PubMed Health⌕ Search

Biomedical subjects

Harald Fuchs

Publications and source records attributed to Harald Fuchs.

At least 19 recordsLinked to original sources
PubMed2006

Single-atom contact mechanics: from atomic scale energy barrier to mechanical relaxation hysteresis.

The potential energy landscape of surfaces governs the dynamics of adsorbed molecules, as well as atomic scale friction processes. We measure the potential energy landscape of a single-atom tip interacting with a vicinal nonconducting NaCl(100) surface in real space using noncontact atomic force microscopy. We find that the shape of the potential energy profile is of sinusoidal form with a barrier height of 48 meV. Furthermore, we observe a discontinuity in the force curves at specific lattice sites, indicating the onset of reversible yet hysteretic mechanical relaxations.

Journal Article↗
PubMed2006

Interface interaction controlled transport of CdTe nanoparticles in the microcontact printing process.

High-quality CdTe nanoparticles stabilized with thioglycolic acid (TGA) are patterned on SiO2/Si surfaces using microcontact printing (microCP). Due to the weak interaction of the nanoparticles with the stamp surface, tailoring of gas flow rate during the inking process as well as the type and scale of the patterns on the stamp are used to control the distribution of the nanoparticles on the structured stamp surface. This distribution is then transferred the printed regions. Either edge printing or homogeneous printing can be achieved under optimized conditions. In addition, new structures such as nanowires form under certain conditions.

Journal Article↗
PubMed2006

Hierarchical luminescence patterning based on multiscaled self-assembly.

This communication describes a procedure for fabrication of hierarchical luminescence patterns based on the template-assisted assembly of CdSe nanocrystals on a self-assembled structure with green-emitting microstripes, as well as the photoinduced fluorescence enhancement of CdSe nanocrystals and photobleaching of dyes. The technique is low-cost and high-throughput and can be extended to many material combinations.

Journal Article↗
PubMed2006

Langmuir-Blodgett patterning of phospholipid microstripes: effect of the second component.

We systematically describe the striped pattern formation of the mixed monolayers of 1,2-di(2,4-octadecadienoyl)-sn-glycero-3-phosphocholine (DOEPC) and l-alpha-dipalmitoylphosphatidylcholine (DPPC) from the liquid expanded (LE) phase onto a mica surface by Langmuir-Blodgett (LB) transfer. The addition of the second component, DOEPC, strongly affects the formation of DPPC stripe patterns. When the molar ratio of DPPC and DOEPC is 1:0.1, the horizontal stripes dominate, while in the case of pure DPPC monolayer, there are three kinds of patterns: horizontal stripes, grids, and vertical stripes. The width and periodicity of stripes formed from the mixed monolayers are ca. 4-5 times smaller than those formed from pure DPPC patterns at the same transfer conditions, while the widths of channels are similar. A phase shift of substrate-mediated microphase separation in the two-component system during LB transfer is considered to be the mechanism for the influence of the second component on the formation of DPPC stripe patterns.

Journal Article↗
PubMed2006

Tetradecylferrocene: ordered molecular array of an organometallic amphiphile in the crystal and in a two-dimensional assembled structure on a surface.

Tetradecylferrocene (4, Fc-(CH2)13CH3) was synthesized via lithiation of ferrocene by treatment with tert-butyl lithium, followed by alkylation with 1-bromotetradecane. Complex 4 forms a physisorbed ordered molecular monolayer on the surface of highly oriented pyrolytic graphite (HOPG) that was analyzed by scanning tunneling microscopy (STM). It features a lamellar structure with single rows of ferrocenyl moieties separating connecting areas formed by the long alkyl chains which are arranged parallel to each other. The ordering principle of 4 on the surface can be related to the arrangement of Fc-(CH2)13CH3 molecules in the three-dimensional crystal lattice.

Journal Article↗
PubMed2006

Influence of an amide group in methyl octadecanoates on the monolayer stability.

The influence of a hydrogen bond donor and acceptor in the hydrophobic part of an amphiphile on the monolayer stability at the air/water interface is investigated. For that purpose, the amide group is integrated into the alkyl chain. Eight methyl octadecanoates have been synthesized with the amide group in two orientations and in different positions of the alkyl chain, namely, CH3O2C(CH2)m NHCO(CH2)n CH3 (n + m = 14): 1 (m = 1), 3 (m = 2), 5 (m = 3), 7 (m = 14); and CH3O2C(CH2)m CONH(CH2)n CH3: 2 (m = 1), 4 (m = 2), 6 (m = 3), 8 (m = 14). The monolayers have been characterized by their pi/A isotherms, their temperature dependence and Brewster angle microscopy (BAM). Amphiphile 1 with the amide group close to the ester group (m = 1) behaves like an unsubstituted fatty acid ester, while 3, 5, and 7, with the amide group in an intermediate and terminal position, exhibit a two-phase region. The amphiphiles 2, 4, 6, and 8, with a reversed orientation of the amide group, all exhibit a two-phase region with higher plateau pressures and lower collapse pressures than those of 1, 3, 5, and 7. For 7 and 8, domains of the liquid condensed (LC) phase are visualized by BAM in the two-phase region. The liquid expanded (LE)/LC-phase transitions are all exothermic with enthalpies deltaH ranging from -31 to -12 kJ/mol. Comparison with other bipolar amphiphiles indicates that the LC phase is better stabilized by the hydroxy and dihydroxy groups than by the amide group. For model compounds of 1-4, optimized conformers in the LE and LC phases have been determined by density functional theory (DFT) calculations.

Journal Article↗
PubMed2006

Synthesis and surface properties of new ureas and amides at different interfaces.

The influence of the urea and amide group in the alkyl chain of methyl nonadecanoate on the surface properties is investigated and compared. For that purpose, the ureas CH3O2C-(CH2)m-NHCONH-(CH2)n-CH3 (n + m = 14) [1 (m = 2), 3 (m = 3), and 5 (m = 4)] and the amides CH3O2C-(CH2)m-NHCO-(CH2)n-CH3 (n + m = 15) [2(m = 2), 4 (m = 3), and 6 (m = 4)] were synthesized. The pi/A isotherms of the ureas show up to the attainable temperature of 313 K no LE phase, which indicates a very stable LC phase. The amides exhibit a two phase plateau region, with the exception of 2. The different behavior is connected with the hydrogen bond energies, which are stronger with the ureas in the LC than in the LE phase, whereas those of the amides have a similar strength in both phases. The effect of hydrogen bonds in self-assembled molecules of N,N'-dialkylurea CH3-(CH2)m-NHCONH-(CH2)n-CH3 (m + n = 14) [7 (n = 2)] was visualized by STM at the octylbenzene/graphite interface. Compound 7 forms a lamella structure with a periodicity of one molecule length. The tilt angle of 86 degrees +/- 2 degrees to the edge of the lamella points to a nearly orthogonal arrangement of the molecules. It indicates two equivalent bonds between the aza-hydrogens and the carbonyl oxygen. A similar arrangement is proposed for the LC phase of the ureas at the air/water interface.

Amides↗
PubMed2006

Oligoethylene chains terminated by ferrocenyl end groups: synthesis, structural properties, and two-dimensional self-assembly on surfaces.

A series of unsaturated long-chain-bridged diferrocenes Fc-(CH2)n-CH=CH-(CH2)n-Fc (4 a-e) was synthesized by means of olefin metathesis. Subsequent catalytic hydrogenation furnished the saturated alpha,omega-bis-ferrrocenyl oligoethylene products Fc-(CH2)m-Fc (5). Members of both series formed highly ordered laminar structures at the highly oriented pyrolytic graphite (HOPG) solid/liquid interface or on the Ag(110) surface, which were characterized by STM. Details of the structural features of these ordered physisorbed surface assemblies of 4 and 5 were analyzed by comparison with DFT calculations on model systems and with the characteristic packing modes of these systems in the crystal.

Journal Article↗
PubMed2005

Unconventional air-stable interdigitated bilayer formed by 2,3-disubstituted fatty acid methyl esters.

A single-chain fatty acid methyl ester, racemic anti-3-fluoro-2-hydroxyeicosanoic acid methyl ester (beta-FHE), forms an unconventional air-stable interdigitated bilayer at the air-water interface. The interdigitated bilayer transferred onto solid substrate by the Langmuir-Blodgett (LB) technique keeps air-stable without any substrate modification or protein inclusion. There are two visible plateaus in the surface pressure-molecular area (pi-A) isotherms of beta-FHE Langmuir film during continuous compression. According to Brewster angle microscopy (BAM), grazing incidence X-ray diffraction (GIXD), X-ray reflectivity (XR), fluorescence microscopy (FM), and atomic force microscopy (AFM) measurements, the first plateau is attributed to the coexistence of liquid expanded (LE) and liquid condensed (LC) phases in the monolayer, while the second plateau is interpreted as the transition from LC monolayer to interdigitated bilayer. The coupling between tilt and curvature associated with the packing mismatch between headgroup and chain gives rise to buckling and folding of the monolayer, leading to the transition of the LC monolayer to a bilayer structure. The diffusion-limited aggregation (DLA) model is applied to describe the formation of the fractal structures of the bilayer as observed in the second plateau. In addition, the transition between monolayer and bilayer is reversible. The present works are interesting for understanding biological processes, for example, the behavior of lung surfactants.

Air↗
PubMed2005

Anisotropic aggregation and phase transition in Langmuir monolayers of methyl/ethyl esters of 2,3-dihydroxy fatty acids.

We studied interfacial properties of a series of methyl and ethyl esters of enantioenriched syn-2,3-dihydroxy fatty acids with different chain lengths at the air-water interface, using a Langmuir type film balance and a Brewster angle microscope (BAM). After analyzing their surface pressure (Pi)-area (A) isotherms, we inferred that these molecules existed as an E conformation in the liquid-expanded (LE) phase of monolayers, and the E conformation of molecules changed into a Z conformation during the LE-LC transition in a monolayer. BAM images evidenced the formation of elongated LC aggregates. This is possibly induced by the intermolecular hydrogen bonds, leading to the anisotropic growth of LC domains, on the basis of the FT-IR spectroscopy data. The enthalpy change of the LE-LC phase transition is considered to result from the three types of intermolecular interactions at the air-water interface during compression of these amphiphiles. These findings are discussed in terms of various physical factors that influenced intermolecular interactions and macroscopic aggregations of these amphiphiles.

Journal Article↗
PubMed2005

Phase behavior of 2,3-disubstituted methyl octadecanoate monolayers at the air-water interface.

The phase behavior of 2,3-disubstituted methyl octadecanoate monolayers at the air-water interface is studied by film balance and a Brewster angle microscope (BAM). The comparison of the surface pressure-molecular area (pi-A) isotherms with the corresponding BAM images provides information on the phase behavior of the monolayers. Variations in the phase behavior of different 2,3-disubstituted methyl octadecanoate monolayers can be correlated with the size of the headgroups, the interactions between the polar molecular moieties and the subphase, and the intermolecular interactions. The enlarging of the headgroups makes forming a condensed monolayer difficult for the molecules, even after introduction of substituents giving rise to the formation of hydrogen bonds between the molecules, which may balance the steric repulsion and stabilize the monolayers. Model calculations of the two-dimensional lattice structure of the 2,3-disubstituted methyl octadecanoates on basis of the pg and p1 space group are performed and correspond well with the experimental results.

Air↗
PubMed2005

Simple and complex lattices of N-alkyl fatty acid amides on a highly oriented pyrolytic graphite surface.

STM investigations of three N-alkyl fatty acid amide molecules have been carried out to get information of their molecular arrangement on a highly oriented pyrolytic graphite surface. With variable positions of amide along the alkyl chain, complex lattices with different lattice constants were observed. Besides the lattices with a repeat unit matching one or two molecular lengths, a lattice with a repeat unit corresponding to three molecular lengths was found. In addition, the portion of different lattices depends on the length of the shorter alkyl chain. DFT-D calculations point to interactions of antiparallel oriented dipoles due to the amide group, which are distance dependent and thus larger for shorter N-alkyl chains.

Journal Article↗
PubMed2005

Gold DNA-conjugates: ion specific self-assembly of gold nanoparticles via the dG-quartet.

The Oxytricha telomere DNA hairpin 5'-d(G4T4G4) immobilized on 13 nm gold nanoparticles forms a supramolecular assembly via dGC-quartets, as determined by the color change and by SEM. The aggregation is ion-dependent and selective for sodium ions. K+ is less efficient while Li+ and Cs+ do not drive the aggregation. This work is the first effort exploring the use of secondary structures of DNA (quadruplexes) for producing self-assemblies of gold nanoparticles.

Base Sequence↗