Biomedical subjects

Hélio Pereira Lopes

Publications and source records attributed to Hélio Pereira Lopes.

3 recordsLinked to original sources

PubMed2007

Cyclic fatigue of ProTaper instruments.

The present work evaluated the influence of the curved segment length of artificial root canals (the arc) and the number of cycles necessary to fracture engine-driven nickel-titanium endodontic instruments. ProTaper F3 25-mm files at 250 rpm were used in two artificial canals. The artificial canals were made of stainless steel with an inner diameter of 1.04 mm, a total length of 20 mm, and arc on the ends with a radius of curvature of 6 mm. The arc length of the first tube measured 9.4 mm, and the straight part measured 10.6 mm. The second tube was 14.1 mm long, and the straight part measured 5.9 mm. We determined the fracture surface distances and the number of cycles necessary to induce fatigue fracture in the ProTaper F3 instruments. The fracture surfaces and the helical shaft of the instruments were investigated using a scanning electron microscope. The results indicated that the required number of cycles to cause a fracture was influenced by the canal arc length, the morphology of the fractured surface presented ductile characteristics, and plastic deformation in the helical shaft of the fractured instruments did not occur.

Dental High-Speed Equipment↗

PubMed2006

The physical characterization of a thermoplastic polymer for endodontic obturation.

OBJECTIVE: To analyze a new endodontic sealer material commercially known as Resilon and to describe in detail the experimental techniques employed that lead to the identification of the composite material. METHODS: An extensive structural, thermal, and physical characterization was used to identify a new endodontic sealer material using the following techniques: Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) analysis, X-ray fluorescence spectrometry (XRF) technique, X-ray diffraction (XRD) measurement, thermo-gravimetric analysis (TGA) and a differential scanning calorimeter (DSC). The surface morphology was analyzed using a scanning electron microscope (SEM). RESULTS: The material was identified as a composite of polycaprolactone, which is a polymer of the polyester family and bioactive glass, which is radiopaque filler. CONCLUSIONS: The Resilon sealer material is a thermoplastic synthetic degradable polymer (polycaprolactone), it contains bioactive glass. Its properties, such as strength, modulus, shape-memory effect and biodegradability depend on the crystalline fraction, which is affected in turn by conditions of crystallization. Investigation of the crystallization kinetics of PCL is of practical significance. It is especially necessary to study its the dynamic and non-isothermal crystallization process.

Calorimetry, Differential Scanning↗

PubMed2002

Root canal filling with calcium hydroxide using different techniques.

Several different techniques for placing calcium hydroxide into root canals have been proposed, such as amalgam carriers, vertical pluggers, McSpadden compactors, Lentulo drills, files and special syringes. Because correct filling of the root canal is necessary for calcium hydroxide paste to act effectively, the aim of this research was to study different techniques of root canal filling with calcium hydroxide pastes in dog teeth. The placement of calcium hydroxide with a file, absorbent paper points and vertical pluggers presented the lowest number of empty spaces in the three thirds of the root canal, followed by the Lentulo drill and the McSpadden compactor.

Animals↗