Spatial frequency content in optical mapping of cardiac cell monolayers.
Explore the source record for details and available documents.
Action Potentials↗
Biomedical subjects
Harold Bien
Publications and source records attributed to Harold Bien.
Calcium instabilities in mammalian cardiomyocyte networks.
The degeneration of a regular heart rhythm into fibrillation (a chaotic or chaos-like sequence) can proceed via several classical routes described by nonlinear dynamics: period-doubling, quasiperiodicity, or intermittency. In this study, we experimentally examine one aspect of cardiac excitation dynamics, the long-term evolution of intracellular calcium signals in cultured cardiomyocyte networks subjected to increasingly faster pacing rates via field stimulation. In this spatially extended system, we observed alternans and higher-order periodicities, extra beats, and skipped beats or blocks. Calcium instabilities evolved nonmonotonically with the prevalence of phase-locking or Wenckebach rhythm, low-frequency magnitude modulations (signature of quasiperiodicity), and switches between patterns with occasional bursts (signature of intermittency), but period-doubling bifurcations were rare. Six ventricular-fibrillation-resembling episodes were pace-induced, for which significantly higher complexity was confirmed by approximate entropy calculations. The progressive destabilization of the heart rhythm by coexistent frequencies, seen in this study, can be related to theoretically predicted competition of control variables (voltage and calcium) at the single-cell level, or to competition of excitation and recovery at the cell network level. Optical maps of the response revealed multiple local spatiotemporal patterns, and the emergence of longer-period global rhythms as a result of wavebreak-induced reentries.
Action Potentials↗
Macroscopic optical mapping of excitation in cardiac cell networks with ultra-high spatiotemporal resolution.
Optical mapping of cardiac excitation using voltage- and calcium-sensitive dyes has allowed a unique view into excitation wave dynamics, and facilitated scientific discovery in the cardiovascular field. At the same time, the structural complexity of the native heart has prompted the design of simplified experimental models of cardiac tissue using cultured cell networks. Such reduced experimental models form a natural bridge between single cells and tissue/organ level experimental systems to validate and advance theoretical concepts of cardiac propagation and arrhythmias. Macroscopic mapping (over >1cm(2) areas) of transmembrane potentials and intracellular calcium in these cultured cardiomyocyte networks is a relatively new development and lags behind whole heart imaging due to technical challenges. In this paper, we review the state-of-the-art technology in the field, examine specific aspects of such measurements and outline a rational system design approach. Particular attention is given to recent developments of sensitive detectors allowing mapping with ultra-high spatiotemporal resolution (>5 megapixels/s). Their interfacing with computer platforms to match the high data throughput, unique for this new generation of detectors, is discussed here. This critical review is intended to guide basic science researchers in assembling optical mapping systems for optimized macroscopic imaging with high resolution in a cultured cell setting. The tools and analysis are not limited to cardiac preparations, but are applicable for dynamic fluorescence imaging in networks of any excitable media.
Action Potentials↗
Electrospun fine-textured scaffolds for heart tissue constructs.
The structural and functional effects of fine-textured matrices with sub-micron features on the growth of cardiac myocytes were examined. Electrospinning was used to fabricate biodegradable non-woven poly(lactide)- and poly(glycolide)-based (PLGA) scaffolds for cardiac tissue engineering applications. Post-processing was applied to achieve macro-scale fiber orientation (anisotropy). In vitro studies confirmed a dose-response effect of the poly(glycolide) concentration on the degradation rate and the pH value changes. Different formulations were examined to assess scaffold effects on cell attachment, structure and function. Primary cardiomyocytes (CMs) were cultured on the electrospun scaffolds to form tissue-like constructs. Scanning electron microscopy (SEM) revealed that the fine fiber architecture of the non-woven matrix allowed the cardiomyocytes to make extensive use of provided external cues for isotropic or anisotropic growth, and to some extent to crawl inside and pull on fibers. Structural analysis by confocal microscopy indicated that cardiomyocytes had a preference for relatively hydrophobic surfaces. CMs on electrospun poly(L-lactide) (PLLA) scaffolds developed mature contractile machinery (sarcomeres). Functionality (excitability) of the engineered constructs was confirmed by optical imaging of electrical activity using voltage-sensitive dyes. We conclude that engineered cardiac tissue structure and function can be modulated by the chemistry and geometry of the provided nano- and micro-textured surfaces. Electrospinning is a versatile manufacturing technique for design of biomaterials with potentially reorganizable architecture for cell and tissue growth.
Absorbable Implants↗
Acoustic micromachining of three-dimensional surfaces for biological applications.
We present the use of an accessible micromachining technique (acoustic micromachining) for manufacturing micron-feature surfaces with non-discretely varying depth. Acoustic micromachining allows for non-photolithographic production of metal templates with programmable spatial patterns and involves the use of standard acoustic, cutting and electroplating equipment for mass production of vinyl records. Simple 3D patterns were transferred from an acoustic signal into working nickel templates, from which elastic polymer molds were obtained, featuring deep surface grooves and non-discrete (smooth) variations in the z-dimension. Versatility and applicability of the method is demonstrated in obtaining microfluidics structures, manufacturing high-surface area wavy polymer fibers, assembly of cell networks on scaffolds with 3D topography, and microcontact printing of proteins and cells.
Acoustics↗
Scaffold topography alters intracellular calcium dynamics in cultured cardiomyocyte networks.
Structural and functional changes ensue in cardiac cell networks when cells are guided by three-dimensional scaffold topography. We report enhanced synchronous pacemaking activity in association with slow diastolic rise in intracellular Ca2+ concentration ([Ca2+]i) in cell networks grown on microgrooved scaffolds. Topography-driven changes in cardiac electromechanics were characterized by the frequency dependence of [Ca2+]i in syncytial structures formed of ventricular myocytes cultured on microgrooved elastic scaffolds (G). Cells were electrically paced at 0.5-5 Hz, and [Ca2+]i was determined using microscale ratiometric (fura 2) fluorescence. Compared with flat (F) controls, the G networks exhibited elevated diastolic [Ca2+]i at higher frequencies, increased systolic [Ca2+]i across the entire frequency range, and steeper restitution of Ca2+ transient half-width (n = 15 and 7 for G and F, respectively, P < 0.02). Significant differences in the frequency response of force-related parameters were also found, e.g., overall larger total area under the Ca2+ transients and faster adaptation of relaxation time to pacing rate (P < 0.02). Altered [Ca2+]i dynamics were paralleled by higher occurrence of spontaneous Ca2+ release and increased sarcoplasmic reticulum load (P < 0.02), indirectly assessed by caffeine-triggered release. Electromechanical instabilities, i.e., Ca2+ and voltage alternans, were more often observed in G samples. Taken together, these findings 1) represent some of the first functional electromechanical data for this in vitro system and 2) demonstrate direct influence of the microstructure on cardiac function and susceptibility to arrhythmias via Ca(2+)-dependent mechanisms. Overall, our results substantiate the idea of guiding cellular phenotype by cellular microenvironment, e.g., scaffold design in the context of tissue engineering.
Animals↗
Functional cardiac cell constructs on cellulose-based scaffolding.
Cellulose and its derivatives have been successfully employed as biomaterials in various applications, including dialysis membranes, diffusion-limiting membranes in biosensors, in vitro hollow fibers perfusion systems, surfaces for cell expansion, etc. In this study, we tested the potential of cellulose acetate (CA) and regenerated cellulose (RC) scaffolds for growing functional cardiac cell constructs in culture. Specifically, we demonstrate that CA and RC surfaces are promoting cardiac cell growth, enhancing cell connectivity (gap junctions) and electrical functionality. Being optically clear and essentially non-autofluorescent, CA scaffolds did not interfere with functional optical measurements in the cell constructs. Molding to follow fine details or complex three-dimensional shapes are additional important characteristics for scaffold design in tissue engineering. Biodegradability can be controlled by hydrolysis, de-acetylization of CA and cytocompatible enzyme (cellulase) action, with glucose as a final product. Culturing of cardiac cells and growth of tissue-like cardiac constructs in vitro could benefit from the versatility and accessibility of cellulose scaffolds, combining good adhesion (comparable to the standard tissue-culture treated polystyrene), molding capabilities down to the nanoscale (comparable to the current favorite in soft lithography-polydimethylsiloxane) with controlled biodegradability.
Action Potentials↗
Extra-lymphatic solid tumor growth is not immunologically ignored and results in early induction of antigen-specific T-cell anergy: dominant role of cross-tolerance to tumor antigens.
A better understanding of how solid malignancies arise in an immunocompetent host, avoid immune recognition, and ultimately progress to widely disseminated cancer is essential to effectively harness the immune system against solid tumors. Because of their extra-lymphatic localization, it has been proposed that solid malignancies are just ignored by the immune system, thereby allowing their uncontrolled growth and dissemination. Alternatively, as most of the solid tumors are unable to express costimulatory molecules, the "signal one without signal two" model of tolerance induction has been frequently evoked to account for the failure of the immune system to reject antigenic tumors in vivo. In this study, we showed, however, that the extra-lymphatic growth of solid tumors is not immunologically ignored by the lymphoid compartment, resulting instead in the early induction of antigen-specific CD4(+) T-cell tolerance. Furthermore, analysis of parent-into-F1 bone marrow (BM) chimeras demonstrates that presentation of tumor antigens by BM-derived antigen-presenting cells represents the dominant mechanism in solid tumor-induced CD4(+) T-cell tolerance. Our findings of early development of antigen-specific T-cell unresponsiveness mediated by BM-derived antigen-presenting cells, not only provides a plausible explanation for the failure of the immune system to reject antigenic solid tumors in vivo, but more importantly, they have identified a barrier that, if appropriately manipulated, may lead to approaches to effectively harness the immune system against solid malignancies.
Animals↗
Cardiac cell networks on elastic microgrooved scaffolds.
Explore the source record for details and available documents.
Actins↗