Biomedical subjects
Publications and source records attributed to Hans-Hubert Borchert.
Chitosan is a topic of current research in pharmaceutics, medicine, biotechnology, and beyond. This note describes an improved quantification of chitosan using the dye Cibacron Brilliant Red 3B-A. The method is sensitive and of a good reproducibility and linearity in the range of 10-80 microg/mL.
A simple and rapid antigen-specific assay for the identification antibodies to platelets is lacking, yet. Red-dyed polystyrene microbeads were coated with monoclonal antibodies to various platelet glycoprotein complexes, and used for the detection of platelet autoantibodies and alloantibodies. The results were largely identical with those obtained by monoclonal antibody-specific immobilization of platelet antigen assay (MAIPA). The new test is reliable yet less complex and time-consuming than the currently available assays, and it can be implemented in any routine laboratory.
The objectives of this work were (i) to prepare physically stable cationic microparticles and (ii) to study the impact of the surface properties on microparticle phagocytosis and the phenotype of dendritic cells (DC). Protein loaded biodegradable microparticles from poly(lactic-co-glycolic acid) [PLGA] were produced in a micromixer-based w/o/w solvent evaporation procedure. Anionic particles were obtained by using polyvinyl alcohol (PVA) as stabilizing agent; for cationic surfaces cetyltrimethylammonium bromide (CTAB) and chitosan/PVA or DEAE-dextran/PVA blends were evaluated. In phagocytosis studies human monocytes and monocyte-derived DC were incubated with microparticles and analysed by flow cytometry. While CTAB modified microparticles lost their positive charge and aggregated due to CTAB desorption from the particle surface, the modification with chitosan and DEAE-dextran resulted in stable microparticles without cell toxicity. Due to a very low endotoxin content, phagocytosis of anionic and cationic microparticles did not induce an upregulation of maturation-associated surface markers on DC. DEAE-dextran modified microparticles showed an enhanced model protein delivery into phagocytic cells. Overall, PLGA microparticles are suitable vehicles for protein delivery to DC, which might be used for DC-based cell therapies.
Incorporation of pH modifiers is a commonly used strategy to enhance the dissolution rate of weakly basic drugs from sustained release solid dosage forms. Electron paramagnetic resonance imaging (EPRI) was applied to spatially monitor pH(M) and the rotational correlation time (tau(R)), a parameter which is closely related to the surrounding microviscosity inside HPMC (hydroxypropylmethylcellulose) matrix tablets. Fumaric, citric, and succinic acid were employed as pH modifiers. 4-(methylamino)-2-ethyl-5,5-dimethyl-4-pyridine-2-yl-2,5-dihydro-1H-imidazole-1-oxyl (MEP) was used as spin label. Fumaric and citric acid reduced the pH(M) to equal extents in the initial phase. With the progress of hydration, the more soluble citric acid diffused out from the tablet resulting in an increase in pH(M), originating at the outer layers. In contrast, fumaric acid maintained a constantly reduced pH(M) inside the entire tablet. Due to its lower acidic strength, succinic acid did not reduce the pH(M) as effectively as the other pH modifiers used. The more water-soluble acids stimulated the water penetration into the matrix system, thereby rapidly decreasing tau(R). Once the matrix tablets were hydrated, the included pH modifiers influenced tau(R) insignificantly. EPRI, a novel approach for monitoring pH(M) and tau(R) non-invasively and spatially resolved, was used successfully for the optimization of an pH-controlled formulation.
BACKGROUND: The antigen-specific assays currently used for characterization of platelet (PLT)-reactive auto- and alloantibodies are too technically complex and impracticable for most routine laboratories. Here, a novel antigen-specific particle assay (ASPA) for PLTs similar to that of red blood cells is described. STUDY DESIGN AND METHODS: PLTs were solubilized and then incubated with red-dyed polystyrene particles coated with monoclonal antibodies (MoAbs) to various PLT glycoprotein complexes. These particles were directly tested for coating with autoantibodies (n = 8) or indirectly tested for serum autoantibodies (n = 33) or alloantibodies against HPA-1a (n = 4) or HPA-5b (n = 5). Serum samples from healthy blood donors (n = 100) served as negative controls. RESULTS: Negative reactions were clearly distinguishable from positive reactions, and the results of the particle assay were in concordance with those obtained by the standard MoAb-specific immobilization of PLT antigen assay (MAIPA) in all cases with alloanti-bodies. In three patients, only the ASPA was able to detect autoantibodies that were completely undetectable by the MAIPA. In contrast, in only one patient, the MAIPA detected autoantibodies that the ASPA failed to detect. CONCLUSION: In our opinion, the new ASPA is reliable, yet less complex and time-consuming than the currently available assays, and it can be implemented in any routine laboratory.
Dry skin and other skin disorders such as atopic dermatitis are characterized by impaired stratum corneum (SC) barrier function and by an increase in transepidermal water loss (TEWL) leading to a decrease in skin hydration. The possibility that dermatological and cosmetic products containing SC lipids could play a part in the restoration of disturbed skin barrier function is of great interest in the field of dermatology and cosmetics. The aim of the present study was to evaluate the effect of positively charged oil/water nanoemulsions (PN) containing ceramide 3B and naturally found SC lipids (PNSC) such as ceramide 3, cholesterol, and palmitic acid on skin hydration, elasticity, and erythema. Creams of PNSC were compared to PN creams, to creams with negatively charged o/w nanoemulsion and SC lipids (NNSC) and to Physiogel cream, a SC lipid containing formulation, which is already on the market. The formulations (PN, PNSC, and NNSC) were prepared by high-pressure homogenization. After adding Carbopol 940 as thickener, particle size and stability of the creams were not significantly changed compared to the nanoemulsions. The studies were carried out on three groups, each with 14 healthy female test subjects between 25 and 50 years of age, using Corneometer 825, Cutometer SEM 575 and Mexameter 18 for measurements of skin hydration, elasticity, and erythema of the skin, respectively. The creams were applied regularly and well tolerated throughout the study. All formulations increased skin hydration and elasticity. There was no significant difference between PNSC and Physiogel. However, PNSC was significantly more effective in increasing skin hydration and elasticity than PN and NNSC indicating that phytosphingosine inducing the positive charge, SC lipids and ceramide 3B are crucial for the enhanced effect on skin hydration and viscoelasticity.
The cellular immune response against tumors, viruses, or intracellular bacteria requires adequate antigen delivery to professional phagocytes, their processing and the presentation of antigenic peptides to T-cells. Biodegradable microparticles to enhance antigen phagocytosis and the response of cytotoxic lymphocytes have been proposed. The aim of the present study was to formulate poly(lactide-co-glycolide) (PLGA) microparticles using a w/o/w solvent evaporation procedure in order to obtain suitable vehicles for vaccination. Bovine serum albumin bearing fluorescein isothiocyanate (FITC-BSA) was used as a model antigen. For microparticle preparation a static micromixer was employed. Microparticles of 2-3 microm can be produced with good reproducibility by applying high flow rates at the micromixer. Microparticles with a smooth surface and only one pore were observed using scanning electron microscopy (SEM). Confocal laser scanning microscopy (CLSM) allowed localisation of the FITC-BSA near the surface of the microparticle. Microencapsulation of FITC-BSA did not altered the polymer characteristics, as determined by measuring the glass transition temperature. Additionally we could determine residual methylene chloride, employed as solvent in microparticle preparation, to be less than 1/1000 of the USP and Ph. Eur. limit. The microparticles described herein were able to deliver the model antigen to human dendritic cells (DC).
Positively charged oil/water (o/w) nanoemulsions (PN) are effective vehicles to change the permeability of the skin. This study focused on the preparation and characterisation of phytosphingosine (PS) containing PN (PPN) which serve as colloidal carriers for the dermal application of ceramide IIIB (CIIIB) and the stratum corneum (SC) lipids (PPNSC) such as ceramide III (CIII), cholesterol, and palmitic acid. The investigations were conducted using appropriate emulsification and homogenisation processing conditions to optimise PPNSC with regard to droplet size, physical stability, and solubility of PS, CIII and CIIIB. A decrease in droplet size was observed through eight homogenisation cycles at a pressure of 500 bar and a temperature of 50 degrees C. Above these optimal values, an increase in droplet size was observed. PS and ceramides have low solubilities in oil and water. When Lipoid E-80 (LE80) was added to the oil phase, the solubility of PS and ceramides increased, indicating some interactions shown by DSC measurements. SC lipids and CIIIB could be successfully incorporated in PPN without producing any physical instability. The high stability of PPNSC is probably due to the presence of a hydrophilic (Tween 80) and a lipophilic surfactant (LE80), supported by the lipophilic cosurfactant PS, at the o/w interface. It was shown that PS was responsible for the positive charge and thus supported the high physical stability of PPNSC. This optimised emulsion was selected for further skin absorption evaluation.