PubMed Health⌕ Search

Biomedical subjects

H T Aro

Publications and source records attributed to H T Aro.

At least 19 recordsLinked to original sources

Molecular basis for action of bioactive glasses as bone graft substitute.

Bone grafting procedures are undergoing a major shift from autologous and allogeneic bone grafts to synthetic bone graft substitutes. Bioactive glasses are a group of synthetic silica-based bioactive materials with bone bonding properties first discovered by Larry Hench. They have several unique properties compared with other synthetic bioresorbable bioactive ceramics, such as calcium phosphates, hydroxyapatite (HA) and tricalcium phosphate (TCP). Bioactive glasses have different rates of bioactivity and resorption rates depending on their chemical compositions. The critical feature for the rate of bioactivity is a SiO2 content < 60% in weight. In vivo, the material is highly osteoconductive and it seems to promote the growth of new bone on its surface. In a recent study, the activity of the material was found even to overshadow the effect of BMP-2 gene therapy. In vivo, there is a dynamic balance between intramedullary bone formation and bioactive glass resorption. Recent studies of molecular biology have shown that bioactive glass induces a high local turnover of bone formation and resorption. Many osteoporotic fracture patients are candidates for concurrent treatment with bisphosphonates and bioceramic bone graft substitutes. Since osteopromotive silica-based bioactive glasses induce accelerated local bone turnover, adjunct antiresorptive agents may affect the process. However, a recent study showed that an adjunct antiresorptive therapy (zoledronic acid) is even beneficial for bone incorporation of bioactive glass. Based on these observations, bioactive glasses are a promising group of unique biomaterials to act as bone graft substitutes.

Biocompatible Materials↗

RSA applications in monitoring of fracture healing in clinical trials.

Radiostereometric analysis (RSA) was originally developed as a method for performing highly accurate three-dimensional measurements in vivo over time from sequential radiographs. Since its introduction over twenty years ago, the RSA method has proven itself as a powerful tool with numerous orthopaedic applications. RSA has been used extensively in studies of prosthetic fixation and has been shown to be the method of choice for these studies. RSA has, however, also been successfully applied to a limited number of studies examining fracture healing, namely in fractures of the radius, ankle, tibial plateau, trochanter and femoral neck, as well as studies of bone healing following spinal fusion and tibial osteotomies. RSA follow-up of a fracture will provide definitive demonstration of the exact time of union, i.e. the achievement of fracture stability. This information can be invaluable in randomized clinical trials of fracture treatment. Phantom model studies have proven useful for effective preoperative planning and interpretation of RSA results. The RSA method is a highly accurate, precise and safe objective method for studying fracture healing in clinical trials. The RSA method may serve as a scientific tool to accurately evaluate the significance of supporting novel biomaterials for the early stability and the rate of healing in fractures.

Fracture Healing↗

Combined effect of BMP-2 gene transfer and bioactive glass microspheres on enhancement of new bone formation.

Adenovirus-mediated recombinant human BMP-2 (RAdBMP-2) gene transfer has been found to have significant osteoinductive properties. The hypothesis of the current study was that bioactive glass surface could provide favorable osteoconductive conditions for cellular action of osteoinductive RAdBMP-2 gene transfer. In the rat proximal tibia, a portion of the medullary cavity was evacuated and filled with bioactive glass microspheres and injected with adenovirus carrying the human BMP-2 gene (BG/RAdBMP-2). Control defects filled with BG microspheres were injected with adenovirus carrying the LacZ reporter gene (BG/RAdLacZ) or saline (BG). Empty control defects were also used. Bone healing response was analyzed at 4 days, and at 2 and 8 weeks by radiography, peripheral quantitative computed tomography (pQCT), histomorphometry, and backscattered electron imaging of scanning electron microscopy (BEI-SEM) equipped with energy dispersive X-ray analysis (EDXA). In empty controls, the amount of intramedullary new bone peaked at 2 weeks, whereas defects filled with bioactive glass with and without RAdBMP-2 gene transfer showed a constant time-related increase of intramedullary new bone. At 8 weeks, there was significantly more new bone in defects treated with BG and RAdBMP-2 than in defects left to heal without filling (p < 0.001). Compared with the other controls (BG only or BG/RAdLacZ), the difference was not significant. In the current model, the osteopromotive effect of bioactive glass microspheres appears synergistic with the osteoinductive action of BMP-2 gene transfer, or one overshadows the other, as no additive effect was observed.

Animals↗

Bone defect repair in immobilization-induced osteopenia: a pQCT, biomechanical, and molecular biologic study in the mouse femur.

The present study was carried out to determine whether immobilization-induced (Im) osteopenic bone possesses the same reparative capacity as normal healthy bone. Furthermore, the effects of mechanical loading versus immobilization on bone defect healing were studied. Three-week cast-immobilization was used to induce local osteopenia in mice. A standardized metaphyseal bone defect of the distal femur was created unilaterally both in immobilization-induced (Im) osteopenic mice and in nonimmobilized (Mo) age-matched control animals. After creation of the bone defect, the animals in both groups were further divided into two groups: 3-week cast-immobilization (Im-Im and Mo-Im) groups, and unrestricted weight-bearing (Im-Mo and Mo-Mo) groups. The healing process was followed up to 3 weeks using RNA analysis, histomorphometry, biomechanical testing, and pQCT measurements. At 3 weeks of healing without immobilization, bone mineral density (BMD), as well as bone bending stiffness and strength were higher in normal (Mo-Mo) than in osteopenic (Im-Mo) bone. Although the levels of mRNAs characteristic to chondrocytes (Sox9 and type II collagen), hypertrophic chondrocytes (Type X collagen), osteoblasts (type I collagen and osteocalcin), and osteoclasts (cathepsin K) during the bone defect healing exhibited similarities in their expression profiles, mechanical loading conditions also caused characteristic differences. Mechanical loading during healing (Mo-Mo group) induced stronger expression of cartilage- and bone-specific genes and resulted in higher BMD than that seen in the cast-immobilized group (Mo-Im). In biomechanical analysis, increased bending stiffness and strength were also observed in animals that were allowed weight-bearing during healing. Thus, our study shows that bone healing follows the same molecular pathway both in osteopenic and normal bones and presents evidence for reduced or delayed regeneration of noncritical size defects in immobilization-induced osteopenic bone.

Animals↗

Efficacy of bioabsorbable antibiotic containing bone screw in the prevention of biomaterial-related infection due to Staphylococcus aureus.

Impregnation of antimicrobial agents within biodegradable orthopedic implants provides a possibility for local antimicrobial prophylaxis of biomaterial-related infections. The objective of this study was to evaluate the efficacy of a bioabsorbable ciprofloxacin containing bone screw (Ab-PLGA) in the prevention of biomaterial-related infection due to Staphylococcus aureus in a rabbit model. Animals in Group I (n=8) received a Ab-PLGA screw contaminated with S. aureus, while animals in Group II (n=8) received a stainless steel (SS) screw contaminated with S. aureus. In two negative control groups, the animals received a Ab-PLGA screw (Group III, n=4) or a SS screw (Group IV, n=4) without bacterial contamination. 18F-FDG-PET imaging, performed at 6 weeks, was applied as a novel quantitative in vivo imaging modality of implant-related infection. Infection was verified by swab cultures, direct cultures of the retrieved implant, and quantitative cultures of pulverized bone. The concentrations of ciprofloxacin in serum and local bone tissue were determined by a high performance liquid chromatographic (HPLC) method with fluorescence (FLD) detection. In the group of contaminated Ab-PLGA screws, all cultures were negative. In the group of contaminated SS screws, all cultures of retrieved implants and six cultures out of eight of pulverized bone were positive for inoculated S. aureus. In negative control groups, all cultures were negative except one contaminant (S. cohnii) found in a SS screw culture. Verified infection of contaminated SS screws was collaborated by the increased 18F-FDG-PET uptake (P=0.004 compared with the group of contaminated Ab-PLGA screws). The mean bone tissue concentration of ciprofloxacin varied from 2.54 to 0.83 microg/g bone as a function of distance from the implantation site. The serum concentration of ciprofloxacin remained undetectable and below the resolution of the analytic method (<5.0 ng/ml). This study confirmed the in vivo efficacy of bioabsorbable antibiotic containing bone screw in the prevention of biomaterial-related infection due to S. aureus.

Absorbable Implants↗

Comparison of digital and conventional radiostereometric image analysis in an ankle phantom model.

BACKGROUND AND AIMS: Radiostereometric analysis (RSA) allows accurate three-dimensional measurements of micromotion in skeletal structures. The current RSA techniques are based on the analysis of scanned plain films. This study was undertaken to compare digital filmless RSA technique to conventional scanning technique using a phantom model of the ankle mortise. MATERIAL AND METHODS: In the first experiment, the relative displacement of the markers inserted to the fibula in relation to the markers inserted to the tibia was studied by means of double examinations and the precision of DICOM images were compared to scanned images of printed radiographs. In the second experiment, the film pair of double examination was re-imported or re-scanned and self-compared in order to show merely the error related to the image processing. RESULTS: The precision of RSA using scanned images of printed radiographs was compatible to DICOM images. However, the mean error of rigid body fitting (ME) values were significantly lower in use of DICOM images compared with scanned radiographs, indicating less deformation of rigid body segments in filmless analysis. CONCLUSIONS: Precision of the RSA method was improved under the completely filmless environment. Therefore, this technique can be recommended for clinical studies of radiostereometric analysis.

Ankle Joint↗

Molecular biologic comparison of new bone formation and resorption on microrough and smooth bioactive glass microspheres.

In a recent in vitro study, chemical microroughening of a bioactive glass surface was shown to enhance attachment of MG-63 osteoblastic cells to glass. The current study was designed to delineate the effects of microroughening on the gene expression patterns of bone markers during osteogenesis and new bone remodeling on bioactive glass surface in vivo. With the use of a rat model of paired comparison, a portion of the medullary canal in the proximal tibia was evacuated through cortical windows and filled with microroughened or smooth bioactive glass microspheres. The primary bone-healing response and subsequent remodeling were analyzed at 1, 2, and 8 weeks, respectively, by radiography, pQCT, histomorphometry, BEI-SEM, and molecular biologic analyses. The expression of various genes for bone matrix components (type I collagen, osteocalcin, osteopontin, osteonectin) and proteolytic enzymes (cathepsin K, MMP-9) were determined by Northern analysis of the respective mRNAs. Paired comparison showed significant differences in the mRNAs levels for specific bone matrix components at 2 weeks: osteopontin was significantly higher (p =.01) and osteonectin significantly lower (p =.05) in bones filled with microroughened microspheres than in those filled with smooth microspheres. Bones filled with microrough microspheres also showed significantly increased ratios of cathepsin K and MMP-9 (both markers of osteoclastic resorption) to type I collagen (p =.02 and p =.02, respectively) at 2 weeks and a significantly increased expression of MMP-9 at 8 weeks (p =.05). The pQCT, histomorphometric, and BEI-SEM analyses revealed no significant differences in the pattern of bone-healing response. Based on these results, microroughening of a bioactive glass surface could trigger temporal changes in the expression of specific genes especially by promoting the resorption part of new bone-remodeling processes. Future studies are needed to evaluate if the observed changes of gene expression are directly related to the microrough surface of any biomaterial or are biomaterial specific.

Animals↗

Characterization of microrough bioactive glass surface: surface reactions and osteoblast responses in vitro.

The current study characterized the in vitro surface reactions of microroughened bioactive glasses and compared osteoblast cell responses between smooth and microrough surfaces. Three different bioactive glass compositions were used and surface microroughening was obtained using a novel chemical etching method. Porous bioactive glass specimens made of sintered microspheres were immersed in simulated body fluid (SBF) or Tris solutions for 1, 6, 24, 48, or 72 h, and the formation of reaction layers was studied by means of a scanning electron microscope/energy dispersive X-ray analysis (SEM/EDXA). Cell culture studies were performed on bioactive glass disks to examine the influence of surface microroughness on the attachment and proliferation of human osteoblast-like cells (MG-63). Cell attachment was evaluated by means of microscopic counting of in situ stained cells. Cell proliferation was analyzed with a nonradioactive cell proliferation assay combined with in situ staining and laser confocal microscopy. The microroughening of the bioactive glass surface increased the rate of the silica gel layer formation during the first hours of the immersion. The formation of calcium phosphate layer was equal between control and microroughened glass surfaces. In cell cultures on bioactive glass, the microrough surface enhanced the attachment of osteoblast-like cells but did not have an effect on the proliferation rate or morphology of the cells as compared with smooth glass surface. In conclusion, microroughening significantly accelerated the early formation of surface reactions on three bioactive glasses and had a positive effect on initial cell attachment.

Biocompatible Materials↗

Dynamic contrast-enhanced MR imaging and MR-guided bone biopsy on a 0.23 T open imager.

OBJECTIVE: To assess the feasibility of MR (magnetic resonance)-guided bone biopsies. DESIGN AND PATIENTS: Thirty-six consecutive patients with known or suspected benign or malignant bone lesions underwent comprehensive MR imaging. A dynamic contrast-enhanced sequence followed by stationary T1-weighted sequences were obtained and MR-guided bone biopsy of the tumor at the site with fastest enhancement was performed using an open 0.23 T MR imager. RESULTS: All MR-guided bone biopsies samples were estimated to be sufficient by the pathologists. The biopsy specimens were diagnostic in 34 of 36 cases. CONCLUSION: MR-guided bone biopsies combined with dynamic contrast-enhanced imaging are feasible and safe for the diagnostic investigation of equivocal bone lesions.

Adolescent↗

Creation of microrough surface on sintered bioactive glass microspheres.

Bioactive glasses are surface-active, generally silica-based, synthetic materials that form a firm chemical bond to bone. The aim of this study was to further enhance the bioactivity of glasses by creating a microroughness on their surface. Microroughness increases potential surface area for cell attachment and biomaterial-cell interactions. Three bioactive glasses of different composition were studied. Each material was flame-sprayed into microspheres, and a selected fraction of the spheres (250-300 microm) was sintered to form porous bioactive glass specimens. To create microrough surfaces, different acid etching techniques were tested. Atomic force microscopy (AFM) and back-scattered electron imaging of scanning electron microscopy (BEI-SEM) were used to characterize surface roughness. The degree of roughness was measured by AFM. A novel chemical-etching method, developed through intensive screening of different options, was found consistently to create the desired microroughness, with an average roughness value (R(a)) of 0.35-0.52 microm and a root mean-square roughness value (R(rms)) of 0.42-0.64 microm. Microroughening of the glass surface was obtained even in the internal parts of the porous glass matrices. Measured by BEI-SEM, the etching of a bioactive glass surface did not interfere with the formation of the characteristic surface reactions of bioactive glasses. This was confirmed by immersing the etched and control glass bodies in a simulated body fluid and tris(hydroxymethyl) aminomethane/HCl. The etching process did not significantly affect the mechanical strength of the sintered bioactive glass structures. Based on these experiments, it seems possible to create a reproducible microroughness of appropriate size on the surface of porous bioactive glass. The biologic benefits of such a surface treatment need to be validated with in vivo experiments.

Analysis of Variance↗

Pore diameter of more than 100 microm is not requisite for bone ingrowth in rabbits.

The optimal pore size for bone ingrowth is claimed to be 100-400 microm. With the use of a highly standardized experimental model, the present study reevaluated whether a pore size of 100 microm is the threshold value for bone ingrowth into porous structures under non-load-bearing conditions. Titanium triangle-shaped plates 250 or 500 microm thick were perforated with the use of a laser in order to create standard-sized holes ( 50, 75, 100, and 125 microm) in multiple rows. The amount of bone ingrowth through the implant holes was studied in the cancellous bone of the distal rabbit femur. Twelve weeks after implantation, detailed analysis of bone ingrowth was performed with computerized image analysis of backscattered electron imaging techniques of scanning electron microscopy. The results showed that the amount of ingrown new bone was independent of the pore size and implant thickness. The median value for bone ingrowth varied between 64 and 78%. A striking feature was the formation of secondary osteonal structures even in the smallest holes. Based on these results, there is no threshold value for new bone ingrowth in pore sizes ranging from 50 to 125 microm under non-load-bearing conditions.

Animals↗

Silica-based bioactive glasses modulate expression of bone morphogenetic protein-2 mRNA in Saos-2 osteoblasts in vitro.

A chemical exchange of the silica gel layer forming on the surface of bioactive glasses is thought to be the principal reaction for bone-bioactive glass bonding. The contribution of biological molecules on cell-bioactive glass interaction is largely unknown. To further analyze the mechanisms involved in efficient bone bonding to bioactive glass, Saos-2 osteoblastic cells with proven osteogenic phenotype were cultured for 4, 7 and 14 days on two bioactive glasses with different Si contents. Culture plates and dishes made of bioactive (BAG, 53 % SiO2), biocompatible (BCG, 58% SiO2) and control (GO) glasses were extensively conditioned with phosphate buffer and DMEM medium before seeding the cells. Northern hybridization was used for analysis of mRNA levels of collagen type I (Col-I), alkaline phosphatase (ALP) and bone morphogenetic protein-2 (BMP-2). A significant increase was observed in Col-I mRNA levels in cells grown on the two bioactive glasses when compared with those grown on controls at 4 and 7 days (p < 0.04). The mRNA level for ALP in the cultures of bioactive glasses-made plates and dishes was also increased over control at 7 days (p < 0.02) and remained this way between BAG and G0 at 14 days. Striking differences in BMP-2 mRNA levels existed between BAG and G0 plates and dishes at 7 days (p < 0.05). BMP-2 mRNA level in BAG group was higher than in BCG group at 4, 7 and 14 days, but without statistical significance. Saos-2 osteoblastic cells with strong ALP staining were mostly seen on BAG plates under a light microscope. In confocal microscopy, a bright FITC-stained F-actin ring was present in the cytoplasm of cells grown on BAG dish, demonstrating an active functional status. Stimulation of the expression of BMP-2 and other bone mRNAs by bioactive glasses in osteoblastic cells suggests biological involvement of bone related growth factors, peptides and cytokines in bone-bioactive glass bonding.

Alkaline Phosphatase↗

Cysteine proteinases in chondrosarcomas.

The aim of the present study was to define the role of cathepsins B, H, K, L and S in the pathogenesis of human chondrosarcomas. For this purpose 40 tumour samples obtained from 12 patients with the diagnosis of conventional chondrosarcoma were systematically investigated for the expression of cathepsin mRNAs by Northern hybridisation, and for immunohistochemical localisation of the proteins. Northern analysis demonstrated the highest levels of cathepsins B and L in a recurring grade 1 chondrosarcoma, and in a grade 3 chondrosarcoma and in fibrous histiocytomas. Increased expression of cathepsin K mRNA was seen in seven chondrosarcomas, as well as in control tumours; fibrous histiocytomas, osteosarcomas, enchondromas and a giant cell tumour of bone. Cathepsin L was immunolocalised within the large chondrocytes, while cathepsin K was predominantly localised in large multinucleated osteoclastic cells and in some hypertrophic chondrocytes. These results suggest that chondrosarcoma can be included in the growing list of tumours, where cathepsins may well be involved in tumour progression. The simultaneous upregulation of cathepsins B and L, together with matrix metalloproteinase-13, and the association of cathepsin K with negative prognostic parameters suggests that an aggressive biological behaviour of chondrosarcoma may be related to the synthesis of cysteine proteinases and activation of other proteolytic enzymes. If this turns out to be the case, cathepsin inhibitors could provide the much needed adjuvant therapy for chondrosarcomas.

Adult↗

A metaphyseal defect model of the femur for studies of murine bone healing.

A bone defect model was developed in the distal metaphysis of the femur for studies on bone healing in the mouse. The circular defect involving 20% of the bone circumference resulted in a 34% reduction in the bending moment compared to intact bone. The healing process was followed using histomorphometry, peripheral quantitative computed tomography (pQCT), biomechanical testing, and molecular biological analyses. Histologically, healing of the defect was characterized by filling of the medullary cavity with trabecular new bone during the first week of healing, and by closing of the cortical window by 6 weeks. Small areas of periosteal chondrogenesis were frequently observed during defect healing. In pQCT, bone mineral content (BMC) of the defect area approached that of intact control bone already by 3 weeks, reflecting the production of trabecular bone. Similarly, the bending strength and stiffness of the healing femur reached the level of intact control femur already at 3 weeks. Bone formation and remodeling was followed by Northern analyses, which demonstrated elevated mRNA levels for bone components (type I collagen and osteocalcin), and for osteoclastic enzymes (cathepsin K, matrix metalloproteinase-9, and tartrate-resistant acid phosphatase) throughout the healing period. Finally, the applicability of the defect model for gene therapy experiments was tested using adenovirus-mediated transfer of the LacZ reporter gene. Both histochemistry and mRNA analyses demonstrated that the gene was expressed in the repair tissue with the highest expression during the first week of healing. The present model thus provides a standardized environment for studies on induction and remodeling of trabecular new bone in normal and genetically engineered mice.

Animals↗

Expression of matrix metalloproteinases and tissue inhibitors of metalloproteinases in human chondrosarcomas.

The aim of the present study was to characterise the ability of malignant chondrosarcomas to invade normal bone by analysing their production of matrix metalloproteinases (MMPs) and tissue inhibitors of metalloproteinases (TIMPs). For this purpose 12 chondrosarcomas were investigated for the expression of mRNAs for several MMPs and all 4 TIMPs by Northern hybridisation, and for immunohistochemical localisation of the proteins. A characteristic finding of these analyses was increased expression of MMP-13, MMP-14 and TIMP-2 mRNAs in chondrosarcomas when compared with nonmalignant control samples. Individual chondrosarcomas also exhibited elevated levels of MMP-1, MMP-7 and MMP-9 mRNAs. The results of Northern hybridisations were supported by immunohistochemical stainings of the corresponding tumour areas for MMP-2, MMP-14 and TIMP-2, further suggesting that these may have prognostic value for determining whether individual chondrosarcomas are locally aggressive or have a probability of recurrence. Another finding of the present study was a marked heterogeneity in histologic appearance and gene expression of the chondrosarcomas, emphasising the importance of analysing several areas of these tumours to get representative results. These findings suggest that analysis of MMPs could be a useful diagnostic indicator in patients with cartilaginous tumours and could help in differentiating between a low-grade malignant chondrosarcoma and a benign growing enchondroma.

Adolescent↗

MR-guided core biopsies of soft tissue tumours on an open 0.23 T imager.

PURPOSE: To assess the feasibility of MR-guided soft tissue core biopsies on an open 0.23 T magnet. MATERIAL AND METHODS: Twenty-nine consecutive patients with known or suspected benign or malignant soft tissue tumours underwent MR imaging. A one-slice dynamic enhancement sequence was used to obtain an enhancement curve of the tumour. MR-guided core biopsy of the tumour was performed in the same session. RESULTS: All biopsies could be performed on an open 0.23 T magnet. Standard MR images and dynamic enhancement curves were used in deciding biopsy route and target. The MR-guided core biopsy specimens were sufficient for histopathological diagnosis in 27 of 29 cases. CONCLUSION: Open magnet configuration allows easy access to the patient and near real-time imaging guidance of soft tissue tumours. Minimally invasive MR-guided core biopsies of soft tissue tumours are feasible and help to avoid open surgical biopsies.

Adult↗

Accelerated turnover of metaphyseal trabecular bone in mice overexpressing cathepsin K.

This study is based on a hypothesis that overexpression of an osteoclast enzyme, cathepsin K, causes an imbalance in bone remodeling toward bone loss. The hypothesis was tested in transgenic (TG) mice harboring additional copies of the murine cathepsin K gene (Ctsk) identifiable by a silent mutation engineered into the construct. For this study, three TG mouse lines harboring 3-25 copies of the transgene were selected. Tissue specificity of transgene expression was determined by Northern analysis, which revealed up to 6-fold increases in the levels of cathepsin K messenger RNA (mRNA) in calvarial and long bone samples of the three TG lines. No changes were seen in the mRNA levels of other osteoclast enzymes, indicating that the increase in cathepsin K mRNA was not a reflection of activation of all osteoclast enzymes. Immunohistochemistry confirmed that cathepsin K expression in the TG mice was confined to osteoclasts and chondroclasts. Histomorphometry revealed a significantly decreased trabecular bone volume (BV), but, surprisingly, also a marked increase in the number of osteoblasts, the rate of bone turnover, and the amount of mineralizing surface (MS). However, monitoring of bone density in the proximal tibias of the TG mice with peripheral quantitative computed tomography (pQCT) failed to reveal statistically significant changes in bone density. Similarly, no statistically significant alterations were observed in biomechanical testing at the age of 7 months. The increases in parameters of bone formation triggered by increased cathepsin K expression is an example of the tight coupling of bone resorption and formation during the bone-remodeling cycle.

Animals↗

Expression of cathepsins B, H, K, L, and S and matrix metalloproteinases 9 and 13 during chondrocyte hypertrophy and endochondral ossification in mouse fracture callus.

Fracture repair provides an interesting model for chondrogenesis and osteogenesis as it recapitulates in an adult organism the same steps encountered during embryonic skeletal development and growth. The fracture callus is not only a site of rapid production of cartilage and bone, but also a site of extensive degradation of their extracellular matrices. The present study was initiated to increase our understanding of the roles of different proteolytic enzymes, cysteine cathepsins B, H, K, L, and S, and matrix metalloproteinases (MMPs) 9 and 13, during fracture repair, as this aspect of bone repair has previously received little attention. Northern analysis revealed marked upregulation of cathepsin K, MMP-9, and MMP-13 mRNAs during the first and second weeks of healing. The expression profiles of these mRNAs were similar with that of osteoclastic marker enzyme tartrate-resistant alkaline phosphatate (TRAP). The changes in the mRNA levels of cathepsins B, H, L, and S were smaller when compared with those of the other enzymes studied. Immunohistochemistry and in situ hybridization confirmed the predominant localization of cathepsin K and MMP-9 and their mRNA in osteoclasts and chondroclasts at the osteochondral junction. MMP-13 was present in osteoblasts and individual hypertrophic chondrocytes near the cartilage-bone interphase. In cartilaginous callus, the expression of cathepsins B, H, L, and S was mainly related to chondrocyte hypertrophy. During bone remodeling both osteoblasts and osteoclasts contained these cathepsins. The present data demonstrate that degradation and remodeling of extracellular matrices during fracture healing involves activation of MMP-13 production in hypertrophic chondrocytes and osteoblasts, and cathepsin K and MMP-9 production in osteoclasts and chondroclasts.

Animals↗