Biomedical subjects

Hak Yong Kim

Publications and source records attributed to Hak Yong Kim.

At least 19 recordsLinked to original sources

PubMed2006

Angiogenin-induced protein kinase B/Akt activation is necessary for angiogenesis but is independent of nuclear translocation of angiogenin in HUVE cells.

Angiogenin, a potent angiogenic factor, binds to endothelial cells and is endocytosed and rapidly translocated to and concentrated in the nucleolus where it binds to DNA. In this study, we report that angiogenin induces transient phosphorylation of protein kinase B/Akt in cultured human umbilical vein endothelial (HUVE) cells. LY294002 inhibits the angiogenin-induced protein kinase B/Akt activation and also angiogenin-induced cell migration in vitro as well as angiogenesis in chick embryo chorioallantoic membrane in vivo without affecting nuclear translocation of angiogenin in HUVE cells. These results suggest that cross-talk between angiogenin and protein kinase B/Akt signaling pathways is essential for angiogenin-induced angiogenesis in vitro and in vivo, and that angiogenin-induced PKB/Akt activation is independent of nuclear translocation of angiogenin in HUVE cells.

Active Transport, Cell Nucleus↗

PubMed2006

Direct binding of recombinant plasminogen kringle 1-3 to angiogenin inhibits angiogenin-induced angiogenesis in the chick embryo CAM.

Angiogenin is one of the most potent angiogenesis-inducing proteins. Angiostatin is one of the most potent angiogenesis inhibitors, and it contains the first four kringle domains of plasminogen (K1-4). Recombinant human plasminogen kringle 1-3 (rK1-3) was expressed in Escherichia coli and purified to homogeneity. The binding of t-4-aminomethylcyclohexanecarboxylic acid with the purified kringle 1-3 was determined by changes in intrinsic fluorescence. rK1-3 exhibits comparable ligand-binding properties as native human plasminogen kringle 1-3. The purified rK1-3 inhibits neovascularization in the chick embryo chorioallantoic membrane (CAM) assay. Interaction of angiogenin with rK1-3 was examined by immunological binding assay and surface plasmon resonance kinetic analysis, and the equilibrium dissociation constants for the complex, Kd, are 0.89 and 0.18 microM, respectively. rK1-3 inhibits angiogenin-induced angiogenesis in the chick embryo CAM in a concentration-dependent manner. These results indicate that rK1-3 directly binds to angiogenin and thus rK1-3 inhibits the angiogenic activity of angiogenin.

Angiogenesis Inhibitors↗

PubMed2006

Study of electrolyte induced aggregation of gold nanoparticles capped by amino acids.

This work reports the electrolyte induced aggregation of gold nanoparticles directly conjugated to amino acid by chemical reduction in aqueous solution. The study was focused on three different classes of amino acids depending on the nature of alpha substituent, viz. l-cysteine, l-leucine, and l-asparagine. The band broadening and the red shift of surface plasmon band with increase in flocculation parameter showed the aggregation of gold nanoparticles with increase in electrolyte concentration and decrease in pH as monitored by UV-visible spectrophotometer. The (1)H NMR spectrum demonstrates that the sulfide bond of cysteine and alpha amino group of leucine and asparagine interact with nanoparticles surface. Furthermore, transmission electron microscope (TEM) and thermogravimetric analysis (TGA) were performed to characterize and to support the fate of stabilization of the gold nanoparticles by amino acid.

Amino Acids↗

PubMed2006

Protein kinase B inhibits endostatin-induced apoptosis in HUVECs.

Endostatin is a tumor-derived angiogenesis inhibitor, and the endogenous 20 kDa carboxyl-terminal fragment of collagen XVIII. In addition to inhibiting angiogenesis,endostatin inhibits tumor growth and the induction of apoptosis in several endothelial cell types. However, the mechanisms that regulate endostatin-induced apoptotic cell death are unclear. Here, we investigated apoptotic cell death and the underlying regulatory mechanisms elicited of endostatin in human umbilical vein endothelial cells (HUVECs). Endostatin was found to induce typical apoptotic features, such as, chromatin condensation and DNA fragmentation in these cells. Thus, as the phosphoinositide 3-OH kinase (PI3K)/protein kinase B (PKB) signaling pathway has been shown to prevent apoptosis in various cell types, we investigated whether this pathway could protect cells against endostatin induced apoptosis. It was found that the inhibition of PI3K/PKB significantly increased endostatin-induced apoptosis, and that endostatininduced cell death is physiologically linked to PKB-mediated cell survival through caspase-8.

Androstadienes↗

PubMed2006

Novel block copolymer (PPDO/PLLA-b-PEG): enhancement of DNA uptake and cell transfection.

The cationic lipid mediated uptake of plasmid DNA by cells in monolayer culture was significantly enhanced with an aqueous solution of the block copolymer poly(p-dioxanone-co-L-lactide)-b-poly(ethylene glycol) (PPDO/PLLA-b-PEG). Plasmid uptake studies with DNA encoding the beta-galactosidase gene and cytotoxicity evaluations were performed on MCF-7, NIH 3T3 and CT-26 cell lines. Transfection yields and time courses for maximum release of FITC labeled DNA in MCF-7 cells were observed and quantified by beta-galactosidase assay and spectrofluorometry, respectively. The reported results suggest that the studied block copolymer might be useful for the enhancement of polycation mediated transfection and could find application in gene therapy.

3T3 Cells↗

PubMed2006

Hydrophilic nanofibrous structure of polylactide; fabrication and cell affinity.

Microstructure and architecture of the scaffolds along with the surface chemistry exert profound effect on biological activity (cell distribution, proliferation, and differentiation). For the biological activity, scaffolds in tissue engineering have been widely designed. The objective of this study was to develop hydrophilic nanofibrous structure of polylactides (PLLA) polymer in the form of nonwoven mat by electrospinning technique, and further evaluate the fibroblast NIH3T3 cell proliferation, morphology, and cell-matrix interaction. Hydrophilicity of the PLLA fibers was improved by adding small fraction of low molecular weight polyethylene glycol (PEG) into the electrospinning solution. Four different ratio types (100/0, 80/20, 70/30, and 50/50) of PLLA/PEG electrospun matrices were fabricated, and the pore characteristics, tensile properties, contact angle, and hydrolytic degradation were observed. Furthermore, scanning electron microscope (SEM) and fluorescence actin staining images were used for micro-observation of cell-matrix interaction and cell morphology. It was found that the electrospun mat of PLLA/PEG (80/20), composed of fibers with diameters in the range 540-850 nm, majority of pore diameter less than 100 microm, tensile strength 8 MPa, elongation 150%, porosity more than 90%, and improved hydrophilicity with slow hydrolytic degradation, is favorable for biological activity of NIH3T3 fibroblast cell. Based on these results, the correct composition of PLLA and PEG in the porous electrospun matrix (i.e., PLLA/PEG (80/20)) will be a better candidate rather than other compositions of PLLA/PEG as well as hydrophobic PLLA for application in tissue engineering.

3T3 Cells↗

PubMed2006

An improved hydrophilicity via electrospinning for enhanced cell attachment and proliferation.

The wettability of electrospun poly(epsilon-caprolactone) (PCL) mats was improved by co-electrospinning with poly(vinyl alcohol) (PVA), by double-spinneret electrospinning method. The improved hydrophilicity of the hybrid PCL/PVA mats was confirmed by water contact angle measurement. The in vitro cell attachment on the hydrophobic PCL and hydrophilically modified PCL/PVA mats was compared by culture studies using human prostate epithelial cells (HPECs). The stability of water-soluble PVA component in the electrospun PCL/PVA mats was checked by thermogravimetric analysis and intensity of fluorescence material after immersion in water for 7 days. The images from scanning electron microscopy, field emission scanning electron microscopy, and optical microscopy showed that the attachment and proliferation rate of HPECs were improved by introducing PVA into the electrospun PCL mats.

Cell Adhesion↗

PubMed2006

Stabilization of gold nanoparticles by hydrophobically-modified polycations.

Surface-modified gold nanoparticles have pronounced benefits in the biomedical field due to their significant interaction with delivery materials. In the present study we used hydrophobically-modified polycations (i.e., N-acylated chitosan) to stabilize gold nanoparticles. Aliphatic hydrophobic groups, having carbon chains of different lengths, were first grafted onto the backbone of chitosan by N-acylation with fatty-acid chlorides in order to increase its hydrophobicity. Gold nanoparticles stabilized with native chitosan and N-acylated chitosan were prepared by the graft-onto approach. Chemical modification and its quantification were studied by Fourier-transform infrared (FT-IR) spectroscopy. Further, the stabilized gold nanoparticles were characterized by different physico-chemical techniques such as UV-Vis, FT-IR, TEM, TGA and DLS. Spectral studies of gold nanoparticles show the backbone and the side chain functional groups of chitosan were not cleaved during the conjugation process. TEM observations revealed that the modified chitosan gold nanoparticles were well dispersed and spherical in shape with average size around 10-12 nm in triply-distilled water at pH 7.4, whereas the native chitosan gold nanoparticles appeared as clusters with 9.9 nm as average diameter and were dispersed only in dilute HCl. The size of modified chitosan gold nanoparticles varied depending on the length of grafting molecules.

Biocompatible Materials↗

PubMed2006

Deposition of gold nanoparticles on electrospun MgTiO3 ceramic nanofibers.

A simple method to deposit spherical gold nanoparticles on the surface of MgTiO3 ceramic nanofibers is presented. Electrospun MgTiO3/poly(vinyl acetate) (PVAc) hybrid nanofibers were calcined at 650 degrees C to obtain phase pure ceramic MgTiO3 nanofibers with 100-150 nm diameters. These ceramic nanofibers were immersed in an aqueous solution of HAuCl4 containing poly(vinyl alcohol) (PVA) as capping agent followed by photoreduction at 365 nm to get a novel Au-MgTiO3 nanocomposite. The formation of gold nanoparticles upon irradiation was confirmed by the appearance of a surface plasmon band (SPB) at 590 nm in the UV-visible absorption spectra. The surface morphology and elemental compositions were analyzed by the scanning electron microscope (SEM) equipped with energy dispersive X-ray (EDX), and transmission electron microscope (TEM). X-ray diffraction (XRD) and selected area diffraction (SAED) pattern in TEM revealed the crystallization of gold by exhibiting strong diffractions correspond to Au(111) and Au(200) crystalline planes in addition to the MgTiO3 diffraction.

Ceramics↗

PubMed2005

Activation of defense responses in Chinese cabbage by a nonhost pathogen, Pseudomonas syringae pv. tomato.

Pseudomonas syringae pv. tomato (Pst) causes a bacterial speck disease in tomato and Arabidopsis. In Chinese cabbage, in which host-pathogen interactions are not well understood, Pst does not cause disease but rather elicits a hypersensitive response. Pst induces localized cell death and H2O2 accumulation, a typical hypersensitive response, in infiltrated cabbage leaves. Pre-inoculation with Pst was found to induce resistance to Erwinia carotovora subsp. carotovora, a pathogen that causes soft rot disease in Chinese cabbage. An examination of the expression profiles of 12 previously identified Pst-inducible genes revealed that the majority of these genes were activated by salicylic acid or BTH; however, expressions of the genes encoding PR4 and a class IV chitinase were induced by ethephon, an ethylene-releasing compound, but not by salicylic acid, BTH, or methyl jasmonate. This implies that Pst activates both salicylate-dependent and salicylate-independent defense responses in Chinese cabbage.

Acetates↗

PubMed2005

Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy.

Crystalline structures of cellulose (named as Cell 1), NaOH-treated cellulose (Cell 2), and subsequent CO2-treated cellulose (Cell 2-C) were analyzed by wide-angle X-ray diffraction and FTIR spectroscopy. Transformation from cellulose I to cellulose II was observed by X-ray diffraction for Cell 2 treated with 15-20 wt% NaOH. Subsequent treatment with CO2 also transformed the Cell 2-C treated with 5-10 wt% NaOH. Many of the FTIR bands including 2901, 1431, 1282, 1236, 1202, 1165, 1032, and 897 cm(-1) were shifted to higher wave number (by 2-13 cm(-1)). However, the bands at 3352, 1373, and 983 cm(-1) were shifted to lower wave number (by 3-95 cm(-1)). In contrast to the bands at 1337, 1114, and 1058 cm(-1), the absorbances measured at 1263, 993, 897, and 668 cm(-1) were increased. The FTIR spectra of hydrogen-bonded OH stretching vibrations at around 3352 cm(-1) were resolved into three bands for cellulose I and four bands for cellulose II, assuming that all the vibration modes follow Gaussian distribution. The bands of 1 (3518 cm(-1)), 2 (3349 cm(-1)), and 3 (3195 cm(-1)) were related to the sum of valence vibration of an H-bonded OH group and an intramolecular hydrogen bond of 2-OH ...O-6, intramolecular hydrogen bond of 3-OH...O-5 and the intermolecular hydrogen bond of 6-O...HO-3', respectively. Compared with the bands of cellulose I, a new band of 4 (3115 cm(-1)) related to intermolecular hydrogen bond of 2-OH...O-2' and/or intermolecular hydrogen bond of 6-OH...O-2' in cellulose II appeared. The crystallinity index (CI) was obtained by X-ray diffraction [CI(XD)] and FTIR spectroscopy [CI(IR)]. Including absorbance ratios such as A1431,1419/A897,894 and A1263/A1202,1200, the CI(IR) was evaluated by the absorbance ratios using all the characteristic absorbances of cellulose. The CI(XD) was calculated by the method of Jayme and Knolle. In addition, X-ray diffraction curves, with and without amorphous halo correction, were resolved into portions of cellulose I and cellulose II lattice. From the ratio of the peak area, that is, peak area of cellulose I (or cellulose II)/total peak area, CI(XD) were divided into CI(XD-CI) for cellulose I and CI(XD-CII) for cellulose II. The correlation between CI(XD-CI) (or CI(XD-CII)) and CI(IR) was evaluated, and the bands at 2901 (2802), 1373 (1376), 897 (894), 1263, 668 cm(-1) were good for the internal standard (or denominator) of CI(IR), which increased the correlation coefficient. Both fraction of the absorbances showing peak shift were assigned as the alternate components of CI(IR). The crystallite size was decreased to constant value for Cell 2 treated at >or= 15 wt% NaOH. The crystallite size of Cell 2-C (cellulose II) was smaller than that of Cell 2 (cellulose I) treated at 5-10 wt% NaOH. But the crystallite size of Cell 2-C (cellulose II) was larger than that of Cell 2 (cellulose II) treated at 15-20 wt% NaOH.

Carbon Dioxide↗

PubMed2005

Spectroscopic identification of S-Au interaction in cysteine capped gold nanoparticles.

This study deals with the synthesis of cysteine capped gold nanoparticles with an average size of 12 nm by borohydride reduction and spectroscopic identification of SAu interaction. We have studied the interaction of thiol with gold nanoparticles in aqueous medium by employing UV-vis, Raman, NMR, and FT-IR spectroscopy. The shifting of gold plasmon resonance in the UV-vis spectra shows the stabilization of gold nanoparticles by cysteine. The disappearance of S-H stretching in both the IR and Raman spectra and the shifting of the NMR signals of the protons in close proximity to the metal center supported the existence of the S-Au interaction in cysteine capped gold nanoparticles. The TEM images shows cysteine capped gold nanoparticles as distinct and spherical entities as compared to free colloidal gold nanoparticles.

Cysteine↗

PubMed2004

EPO receptor-mediated ERK kinase and NF-kappaB activation in erythropoietin-promoted differentiation of astrocytes.

Erythropoietin (EPO), a hematopoietic factor, is also required for normal brain development, and its receptor is localized in brain. Therefore, it is possible that EPO could act as a neurotropic factor inducing differentiation of neurons. In the present study, we investigated whether EPO can promote differentiation of neuronal stem cells into astrocytes. In primary culture of cortical neuronal stem cells isolated from post neonatal (Day 1) rat brain, EPO dose (0.1-10U/ml) dependently promoted initiation of morphological differentiation of astrocyte and expression of an astrocyte marker protein, glial fibrillary acidic protein (GFAP). Expression of EPO receptor was also increased during morphological differentiation of astrocytes. EPO-induced increased morphological differentiation of astrocytes and GFAP expression were reduced by treatment with anti-EPO and EPO receptor antibodies. Since our previous study showed that activation of MAPK family and transcription factors is differentially involved in neuronal cell differentiation, we further determined the activation of MAP kinase family and NF-kappaB during morphological differentiation of astrocytes. Concomitant with the progression of the morphological differentiation of astrocytes, ERK(2) but not JNK(1) and p38 MAPK as well as NF-kappaB were activated. However, in the presence of PD98,059, an inhibitor of ERK, and salicylic acid, an NF-kappaB inhibitor, the EPO-induced morphological differentiation of astrocytes and expression of FGAP and EPO receptor were reduced. Conversely, treatment with anti-EPO and EPO receptor antibodies also reduced EPO-induced ERK(2) and NF-kappaB activation. These data demonstrate that EPO can promote differentiation of neuronal stem cells into astrocytes in an EPO receptor dependent manner, and this effect may be associated with the activation of ERK kinase and NF-kappaB pathway.

Animals↗

PubMed2004

Protein kinase B inhibits apoptosis induced by actinomycin D in ECV304 cells through phosphorylation of caspase 8.

Actinomycin D (act-D) anchors itself into DNA-base pairs by intercalation and thereby inhibits mRNA synthesis. It has been well established that act-D elicits apoptosis in various cell types involving endothelial cells. However, the regulatory mechanisms of actinomycin D-induced apoptotic cell death still remain unclear. Here, we investigated apoptotic cell death and its underlying regulatory mechanisms elicited by actinomycin D in ECV304. Act-D induced typical apoptotic features including chromatin condensation and translocation of phosphatidylserine. Since the phosphoinositide 3-OH kinase (PI3K)/protein kinase B (PKB) signaling pathway has been shown to prevent apoptosis in various cell types, it was of interest to determine if this pathway could protect against apoptosis induced by act-D. Inhibition of PI3K/PKB significantly increased act-D-induced apoptosis. Moreover, act-D-induced cell death was physiologically linked to PKB-mediated cell survival through caspase-8. These results suggest that cross-talk between the PKB and caspase-8 pathways may regulate the balance between cell survival and cell death in ECV304.

Apoptosis↗

PubMed2004

Novel biodegradable electrospun membrane: scaffold for tissue engineering.

Nonwoven fibrous matrixes have been widely used as scaffolds in tissue engineering, and modification of microstructure of these matrices is needed to organize cells in three-dimensional space with spatially balanced proliferation and differentiation required for functional tissue development. The objective of this study was fabrication of nanofibrous matrix from novel biodegradable poly(p-dioxanone-co-L-lactide)-block-poly(ethylene glycol) (PPDO/PLLA-b-PEG) copolymer, and to examine cell proliferation, morphology of cell-matrix interaction with the electrospun nanofibrous matrix. The electrospun structure composed of PPDO/PLLA-b-PEG fibers with an average diameters of 380 nm, median pore size 8 microm, porosity more than 80% and mechanical strength 1.4 MPa, is favorable for cell-matrix interaction and supports the active biocompatibility of the structure. NIH 3T3 fibroblast cell seeded on the structure tend to maintain phenotypic shape and guided growth according to nanofiber orientation. Good capability of the nanofibrous structure for supporting the cell attachment and proliferation are observed. This novel biodegradable scaffold will be applicable for tissue engineering based upon its unique architecture, which acts to support and guide cell growth.

3T3 Cells↗

PubMed2003

Novel polymeric micelles of amphiphilic triblock copolymer poly (p-dioxanone-co-L-lactide)-block-poly (ethylene glycol).

PURPOSE: The objective of this study is to characterize the micelles of novel block copolymer of poly (p-Dioxanone-co-L-Lactide)-block-Poly (ethylene glycol) (PPDO/PLLA-b-PEG-) and evaluate its ability to induce gene transfection. METHODS: The ability of the block copolymer to self-assemble was determined by viscometery, dye solublization, NMR spectra and dynamic light scattering. The Trypan blue assay for in vitro biocompatibility of the block copolymer was carried out with NIH 3T3, CT-26 and MCF-7 cells, and beta-glactosidase assay was applied to measure the transfection efficiency of the block copolymer on MCF-7 breast cancer cell. RESULTS: Depending on the block lengths and molecular weights, solubility of the polymeric samples in water was varied. Diluted aqueous solution properties of the copolymer were studied. 1,6-Diphenyl-1,3,5-hexatriene solubilization and 1H NMR spectra carried out in CDCl3 and D2O, were used to prove the existence of hydrophobic domains as the core of micelle. Average particle size of 60-165 nm with low polydispersity, and lower negative zeta potential of -3 to -14 mV were observed on the aqueous copolymer dispersion. Copolymer was found with almost no cytotoxic effect and was able to promote the transfection efficiency (about 3-fold) in MCF-7 cells. CONCLUSIONS: The PPDO/PLLA-b-PEG copolymer has ability to assemble into nanoscopic structures in aqueous environment, which enable to enhance gene transfection.

Animals↗

PubMed2003

The role of hydrogen peroxide produced by polychlorinated biphenyls in PMR1-deficient yeast cells.

Polychlorinated biphenyls (PCBs) are well-known recalcitrant environmental pollutants. Although the metabolism of the PCBs has been intensively studied, very little is known about their mechanism of toxicity in living organisms or how they are degraded. We have examined the effects of PCBs on two different yeast strains to determine their mechanism of action. One yeast strain (K601, wild type) is resistant to the growth-inhibitory effect of PCBs, whereas the other strain (AA542, PMR1 mutant) is susceptible. PCBs increased the level of intracellular hydrogen peroxide in AA542 cells but not in K601 cells. In the presence of alpha-tocopherol or ursolic acid the growth of AA542 cells was not inhibited by treatment with PCBs. These results suggest that PCBs block cell growth through production of hydrogen peroxide in the PMR1 mutant strain, AA542. We compared superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase activities in both strains. The catalase activity in K601 cells was 10 times higher than that in AA542 cells. In contrast, there was no difference in activities of SOD and GPx between the two strains. Collectively, these observations indicate that oxidative stress causes the inhibition of cell growth observed in catalase-deficient yeast cells exposed to PCBs.

Benzene Derivatives↗

PubMed2002

Isolation of pathogen-induced Chinese cabbage genes by subtractive hybridization employing selective adaptor ligation.

We have developed a subtractive cloning method in which target sequences are effectively enriched by selective adaptor ligation and PCR after hybridization. In this method both tester and driver DNAs are digested with RsaI, ligated with the linker DNA containing a KpnI recognition site, and amplified by PCR. The tester DNA samples are divided into two aliquots, each digested with either RsaI or KpnI. The two DNA samples are then combined and hybridized with an excess of the driver DNA retaining the linker. After hybridization, the DNA mixture is ligated to a new adaptor compatible only with double-stranded tester/tester DNAs. Therefore, only the tester/tester is selectively amplified in subsequent PCR. This also leads to complete elimination of the tester DNA hybridized with driver DNA from the tester DNA population. Although our protocol employs enzymatic treatments, the efficiency of the enzymatic treatments does not affect the subtraction efficiency. This new subtractive enrichment method was applied to isolate Chinese cabbage defense-related genes induced by Pseudomonas syringae pv. tomato (Pst), which elicits a hypersensitive response in Chinese cabbage. After two or three rounds of subtractive hybridization, the sequences of enriched DNAs were determined and examined by BLAST analysis. Northern blot hybridization showed that 12 of the 19 genes analyzed were strongly induced by Pst treatment. Among the 12 Pst-induced genes five represent pathogenesis-related genes encoding PR1a, two chitinases, a thaumatin-like protein, and a PR4 protein. Other Pst-induced genes include two cytochrome P450 genes responsible for glucosinolate biosynthesis, a disease resistance gene homolog, and several genes encoding proteins with unknown functions.

Brassica rapa↗