PubMed Health⌕ Search

Biomedical subjects

Hans P Merkle

Publications and source records attributed to Hans P Merkle.

At least 19 recordsLinked to original sources
PubMed2006

The preservation of phenotype and functionality of dendritic cells upon phagocytosis of polyelectrolyte-coated PLGA microparticles.

Biodegradable microparticles (MP) represent a promising and efficient delivery system for parenteral vaccination. Recently, MP have also been explored as tool for the ex vivo antigen loading of professional antigen-presenting cells such as dendritic cells (DC) to be used as cellular vaccines. The purpose of this study was to investigate various polycationic coatings on poly(lactide-co-glycolide) (PLGA) MP, with regard to their effect on phenotypic and functional maturation of monocyte-derived DC (MoDC) that had previously been loaded with the MP in vitro. The preparation and concomitant coating of the PLGA was performed by means of a solvent extraction/evaporation method using a recently developed microextrusion-based technique. The polyelectrolytes tested for MP coating encompassed aminodextran, chitosan, poly(ethylene imine) (PEI), poly(L-lysine) and protamine. Uncoated and differently coated PLGA MP were fed to immature MoDC, which ingested efficiently the different MP types irrespective of their surface coating. The MP-loaded immature MoDC were then matured with the help of a cytokine/PGE-2 maturation cocktail. Here, the presence of the ingested MP did not affect the MoDC maturation in terms of expression of the surface markers CD80, CD83, CD86, HLA-DR and MMR, irrespective of the MP surface coating. Importantly, none of the PLGA MP types alone induced significant maturation of MoDC in the absence of the maturation cocktail. MP-loaded and subsequently matured MoDC expressed high levels of the chemokine receptor CCR7, whose functional activity was evidenced by the migration of MoDC towards CCL21, irrespective of the presence of ingested MP. Further, MP-loaded and subsequently matured MoDC also secreted comparable amounts of IL-10 and IL-12p70, irrespective of the presence of ingested MP except for PEI-coated PLGA MP, which enhanced significantly the secretion of IL-12p70 in mature MoDC. In conclusion, phenotypic and functional maturation of MoDC by means of a maturation cocktail remained unchanged irrespective of the presence of previously ingested differently coated PLGA MP. This offers interesting perspectives for using these particulate systems together with entrapped antigens for ex vivo loading of MoDC in view of cellular immunotherapy.

Cell Proliferation↗
PubMed2006

Control of in vitro tissue-engineered bone-like structures using human mesenchymal stem cells and porous silk scaffolds.

Natural bone consists of cortical and trabecular morphologies, the latter having variable pore sizes. This study aims at engineering different bone-like structures using scaffolds with small pores (112-224 microm) in diameter on one side and large pores (400-500 microm) on the other, while keeping scaffold porosities constant among groups. We hypothesized that tissue engineered bone-like structure resulting from silk fibroin (SF) implants is pre-determined by the scaffolds' geometry. To test this hypothesis, SF scaffolds with different pore diameters were prepared and seeded with human mesenchymal stem cells (hMSC). As compared to static seeding, dynamic cell seeding in spinner flasks resulted in equal cell viability and proliferation, and better cell distribution throughout the scaffold as visualized by histology and confocal microscopy, and was, therefore, selected for subsequent differentiation studies. Differentiation of hMSC in osteogenic cell culture medium in spinner flasks for 3 and 5 weeks resulted in increased alkaline phosphatase activity and calcium deposition when compared to control medium. Micro-computed tomography (microCT) detailed the pore structures of the newly formed tissue and suggested that the structure of tissue-engineered bone was controlled by the underlying scaffold geometry.

Biocompatible Materials↗
PubMed2006

Osteogenesis by human mesenchymal stem cells cultured on silk biomaterials: comparison of adenovirus mediated gene transfer and protein delivery of BMP-2.

Bone tissue engineering, gene therapy based on human mesenchymal stem cells (MSCs) and silk fibroin biomaterials were combined to study the impact of viral transfection on MSC osteogenic performance in vitro. MSCs were transduced with adenovirus containing a human BMP-2 (Ad-BMP-2) gene at clinically reasonable viral concentrations and cultured for 4 weeks. Controls with nontransfected MSCs, but exposed to exogenous BMP-2 concentrations on an analogous time profile as that secreted by the Ad-BMP-2 group, were compared. Both the Ad-BMP-2 MSC group and the exogenous protein BMP-2 group strongly expressed osteopontin and bone sialoprotein. Cells secreted a matrix that underwent mineralization on the silk fibroin scaffolds, forming clusters of osseous material, as determined by micro-computed tomography. The expression of osteogenic marker proteins and alkaline phosphatase was significantly higher in the Ad-BMP-2 MSC group than in the exogenous protein BMP-2 group, and no significant differences in mineralization were observed in two of the three MSC sources tested. The results demonstrate that transfection resulted in higher levels of expression of osteogenic marker genes, no change in proliferation rate and did not impact the capacity of the cells to calcify tissues on these protein scaffolds. These findings suggest additional options to control differentiation where exogenous additions of growth factors or morphogens can be replaced with transfected MSCs.

Adenoviridae↗
PubMed2006

The support of adenosine release from adenosine kinase deficient ES cells by silk substrates.

Adenosine kinase deficient (Adk-/-) embryonic stem cells (ESCs) encapsulated in synthetic polymers have previously been shown to provide therapeutic adenosine release and transient seizure suppression in epileptic rats. Here we explored the utility of biopolymer-substrates to promote long-term adenosine release from Adk-/- ESCs. Three different substrates were studied: (1) type I collagen (Col-1), (2) silk-fibroin (SF), and (3) poly(L-ornithine) (PO) coated tissue culture plastic. Adk-/- or wild type (wt) ESC-derived glial precursor cells were seeded on the substrates and cultured either in proliferation medium containing growth factors or in differentiation medium devoid of growth factors. In proliferation medium cell proliferation was higher and metabolic activity lower on Col-1 and PO substrates as compared to SF. Cells from both genotypes readily differentiated into astrocytes after growth factor removal on all substrates. Adk-/- cells cultured on biopolymers released significantly more adenosine than their wt counterparts at all developmental stages. Adenosine release was similar on SF and PO substrates and the amounts released from Adk-/- cells (>20 ng/ml) were considered to be of therapeutic relevance. Taken together, these results suggest that silk matrices are particularly suitable biomaterials for ESC encapsulation and for the design of adenosine releasing bioincubators for the treatment of epilepsy.

Adenosine↗
PubMed2006

The cell penetrating peptides pVEC and W2-pVEC induce transformation of gel phase domains in phospholipid bilayers without affecting their integrity.

The cell penetrating peptide (CPP) pVEC has been shown to translocate efficiently the plasma membrane of different mammalian cell lines by a receptor-independent mechanism without exhibiting cellular toxicity. This ability renders CPPs of broad interest in cell biology, biotechnology, and drug delivery. To gain insight into the interaction of CPPs with biomembranes, we studied the interaction of pVEC and W2-pVEC, an Ile --> Trp modification of the former, with phase-separated supported phospholipid bilayers (SPB) by atomic force microscopy (AFM). W2-pVEC induced a transformation of dipalmitoyl phosphatidylcholine (DPPC) domains from a gel phase state via an intermediate state with branched structures into essentially flat bilayers. With pVEC the transformation followed a similar pathway but was slower. Employing fluorescence polarization, we revealed the capability of the investigated peptides to increase the fluidity of DPPC domains as the underlying mechanism of transformation. Due to their tighter packing, sphingomyelin (SM) domains were not transformed. By combination, AFM observations, dynamic light scattering studies, and liposome leakage experiments indicated that bilayer integrity was not compromised by the peptides. Transformation of gel phase domains in SPB by CPPs represents a novel aspect in the discussion on uptake mechanisms of CPPs.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2005

One-step preparation of polyelectrolyte-coated PLGA microparticles and their functionalization with model ligands.

This work aimed at the development of a novel surfactant-free, one-step process for the concomitant formation of poly(lactide-co-glycolide) (PLGA) microparticles (MP) and surface coating with the polyelectrolyte chitosan, which is suitable for subsequent covalent conjugation of bioactive ligands. The technology is based on solvent extraction from an O/W-dispersion using a static micromixer. Surface coating occurred through interaction of the negatively charged, nascent PLGA MP with the polycationic chitosan, which was dissolved in the aqueous extraction fluid. Particles of 1-10 mum in diameter were produced with excellent reproducibility. The chitosan-coated PLGA MP were spherical and showed a smooth surface without pores, as demonstrated by scanning electron microscopy (SEM). The chitosan coatings were characterized by zeta potential measurements and X-ray photoelectron spectroscopy (XPS). The functional amino groups of chitosan were used to conjugate two model ligands to the coating, i.e. fluorescamine and NHS-PEG-biotin. The presence of the conjugated ligands was revealed by confocal laser scanning microscopy (CLSM) and fluorescence activated cell sorting (FACS). Evidence for biotinylation was demonstrated through binding of fluorescently labelled streptavidin. The developed platform technology is straightforward and flexible. Future studies will focus on the design of microparticulate carriers with bioactive surfaces, e.g. as antigen delivery systems.

Biocompatible Materials↗
PubMed2005

Encapsulation of proteins and peptides into biodegradable poly(D,L-lactide-co-glycolide) microspheres prolongs and enhances antigen presentation by human dendritic cells.

Dendritic cell (DC)-based immunotherapy has been hampered by the lack of suitable methods for antigen delivery. Here, we use biodegradable poly(D,L-lactide-co-glycolide) microspheres (PLGA-MS) as carriers of peptides and proteins for antigen delivery to human monocyte-derived DC (MoDC). Compared to soluble proteins, MHC classes I and II-restricted presentation of PLGA-MS-encapsulated proteins and peptides by MoDC was markedly prolonged and proteins were presented 50-fold more efficiently on class I molecules. The vaccination of mice with DC loaded with PLGA-MS-encapsulated proteins raised strong and persisting cytotoxic T cell responses. In conclusion, antigen delivery via PLGA-MS markedly enhanced the duration of antigen presentation by human MoDC and the potency of DC-based vaccination.

Animals↗
PubMed2005

Membrane surface-associated helices promote lipid interactions and cellular uptake of human calcitonin-derived cell penetrating peptides.

hCT(9-32) is a human calcitonin (hCT)-derived cell-penetrating peptide that has been shown to translocate the plasma membrane of mammalian cells. It has been suggested as a cellular carrier for drugs, green fluorescent protein, and plasmid DNA. Because of its temperature-dependent cellular translocation resulting in punctuated cytoplasmatic distribution, its uptake is likely to follow an endocytic pathway. To gain insight into the molecular orientation of hCT(9-32) when interacting with lipid models, and to learn more about its mode of action, various biophysical techniques from liposome partitioning to high-resolution NMR spectroscopy were utilized. Moreover, to establish the role of individual residues for the topology of its association with the lipid membrane, two mutants of hCT(9-32), i.e., W30-hCT(9-32) and A23-hCT(9-32), were also investigated. Although unstructured in aqueous solution, hCT(9-32) adopted two short helical stretches when bound to dodecylphosphocholine micelles, extending from Thr10 to Asn17 and from Gln24 to Val29. A23-hCT(9-32), in which the helix-breaking Pro23 was replaced by Ala, displayed a continuous alpha-helix extending from residue 12 to 26. Probing with the spin label 5-doxylstearate revealed that association with dodecylphosphocholine micelles was such that the helix engaged in parallel orientation to the micelle surface. Moreover, the Gly to Trp exchange in W30-hCT(9-32) resulted in a more stable anchoring of the C-terminal segment close to the interface, as reflected by a twofold increase in the partition coefficient in liposomes. Interestingly, tighter binding to model membranes was associated with an increase in the in vitro uptake in human cervix epithelial adenocarcinoma cell line cells. Liposome leakage studies excluded pore formation, and the punctuated fluorescence pattern of internalized peptide indicated vesicular localization and, in conclusion, strongly suggested an endocytic pathway of translocation.

Calcitonin↗
PubMed2005

Flow-through ultrasonic emulsification combined with static micromixing for aseptic production of microspheres by solvent extraction.

Final sterilisation of drug-loaded polymeric microspheres is problematic as dry heat or steam sterilisation are not applicable, and gamma-irradiation may result in radiolytic scission of the polymer chains, and potentially damage the bioactive compound. Therefore, aseptic production is the method of choice to obtain a sterile product. A novel process for the production of microspheres is introduced based on the principle of double emulsion-solvent extraction. The process uses a flow-through ultrasonic cell for the preparation of the primary emulsion, in combination with a static micromixer for the production of the double emulsion. Because of its small scale, the equipment is readily accommodated in a laminar air-flow cabinet or an isolator. Thanks to the low technical complexity and easy handling of the process, only minimal manual interventions is required. Finally, the possibility for in-place cleaning and sterilisation makes the equipment and process well suited for aseptic microsphere preparation. Microspheres were prepared from poly(lactic-co-glycolic acid) (PLGA), and bovine serum albumin (BSA) served as model protein for microencapsulation. The BSA-in-PLGA (w/o) emulsions produced by the ultrasonic flow-through cell exhibited mean droplet sizes of <700 nm. Further processing into microspheres of 15-40 microm mean diameter resulted in approx. 70% BSA encapsulation efficiency. Batch-to-batch reproducibility was excellent. Microsphere batches produced under aseptic conditions to assure product sterility exhibited no microbial contamination when examined by a simplified sterility test. The presented technology offers great potential for aseptic microsphere production for batch-sizes suitable, e.g. for clinical investigations. Complete validation of product sterility would, however, demand more extended tests.

Emulsions↗
PubMed2005

Bilayer interaction and localization of cell penetrating peptides with model membranes: a comparative study of a human calcitonin (hCT)-derived peptide with pVEC and pAntp(43-58).

Cell-penetrating peptides (CPPs) are able to translocate problematic therapeutic cargoes across cellular membranes. The exact mechanisms of translocation are still under investigation. However, evidence for endocytic uptake is increasing. We investigated the interactions of CPPs with phospholipid bilayers as first step of translocation. To this purpose, we employed four independent techniques, comprising (i) liposome buffer equilibrium dialysis, (ii) Trp fluorescence quenching, (iii) fluorescence polarization, and (iv) determination of zeta-potentials. Using unilamellar vesicles (LUVs) of different phospholipid composition, we compared weakly cationic human calcitonin (hCT)-derived peptides with the oligocationic CPPs pVEC and penetratin (pAntp). Apparent partition coefficients of hCT-derived peptides in neutral POPC LUVs were dependent on amino acid composition and secondary structure; partitioning in negatively charged POPC/POPG (80:20) LUVs was increased and mainly governed by electrostatic interactions. For hCT(9-32) and its derivatives, D values raised from about 100-200 in POPC to about 1000 to 1500 when negatively charged lipids were present. Localization profiles of CPPs obtained by Trp fluorescence quenching were dependent on the charge density of LUVs. In POPC/POPG, hCT-derived CPPs were located on the bilayer surface, whereas pVEC and pAntp resided deeper in the membrane. In POPG LUVs, an increase of fluorescence polarization was observed for pVEC and pAntp but not for hCT-derived peptides. Generally, we found strong peptide-phospholipid interactions, especially when negatively charged lipids were present.

Acrylamide↗
PubMed2005

Insulin-like growth factor I-releasing alginate-tricalciumphosphate composites for bone regeneration.

PURPOSE: Development and characterization of an in situ-forming, osteoconductive, and growth factor-releasing bone implant. METHODS: Injectable in situ-forming scaffolds were prepared from a 2% (m/v) alginate solution, tricalciumphosphate (TCP) granules, and poly(lactide-co-glycolide) microspheres (MS), loaded with the osteoinductive growth factor insulin-like growth factor I (IGF-I). Scaffolds were prepared by mixing the components followed by hydrogel formation through calcium carbonate-induced physical cross-linking of the alginate at slightly acidic pH. Physical-chemical properties and cell biocompatibility using osteoblast-like cells (MG-63 and Saos-2) of these scaffolds were investigated. RESULTS: The addition of TCP to the alginate resulted in reduced swelling and gelation time and an increase in stiffness. Osteoblast-like cells (MG-63 and Saos-2) did not show toxic reactions and adhered circumferentially to the TCP granules surface. The addition of the IGF-I MS resulted in an up to sevenfold increased proliferation rate of MG-63 cells as compared to scaffold preparations without IGF-I MS. The alkaline phosphate (ALP) activity-a parameter for osteblastic activity-increased with increasing amounts of TCP in Saos-2 loaded composite scaffolds. CONCLUSIONS: A prototype in situ-hardening composite system for conformal filling of bone defects supporting osteoblastic activity for further clinical testing in relevant fracture models was developed and characterized.

Alginates↗
PubMed2005

Microencapsulation by solvent extraction/evaporation: reviewing the state of the art of microsphere preparation process technology.

The therapeutic benefit of microencapsulated drugs and vaccines brought forth the need to prepare such particles in larger quantities and in sufficient quality suitable for clinical trials and commercialisation. Very commonly, microencapsulation processes are based on the principle of so-called "solvent extraction/evaporation". While initial lab-scale experiments are frequently performed in simple beaker/stirrer setups, clinical trials and market introduction require more sophisticated technologies, allowing for economic, robust, well-controllable and aseptic production of microspheres. To this aim, various technologies have been examined for microsphere preparation, among them are static mixing, extrusion through needles, membranes and microfabricated microchannel devices, dripping using electrostatic forces and ultrasonic jet excitation. This article reviews the current state of the art in solvent extraction/evaporation-based microencapsulation technologies. Its focus is on process-related aspects, as described in the scientific and patent literature. Our findings will be outlined according to the four major substeps of microsphere preparation by solvent extraction/evaporation, namely, (i) incorporation of the bioactive compound, (ii) formation of the microdroplets, (iii) solvent removal and (iv) harvesting and drying the particles. Both, well-established and more advanced technologies will be reviewed.

Chemistry, Pharmaceutical↗
PubMed2005

Decoding the entry of two novel cell-penetrating peptides in HeLa cells: lipid raft-mediated endocytosis and endosomal escape.

Cellular entry of peptide, protein, and nucleic acid biopharmaceuticals is severely impeded by the cell membrane. Linkage or assembly of such agents and cell-penetrating peptides (CPP) with the ability to cross cellular membranes has opened a new horizon in biomedical research. Nevertheless, the uptake mechanisms of most CPP have been controversially discussed and are poorly understood. We present data on two recently developed oligocationic CPP, the sweet arrow peptide SAP, a gamma-zein-related sequence, and a branched human calcitonin derived peptide, hCT(9-32)-br, carrying a simian virus derived nuclear localization sequence in the side chain. Uptake in HeLa cells and intracellular trafficking of N-terminally carboxyfluorescein labeled peptides was studied by confocal laser scanning microscopy and flow cytometry using biochemical markers in combination with quenching and colocalization approaches. Both peptides were readily internalized by HeLa cells through interaction with the extracellular matrix followed by lipid raft-mediated endocytosis as confirmed by reduced uptake at lower temperature, in the presence of endocytosis inhibitors and through cholesterol depletion by methyl-beta-cyclodextrin, supported by colocalization with markers for clathrin-independent pathways. In contrast to the oligocationic SAP and hCT(9-32)-br, interaction with the extracellular matrix, however, was no prerequisite for the observed lipid raft-mediated uptake of the weakly cationic, unbranched hCT(9-32). Transient involvement of endosomes in intracellular trafficking of SAP and hCT(9-32)-br prior to endosomal escape of both peptides was revealed by colocalization and pulse-chase studies of the peptides with the early endosome antigen 1. The results bear potential for CPP as tools for intracellular drug delivery.

Biological Transport↗
PubMed2005

Formulation aspects of biodegradable polymeric microspheres for antigen delivery.

Biodegradable microspheres (MS) have proven to be very useful antigen delivery systems that are ingested by immunocompetent cells and provide prolonged antigen release and lasting immunity thanks to sustained release of the microencapsulated material. This review provides an applicable summary of different formulation routes for the purpose of producing safe, qualified and efficacious products of microencapsulated peptide and protein antigens. We have brought to attention, with case examples, not only the most common means of improving the quality of microsphere formulations, i.e., the use of stabilising additives, but also less commonly known and applied approaches, e.g., ion pairing, novel polymer systems, solid-state and other innovative microencapsulation methods.

Antigens↗
PubMed2005

DNA-loaded biodegradable microparticles as vaccine delivery systems and their interaction with dendritic cells.

This paper provides a review of the role of dendritic cells (DC) in microparticle-mediated immune response and the advantages of associating DNA to microparticles in order to increase the potency of DNA vaccination in vivo. To begin with, different methods for the preparation of DNA-loaded microparticle with poly(lactide) (PLA)/poly(lactide-co-glycolide) (PLGA) polymers are presented. Further, the effects of DNA-loaded microparticles on DC in vitro are extensively examined including transfection and stimulation of DC, a key feature of the immune response. Finally, in vivo tracking of DNA-loaded microparticles and induction of immune responses upon DNA-loaded microparticle administration in different animal models and with various routes of administration are reviewed.

Adsorption↗
PubMed2005

Transport of surface-modified nanoparticles through cell monolayers.

We synthesized three peptides, a D-polyarginyl peptide (r8(FITC)), a Tat peptide (Tat(FITC)), and a control peptide (Cp(FITC)) and attached each to amino-CLIO, a nanoparticle 30 nm in diameter. We then examined the effective permeability, Peff, of all six materials through CaCo-2 monolayers. The transport of peptide-nanoparticles was characterized by a lag phase (0-8 h) and a steady-state phase (9-27 h). The steady-state Peff values for peptides were in the order r8(FITC)>Tat(FITC)=Cp(FITC). When r8(FITC) and Tat(FITC) peptides were attached to the nanoparticle, they conferred their propensity to traverse cell monolayers onto the nanoparticle, whereas Cp(FITC) did not. Thus, when the r8(FITC) peptide was attached to the amino-CLIO nanoparticle, the resulting peptide-nanoparticle had a Peff similar to that of this poly-D-arginyl peptide alone. The Peff of r8(FITC)-CLIO (MW approximately 1000 kDa) was similar to that of mannitol (MW=182 Da), a poorly transported reference substance, with a far lower molecular weight. These results are the first to indicate that the modification of nanoparticles by attachment of membrane-translocating sequence-based peptides can alter nanoparticle transport through monolayers. This suggests that the surface modification of nanoparticles might be a general strategy for enhancing the permeability of drugs and that high-permeability nanoparticle-based therapeutics can be useful in selected pharmaceutical applications.

Biological Transport↗
PubMed2004

Continuous contact- and contamination-free ultrasonic emulsification-a useful tool for pharmaceutical development and production.

A novel concept was developed here for the continuous, contact- and contamination-free treatment of fluid mixtures with ultrasound. It is based on exciting a steel jacket with an ultrasonic transducer, which transmitted the sound waves via pressurised water to a glass tube installed inside the jacket. Thus, no metallic particles can be emitted into the sonicated fluid, which is a common problem when a sonotrode and a fluid are in direct contact. Moreover, contamination of the fluid from the environment can be avoided, making the novel ultrasonic flow-through cell highly suitable for aseptic production of pharmaceutical preparations. As a model system, vegetable oil-in-water emulsions, fed into the cell as coarse pre-emulsions, were studied. The mean droplet diameter was decreased by two orders of magnitude yielding Sauter diameters of 0.5 microm and below with good repeatability. Increasing the residence time in the ultrasonic field and the sonication power both decreased the emulsion mean diameter. Furthermore, the ultrasonic flow-through cell was found to be well suited for the production of nanoparticles of biodegradable polymers by the emulsion-solvent extraction/ evaporation method. Here, perfectly spherical particles of a volume mean diameter of less than 0.5 microm could be prepared. In conclusion, this novel technology offers a pharmaceutically interesting platform for nanodroplet and nanoparticle production and is well suited for aseptic continuous processing.

Chemical Fractionation↗