999, London. To establish the present situation, a small-scale telephone survey of monitoring practices and storage of data was done within the Society. The results of the telephone survey and the draft guidance document were discussed with the occupational hygienists and other stakeholders (e.g., authorities, industry, labor unions, and occupational physicians) in a society meeting. This meeting was used to gather ideas on the need and support for a guidance document and to get input for improving the draft guidance document and for implementation of the Guideline. After this meeting, the Guideline was further developed and published by the Dutch Occupational Hygiene Society. The Guideline concentrates on the data elements required when storing exposure data. The data elements presented are the minimum and should be stored minimally to ensure proper interpretation of results at present and in the future and definitions of the items used are given. The Guideline does not prescribe how the data should be stored, or which procedures need to be used to guarantee the quality of the recorded data elements.
Data Collection↗
Assessing reasonable worst-case full-shift exposure levels from data of variable quality.
Exposure assessors involved in regulatory risk assessments often need to estimate a reasonable worst-case full-shift exposure level from very limited exposure information. Full-shift exposure data of very high quality are rare. A full-shift value can also be calculated from (short term) task-based values, either derived from measured data or from models. The most simple option is to use the task based exposure levels as the full-shift value. A second option is to calculate a time-weighted average (TWA), using (reasonable worst case) estimates of the duration and the exposure level of the relevant tasks. The third option is to use a Monte Carlo analysis with estimated input distributions for exposure level and duration of exposure. If an estimated distribution of respiratory volume is also included, this leads to a distribution of inhaled amounts. The 90th percentile of such a distribution is generally substantially lower than the fixed point estimates calculated using high end values for each parameter. This technique can thus prevent unnecessary conservative estimates in risk assessment. The output distribution can also be used as valuable input to the risk management process, because it provides information on probabilities of exposure levels, that can influence the cost-benefit analysis of the risk management process. Finally, the sensitivity analysis of Monte Carlo simulation can give guidance for further studies to increase the accuracy of the exposure assessment.
Europe↗
Harmonization of future needs for dermal exposure assessment and modeling: a workshop report.
Dermal exposure assessment and modeling is still in early phases of development. This article presents the results of a workshop organized to harmonize the future needs in this field. Methods for dermal exposure assessment either assess the mass of contaminant that is transferred to the skin, or the transfer of contaminant through the skin. Models for dermal exposure are either knowledge-based or deterministic. Any method or model should be transparent, validated, and open to further development. Some (partly) validated and standardized methods are available for measuring or modeling permeation of the skin or of personal protective equipment (PPE). Further validation and standardization is necessary. More research is needed on permeation of dusts and aerosols and more realistic tests should be developed and used for PPE. Several methods have been developed to measure contamination of surfaces or skin, but they are not validated or standardized. A number of non-validated models exist to assess dermal exposure. A clear need exists for more studies of dermal exposure, regarding measurement methods, models and actual exposure levels. A running four-year European study will greatly expand the knowledge in this field. Simple tools to assess and control the risks of dermal exposure in small and medium sized enterprises are also needed. Increasing the general knowledge of practitioners (e.g., safety professionals, occupational hygienists and physicians) in the field of dermal exposure is a first requirement. Available data, for example, on the permeation of PPE, should be made more readily available, using modern information technology. When information on dermal exposure is gathered and stored, the core information needs are partly the same as those for inhalation exposure. Some elements of process and activity, substance and product or worker, specific for dermal exposure, have been suggested by the workshop.
Europe↗
Proposal for an approach with default values for the protection offered by PPE, under European new or existing substance regulations.
Introduction of personal protective equipment (PPE) in the process of quantitative exposure and risk assessment should be addressed carefully. PPE which have been designed and manufactured according to CE-criteria and have proved to pass relevant test criteria, can be classified as "proper functioning". However, test criteria for PPE are not equal to levels of protection which can be achieved in the workplace, because actual workplace exposure scenarios, fit, maintenance and storage may differ substantially from the test conditions. The proper use of PPE is related to issues which form a part of a PPE-programme. Such a programme should be implemented in a company to ensure selection of proper PPE and information, training and instruction of employees how to wear PPE properly. Assigned protection factors (APFs) for different designs of respiratory protective devices (RPD) have been introduced to quantify effectiveness of RPD in the workplace. Similar APFs are proposed for dermal protection (gloves and clothing). In general biological monitoring studies show lower reduction of internal exposure than estimated by reduction of external exposure. Therefore, conservative estimates of protection by PPE, i.e. the lowest APFs, are proposed for risk assessment purposes if "proper use of proper functioning" PPE as part of a PPE-programme cannot be demonstrated.
Accidents, Occupational↗
Two edged role of mannose binding lectin in rheumatoid arthritis: a cross sectional study.
OBJECTIVE: We investigated whether polymorphisms in the gene of mannose binding lectin (MBL) may be associated with onset of rheumatoid arthritis (RA), and whether MBL in conjunction with aggregated agalactosyl IgG (IgG-G0) may be associated with clinical and paraclinical variables. METHODS: MBL genotypes and serum concentrations were measured by polymerase chain reaction and ELISA in 189 patients with established RA. Binding of purified MBL to IgG-G0 in serum was assessed and clinical and paraclinical variables were recorded. RESULTS: The median age at onset of RA in the 3 genotypes (normal: A/A, hetero: A/0, and homozygous: 0/0 for variant alleles) was 54.1 (n = 108), 47.0 (n = 68), and 38.4 years (n = 13), respectively (p = 0.01). The frequency of variant alleles in patients with onset below the median age (50.8 yrs) was 0.32, but was 0.17 in patients with onset above 50.8 years (p = 0.003) and 0.20 in 250 controls (p = 0.001). Stratification according to erosion score (no, small, large) revealed an increasing tendency among the different groups in binding of MBL to IgG-G0, increased Health Assessment Questionnaire score, and acute phase reactants in A/A individuals, while no difference was seen among carriers of variant alleles. This effect was most pronounced in those with late onset RA. CONCLUSION: Presence of MBL variant alleles was associated with early onset of RA. MBL deficiency may, therefore, accelerate the disease. However, in patients with late onset and advanced disease our results indicate that the A/A type may be associated with additional inflammation different from that seen in carriers of variant alleles.
Adult↗
CC chemokine receptor 5 polymorphism in rheumatoid arthritis.
OBJECTIVE: Some chemokine receptors have been shown to be co-receptors for human immunodeficiency virus (HIV-1). A 32 base pair deletion allele in the CC chemokine receptor 5 gene (CCR5 delta32 allele) affects both transmission of HIV-1 and acquired immunodeficiency syndrome (AIDS)-free survival. Chemokines are suggested to be critical for establishment of inflammatory processes in autoimmune diseases such as rheumatoid arthritis (RA). We hypothesized that the defective allele may modulate the inflammatory process in RA. METHODS: Using polymerase chain reaction methods, we investigated the significance of the CCR5 delta32 allele in 163 Danish patients with RA and monitored clinical and paraclinical variables. RESULTS: The gene frequency of the CCR5 delta32 allele (0.10) did not deviate significantly from healthy controls and from that reported in healthy Caucasian populations, nor did the distribution deviate from the Hardy-Weinberg predictions (131 wild type, 30 heterozygous, 2 homozygous for the deletion allele; p = 0.85). However, a significantly increased proportion of those carrying the deletion allele were negative for IgM rheumatoid factor (RF) compared to those homozygous for the normal allele (29 vs 9%; p = 0.007). The proportion of CCR5 delta32 allele carriers with swollen joints was decreased compared to those homozygous for the normal allele (35 vs 58%, respectively; p = 0.03), as was the duration of morning stiffness (median 0 vs 60 min, respectively; p = 0.0002). CONCLUSION: The CCR5 delta32 allele seems to have some influence on RA variables including RF, which suggests that inhibition of chemokine receptors might be a potential target for disease modifying therapy in RA.
Adult↗
Risk assessment of dermal exposure of greenhouse workers to pesticides after re-entry.
On 18 farms for rose culture in greenhouses in The Netherlands, dermal exposure of hands and forearms to abamectin (avermectin B1), dodemorph (4-cyclododecyl-2,6-dimethylmorpholinium acetate) and bupirimate (5-butyl-2-(ethylamino)-6-methyl-4-pyrimidinyl dimethylsulphate) was measured during crop activities. Dermal exposure during cutting (75 workers) amounted to 13 micrograms/h, 1.8 mg/h, and 2.2 mg/h for abamectin, dodemorph and bupirimate, respectively. Dermal exposure to abamectin and dodemorph during sorting (21 workers) and bundling (30 workers) was comparable with that during cutting. From the dependence of dermal exposure on the amount of dislodgeable foliar residue (DFR) a transfer factor was estimated to be 1,200, 4,550, and 2,400 cm2/h for abamectin, dodemorph and bupirimate, respectively. For sorting and bundling these factors were of the same order of magnitude. The results suggested that work rate was also a determinant of dermal exposure. The within-farm variance of dermal exposure during cutting appeared to account for approximately 30% of the unexplained part of the variation remaining after regression on DFR and application technique. The final unexplained part in the variation of dermal exposure during cutting was amongst others due to the variation between the different farms in which the measurements were performed. A health risk evaluation of the observed levels of dermal exposure after re-entry of greenhouses led to the conclusion that a health hazard may exist, especially after application of high rates of relatively toxic pesticides which easily penetrate the skin.
Agriculture↗
Lung function of welders of zinc-coated mild steel: cross-sectional analysis and changes over five consecutive work shifts.
Spirometric lung-function measurements were conducted 5 days before and after the work shift of 11 welders of zinc-coated steel, ten nonwelders who were indirectly exposed to welding fumes, and 17 controls. The exposure to dust and zinc of all participants was monitored personally using PAS-6 samplers. Geometric mean concentrations for welders were 0.91 mg/m3 (dust) and 34.0 micrograms/m3 (zinc). Cross-sectional analysis of Monday morning values showed no differences in lung-function parameters between groups. However, the number of years the participants were engaged in welding was of borderline statistical significance and correlated negatively with values of FEV1 and FEV1/FVC. Changes in lung function over a work shift or a working week were not related to the exposure level.
Adult↗