PubMed Health⌕ Search

Biomedical subjects

Haijun Jiao

Publications and source records attributed to Haijun Jiao.

At least 19 recordsLinked to original sources

Structural and electronic properties of hetero-transition-metal Keggin anions: a DFT Study of alpha/beta-[XW12O40]n- (X = CrVI, VV, TiIV, FeIII, CoIII, NiIII, CoII, and ZnII) relative stability.

Density functional theory calculations have been carried out to investigate the electronic structures and the alpha/beta relative stability of Keggin-typed [XW(12)O(40)]n- anions with transition metal as heteroatom X (X = Cr(VI), V(V), Ti(IV), Fe(III), Co(III), Ni(III), Co(II) and Zn(II)). Nice agreement in geometries between computation and experiment has been obtained, and the higher stability of the alpha isomer over the beta one has been confirmed. Structural parameter analysis reveals that the {M(3)O(13)} triads in both alpha and beta isomers contract considerably with the increase of the negative anionic charge, while the overall size of both isomers shrinks only slightly. Fragment molecular orbital analysis shows that except alpha/beta-[TiW(12)O(40)]4-, the electronic structures of Keggin anions can be described by the insertion of the e and/or t2 orbital of XO4n- into the frontier orbitals of W(12)O(36) cage, and this leads to the specific redox property, which is different from that of the Keggin anions with main-group elements as heteroatoms. Energy decomposition analysis shows that the enhanced intrinsic stability of the alpha isomer in Td arrangement of W(12)O(36) shell and the larger deformation of the alpha over the beta isomer are two dominating factors and contribute oppositely to the alpha/beta relative stability.

Journal Article↗

Structure and energy of Mo27SxCy clusters: a density functional theory study.

For understanding the carburization processes of MoSx catalysts, the structures and energies of Mo27SxCy cluster models have been computed at the level of density functional theory. The surface sulfur atoms on the Mo edge and S edge as well as bulky sulfur atoms have been replaced by atomic carbon, and the corresponding structures have S/C ratios in the range of 0.8-55. The formation of all Mo27SxCy structures is favored thermodynamically. It is also found that the formation of CS and C2 bridging units is more favored than the individual or separated replacements and that the formation of C2 bridging units is more favored than that of CS units. In contrast, the replacement of sulfur on the Mo edge is least favored. Furthermore, the replacement of the bulky sulfur on the Mo edge is equally favored as those of sulfur on the S edge. For aiding further experimental studies, the C=S and C=C stretching frequencies have been computed.

Journal Article↗

Thiophene adsorption and activation on MoP(001), gamma-Mo2N(100), and Ni2P(001): density functional theory studies.

The adsorption and dissociation of thiophene on the MoP(001), gamma-Mo(2)N(100), and Ni(2)P(001) surfaces have been computed by using the density functional theory method. It is found that thiophene adsorbs dissociatively on MoP(001), while nondissociatively on gamma-Mo(2)N(100) and Ni(2)P(001). On MoP(001), the dissociation of the C-S bonds is favored both thermodynamically and kinetically, while the break of the first C-S bond on gamma-Mo(2)N(100) has an energy barrier of 1.58 eV and is endothermic by 0.73 eV. On Ni(2)P(001) there are Ni(3)P(2)- and Ni(3)P-terminated surfaces. On the Ni(3)P(2)-terminated surface, the dissociation of the C-S bonds of adsorbed thiophene is endothermic, while it is exothermic on the Ni(3)P-terminated surface.

Journal Article↗

NO adsorption on MoS(x) clusters: a density functional theory study.

The density functional theory (DFT) method has been used to investigate NO probe molecule adsorption on the stoichiometric (Mo(16)S(32)) and nonstoichiometric (Mo(16)S(34) and Mo(16)S(29)) clusters. The calculated adsorption energies indicate that the stoichiometric cluster has stronger NO affinity than the nonstoichiometric surfaces. It is also found that mononitrosyl adsorption is favored at low NO coverage, while dinitrosyl (germinal) and (NO)(2) dimer adsorption at high NO coverage are possible. Strong repulsive interaction has been found for the adsorbed dinitrosyl and (NO)(2) dimer species. In addition, the computed NO stretching frequencies for the mononitrosyl and dinitrosyl species agree well with the experimental data, while those of the dimer species are much lower than the suggested experimental data.

Journal Article↗

Localized and delocalized perfluorosemibullvalenes.

On the basis of the experimental Gibbs free-energy barrier of the degenerate Cope arrangement in semibullvalene, B3P86 shows the best agreement, while B3LYP and MP2 underestimate and CCSD(T) overestimates the barrier. The substituent effect proposal by Hoffmann has been verified. In contrast to semibullvalenes with either localized energy-minimum structures or delocalized transition-state structures, perfluorosemibullvalene has both localized and delocalized energy-minimum structures that are very close in energy.

Base Pairing↗

Density function theory study of CO adsorption on Fe3O4(111) surface.

Density functional theory calculations have been carried out for CO adsorption on the Fe(oct2)- and Fe(tet1)-terminated Fe(3)O(4)(111) surfaces, which are considered as active catalysts in water-gas shift reaction. It is found that the on-top configurations are most stable on these two surfaces. Some bridge configurations are also stable in which the new C-O bond formed between the surface O atom and the C atom of CO. The adsorption on the Fe(oct2)-terminated surface is more stable than on the Fe(tet1)-terminated surface. The density of state reveals the binding mechanism of CO adsorption on the two surfaces. Our calculations have also shown that the absorbed CO can migrate from the on-top site to the bridge site or 3-fold site. The oxidation of CO via surface oxygen atoms is feasible, which is in good agreement with experimental results.

Adsorption↗

A highly tunable family of chiral bisphospholanes for rh-catalyzed enantioselective hydrogenation reactions.

A set of 16 new and closely related bisphospholane ligands have been prepared by using a highly flexible and convergent approach. Each synthesis can be performed on an industrially relevant scale. The bisphosphines differ in the nature of the bridge connecting both phospholane units. Bridges are formed by three-, four-, five- and six-membered heterocyclic or alicyclic rings. Bisphospholanes and their Rh-precatalysts have been investigated by using results of theoretical calculations (DFT) and analytic measurements ((31)P and (103)Rh NMR spectroscopy, X-ray structure analysis). The studies showed that catalysts based on ligands with maleic anhydride or maleimide bridges give constantly superior enantioselectivities in methanol as the solvent. This may account for optimised steric and electronic effects. However, by changing the solvent catalysts with other backbones can give rise to excellent results. This gives proof that simple correlations between steric and electronic properties and results in the enantioselective hydrogenation frequently claimed in literature are not general.

Journal Article↗

CO2 reforming of CH4 on Ni(111): a density functional theory calculation.

CO(2) reforming of CH(4) on Ni(111) was investigated by using density functional theory. On the basis of thermodynamic analyses, the first step is CH(4) sequential dissociation into surface CH (CH(4) --> CH(3) --> CH(2) --> CH) and hydrogen, and CO(2) dissociation into surface CO and O (CO(2) --> CO + O). The second step is CH oxygenation into CHO (CH + O --> CHO), which is more favored than dissociation into C and hydrogen (CH --> C + H). The third step is the dissociation of CHO into surface CO and H (CHO --> CO + H). This can explain the enhanced selectivity toward the formation of CO and H(2) on Ni catalysts. It is found that surface carbon formation by the Bouduard back reaction (2CO = C((ads)) + CO(2)) is more favored than by CH(4) sequential dehydrogenation. The major problem of CO(2) reforming of CH(4) is the very strong CO adsorption on Ni(111), which results in the accumulation of CO on the surface and hinders the subsequent reactions and promotes carbon deposition. Therefore, promoting CO desorption should maintain the reactivity and stability of Ni catalysts. The computed energy barriers of the most favorable elementary reaction identify the CH(4) activation into CH(3) and H as the rate-determining step of CO(2) reforming of CH(4) on Ni(111), in agreement with the isotopic experimental results.

Journal Article↗

Structure and stability of neutral polyoxometalate cages: (Mo2O6)m (m=1-13).

The structure and stability of neutral polyoxometalate cages (Mo2O6)m (m=1-13) have been computed systematically. These neutral cages can be viewed topologically as polyhedra containing triangles (f3) and squares (f4). The relative stability of these polyhedra is associated with the location and separation of the f3. The initial stable isomers were preselected by the number of shared triangle edges (N33), and the predicted stability was validated further at the GGA-PW91/DND level of density function theory with the fine quality of mesh size. For large clusters, the square neighbor signature (P4444), which is similar to the hexagon neighbor rule for fullerene, becomes more applicable. The calculated disproportionation energies indicate that Mo6O18 (O(h), Lindqvist), Mo12O36 (O(h), alpha Keggin), Mo18O54 (D(3h), Wells-Dawson) and Mo24O72 (O(h)) cages have enhanced stability. [structure in text]. Mo6O18 (O(h)), Mo12O36 (O(h)), Mo18O54 (D(3h)) and Mo(24)O72 (O(h)) are the most stable neutral polyoxometalate cages on the basis of the structural and energetic criteria. They can therefore be considered as the inorganic fullerenes.

Electrons↗

Boron nitride cages from B12N12 to B36N36: square-hexagon alternants vs boron nitride tubes.

The structures and stabilities of square-hexagon alternant boron nitrides (Bx Nx , x=12-36) vs their tube isomers containing octagons, decagons and dodecagons have been computed at the B3LYP density functional level of theory with the correlation-consistent cc-pVDZ basis set of Dunning. It is found that octagonal B20N20 and B24N24 tube structures are more stable than their square-hexagon alternants by 18.6 and 2.4 kcal mol(-1), respectively, while the square-hexagon alternants of other cages are more stable. Trends in stability as a function of cluster size are discussed.

Boron Compounds↗

Ruthenium-catalyzed asymmetric epoxidation of olefins using H2O2, part I: synthesis of new chiral N,N,N-tridentate pybox and pyboxazine ligands and their ruthenium complexes.

The synthesis of chiral tridentate N,N,N-pyridine-2,6-bisoxazolines 3 (pybox ligands) and N,N,N-pyridine-2,6-bisoxazines 4 (pyboxazine ligands) is described in detail. These novel ligands constitute a useful toolbox for the application in asymmetric catalysis. Compounds 3 and 4 are conveniently prepared by cyclization of enantiomerically pure alpha- or beta-amino alcohols with dimethyl pyridine-2,6-dicarboximidate. The corresponding ruthenium complexes are efficient asymmetric epoxidation catalysts and have been prepared in good yield and fully characterized by spectroscopic means. Four of these ruthenium complexes have been characterized by X-ray crystallography. For the first time the molecular structure of a pyboxazine complex [2,6-bis-[(4S)-4-phenyl-5,6-dihydro-4H-[1,3]oxazinyl]pyridine](pyridine-2,6-dicarboxylate)ruthenium (S)-2 aa, is presented.

Journal Article↗

Ruthenium-catalyzed asymmetric epoxidation of olefins using H2O2, part II: catalytic activities and mechanism.

Asymmetric epoxidation of olefins with 30 % H2O2 in the presence of [Ru(pybox)(pydic)] 1 and [Ru(pyboxazine)(pydic)] 2 has been studied in detail (pybox = pyridine-2,6-bisoxazoline, pyboxazine = pyridine-2,6-bisoxazine, pydic = 2,6-pyridinedicarboxylate). 35 Ruthenium complexes with sterically and electronically different substituents have been tested in environmentally benign epoxidation reactions. Mono-, 1,1-di-, cis- and trans-1,2-di-, tri-, and tetra-substituted aromatic olefins with versatile functional groups can be epoxidized with this type of catalyst in good to excellent yields (up to 100 %) with moderate to good enantioselectivies (up to 84 % ee). Additive and solvent effects as well as the relative rate of reaction with different catalysts have been established. It is shown that the presence of weak organic acids or an electron-withdrawing group on the catalyst increases the reactivity. New insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed epoxidation are proposed on the basis of density functional theory calculation and experiments.

Journal Article↗

The structure and stability of B36N36 cages: a computational study.

The structure and stability of 22 B36N36 cage molecules containing four-membered (F4), five-membered (F5), six-membered (F6), eight-membered (F8) and 12-membered (F12) rings have been computed at the B3LYP/6-31G* level of density functional theory. The most stable structure (1) has T(d) symmetry with six F4 and 32 F6 rings, following the isolated square rule, while the fullerene-like structures (12 F5 and 26 F6) and also structures with F8 and F12 are much higher in energy. Figure The T(d) symmetrical structure (1) with six F4 and thirty-two F6 rings is the most stable B36N36 cage.

Carbon↗

Chemisorption of CO2 on nickel surfaces.

CO2 chemisorption on the Ni(111), Ni(100), and Ni(110) surfaces was investigated at the level of density functional theory. It was found that the ability of CO2 chemisorption is in the order of Ni(110) > Ni(100) > Ni(111). CO2 has exothermic chemisorption on Ni(110) and endothermic chemisorption on Ni(111), while it is thermally neutral on Ni(100). It is also found that there is no significant lateral interaction between the adsorbed CO2 at 1/4 monolayer (ML) coverage, while there is stronger repulsive interaction at 1/2 ML. On all surfaces, the chemisorbed CO2 is partially negatively charged, indicating the enhanced electron transfer, and the stronger the electron transfer, the stronger the C=O bond elongation. The bonding nature of the adsorbed CO2 on nickel surfaces has been analyzed. The thermodynamics of CO2 dissociative chemisorption, compared with CO and O adsorption, has been discussed, and the thermodynamic preference is in the sequence Ni(100) > Ni(111) > Ni(110).

Journal Article↗

Surface structure and stability of MoSx model clusters.

Density functional theory (DFT) computations have been carried out to study the structure and stability of MoSx clusters with the change of sulfur coverage at both Mo and S edges. DFT shows that adding sulfur to the Mo edge is always exothermic. However, deleting corner sulfur from the S edge is exothermic for 67 and 50% sulfur coverages, while deleting edge sulfur from the S edge is endothermic for 33 and 0% sulfur coverages. On the basis of the computed free energies along a wide range of H2S/H2 ratios, it is found that there are two stable structures with 33 and 50% sulfur coverages on the Mo edge by having 100% sulfur coverage on the S edge and one stable structure with 67% sulfur coverage on the S edge by having 0% sulfur coverage on the Mo edge. Under fully sulfiding atmosphere or at a very high H2S/H2 ratio, triangle MoSx structures with 100% sulfur coverage on the Mo edge are computed to be more stable than those with 100% sulfur coverage on the S edge, in agreement with the observation of scanning tunneling microscopy. In addition, the effects of cluster sizes on the surface structures are discussed.

Journal Article↗

Surface structure and energetics of hydrogen adsorption on the Fe(111) surface.

Spin-polarized density functional theory calculations have been performed to characterize the hydrogen adsorption and diffusion on the Fe(111) surface at 2/3-, 1-, and 2-monolayer (ML) coverages. It is found that the most favored adsorption site for atomic hydrogen (H) is the top-shallow bridge site (tsb), followed by the quasi 4-fold site (qff) with the energy difference of about 0.1 eV, while the top site (t) is not competitive. Furthermore, the adsorbed atomic hydrogen (H) has a high mobility, as indicated by the small diffusion barriers. The local density of state (LDOS) analysis reveals that the Fe-H (tsb or qff) bond involves mainly the Fe 4s and 4p and H 1s orbitals with less contribution of the Fe 3d orbital, while the Fe 4s, 4p, and 3d orbitals all participate in the Fe-H (top) bond. In addition, the coverage effects on the adsorption configurations and adsorption energies are addressed.

Journal Article↗

Density functional theory study of triangular molybdenum sulfide nanocluster and CO adsorption on it.

A systematic density functional theory study has been carried out on the structure and stability of triangular molybdenum sulfide (MoS(x)()) models. On the basis of the structural and energetic comparison, the triangle Mo(28)S(84) (VII) cluster has been identified as a reasonable structure for triangular MoS(x)() model. Under reductive atmosphere, the most stable structure has bridging sulfur on edge sites and two H(2)S at each corner site. It is found that CO adsorption at the corner site represents the most stable conformation. Along with other stretching modes, the computed frequency at 2102 cm(-1) for CO at the corner agrees perfectly with the experimental observation.

Journal Article↗

Structures and energies of coadsorbed CO and H2 on Fe5C2(001), Fe5C2(110), and Fe5C2(100).

Density functional theory calculations have been carried out on the CO/H2 coadsorption on the (001), (110), and (100) surfaces of Fe5C2 for the understanding of the Fischer-Tropsch synthesis (FTS) mechanism. The stable surface species changes with the variation of the H2 and CO coverage. Along with dissociated hydrogen and adsorbed CO in 2-, 3-, and 4-fold configurations, methylidyne (C(s)H) (C(s), surface carbon), ketenylidene (C(s)CO), ketenyl (C(s)HCO), ketene (C(s)H2CO), and carbon suboxide (C(s)C2O2) are computed as thermodynamically stable surface species on Fe5C2(001) and Fe5C2(110) containing both surface iron and carbon atoms. These surface carbon species can be considered as the preliminary stages for FTS. On Fe5C2(100) with only iron atoms on the surface layer, the stable surface species is dissociated hydrogen and CO with top and 2-fold configurations. The bonding nature of these adsorbed carbon species has been analyzed.

Journal Article↗