PubMed Health⌕ Search

Biomedical subjects

Han-Gon Choi

Publications and source records attributed to Han-Gon Choi.

29 records · Page 2Linked to original sources
PubMed2004

Preparation of ibuprofen-loaded liquid suppository using eutectic mixture system with menthol.

To prepare an ibuprofen-loaded liquid suppository using eutectic mixture with menthol, the effects of menthol and poloxamer 188 (P 188) on the aqueous solubility of ibuprofen were investigated. The physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of ibuprofen, menthol and P 188 were investigated. Then, the pharmacokinetic study of ibuprofen delivered by the liquid suppositories composed of P 188 and menthol were then performed. In the absence of P 188, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts of ibuprofen formed eutectic mixture with six parts of menthol. In the presence of P 188, the solutions with the same ratio showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without additives and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Ibuprofen increased the gelation temperature and weakened the gel strength and bioadhesive force of liquid suppositories. However, menthol did the opposite due to forming the eutectic mixture with ibuprofen. The ibuprofen-loaded liquid suppository [P 188/menthol/ibuprofen (15/0.25/2.5%)] with the maximum ibuprofen solubility of 1.2mg/ml was administered easily to the anus and to remain at the administered site without leakage after the dose. Furthermore, it gave significantly higher initial plasma concentrations, Cmax and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the liquid suppository system with P 188 and menthol, a more convenient and effective rectal dosage form for ibuprofen will be expected to enhance the rectal bioavailability of ibuprofen.

Animals↗
PubMed2004

Induction of cytochrome P450s by rutaecarpine and metabolism of rutaecarpine by cytochrome P450s.

Rutaecarpine is an alkaloid originally isolated from the unripe fruit of Evodia rutaecarpa. Recently, rutaecarpine has been characterized to have an anti-inflammatory activity through cyclooxygenase-2 inhibition. In the present studies, the effects of rutaecarpine on liver cytochrome P450 s (P450s) and P450 s involved in the metabolism of rutaecarpine were studied in vivo and in vitro, respectively, because the data are crucial in the early development of rutaecarpine as a new drug candidate. Oral administration to male ICR mice of rutaecarpine for 3 consecutive days induced liver P450 1A-, 2B- and 2E1-selective monooxygenase activities. The induction of P450 1A and 2B by rutaecarpine was confirmed by Western immunoblotting. When rutaecarpine was incubated with rat liver microsomes in the presence of an NADPH-generating system, five metabolites were detected by UV and mass spectral analyses. The 3-methylcholanthrene- and phenobarbital-induced microsomes greatly increased the formation of metabolites. Our present results suggest that rutaecarpine might induce P450 1A and 2B in mice, and that P450 1A and 2B might predominantly metabolize rutaecarpine in rat liver microsomes.

Alkaloids↗
PubMed2004

Dual inhibition of cyclooxygenases-2 and 5-lipoxygenase by deoxypodophyllotoxin in mouse bone marrow-derived mast cells.

Deoxypodophyllotoxin (Anthricin) is a medicinal herbal product isolated from Anthriscus sylvestris HOFFM. that inhibits cyclooxygenase-2 (COX-2) and COX-1-dependent phases of prostaglandin D(2) (PGD(2)) generation in bone marrow-derived mast cells (BMMC) in a concentration-dependent manner with IC(50) values of 1.89 microM and 65.3 microM, respectively. This study also found that this compound inhibited COX-1 and 2-dependent conversion of the exogenous arachidonic acid to PGD(2) in a dose-dependent manner with an IC(50) values of 0.01 microM and 12.1 microM, respectively using a COX enzyme assay kit. However, this compound did not inhibit COX-2 protein expression up to a concentration of 30 microM in the BMMC, indicating that deoxypodophyllotoxin directly inhibits COX-2 activity. Furthermore, this compound consistently inhibited the production of leukotriene C(4) (LTC(4)) in a dose dependent manner, with an IC(50) value of 0.37 microM. These results demonstrate that deoxypodophyllotoxin has a dual cyclooxygenase-2 selective/5-lipoxygenase inhibitory activity, and therefore this compound might provide a basis for novel anti-inflammatory drugs.

Animals↗
PubMed2003

Effect of sodium chloride on the release, absorption and safety of diclofenac sodium delivered by poloxamer gel.

Poloxamer solutions prepared with poloxamers and sodium chloride were previously reported to undergo a phase transition to bioadhesive gels at body temperature. For the development of a thermosensitive diclofenac sodium-loaded poloxamer gel, here we investigated the effect of sodium chloride on the release, safety and rectal absorption in rats of diclofenac sodium delivered by the poloxamer gels. P 188 delayed the release rates of diclofenac sodium from poloxamer gels. However, sodium chloride showed no significant effect on the release rates of diclofenac sodium from poloxamer gels. Release mechanism analysis showed the release of diclofenac sodium was proportional to the time. The initial plasma concentrations of diclofenac sodium in the rectal formulation [diclofenac sodium/poloxamer 407 (P 407)/poloxamer 188 (P 188)/sodium chloride (2.5/15/17/0.8%)] were significantly higher compared with those in semi-solid suppository. Furthermore, it gave significantly faster Tmax of diclofenac sodium than did semi-solid suppository, indicating that the diclofenac sodium from poloxamer gel could be absorbed faster than that from semi-solid one in rats. It did not cause any morphological damage to the rectal tissues. These results suggested that poloxamer gel with sodium chloride could be a more effective and safe rectal delivery system of diclofenac sodium.

Absorption↗
PubMed2003

Synthesis and evaluation of Ketorolac ester prodrugs for transdermal delivery.

Alkyl esters of ketorolac were synthesized as potential prodrugs for transdermal delivery and evaluated to determine the relationship between their skin permeation characteristics and their physicochemical properties. Solubility of the prodrugs in various vehicles was determined at room temperature while lipophilicity was obtained as 1-octanol/water partition coefficients (logP) and capacity factors (k') using HPLC. Metabolism of the prodrugs to ketorolac was studied both in rat skin homogenate and in plasma. Rat skin permeation characteristics of the prodrugs saturated in propylene glycol were investigated using the Keshary-Chien permeation system at 37 degrees C. An increase in logP and capacity factor values of the prodrugs were observed in proportion to their alkyl chain length. Good linear relationship between the logP values and capacity factor was observed (r(2) = 0.92). Prodrugs were rapidly degraded to ketorolac both in the skin homogenate and in plasma following a first-order kinetics. To determine accurate amounts of prodrug permeated, both the prodrug and parent drug concentration in the receptor solution were determined in mole units. The skin permeation rate of the alkyl ester prodrugs was significantly higher with a shorter lag time than that of ketorolac. The permeation rate of ketorolac reached maximum in its 1-propyl ester form as 46.61 nmol/cm(2)/h, and a parabolic relationship was observed between the permeation rate and the logP values of the prodrugs. Alkyl ester prodrugs of ketorolac having optimum lipophilicity could improve the transdermal delivery of ketorolac.

Administration, Cutaneous↗
PubMed2003

Physicochemical characterization and in vivo evaluation of thermosensitive diclofenac liquid suppository.

Liquid suppository systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and mucoadhesive to the rectal tissues without leakage after the dose. However, a liquid suppository containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a liquid suppository system using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the liquid suppository was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The liquid suppositories with less than 1.0% of sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage. Furthermore, liquid suppository gave significantly higher initial plasma concentrations and faster Tmax of diclofenac sodium than did solid suppository, indicating that drug from liquid suppository could be absorbed faster than that from solid one in rats. Our results suggested that a thermosensitive liquid suppository system with sodium chloride and poloxamers was a more physically stable, convenient and effective rectal dosage form for diclofenac sodium.

Adhesiveness↗
PubMed2003

Physicochemical characterization of diclofenac sodium-loaded poloxamer gel as a rectal delivery system with fast absorption.

Rectal poloxamer gel systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and were mucoadhesive to the rectal tissues without leakage after the dose. However, a poloxamer gel containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a poloxamer gel using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength, and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers, and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the poloxamer gel was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The poloxamer gels with less than 1.0% sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage, and were retained in the rectum of rats for at least 6 hr. Furthermore, poloxamer gel gave significantly higher initial plasma concentrations and faster Tmax of diclofenac sodium than did solid suppository, indicating that drug from poloxamer gel could be absorbed faster than that from the solid one in rats. Our results suggested that a rectal poloxamer gel system with sodium chloride and poloxamers was a more physically stable, convenient, and effective rectal dosage form for diclofenac sodium.

Adhesiveness↗
PubMed2003

Improvement of dissolution and bioavailability of nitrendipine by inclusion in hydroxypropyl-beta-cyclodextrin.

A significant increase in solubility and dissolution rate of nitrendipine, a slightly soluble calcium channel blocker, was achieved by inclusion complexation with hydroxypropyl-beta-cyclodextrin (HP-beta-CD). The inclusion complex was prepared by solvent evaporation method and characterized by phase solubility method, x-ray diffractometry, infrared spectroscopy, and differential scanning calorimetry. The solubility of nitrendipine increased linearly as a function of HP-beta-CD concentration, resulting in AL-type phase solubility diagram which revealed a formation of inclusion complex in a molar ratio of 1:1, with the apparent association constant of 108.3M(-1). The in vitro dissolution rate of nitrendipine in pH 7.4 phosphate buffer was in the order of inclusion complex, physical mixture, and nitrendipine powder. These three different forms of nitrendipine were administered orally to rats with a dose of 10 mg/kg equivalent to nitrendipine. The AUC of inclusion complex was significantly larger than that of nitrendipine powder. Tmax of inclusion complex was significantly shorter and Cmax was significantly higher than those of nitrendipine powder. Cmax of physical mixture was higher than that of nitrendipine powder. Tmax of physical mixture, however, remained the same. The results indicated that the bioavailability of nitrendipine could be improved markedly by inclusion complexation, possibly due to an increased dissolution rate.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2002

Relation of dynamic changes in interfacial tension to protein destabilization upon emulsification.

The objective of this study was to link conformational changes of proteins at a water/methylene chloride interface to their destabilization upon emulsification. When 4 aqueous protein solutions (bovine serum albumin, beta-lactoglobulin, ovalbumin, or ribonuclease) were emulsified in methylene chloride, considerable proportions of all the proteins became water insoluble aggregates. There were also noticeable changes in the compositions of their water-soluble species. A series of water/methylene chloride interfacial reactions upon the proteins was considered a major cause of the phenomena observed. Based on this supposition, the interfacial tension was determined by a Krüss DVT-10 drop volume tensiometer under various experimental conditions. It substantiated that the interfacial tension was high enough to cause the adsorption of all the proteins. Under our experimental conditions, their presence in the aqueous phase resulted in reductions of the interfacial tension by the degrees of 8.5 - 17.1 mN m(-1). In addition, dynamic changes in the interfacial tension were monitored to compare relative rates at which the adsorbed proteins underwent conformational, structural rearrangements at the interface. Such information helped make a prediction about how easily proteins would denature and aggregate during emulsification. Our study indicated that emulsifying aqueous protein solutions in organic solvents should be handled with care, due to adverse interfacial effects.

Algorithms↗
PubMedDate not supplied

Improved solubility and in vitro dissolution of Ibuprofen from poloxamer gel using eutectic mixture with menthol.

To improve the solubility and in vitro dissolution of poorly water-soluble ibuprofen with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution study of ibuprofen delivered by poloxamer gels composed of poloxamer 188 and menthol were performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6, followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that 4 parts of ibuprofen formed eutectic mixture with 6 parts of menthol. In the presence of poloxamer 188, the solutions with the same ratio of menthol to ibuprofen showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without poloxamer and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2 mg/ml. Menthol improved the dissolution rates of ibuprofen from poloxamer gels. Dissolution mechanism showed that the dissolution rate of ibuprofen from the poloxamer gels without menthol was independent of the time, but the drug might be dissolved from the poloxamer gels with menthol by Fickian diffusion. Thus, the poloxamer gels developed using eutectic mixture with menthol, which gave the improved solubility and dissolution of drug, are potential candidates for ibuprofen-loaded transdermal and rectal delivery system.

Anti-Inflammatory Agents, Non-Steroidal↗