Biomedical subjects

H W Stokes

Publications and source records attributed to H W Stokes.

At least 37 records · Page 2Linked to original sources

PubMed2001

Transposons Tn1696 and Tn21 and their integrons In4 and In2 have independent origins.

The first 13.6 kb of the mercury and multidrug resistance transposon Tn1696, which includes the class 1 integron In4, has been sequenced. In4 is 8.33 kb long and contains the 5'-conserved segment (5'-CS) and 2.24 kb of the 3'-conserved segment (3'-CS) flanking four integrated cassettes. The 3'-CS region is followed by one full copy and an adjacent partial copy of the insertion sequence IS6100 flanked, in inverse orientation, by two short segments (123 and 152 bp) from the outer right-hand end of class 1 integrons. This structure is representative of a distinct group of class 1 integrons that differs from In2, found in Tn21, and other related class 1 integrons. In4 does not include transposition genes but is bounded by characteristic 25-bp inverted repeats and flanked by a direct duplication of 5 bp of the target sequence, indicating that it was inserted by a transpositional mechanism. In4 lies between the resII and resI sites of a backbone mercury resistance transposon which is >99.5% identical to Tn5036. Although Tn21 and Tn1696 are both classified as members of the Tn21 subfamily of the Tn3 transposon family, the backbone mercury resistance transposons are only 79 to 96% identical. Tn21 also contains a region of about 0.7 kb not found in Tn1696. The integrons In2 and In4 carrying the antibiotic resistance genes have been inserted at different locations into distinct ancestral mercury resistance transposons. Thus, Tn21 and Tn1696 have independent histories and origins. Other transposons (Tn1403 and Tn1412) that include a class 1 integron also have independent origins. In all except Tn21, the integron is located within the res region of the backbone transposon.

Anti-Infective Agents, Local↗

PubMed2001

Gene cassette PCR: sequence-independent recovery of entire genes from environmental DNA.

The vast majority of bacteria in the environment have yet to be cultured. Consequently, a major proportion of both genetic diversity within known gene families and an unknown number of novel gene families reside in these uncultured organisms. Isolation of these genes is limited by lack of sequence information. Where such sequence data exist, PCR directed at conserved sequence motifs recovers only partial genes. Here we outline a strategy for recovering complete open reading frames from environmental DNA samples. PCR assays were designed to target the 59-base element family of recombination sites that flank gene cassettes associated with integrons. Using such assays, diverse gene cassettes could be amplified from the vast majority of environmental DNA samples tested. These gene cassettes contained complete open reading frames, the majority of which were associated with ribosome binding sites. Novel genes with clear homologies to phosphotransferase, DNA glycosylase, methyl transferase, and thiotransferase genes were identified. However, the majority of amplified gene cassettes contained open reading frames with no identifiable homologues in databases. Accumulation analysis of the gene cassettes amplified from soil samples showed no signs of saturation, and soil samples taken at 1-m intervals along transects demonstrated different amplification profiles. Taken together, the genetic novelty, steep accumulation curves, and spatial heterogeneity of genes recovered show that this method taps into a vast pool of unexploited genetic diversity. The success of this approach indicates that mobile gene cassettes and, by inference, integrons are widespread in natural environments and are likely to contribute significantly to bacterial diversity.

Bacteria↗

PubMed2001

Efficiency of recombination reactions catalyzed by class 1 integron integrase IntI1.

The class 1 integron integrase, IntI1, recognizes two distinct types of recombination sites, attI sites, found in integrons, and members of the 59-be family, found in gene cassettes. The efficiencies of the integrative version of the three possible reactions, i.e., between two 59-be, between attI1 and a 59-be, or between two attI1 sites, were compared. Recombination events involving two attI1 sites were significantly less efficient than the reactions in which a 59-be participated, and the attI1 x 59-be reaction was generally preferred over the 59-be x 59-be reaction. Recombination of attI1 with secondary sites was less efficient than the 59-be x secondary site reaction.

Attachment Sites, Microbiological↗

PubMed2000

Definition of the attI1 site of class 1 integrons.

Integron-encoded integrases recognize two distinct types of recombination site: attI sites, found in integrons, and members of the 59-base element (59-be) family, found in the integron-associated gene cassettes. The class 1 integron integrase, IntI1, catalyses recombination between attI1 and a 59-be, two 59-be, or two attI1 sites, but events involving two attI1 sites are less efficient than the reactions in which a 59-be participates. The full attI1 site is required for high-efficiency recombination with a 59-be site. It is 65 bp in length and includes a simple site, consisting of a pair of inversely oriented IntI1-binding domains, together with two further directly oriented IntI1-binding sites designated strong and weak. However, a smaller region that contains only the simple site is sufficient to support a lower level of recombination with a complete attI1 partner and the features that determine the orientation of attI1 reside within this region. An unusual reaction between the attI1 site and a 59-be appears to be responsible for the loss of the central region of a 59-be to create a potential fusion of two adjacent gene cassettes.

Attachment Sites, Microbiological↗

PubMed1999

Characterisation of a chloramphenicol acetyltransferase determinant found in the chromosome of Pseudomonas aeruginosa.

The open reading frame (ORF) in the Pseudomonas aeruginosa chromosome, whose product resembles the chloramphenicol acetyltransferases (CAT) belonging to the CATB family, was cloned and shown to confer resistance to chloramphenicol (Cm) in Escherichia coli. The determinant was therefore named catB7 and the corresponding protein CATB7. When the copy number and expression signals were identical, the catB7 gene conferred resistance to Cm at a level slightly lower than those of three other catB genes. CATB7 resembles other CATBs in that it acetylates Cm but not 1-acetoxy-Cm. For CATB7, the K(m) values for acetyl-CoA and Cm were 5.0-5.4-fold higher than the corresponding values for each of the three other CATB proteins (CATB1, CATB3 and CATB5) examined and the Vmax was 5-6 fold lower. Using PCR, the catB7 gene was found in all six P. aeruginosa strains examined but not in any other species of pseudomonad tested. Weak CAT activity was detected in crude cell extracts from five of the six P. aeruginosa strains. However, this activity did not correlate with the Cm susceptibility of the strains, indicating that catB7 is not likely to be the major determinant of intrinsic Cm resistance in P. aeruginosa.

Amino Acid Sequence↗

PubMed1999

Mobile gene cassettes and integrons in evolution.

Integrons and the site-specific recombination systems encoded by them provide a simple mechanism for the addition of new genes to bacterial chromosomes. Although there is substantial divergence among the four known integron-encoded integrases, they all recognize the recombination sites, known as 59-base elements, that are associated with genes that are packaged in gene cassettes. In contrast, the integron-associated recombination sites, attl sites, are preferentially recognized by the cognate integrase.

Base Sequence↗

PubMed1998

Binding of the purified integron DNA integrase Intl1 to integron- and cassette-associated recombination sites.

The site-specific recombinase Intl1, encoded by class 1 integrons, catalyses the integration and excision of gene cassettes by recognizing two classes of sites, the integron-associated attl1 site and the 59-base element (59-be) family of sites that are associated with gene cassettes. Intl1 includes the four conserved amino acids that are characteristic of members of the integrase family, and Intl1 proteins with single amino acid substitutions at each of these positions had substantially reduced catalytic activity, consistent with this classification. Intl1 was purified as a fusion protein and shown to bind to isolated attl1 or 59-be recombination sites. Binding to attl1 was considerably stronger than to a 59-be. Binding adjacent to the recombination cross-over point was not detected. A strong Intl1 binding site within attl1 was localized by both deletion and footprinting analysis to a 14 bp region 24-37 bp to the left of the recombination cross-over point, and this region is known to be critical for recombination in vivo (Recchia et al., 1994). An imperfect (13/15) direct repeat of this region, located 41-55 bp to the left of the recombination cross-over point, contains a weaker Intl1 binding site. Mutation of the stronger binding site showed that a single base pair change accounted for the difference in the strength of binding.

Amino Acid Sequence↗

PubMed1997

Structure and function of 59-base element recombination sites associated with mobile gene cassettes.

The integration of gene cassettes into integrons is effected by site-specific recombination catalysed by an integrase, IntI, encoded by the integron. The cassette-associated recombination sites, 59-base elements, are not highly conserved and vary in length from 57 to 141 bp. They can be identified by their location and the relationship of over 20 bp at their outer ends to consensus sequences that are imperfect inverted repeats of one another. The recombination cross-over occurs close to one end of the 59-base element, within a conserved core site with the consensus sequence GTTAGGC or GTTRRRY. By introducing single-base changes at each of these positions in the aadB 59-base element, bases that are critical for site activity were identified. The recombination cross-over was also localized to a unique position between the adjacent G and T residues. Changes introduced in the conserved AAC of the inverse core site (GCCTAAC or RYYYAAC) located at the opposite end of the 59-base element also reduced site activity but to a lesser extent. Sequences of rare recombinants revealed an alternative position for strand exchange and led to the conclusion that 59-base elements comprise two simple sites, analogous to those recognized by other integrases, with each simple site made up of a pair of inversely oriented IntI binding domains separated by a spacer of 7 or 8 bp. Re-examination of the sequences of all known 59-base elements revealed that this simple site configuration was present at both the left and right ends in all 59-base elements. The identity of bases in the spacer is not required for efficient recombination and the cross-over is located at one end of the spacer, suggesting that during IntI1-mediated recombination only one strand exchange occurs.

Base Composition↗

PubMed1996

The integrons In0, In2, and In5 are defective transposon derivatives.

The class 1 integrons In0, In2, and In5, found in different locations in pVS1, Tn21, and pSCH884, have closely related structures. All three integrons contain an insertion sequence, IS1326, that is a new member of the IS21 family. IS1326 has caused deletions of adjacent 3'-conserved segment and transposition module sequences, and all three integrons retain a complete copy of only one of four genes required for transposition of related transposons and are thus defective transposon derivatives. In2 contains an additional insertion sequence, IS1353, located within IS1326. IS1353 is a member of the IS3 family and appears to have been acquired after the integron was inserted into an ancestral mercury resistance transposon to create the ancestor of Tn21 and several other transposons that are close relatives of Tn21.

Amino Acid Sequence↗

PubMed1995

Multidrug resistance in Klebsiella pneumoniae: a novel gene, ramA, confers a multidrug resistance phenotype in Escherichia coli.

Spontaneous multidrug-resistant (Mdr) mutants of Klebsiella pneumoniae strain ECL8 arose at a frequency of 2.2 x 10(-8) and showed increased resistance to a range of unrelated antibiotics, including chloramphenicol, tetracycline, nalidixic acid, ampicillin, norfloxacin, trimethoprim and puromycin. A chromosomal fragment from one such mutant was cloned, and found to confer an Mdr phenotype on Escherichia coli K12 cells that was essentially identical to that of the K. pneumoniae mutant. Almost complete loss of the OmpF porin in the E. coli transformant, and of the corresponding porin in the K. pneumoniae mutant, was observed. The presence of the Mdr mutation in K. pneumoniae or the cloned K. pneumoniae ramA (resistance antibiotic multiple) locus in E. coli also resulted in active efflux of tetracycline, and increased active efflux of chloramphenicol. After transformation of a ramA plasmid into E. coli, expression of chloramphenicol resistance occurred later than expression of resistance to tetracycline, puromycin, trimethoprim and nalidixic acid. The ramA gene was localized and sequenced. It encodes a putative positive transcriptional activator that is weakly related to the E. coli MarA and SoxS proteins. A ramA gene was also found to be present in an Enterobacter cloacae fragment that has previously been shown to confer an Mdr phenotype, and it appears that ramA, rather than the romA gene identified in that study, is responsible for multidrug resistance. The ramA gene from the wild-type K. pneumoniae was identical to that of the mutant strain and also conferred an Mdr phenotype on E. coli, indicating that the mutation responsible for Mdr in K. pneumoniae had not been cloned.

Amino Acid Sequence↗

PubMed1995

New mobile gene cassettes containing an aminoglycoside resistance gene, aacA7, and a chloramphenicol resistance gene, catB3, in an integron in pBWH301.

The multidrug resistance plasmid pBWH301 was shown to contain a sull-associated integron with five inserted gene cassettes, aacA7-catB3-aadB-oxa2-orfD, all of which can be mobilized by the integron-encoded DNA integrase. The aadB, oxa2, and orfD cassettes are identical to known cassettes. The aacA7 gene encodes a protein that is a member of one of the three known families of aminoglycoside acetyltransferases classified as AAC(6')-I. The chloramphenicol acetyltransferase encoded by the catB3 gene is closely related to members of a recently identified family of chloramphenicol acetyltransferases. The catB3 gene displays a relatively high degree of sequence identity to a chromosomally located open reading frame in Pseudomonas aeruginosa, and this may represent evidence for the acquisition by a cassette of a chromosomal gene.

Acetyltransferases↗

PubMed1994

Characterisation of specific and secondary recombination sites recognised by the integron DNA integrase.

Integrons determine a site-specific recombination system which is responsible for the acquisition of genes, particularly antibiotic resistance genes. The integrase encoded by integrons recognises two distinct classes of recombination sites. The first is the family of imperfect inverted repeats, known as 59-base elements, which are associated with the mobile gene cassettes. The second consists of a single site into which the cassettes are inserted. This site, here designated attI, is located adjacent to the int gene in the recipient integron structure. The attI site has none of the recognisable features of members of the 59-base element family except for a seven-base core site, GTTRRRY, at the recombination crossover point. Using a conduction assay to quantitate site activity, the sequence required for maximal attI site activity was confined to a region of > 39 and < or = 70 bases. Both integrative and excisive site-specific recombination events involving attI and a 59-base element site were demonstrated, but no evidence for events involving two attI sites was obtained. Integrase-mediated recombination between a 59-base element and several secondary sites in pACYC184 with the consensus GNT occurred at low frequency, and such events could potentially lead to insertion of gene cassettes at many non-specific sites.

Base Sequence↗

PubMed1994

Integrons found in different locations have identical 5' ends but variable 3' ends.

The positions of the outer boundaries of the 5'- and 3'-conserved segment sequences of integrons found at several different locations have been determined. The position of the 5' end of the 5'-conserved segment is the same for six independently located integrons, In1 (R46), In2 (Tn21), In3 (R388), In4 (Tn1696), In5 (pSCH884), and In0 (pVS1). However, the extent of the 3'-conserved segment differs in each integron. The sequences of In2 and In0 diverge first from the conserved sequence, and their divergence point corresponds to the 3'-conserved segment endpoint defined previously (H.W. Stokes and R.M. Hall, Mol. Microbiol. 3:1669-1683, 1989), which now represents the endpoint of a 359-base deletion in In0 and In2. The sequence identity in In3, In1, In4, and In5 extends beyond this point, but each sequence diverges from the conserved sequence at a different point within a short region. Insertions of IS6100 were identified adjacent to the end of the conserved region in In1 and 123 bases beyond the divergence point of In4. These 123 bases are identical to the sequence found at the mer end of the 11.2-kb insertion in Tn21 but are inverted. In5 and In0 are bounded by the same 25-base inverted repeat that bounds the 11.2-kb insert in Tn21, and this insert now corresponds to In2. However, while In0, In2, and In5 have features characteristic of transposable elements, differences in the structures of these three integrons and the absence of evidence of mobility currently preclude the identification of all of the sequences associated with a functional transposon of this type.

Base Sequence↗

PubMed1993

The partial 3'-conserved segment duplications in the integrons In6 from pSa and In7 from pDGO100 have a common origin.

Integrons are genetic elements which are capable of acquiring genes by site-specific recombination. The most common integron structure consists of two conserved segments flanking a variable region where many different antibiotic resistance genes have been found. The integrons In6 and In7, present in the plasmids pSa and pDGO100, respectively, are unusual in that they include a duplication of the sulI gene which is located within the integron 3'-conserved segment. To further investigate the structure of these integrons, the DNA sequence of the segment located between the two sulI genes was determined. In In7 this segment is 2822 bases long and includes a trimethoprim resistance gene, dhfrX, at one end. The corresponding region in In6 is 4.5 kb and is nearly identical to the In7 segment over the first 2105 bases. In the region unique to In6, a cat gene, conferring chloramphenicol resistance, has replaced the dhfrX gene of In7. This location thus represents a second variable region where different antibiotic resistance genes are found, but the way in which genes become associated with this second variable region is not known. The overall similarity of the structures of In6 and In7 suggests that the additional DNA segments found in these integrons have a common origin, and a possible mechanism for the origin of integrons with partial 3'-conserved segment duplications is presented.

Amino Acid Sequence↗

PubMed1993

Integrons: novel DNA elements which capture genes by site-specific recombination.

Integrons are unusual DNA elements which include a gene encoding a site-specific DNA recombinase, a DNA integrase, and an adjacent site at which a wide variety of antibiotic resistance and other genes are found as inserts. One or more genes can be found in the insert region, but each gene is part of an independent gene cassette. The inserted genes are expressed from a promoter in the conserved sequences located 5' to the genes, and integrons are thus natural expression vectors. A model for gene insertion in which circular gene cassettes are inserted individually via a single site-specific recombination event has been proposed and verified experimentally. The gene cassettes include a gene coding region and, at the 3' end of the gene an imperfect inverted repeat, a 59-base element. The 59-base elements are a diverse family of elements which function as sites recognized by the DNA integrase. Site-specific insertion of individual genes thus represents a further mechanism which contributes to the evolution of the genomes of Gram-negative bacteria and their plasmids and transposons. Members of the most studied class of integrons, which include the sulI gene in the conserved sequences, are believed to be mobile DNA elements on the basis that they are found in many independent locations, and a discrete boundary is found at the outer end of the 5'-conserved segment. However, the length of the 3'-conserved segment is variable in the integrons examined to date, and it is likely that this variability has arisen as the result of insertion and deletion events. Though the true extent of the 3'-conserved segment remains to be determined, it seems likely that these integrons are mobile DNA elements. The second known class of integrons comprises members of the Tn7 transposon family.

Base Sequence↗

PubMed1993

Site-specific insertion of gene cassettes into integrons.

Site-specific insertion of gene cassettes into the insert region of integrons has been demonstrated. Insertion was only observed if the integron DNA integrase was expressed in the recipient cell and if the cassette DNA was ligated prior to transformation. The essential ligation products were resistant to treatment with exonuclease III, indicating that they were closed circular molecules. Insertion of cassettes into integron fragments containing either no insert (one recombination site), or one gene cassette (two recombination sites), was demonstrated. In the latter case, insertion occurred predominantly at the core site located 5' to the resident cassette, which corresponds to the only site available when no insert is present in the recipient. When DNA molecules including two gene cassettes were used, insertion of only one of the gene cassettes was generally observed, suggesting that resolution of the circular molecule to generate two independent circular cassettes occurred more rapidly than insertion into the recipient integron.

Base Sequence↗

PubMed1992

Characterisation of a chloroplast-encoded secY homologue and atpH from a chromophytic alga. Evidence for a novel chloroplast genome organisation.

secY is a prokaryotic gene that encodes the SecY protein, an integral membrane component of the prokaryotic protein translocation apparatus. A chloroplast-encoded secY homologue has been identified in the unicellular, chromophytic alga, Pavlova lutherii. The gene predicts a protein composed of ten membrane-spanning regions, that is approximately 25% homologous and 50% similar to bacterial and plastid SecY proteins. The secY gene from P. lutherii is independent of the ribosomal protein (rp) gene cluster to which it is closely linked in other organisms. In P. lutherii secY is located 5' to atpI and atpH. Since, in higher plants the atpIHFA gene cluster and the rp gene cluster are separated by approximately 50 kb, we conclude, this indicates a novel chloroplast gene arrangement in P. lutherii.

Amino Acid Sequence↗

PubMed1992

Heat shock Hsp70 protein is chloroplast-encoded in the chromophytic alga Pavlova lutherii.

Heat shock proteins are ubiquitous and highly conserved. Recently they have become implicated in the import of proteins into organelles. All the heat shock genes characterized to date, however, are known or assumed to be encoded in the nuclear genome even if the corresponding protein can be localised in the mitochondrion or chloroplast. In contrast, we identify here an hsp70 gene in the unicellular chromophytic alga Pavlova lutherii which is located on the chloroplast genome. Localisation of this gene to the chloroplast chromosome is confirmed by Southern blot analysis and pulse-field gel electrophoresis which also reveals that the length of the P. lutherii chloroplast chromosome is 115 kb. We compare the predicted protein of this hsp70 gene with that of maize and of the analogous proteins in the prokaryotic organisms Escherichia coli and Synechocystis PCC6803. The greatest identity is found with the cyanobacterium Synechocystis PCC6803.

Amino Acid Sequence↗