PubMed Health⌕ Search

Biomedical subjects

H Nikawa

Publications and source records attributed to H Nikawa.

At least 37 records · Page 2Linked to original sources

Sub-therapeutic exposure to polyene antimycotics elicits a post-antifungal effect (PAFE) and depresses the cell surface hydrophobicity of oral Candida albicans isolates.

Post-antifungal effect (PAFE) is defined as the suppression of growth that persists following limited exposure of fungi to antimycotics and subsequent removal of the drug. The fungal pathogen Candida albicans is the major aetiologic agent of oral candidosis, and the cell surface hydrophobicity (CSH) of this yeast is considered a critical factor contributing to its colonisation potential. As the concentration of topically prescribed antifungals reach sub-therapeutic levels at dosage intervals, the study of the polyene-induced PAFE and its impact on the CSH of oral C. albicans should be of clinical relevance. Hence the aims of this investigation were to measure the PAFE and CSH of 12 isolates of C. albicans following limited exposure (1 h) to nystatin and amphotericin B and also to investigate the ultrastructural features of yeast cells following such antifungal exposure. The yeasts were exposed to sub-lethal concentrations of nystatin (x2 MIC) and amphotericin B (x2 MIC) for a period of 1 h. Following subsequent removal of the drug, the PAFE and the CSH of the isolates were assessed by a turbidometric measurement of growth and a biphasic aqueous-hydrocarbon assay, respectively. The mean duration of PAFE of nystatin and amphotericin B were 5.99 (+/-0.49) h and 8.73 (+/-0.93) h, respectively, while the reduction in CSH following exposure to these drugs were 17.32% (P<0.05 for 83% of the isolates) and 14.26% (P<0.05 for 66% of the isolates), respectively. On scanning electron microscopy the exposed cells were seen to undergo collapse of the internal cell membrane, leaving an intact cell wall, while a proportion of cells were deflated. Some cells showed intense puckering of the cell wall, resulting in a mulberry appearance. Taken together, these data elucidate additional mechanisms by which polyene antimycotics may operate in vivo to suppress candidal pathogenicity.

Amphotericin B↗

Interactions between thermal cycled resilient denture lining materials, salivary and serum pellicles and Candida albicans in vitro. Part I. Effects on fungal growth.

In the present study, the growth of a single isolate of Candida albicans on seven saliva-, serum-coated or protein free (uncoated), thermocycled (4-70 degrees C for 1 min, respectively; 0, 1000 and 10 000 times) commercial resilient lining materials was investigated by monitoring pH changes in growth media. The inhibitory effect of the tissue conditioners on fungal growth was observed using three parameters, i.e. (i) the delay in the onset of the rapid decline in pH, (ii) the reduction in the rate of pH change and (iii) the pH minima reached. In the case of control soft liners (not thermocycled and uncoated), the antifungal effect appeared to depend upon the type of commercial soft liner used. Thus, an initial delay in pH decline and a very high pH minima were observed with fluoric and heat-cured silicone materials. High pH minima were also observed with cold-cured acrylic soft liners, whereas cold-cured silicone materials did not significantly differ from heat-cured acrylic resin (P>0.05). However, the antifungal effect of the materials was significantly reduced both by thermal cycling (ANOVA, P<0.01) and a layer of protein coating (saliva, P<0.05; serum, P<0.01). These results, taken together, suggest that the ageing of the materials and the biological fluids of the host, particularly serum, promote yeast growth on soft lining materials.

Analysis of Variance↗

Interactions between thermal cycled resilient denture lining materials, salivary and serum pellicles and Candida albicans in vitro. Part II. Effects on fungal colonization.

In the present study, the growth of a single isolate of Candida albicans on saliva-, serum-coated or protein free (uncoated), thermocycled (4-70 degrees C for 1 min, respectively; 0, 1000 and 10 000 times) seven commercial soft lining materials were investigated, by adenosine triphosphate (ATP) analysis. In the case of control resilient liners (not thermocycled and uncoated), the fungal colonization appeared to depend upon the type of commercial resilient liner used. Thus, the lowest colonization was observed with fluoric and heat-cured silicone materials, cold-cured silicone materials, except for one product, and heat-cured acrylic resin exhibited the highest colonization capacity, and cold-cured acrylic resilient liners exhibited the intermediate. However, the fungal colonization on the materials was significantly promoted both by thermal cycling (ANOVA, P<0.01) and a layer of protein coating (saliva, P<0.01; serum, P<0.01). These results, taken together, suggest that the ageing of the materials and the biological fluids of the host promote yeast colonization on resilient lining materials.

Acrylic Resins↗

Effect of serum concentration on Candida biofilm formation on acrylic surfaces.

The biofilm formation of the oral fungal pathogen Candida on denture acrylic strips coated with saliva, serum and, saliva-serum pellicle were examined in vitro using Candida albicans (four isolates), Candida glabrata (three isolates) and Candida tropicalis (three isolates). The degree of biofilm activity varied depending upon both the isolate and the pellicle. Significantly increased biofilm activity on the pellicle (particularly serum)-coated strips was observed with three isolates of C. albicans and another of C. glabrata on protein-coated acrylics, with increasing concentration of serum in the pellicle. Similar trends were observed with one isolate of C. albicans and C. glabrata, although the effects of pellicles were not significant. In contrast, with all three isolates of C. tropicalis and a single isolate of C. glabrata, although the biofilm activity on the protein-free control strips was significantly higher than that of saliva-coated strips, the increase in activity of pellicle-admixed biofilm depended upon the serum concentration. Candidal biofilm formation on acrylic surfaces is essentially promoted with increasing concentration of serum in the pellicle. This suggests that inflammation in the oral environment would facilitate fungal colonization on denture acrylic.

Acrylic Resins↗

In vitro susceptibility of Candida species to lactoferrin.

Lactoferrin is an antimicrobial protein present in human mucosal secretions as well as saliva. As there is no information on the relative fungicidal activity of human and bovine lactoferrin, an oral isolate of Candida albicans was studied for its susceptibility to these two proteins. Exposure to a concentration of 20 micrograms ml-1 of either HLF or BLF at 37 degrees C inactivated the yeast to the same degree irrespective of the incubation time of 45, 90 or 150 min. A similar study, using 20 micrograms ml-1 BLF and an incubation time of 150 min, elicited varying anticandidal activity against 35 isolates belonging to six different Candida species. Thus, BLF was fungicidal for the six Candida species in the following decreasing order, C. tropicalis > C. krusei > C. albicans > C. guilliermondii > C. parapsilosis > C. glabrata; the latter being the most resistant. These Candida species also demonstrated significant intra-species variation in susceptibility to the protein (P < 0.05). When the yeast cells exposed to BLF were examined by cryo-scanning electron microscopy, profound cell wall changes such as cell surface blebs, swelling and cell collapse were noted. These findings suggest that lactoferrin, a constituent of saliva, may differentially modulate the carriage of Candida species in the oral cavity.

Animals↗

Occlusal force distribution on the dental arch during various levels of clenching.

The purpose of this study was to explore the occlusal force distribution on the dental arch in the intercuspal position and to evaluate the relationship between the clenching strength and the occlusal force distribution. These variables were recorded using the Dental Prescale System in 16 healthy young adults. The number of tooth contacts, occlusal force and occlusal contact area increased linearly as clenching strength increased. The distribution of the occlusal force was greatest at the molar region followed by the premolar and anterior teeth region. The proportion of occlusal force (occlusal force at each region/total occlusal force) on molar regions increased as clenching strength increased. On the contrary, the proportion of occlusal force on the premolar and anterior teeth regions decreased as clenching strength increased. These findings suggest that control of occlusal force is important in diagnosis of the nature of occlusal contacts.

Adult↗

Incidence of occlusal contacts with complete dentures during mastication using a 6-channel telemetry system: preliminary measurements.

The purpose of this study was to observe the incidence of occlusal contact with complete dentures during mastication using a 6-channel telemetry system whose accuracy had been improved. The telemetry system consisted of the transmitter unit and the receiver unit. The transmitter unit was embedded in the lower complete denture. This system detects occlusal contacts by the shift of frequency in 100 kHz. The transmitter allowed 6 channels for the occlusal contacts. The data was telemetered by a time division multiplex communication method. A special switch was designed to measure excursive movement on the occlusal surface. After careful occlusal adjustment, the special switches were inserted in the lower first molars. On the basis of preliminary measurements on a 64-year-old edentulous male, it appears that the width of the gliding on the occlusal surface at the lower first molar was mostly 0.2-1.2 mm and the majority of the excursive movements ended at the centric occlusal position.

Dental Occlusion↗

Effects of modified pellicles on Candida biofilm formation on acrylic surfaces.

The role of saliva or serum proteins, such as mucin, fibronectin (FN) and mannan-binding protein, on Candida biofilm formation was investigated. Supplementation of saliva with FN had no significant effect on biofilm formation. In contrast, biofilm formation on either mucin-coated or FN-coated acrylic surfaces was significantly less than that of the control. These results suggest that salivary mucin or FN alone does not facilitate biofilm formation of Candida. Supplementation of serum with FN increased biofilm formation of C. glabrata compared with the control. Pretreatment of serum with anti-FN monoclonal antibody significantly reduced biofilm formation, as did pretreatment of serum with anti-mannan-binding protein monoclonal antibody or Con-A. Therefore, Candida biofilm formation on acrylic surfaces appears to be a complex phenomenon involving a multiplicity of proteins operating intraorally.

Acrylates↗

Rheology of tissue conditioners.

STATEMENT OF PROBLEM: Tissue conditioners can be used to condition abused tissues, record functional impressions, make temporary relinings, and for other clinical applications, mainly because of their specific viscoelasticity. However, little information is available on the rheology of the materials, manipulation, and suitability for various clinical applications. PURPOSE: This study evaluated the gelation times, the viscoelastic properties after gelation of tissue conditioners, and the influence of the powder/liquid (P/L) ratio. MATERIAL AND METHODS: Ten tissue conditioners were used and gelation times were obtained with an oscillating rheometer. A series of stress relaxation tests were also conducted to evaluate the viscoelastic properties after gelation and the changes with the passage of time by means of Maxwell model analogies. RESULTS: Significant differences were found in the gelation times and flow properties after gelation among the materials mixed with the P/L ratios recommended by the manufacturers. The flow properties tended to increase with time of storage. Large differences in the limits of the clinically acceptable P/L ratios and the adjustable limits of elasticity and viscosity by altering P/L ratios were found among the materials. CONCLUSIONS: The results suggested that each material should be selected according to each clinical purpose because of the wide ranges of viscoelastic properties and changes in viscoelasticity with time among the materials. Furthermore, gelation times and the viscoelastic properties after gelation can be controlled to improve handling and suit various applications by altering the P/L ratios within the acceptable limits.

Analysis of Variance↗

The effect of saliva or serum on Streptococcus mutans and Candida albicans colonization of hydroxylapatite beads.

OBJECTIVE: Several recent reports imply the possibility of cariogenicity of denture plaque containing Candida albicans. Hence the purpose of this study was to investigate the effects of salivary and serum pellicles on C. albicans and Streptococcus mutans colonization on hydroxylapatite beads. METHODS: The colonization of three isolates of C. albicans and two isolates of S. mutans was examined by the use of a bioluminescent adenosine triphosphate (ATP) assay based on the firefly luciferase-luciferin system. RESULTS: In the preliminary study, a good correlation was observed between the cell number and ATP amount of each isolate tested, and the results yielded a level of significance (P < 0.001; Student's t-test), confirming the validity of this method. When the relative ATP content of the 48 h colonization of both isolates of S. mutans were compared, a saliva pellicle was significantly more effective in promoting bacterial colonization than either uncoated or serum pellicle (ANOVA; P < 0.01). In contrast, in the case of colonization of C. albicans isolates, a serum pellicle was significantly more effective in promoting the colonization of C. albicans GDH 18 and GDH 19, than both uncoated specimens and saliva pellicle (ANOVA; P < 0.01). Similar trends were observed with C. albicans GDH 16, though significant differences were not observed (ANOVA; P > 0.05). CONCLUSION: The results suggest that the mechanism involved in fungal colonization on hydroxylapatite (HAP) should be different from that of mutans streptococci.

Adenosine Triphosphate↗

Denture plaque--past and recent concerns.

OBJECTIVE: This paper critically reviews the history of denture plaque and identifies some concerns with the presence of Candida in the mouth. DATA SOURCES: This review covers literature sources related to Candida albicans and its relationship to denture plaque. STUDY SELECTION: The articles selected for this review are from referred journals and describe C. albicans and its relationship to oral, gastrointestinal and pleuropulmonary infections. The relationship to caries, root caries and periodontal disease is also covered. CONCLUSIONS: Denture plaque containing Candida could cause not only oral candidiasis, like oral thrush or denture-induced stomatitis, but also caries, root caries and periodontitis of abutment teeth. However, there is only limited experimental evidence or information available on the cariogenicity of Candida. The continuous swallowing or aspiration of micro-organisms from denture plaque exposes patients, particularly the immunocompromised host or medicated elderly, to the risks of unexpected infections. The term, 'denture plaque' has been used throughout the review. However, the term 'plaque on denture' should be used because the microbial flora and its pathogenicity of denture plaque resembles those of plaque formed on the tooth surface, so called dental plaque. In addition, the term 'denture related stomatitis' would be preferable to 'denture induced stomatitis', since the inflammation of (palatal) mucosa is not induced by the denture, but by wearing the denture or by plaque on the denture.

Aged↗

Viscoelastic properties of tissue conditioners--influence of molecular weight of polymer powders and powder/liquid ratio and the clinical implications.

The effect of the molecular weight of polymer powders and the polymer powder/liquid ratio on the viscoelastic properties after gelation of tissue conditioners was studied by means of a stress relaxation test. The results are summarized as follows. The lower-molecular-weight polymer powders produced the larger flow after gelation especially at long times. The use of a lower powder/liquid ratio produced a greater flow after gelation at both short times and long times. The difference in the molecular weight of polymer powders and the powder/liquid ratio was found to have no influence on changes in viscoelastic properties with the passage of time. It would be possible to control the viscoelastic properties of tissue conditioners suitable for each clinical purpose by making variations in composition and structure.

Dibutyl Phthalate↗

Quantification of thigmotropism (contact sensing) of Candida albicans and Candida tropicalis.

To quantify the thigmotropism, we adapted the our previous method using a chemotaxifilter system in combination with a bioluminescent adenosine triphosphate (ATP) assay based on firefly luciferase-luciferin system and analyzed the relationship between the ability of germ tube formation and thigmotropism of C. albicans and C. tropicalis. Both the ability to form germ tube and the amount of hyphae exhibiting thigmotropism varied depending upon both the species and strains of Candida. C. albicans formed more germ tubes than C. tropicalis. A good correlation was observed between the ability to form a germ tube and the capacity for thigmotropism, and the results gave a level of significance (p < 0.05). Further, SEM observation revealed that relatively long hyphae of C. tropicalis with penetrated through the pores of filter membrane. This phenomenon may be of importance in the development of pathogenesis of C. tropicalis as well as C. albicans.

Candida↗

Effects of dietary sugars and, saliva and serum on Candida bioflim formation on acrylic surfaces.

The effect of two dietary sugars, glucose and galactose, on biofilm formation of the oral fungal pathogen Candida on denture acrylic strips coated with saliva and serum pellicles was examined in vitro using Candida albicans (3 isolates), C. glabrata (2 isolates) and C. tropicalis (2 isolates). The degree of biofilm activity was affected by both the dietary sugar and the nature of the pellicle (ANOVA, p < 0.01). With most isolates the glucose grown yeasts demonstrated significantly more bioflim activity than the galactose grown fungi, in the presence of pellicles (ANOVA, p < 0.01 or P < 0.01). In contrast, one isolate of galactose-grown yeast elicited significantly higher biofilm activity than glucose-grown yeasts on the control strips (ANOVA, p < 0.01). Taken together, these results imply that a saliva or a serum pellicle, and the carbon source in the environment, act a complex manner modulating Candida bioflim formation.

Acrylic Resins↗

Effects of salivary or serum pellicles on the Candida albicans growth and biofilm formation on soft lining materials in vitro.

The effects of salivary or serum pellicle on Candida albicans growth, biofilm formation and cavitation on the soft lining materials were examined. Both saliva and serum pellicles reduced the antifungal effects of soft liners. The fungal biofilm formation on these materials varied depending upon both the materials tested and protein-coats, and the pellicles which significantly enhanced the biofilm formation. Similarly, the pellicles enhanced the firm colonization and hyphal invasion of the yeasts on the specimens, although the cavitation appeared to be regulated by the plasticizer used. These results suggest that the interactions between proteinaceous pellicle, tissue conditioners and fungi are complex. They also suggest that denture pellicles facilitate fungal plaque formation onto soft lining materials through several mechanisms such as reduction of the antifungal effects of soft liners, facilitation of biofilm formation, firm colonization and hyphal invasion. In addition, the composition of the materials is also involved in the susceptibility to the fungi.

Biofilms↗

Antifungal effect of zeolite-incorporated tissue conditioner against Candida albicans growth and/or acid production.

A new antimicrobial material, Ag-zeolite (Zeomic), was combined with a commercial tissue conditioner (GC-Soft Liner (GC); 1-5%) and, through monitoring the pH of the growth medium, examined for effects on the in vitro growth and/or acid production of Candida albicans on protein-free and saliva-coated specimens. The effect of incorporation of this agent on the physical property of the lining material was also examined according to the ISO penetration test. Comparison studies were carried out using GC, Coe Comfort (CC) or undecylenate combined GC (1-5%) specimens. Although the pH changes in the media varied depending upon the materials on which the Candida was grown, reverse sigmoidal pH curves were observed with most samples. As compared with GC, the soft lining materials showed, to some extent, an inhibitory effect on the acid production and/or the growth of C. albicans. These inhibitory effects consisted of a delay in the onset of rapid pH decline, decreases in the rate of pH change and increases in minimum pH. In most cases, the inhibitory effects of test specimens were dose-dependent, and zeolite specimens showed a significantly higher antifungal effect, followed by CC and undecylenate-combined GC; GC showed the least antifungal effect. The inhibitory effects of these materials on fungal growth were decreased by the presence of a saliva-coat, particularly with zeolite specimens and CC. However, four of eight 5%-Zeomic specimens still exhibited perfect growth inhibition in the presence of the salivary pellicle. Furthermore, test specimens containing 2-5% Zeomic showed a significantly greater effect on the delay in rapid decline of pH, as compared with the other specimens examined. In addition, the significantly higher minimum pH was observed where the yeasts were grown on 4%- and 5%-Zeomic specimens. The physical properties of all the test specimens conformed with the ISO standard as examined by penetration test. These results taken together suggest that an antimicrobial zeolite-combined tissue conditioner would be a potential aid in denture plaque control.

Acids↗

Composition and effect of denture base resin surface primers for reline acrylic resins.

This study investigated the effect of resin surface primers for reline acrylic resins on the surface texture of denture base resin by use of scanning electron microscopy. Analysis of the composition of the primers was also conducted. The composition of the primers was classified into three groups: solvent based, monomer based, and monomer and polymer based. Scanning electron microscopic observation revealed various effects of the primers on the denture base resin surface, which depended on the composition of primers.

Acetone↗

Modulation of the anti-Candida activity of apo-lactoferrin by dietary sucrose and tunicamycin in vitro.

The sensitivity to apo-lactoferrin (apo-LF) of two oral isolates each of Candida albicans and C. krusei preincubated in either sucrose- or tunicamycin-supplemented media was investigated. Known apo-LF-sensitive isolates of both C. albicans and C. krusei demonstrated significantly increased resistance to apo-LF when preincubated in sucrose-supplemented media, but such preincubation had no effect on an apo-LF-resistant isolate of C. albicans, irrespective of the sugar concentration in the medium. Surprisingly, an apo-LF-resistant isolate of C. krusei demonstrated increased susceptibility to apo-LF when preincubated in sucrose. Further, when preincubated with tunicamycin, a chemical that interferes with candidal cell-wall formation, the susceptibility to apo-LF of the resistant isolates increased significantly. These results, when extrapolated in vivo, imply that dietary sucrose may diminish the anticandidal potency of salivary lactoferrin. However, the aberrant behaviour of a single isolate of C. krusei under these circumstances is possibly due to the different cell-wall structure of this yeast and needs to be further investigated.

Apoproteins↗