PubMed Health⌕ Search

Biomedical subjects

H Verachtert

Publications and source records attributed to H Verachtert.

At least 19 recordsLinked to original sources

Bioflavoring and beer refermentation.

Various techniques are used to adjust the flavors of foods and beverages to new market demands. Although synthetic flavoring chemicals are still widely used, flavors produced by biological methods (bioflavors) are now more and more requested by consumers, increasingly concerned with health and environmental problems caused by synthetic chemicals. Bioflavors can be extracted from plants or produced with plant cell cultures, microorganisms or isolated enzymes. This Mini-Review paper gives an overview of different systems for the microbial production of natural flavors, either de novo, or starting with selected flavor precursor molecules. Emphasis is put on the bioflavoring of beer and the possibilities offered by beer refermentation processes. The use of flavor precursors in combination with non-conventional or genetically modified yeasts for the production of new products is discussed.

Beer↗

Yeast flocculation: what brewers should know.

For many industrial applications in which the yeast Saccharomyces cerevisiae is used, e.g. beer, wine and alcohol production, appropriate flocculation behaviour is certainly one of the most important characteristics of a good production strain. Yeast flocculation is a very complex process that depends on the expression of specific flocculation genes such as FLO1, FLO5, FLO8 and FLO11. The transcriptional activity of the flocculation genes is influenced by the nutritional status of the yeast cells as well as other stress factors. Flocculation is also controlled by factors that affect cell wall composition or morphology. This implies that, during industrial fermentation processes, flocculation is affected by numerous parameters such as nutrient conditions, dissolved oxygen, pH, fermentation temperature, and yeast handling and storage conditions. Theoretically, rational use of these parameters offers the possibility of gaining control over the flocculation process. However, flocculation is a very strain-specific phenomenon, making it difficult to predict specific responses. In addition, certain genes involved in flocculation are extremely variable, causing frequent changes in the flocculation profile of some strains. Therefore, both a profound knowledge of flocculation theory as well as close monitoring and characterisation of the production strain are essential in order to gain maximal control over flocculation. In this review, the various parameters that influence flocculation in real-scale brewing are critically discussed. However, many of the conclusions will also be useful in various other industrial processes where control over yeast flocculation is desirable.

Fermentation↗

Microbial transformations of 2-substituted benzothiazoles.

The occurrence of benzothiazoles in the environment seems to be restricted to aquatic compartments and is mainly associated with the manufacture and use of the rubber additive 2-mercaptobenzothiazole (MBT) and its derivatives. Although data on benzothiazole biotransformations in natural environments at ppb and ppt levels are scarce, the unsubstituted benzothiazole (BT) and 2-hydroxybenzothiazole (OBT) are generally considered to be biodegradable, whereas 2-methylthiobenzothiazole is recalcitrant. The fungicide 2-thiocyanomethylthiobenzothiazole is assumed to be hydrolysed to MBT, which is then further methylated. At higher concentration levels, similar conclusions can generally be drawn. In addition, BT, MBT, 2-aminobenzothiazole and benzothiazole-2-sulphonate can be biodegraded, although side- and end-products may form. For BT and MBT, threshold concentration were reported above which inhibitory effects on biological treatment processes occur. Due to the limited availability of axenic bacterial cultures capable of benzothiazole mineralization, only the initial steps of the degradation pathways have been elucidated so far.

Bacteria↗

Flocculation and coflocculation of bacteria by yeasts.

Biotransformations in natural environments frequently involve interactions between microorganisms. Although there are many reports on the interactions between bacteria, interactions between yeasts and bacteria have not been extensively studied. Previously we reported on the flocculation and coflocculation of Pediococcus damnosus by Saccharomyces cerevisiae. Now we report that several other yeasts, such as Candida utilis, Dekkera bruxellensis, Hanseniaspora guilliermondii, Kloeckera apiculata, and Schizosaccharomyces pombe, induce flocculation with several industrially or medically relevant bacteria, including Bacillus subtilis, Pseudomonas aeruginosa, and Staphylococcus aureus. Candida utilis was one of the best flocculation inducers. The results are discussed with respect to interactions between yeasts and bacteria and their applications in industry and medicine.

Bacillus subtilis↗

Heterologous expression of the Bacillus pumilus endo-beta-xylanase (xynA) gene in the yeast Saccharomyces cerevisiae.

The endo-beta-xylanase-encoding gene (xynA) of Bacillus pumilus PLS was isolated from a genomic DNA library and the open reading frame (ORF) was inserted in expression vectors for the yeast Saccharomyces cerevisiae. Plasmid pFN3 harboured the xynA ORF fused to the yeast mating pheromone alpha-factor signal sequence (MFalpha1s) under the control of the alcohol dehydrogenase II gene promotor (ADH2P) and terminator (ADH2T) sequences. In plasmid pFN4, the MFalpha1S-xynA ORF was brought under the control of the phosphoglycerate kinase I gene promotor (PGK1p) and terminator (PGK1T) sequences. Autoselective, recombinant S. cerevisiae [fur1::LEU2] strains bearing pFN3 or pFN4 secreted functional endo-beta-xylanase when grown in complex medium. Enzymatic activities in the culture supernatants reached maximum levels of 8.5 nkat/ml and 4.5 nkat/ml, respectively. The temperature and pH optimum for both the bacterial and the recombinant xylanase were 58 degrees C and pH 6.2.

Bacillus↗

Coflocculation of Escherichia coli and Schizosaccharomyces pombe.

Several yeasts, such as Candida utilis, Dekkera bruxellensis, Hanseniaspora guilliermondii, Kloeckera apiculata, Saccharomyces cerevisiae and Schizosaccharomyces pombe, were found to coaggregate with Escherichia coli, but S. pombe showed much less coflocculation than the other yeasts (Peng et al. 2001)). S. pombe is known to have galactose-rich cell walls and we investigated whether this might be responsible for its different behavior by studying the wild-type TP4-1D, with a mannose to galactose ratio of 1 to 1.2, and the glycosylation mutant gms1delta (Man:Gal=1:0). The wild-type induced very low levels of coflocculation (3%) while gms1delta induced a remarkable amount of coflocculation (48%). Coflocculation of the mutant was inhibited by mannose but not affected by galactose or glucose. The S. cerevisiae mnn2 mutant, with a mannan structure similar to gms1delta, also showed a high degree of coflocculation (40%). However, S. cerevisiae mutant mnn9, with a mature core similar to S. pombe, showed decreased coflocculation (21.3%). Both these S. cerevisae mutants were sensitive to mannose inhibition. Coflocculation of E. coli and gms1delta also could be inhibited by gms1delta mannan and plant lectins, such as HHA, GNA and NPA, specific to either alpha-1-3- or alpha-1-6-linked mannosyl units. From these results we conclude that the E. coli lectins may have specificity for alpha-1-6- and alpha-1-3-linked mannose residues either in the outer chain or in the core of S. pombe, but in wild-type strains these mannose residues are shielded by galactose residues.

Carbohydrate Sequence↗

A transcriptional luxAB reporter fusion responding to fluorene in Sphingomonas sp. LB126 and its initial characterisation for whole-cell bioreporter purposes.

The promoter probe mini-Tn5-luxAB-tet was used to create a luxAB transcriptional fusion responding to fluorene in the fluorene utilising bacterium Sphingomonas sp. LB126. The mutant strain, named L-132, was impaired in fluorene utilisation and strongly emitted light upon addition of fluorene to the growth medium. L-132 was initially characterised and examined for its potential use as a whole-cell biosensor in the perspective of quantifying fluorene in environmental samples. Activity of the reporter gene as a response to fluorene was detectable after 30 min and was optimal after 4 h. A linear response to fluorene concentrations within the water solubility range was achieved, with a detection limit of 200 microg per litre. Besides fluorene, L-132 weakly responded to the polycyclic aromatic hydrocarbons phenanthrene and dibenzothiophene, whereas strong responses were obtained with 9-fluorenone, 9-hydroxyfluorene, phthalic acid and protocatechuic acid. The latter four compounds are metabolites formed in course of fluorene degradation, which suggested that a fluorene metabolite rather than fluorene itself was the true inducer of the luxAB fusion in L-132.

Artificial Gene Fusion↗

Decrease in cell surface galactose residues of Schizosaccharomyces pombe enhances its coflocculation with Pediococcus damnosus.

Pediococcus damnosus can coflocculate with Saccharomyces cerevisiae and cause beer acidification that may or may not be desired. Similar coflocculations occur with other yeasts except for Schizosaccharomyces pombe which has galactose-rich cell walls. We compared coflocculation rates of S. pombe wild-type species TP4-1D, having a mannose-to-galactose ratio (Man:Gal) of 5 to 6 in the cell wall, with its glycosylation mutants gms1-1 (Man:Gal = 5:1) and gms1Delta (Man:Gal = 1:0). These mutants coflocculated at a much higher level (30 to 45%) than that of the wild type (5%). Coflocculation of the mutants was inhibited by exogenous mannose but not by galactose. The S. cerevisiae mnn2 mutant, with a mannan content similar to that of gms1Delta, also showed high coflocculation (35%) and was sensitive to mannose inhibition. Coflocculation of P. damnosus and gms1Delta (or mnn2) also could be inhibited by gms1Delta mannan (with unbranched alpha-1,6-linked mannose residues), concanavalin A (mannose and glucose specific), or NPA lectin (specific for alpha-1,6-linked mannosyl units). Protease treatment of the bacterial cells completely abolished coflocculation. From these results we conclude that mannose residues on the cell surface of S. pombe serve as receptors for a P. damnosus lectin but that these receptors are shielded by galactose residues in wild-type strains. Such interactions are important in the production of Belgian acid types of beers in which mixed cultures are used to improve flavor.

Cell Wall↗

Sensitivity of Saccharomyces cerevisiae to tannic acid is due to iron deprivation.

Tannic acid inhibited the growth of the yeast Saccharomyces cerevisiae. Growth medium supplementation with more nitrogen or metal ions showed that only iron ions could restore the maximal growth rate of S. cerevisiae. Tannic acid resistant mutants were previously isolated by screening for tannic acid resistance and were all cytoplasmic petite mutants. While the wild type was very sensitive to iron deprivation conditions when grown in aerobic conditions, the mutants, whether grown aerobically or anaerobically, showed the same growth rate under iron-limited conditions as under iron-repleted conditions. Also, the wild type grown anaerobically was not affected by iron-limited conditions. Cytoplasmic petite mutants obtained by ethidium bromide mutagenesis behaved like the other mutants. During iron limitation, the wild type showed a reduced oxygen uptake rate. Maximal growth rate of the wild type in iron-limited conditions could be restored by the addition to the media of unsaturated fatty acids and sterol. Iron deprivation caused by tannic acid may thus affect the synthesis of a functional respiratory chain as well as the synthesis of unsaturated fatty acids and (or) sterol.

Ammonium Sulfate↗

Isolation of adherent polycyclic aromatic hydrocarbon (PAH)-degrading bacteria using PAH-sorbing carriers.

Two different procedures were compared to isolate polycyclic aromatic hydrocarbon (PAH)-utilizing bacteria from PAH-contaminated soil and sludge samples, i.e., (i) shaken enrichment cultures in liquid mineral medium in which PAHs were supplied as crystals and (ii) a new method in which PAH degraders were enriched on and recovered from hydrophobic membranes containing sorbed PAHs. Both techniques were successful, but selected from the same source different bacterial strains able to grow on PAHs as the sole source of carbon and energy. The liquid enrichment mainly selected for Sphingomonas spp., whereas the membrane method exclusively led to the selection of Mycobacterium spp. Furthermore, in separate membrane enrichment set-ups with different membrane types, three repetitive extragenic palindromic PCR-related Mycobacterium strains were recovered. The new Mycobacterium isolates were strongly hydrophobic and displayed the capacity to adhere strongly to different surfaces. One strain, Mycobacterium sp. LB501T, displayed an unusual combination of high adhesion efficiency and an extremely high negative charge. This strain may represent a new bacterial species as suggested by 16S rRNA gene sequence analysis. These results indicate that the provision of hydrophobic sorbents containing sorbed PAHs in the enrichment procedure discriminated in favor of certain bacterial characteristics. The new isolation method is appropriate to select for adherent PAH-degrading bacteria, which might be useful to biodegrade sorbed PAHs in soils and sludge.

Bacterial Adhesion↗

Initial transformations in the biodegradation of benzothiazoles by Rhodococcus isolates.

Benzothiazole-2-sulfonate (BTSO3) is one of the side products occurring in 2-mercaptobenzothiazole (MBT) production wastewater. We are the first to isolate an axenic culture capable of BTSO3 degradation. The isolate was identified as a Rhodococcus erythropolis strain and also degraded 2-hydroxybenzothiazole (OBT) and benzothiazole (BT), but not MBT, which was found to inhibit the biodegradation of OBT, BT, and BTSO3. In anaerobic resting cell assays, BTSO3 was transformed into OBT in stoichiometric amounts. Under aerobic conditions, OBT was observed as an intermediate in BT breakdown and an unknown compound transiently accumulated in several assays. This product was identified as a dihydroxybenzothiazole. Benzothiazole degradation pathways seem to converge into OBT, which is then transformed further into the dihydroxy derivative.

Aerobiosis↗

Cloning and sequencing of the LEU2 homologue gene of Schwanniomyces occidentalis.

A gene that complements the leu2 mutation of Saccharomyces cerevisiae has been cloned from Schwanniomyces occidentalis. The gene codes for a protein of 379 amino acids. As expected for a Schwanniomyces gene, it has a high AT content, which is also reflected in the codon usage. The sequence homology with other known leu2 complementing genes is low.

3-Isopropylmalate Dehydrogenase↗

Biotreatment of ammonia- and butanal-containing waste gases.

The biological removal of ammonia and butanal in contaminated air was investigated by using, respectively, a laboratory-scale filter and a scrubber-filter combination. It was shown that ammonia can be removed with an elimination efficiency of 83% at a volumetric load of 100 m3.m-2.h-1 with 4-16 ppm of ammonia. During the experiment percolates were analysed for nitrate, nitrite, ammonium and pH. It was found that the nitrification in the biofilter could deteriorate due to an inhibition of Nitrobacter species, when the free ammonia concentration was rising in the percolate. It should be easy to control such inhibition through periodic analysis of the liquid phase by using a filter-scrubber combination. Such a combination was studied for butanal removal. Butanal was removed with an elimination efficiency of 80% by a scrubber-filter combination at a volumetric load of 100 m3.m-2.h-1 and a high butanal input concentration. Mixing the filter material with CaCO3 and pH control of the liquid in the scrubber resulted in an increase of the elimination efficiency. These results, combined with previous results on the biofiltration of butanal and butyric acid, allow us to discuss the influence of odour compounds on the removal efficiency of such systems and methods for control. The results were used to construct a full-size system, which is described.

Air Pollutants↗

2-Mercaptobenzothiazole degradation in laboratory fed-batch systems.

Rubber additives manufacture yields waste-waters with recalcitrant and/or toxic benzothiazole compounds. Biodegradation of such compounds was investigated in fed-batch systems. 2-Mercaptobenzothiazole (MBT) was best degraded by a mixture of MBT-history and non-MBT-history sludge. Concentrations up to 200 mg.l-1 were removed. From 100 mg.l-1 onwards, high percentages of the recalcitrant disulphide were accumulated in the sludge. MBT slowed down the biodegradation of benzothiazole-2-sulphonate. MBT and benzothiazole did not mutually influence their degradation. Under some experimental conditions high levels of unidentified so-called polar compounds were formed.

Bacteria↗

Toxicity of 2-mercaptobenzothiazole towards bacterial growth and respiration.

Active sludge systems containing benzothiazoles may be intoxicated by 2-mercaptobenzothiazole (MBT). This toxicity towards several bacteria is now confirmed and is situated at around 100 mg MBT l-1. Octanol-water partition coefficients indicated that MBT might interact with membrane-bound systems. This was confirmed through experiments showing that bacterial cell respiration was inhibited using lactate or succinate as substrates. Using these substrates and also NADH, it was found that their oxidation was also inhibited using isolated membrane fragments of Escherichia coli and Paracoccus denitrificans. Methylene blue reduction was also found to be inhibited. The oxidation of ascorbate was not inhibited in P. denitrificans. From these results it is suggested that MBT might interact with the respiratory chain at the level of flavoproteins or quinones and Fe-S clusters.

Bacteria↗

Parameters affecting the degradation of benzothiazoles and benzimidazoles in activated sludge systems.

It was found that benzothiazole, 2-oxybenzothiazole and 2-benzothiazolesulphonate were degraded in activated sludge systems. 2-Mercaptobenzothiazole (MBT) was more resistant, although the first step in MBT degradation seemed to be transformation to the sulphonate form. At higher MBT concentrations, it was transformed into a disulphide, which accumulated in the sludge. MBT was also found to be mainly responsible for the toxicity of rubber chemical waste-water towards activated sludges. It inhibited the degradation of the other heterocycles. Only at concentrations of around 20 ppm was MBT degraded. Mercaptobenzimidazole ranked second in resistance to degradation.

Benzimidazoles↗

Purification and characterization of extracellular alpha-amylase and glucoamylase from the yeast Candida antarctica CBS 6678.

An alpha-amylase and a glucoamylase were purified to homogeneity from the culture fluid of beta-cyclodextrin-grown Candida antarctica CBS 6678 by protamine sulfate treatment, ammonium sulfate precipitation, gel filtration (Sephadex G-75 sf, Ultrogel AcA 54), DEAE-Sephacel chromatography, hydroxyapatite chromatography and affinity chromatography on acarbose--AH-Sepharose 4B. Both enzymes were monomeric glycoproteins with fairly different amino acid compositions. Their apparent relative molecular mass, sedimentation coefficient (Szero20,w), isoelectric point, absorption coefficient (280 nm), pH and temperature optima were estimated as 48,500, 4.7 S, 10.1, 1.74 cm2 mg-1, 4.2 and 57 degrees C, respectively, for glucoamylase and as 50,000, 4.9 S, 10.3, 1.53 cm2 mg-1, 4.2 and 62 degrees C, respectively, for alpha-amylase. Kinetic analyses indicated that both enzymes preferentially hydrolyzed high-molecular-mass substrates, including some raw starches. alpha-Amylase was active on cyclodextrins, whereas debranching activity was demonstrated for glucoamylase. Trestatins were potent inhibitors of both alpha-amylase (Ki less than 1 microM) and glucoamylase (Ki less than 0.1 microM), being more effective than Bay e 4609 (Ki less than 10 microM). Glucoamylase was selectivity and strongly inhibited by acarbose (Ki less than 0.1 microM). Activity of the latter enzyme was also affected by 1-deoxynojirimycin (Ki less than 1 mM), maltitol and amino alcohols (Ki less than 10 mM). Unlike alpha-amylase, glucoamylase adsorbed strongly onto raw starch, the adsorption site being non-identical with the active site.

Adsorption↗

Secretion of alpha-amylase and multiple forms of glucoamylase by the yeast Trichosporon pullulans.

Trichosporon pullulans IGC 3488 produced extracellular alpha-amylase and glucoamylase activities when grown in batches in a medium containing corn steep liquor and soluble starch or corn starch. alpha-Amylase, unlike glucoamylase activity, was secreted biphasically. For both amylases the maximum concentration was found in stationary phase cultures. The amylolytic enzymes, previously concentrated by ammonium sulfate precipitation, were separated into a glucoamylase fraction and an alpha-amylase fraction by Ultrogel AcA 54 gel filtration. Pullulanase activity was located in the glucoamylase fraction, whereas cyclodextrinase activity was restricted to the alpha-amylase fraction. Isoamylase and alpha-glucosidase were not detected. Electrophoretic analysis showed that alpha-amylase activity was due to a single protein. Glucoamylase, however, occurred in multiple forms. The four glucoamylases and the alpha-amylase were glycoproteins.

Chromatography, Gel↗