Biomedical subjects

Han-Ping D Shieh

Publications and source records attributed to Han-Ping D Shieh.

5 recordsLinked to original sources

PubMed2006

Time-multiplexed three-dimensional displays based on directional backlights with fast-switching liquid-crystal displays.

An autostereoscopic display using a directional backlight with a fast-switching liquid-crystal (LC) display was designed and fabricated to obtain a better perception of 3D images by enhanced resolution and brightness. A grooved light guide in combination with an asymmetric focusing foil was utilized to redirect the emitting cones of light to the left and right eyes, respectively. By designing the groove structures of the focusing foil with rotation from -1.5 degrees to 1.5 degrees in the gradient and having the pitch ratio of the grooved light guide to the focusing foil of less than 3, the boundary angle then shifts from normal viewing and the moiré phenomenon can be suppressed. Cross talk of less than 6% and a LC response time of faster than 7.1 ms further improve the stereoscopic image perception. Additionally, 2D-3D compatibility is provided.

Journal Article↗

PubMed2006

High-transmission hybrid-effect-assisted nanoaperture.

We present a C-aperture encircled by a groove that makes possible the hybrid effect of coupling surface plasmon resonance to propagating waves. Compared to a single C aperture, the groove-encircled aperture can increase transmission by a factor of 2.45 in the near field and by a factor of 1.88 in the far field, showing good agreement with our theoretical calculation.

Journal Article↗

PubMed2004

Performance of a write-once multilayer optical disk that uses transparent recording material with an optical switching layer.

A volumetric optical disk that has multiple transparent films with optical switching layers is used as a recording medium to increase the number of recording layers. In the disk the optical switching layer is adapted to reduce decay of laser energy and increase reading and recording sensitivity. Well-defined marks of approximately 100-nm depth can be placed precisely on the transparent films by a focused laser beam. Writing and reading of a four-layer recordable disk, fabricated by molding and spin bonding, have been demonstrated experimentally. The volumetric disk can achieve a high recording capacity with conventional optical pickups.

Journal Article↗

PubMed2004

Polarized backlight based on selective total internal reflection at microgrooves.

A polarized backlight for LCD illumination is designed and fabricated in which s-polarized light is extracted owing to selective total internal reflection at microstructures in the anisotropic layer. From the measurement, the contrast ratio in normal viewing direction can be as high as 64. Luminous uniformity of higher than 80% is achieved for polarized backlights. Furthermore, 1.6 gain in efficiency is obtained aiming for high-efficiency LCD illumination.

Journal Article↗

PubMed2004

Design and fabrication of an integrated polarized light guide for liquid-crystal-display illumination.

An integrated polarized light guide was designed and fabricated for use as a liquid-crystal backlight with emphasis on uniformity of the light and conversion of p-polarized to s-polarized light. Two different micro-optical structures were fabricated both on the top and the bottom surfaces of the light guide. On the top surface, a subwavelength grating separates s-polarized and p-polarized light to achieve a polarization-conversion efficiency of 69%. A 1.7 gain factor of polarization efficiency was obtained to increase the utility of light for liquid-crystal illumination.

Journal Article↗