PubMed Health⌕ Search

Biomedical subjects

Harold Kohn

Publications and source records attributed to Harold Kohn.

30 records · Page 2Linked to original sources
PubMed2003

ATP binding to Rho transcription termination factor. Mutant F355W ATP-induced fluorescence quenching reveals dynamic ATP binding.

Rho transcription termination factor mutant, F355W, showed tryptophan fluorescence intensity approximately twice that of wild-type Rho at equivalent protein concentrations and underwent a decrease in relative fluorescence intensity at 350 nm when 100 microm ATP was added in the presence or absence of RNA. Titration of this fluorescence quenching with varying concentrations of ATP (0-600 microm), where Rho is shown to exist as a hexamer (400 nm Rho), revealed tight and loose ATP-binding sites. Bicyclomycin, a specific inhibitor of Rho, increased the tight ATP binding and was used to calibrate ATP-induced fluorescence quenching by using [gamma-(32)P]ATP filter binding. For the Rho mutant F355W, three tight (K(d)(1) = 3 +/- 0.3 microm) and three loose (K(d)(2) = 58 +/- 3 microm) ATP-binding sites per hexamer were seen on Scatchard analysis in the absence of bicyclomycin and poly(C). In the presence of bicyclomycin, the K(d)(1) changed from 3.0 to 1.4 microm, but K(d)(2) underwent a lesser change. The non-hydrolyzable ATP analogue, gamma-S-ATP, gave a similar profile with three tight (K(d)(1) = 0.2 microm) and three loose (K(d)(2) = 70 microm) ATP-binding sites per hexamer. Adding poly(C) to F355W did not alter the K(d)(1) or K(d)(2) for ATP or for gamma-S-ATP. ADP-induced quenching produced 5.5 loose (K(d) = 92 microm) binding sites in the absence of poly(C), and the binding became weaker (K(d) = 175 microm) in the presence of poly(C). The data suggest that in the presence of ADP Rho has six equivalent nucleotide-binding sites. When ATP was added these sites converted to three tight and three loose binding loci. We propose an alternating ATP site mechanism where ATP binding creates heterogeneity in the ATP binding in adjacent subunits, and we suggest that ATP binding to a neighboring loose site stimulates hydrolysis at a neighboring tight binding site such that all six subunits can be potential "active" sites for ATP hydrolysis. The dynamic nature of the ATP binding to Rho is discussed in the terms of the mechanism of RNA tracking driven by ATP hydrolysis.

Adenosine Diphosphate↗
PubMed2003

N(2)-substituted D,L-cycloserine derivatives: synthesis and evaluation as alanine racemase inhibitors.

A select series of N(2)-substituted D,L-cycloserine derivatives were prepared a ndevaluated for inhibitory activity against purified alanine racemases (alr gene product) from Escherichia coli, Staphylococcus aureus, and Mycobacterium tuberculosis, as well as in a growth inhibition assay. N(2)-Modification led to loss of enzymatic inhibitory activity in most cases consistent with a recent proposal for cycloserine function.

Alanine Racemase↗
PubMed2002

The Mg2+ requirements for rho transcription termination factor: catalysis and bicyclomycin inhibition.

Kinetic studies document that the essential Escherichia coli transcription termination factor rho utilizes Mg(2+) and ATP as a substrate and requires a second Mg(2+) ion for maximum poly(C)-dependent ATP hydrolysis activity. The velocity curves show a classic nonessential Mg(2+) activation pattern in which Mg(2+) augments hydrolysis by 39% and gives a K(1)' for MgATP of 9.5 microM in the presence of excess Mg(2+) and a K(1) for MgATP of 21.2 microM under limiting Mg(2+) concentrations. Bicyclomycin (1), a commercial antibiotic that inhibits rho, weakened Mg(2+) binding at the nonessential site and disrupted the nonessential Mg(2+) activation pathway for poly(C)-dependent ATP hydrolysis. The K(i) values for 1 were 23 microM and 35 microM under excess and limiting Mg(2+) conditions, respectively, while the K(Mg(app)) for nonessential Mg(2+) increased with increasing 1 concentrations. These findings, when combined with reported mechanistic studies, provide an emerging picture of key catalytic and substrate binding sites that are necessary for rho function and that are proximal to the 1 binding site.

Adenosine Triphosphatases↗
PubMed2002

Design and evaluation of affinity labels of functionalized amino acid anticonvulsants.

Studies have shown that functionalized amino acids (FAA) exhibit outstanding activity in the maximal electroshock-induced seizure (MES) test in rodents. Affinity labels patterned in part after the potent antiepileptic (R)-N-benzyl-2-acetamido-3-methoxypropionamide ((R)-2) have been prepared as mechanistic probes to learn the pharmacological basis for FAA function. The chemical reactivity of the affinity labels with nucleophiles was assessed, and the labels were evaluated in in vitro radioligand assays and in the MES tests in rodents. The affinity labels did not bind to receptors known to effect seizure spread. Three affinity labels, (R,S)-N-benzyl-2-acetamido-6-isothiocyanatohexanamide ((R,S)-5), (R)-N-(4-isothiocyanatobenzyl)-2-acetamido-3-methoxypropionamide ((R)-6), and (R)-N-(3-isothiocyanatobenzyl)-2-acetamido-3-methoxypropionamide ((R)-7), possessed excellent in vivo anticonvulsant activity and exhibited maximal activity at later time periods than typically observed for FAA. The anticonvulsant activity of 6 and 7 resided primarily in the (R)-enantiomer and the activity of (R)-6 and (R)-7 in rats (po) exceeded that of phenytoin. The chemical properties, pharmacological profile, and marked stereospecificity associated with 6 and 7 anticonvulsant activity make these compounds useful pharmacological tools for the study of the mode of action of FAA.

Affinity Labels↗
PubMed2002

Quantitative structure-activity relationship analysis of functionalized amino acid anticonvulsant agents using k nearest neighbor and simulated annealing PLS methods.

We report the development of rigorously validated quantitative structure-activity relationship (QSAR) models for 48 chemically diverse functionalized amino acids with anticonvulsant activity. Two variable selection approaches, simulated annealing partial least squares (SA-PLS) and k nearest neighbor (kNN), were employed. Both methods utilize multiple descriptors such as molecular connectivity indices or atom pair descriptors, which are derived from two-dimensional molecular topology. QSAR models with high internal accuracy were generated, with leave-one-out cross-validated R(2) (q(2)) values ranging between 0.6 and 0.8. The q(2) values for the actual dataset were significantly higher than those obtained for the same dataset with randomly shuffled activity values, indicating that models were statistically significant. The original dataset was further divided into several training and test sets, with highly predictive models providing q(2) values greater than 0.5 for the training sets and R(2) values greater than 0.6 for the test sets. These models were capable of predicting with reasonable accuracy the activity of 13 novel compounds not included in the original dataset. The successful development of highly predictive QSAR models affords further design and discovery of novel anticonvulsant agents.

Amino Acids↗
PubMed2002

Mutations in the rho transcription termination factor that affect RNA tracking.

Model studies have identified 16 conserved positively charged amino acids that form a positive strip pointing toward the center hole of Rho. Fourteen residues were individually changed to either an alanine or a glycine and one to a glutamate. Residues Arg(269), Arg(272), Lys(283), Arg(296), Lys(298), and Arg(299) form a subdomain (locus) located N-terminal to (above) the ATP hydrolysis domain (P-loop) and mutations in these residues led to either inactive Rho or to proteins displaying decreased k(cat) for poly(C)-dependent ATP hydrolysis, increased K(m) for ribo(C)(10) activation, and decreased transcription termination efficiencies (57-77%) compared with wild-type Rho. Residues Arg(347), Lys(348), Lys(352), and Arg(353) form a subdomain (locus) C-terminal to (below) the ATP hydrolysis domain, and mutations in these residues also show a decreased k(cat) for poly(C)-dependent ATP hydrolysis, an increased K(m) for ribo(C)(10) activation, and a 50-70% decrease in transcription termination, compared with wild-type Rho. Residues Arg(212) and Lys(336) surround the ATP hydrolysis domain, and mutations in these residues also altered the kinetic properties of Rho. We conclude that the secondary RNA-tracking site consists of amino acids whose putative orientation faces the central hole in Rho and in part reside in two clusters of positively charged residues located above and below the ATP hydrolysis domain.

Adenosine Triphosphate↗
PubMed2002

7-N-(mercaptoalkyl)mitomycins: implications of cyclization for drug function.

The Kyowa Hakko Kogyo and Bristol-Myers Squibb companies reported that select mitomycin C(7) aminoethylene disulfides displayed improved pharmacological profiles compared with mitomycin C (1). Mechanisms have been advanced for these mitomycins that differ from 1. Central to many of these hypotheses is the intermediate generation of 7-N-(2-mercaptoethyl)mitomycin C (5). Thiol 5 has been neither isolated nor characterized. Two efficient methods were developed for mitomycin (porfiromycin) C(7)-substituted thiols. In the first method, the thiol was produced by a thiol-mediated disulfide exchange process using an activated mixed mitomycin disulfide. In the second route, the thiol was generated by base-mediated cleavage of a porfiromycin C(7)-substituted thiol ester. We selected four thiols, 7-N-(2-mercaptoethyl)mitomycin C (5), 7-N-(2-mercaptoethyl)porfiromycin (12), 7-N-(2-mercapto-2-methylpropyl)mitomycin C (13), and 7-N-(3-mercaptopropyl)porfiromycin (14), for study. Thiols 5 and 12-14 differed in the composition of the alkyl linker that bridged the thiol with the mitomycin (porfiromycin) C(7) amino substituent. Thiol generation was documented by HPLC and spectroscopic studies and by thiol-trapping experiments. The linker affected the structure of the thiol species and the stability of the thiol. We observed that thiols 5 and 12 existed largely as their cyclic isomers. Evidence is presented that cyclization predominantly occurred at the mitomycin C(7) position. Correspondingly, alkyl linker substitution (13) or extension of the linker to three carbons (14) led to enhanced thiol stability and the predominant formation of the free thiol species. The dominant reaction of thiols 5 and 12-14 or their isomers was dimerization, and we found no evidence that thiol formation led to mitosene production and aziridine ring-opening. These findings indicated that thiol generation was not sufficient for mitomycin ring activation. The potential pharmacological advantages of mitomycin C(7) aminoethylene disulfides compared with 1 is discussed in light of the observed thiol cyclization pathway.

Animals↗
PubMed1996

Role of the C(1) Triol Group in Bicyclomycin: Synthesis and Biochemical and Biological Properties.

Bicyclomycin (1) is a commercial antibiotic whose primary site of action in Escherichia coli is the essential cellular protein transcription termination factor rho. The bicyclomycin binding domain in rho is unknown; however, enzyme irreversible inactivators that modify rho upon activation may identify the site. In this study, we investigated the importance for rho binding of the C(1) triol group in 1. Twelve bicyclomycin derivatives were prepared, and the C(1) triol group was modified at the C(1'), the C(2'), and the C(3') sites. The compounds were evaluated by rho-dependent ATPase and transcription termination assays and their antimicrobial activities assessed using a filter disc assay. Bicyclomycin inhibited both rho-dependent ATPase (I(50) = 60 &mgr;M) and rho-dependent transcription termination (I(50) approximately 5 &mgr;M) processes and had a minimum inhibitory concentration value of 0.25 mg/mL against E. coli W3350 cells. None of the 12 C(1) triol bicyclomycin derivatives significantly inhibited rho-dependent ATPase (I(50) > 400 &mgr;M) and transcription termination (I(50) > 100 &mgr;M) activities or exhibited antibiotic activity at a 32 mg/mL concentration. These results indicated that there was a strong molecular complement between the C(1) triol group and its rho binding site. We concluded that the C(1) triol group in 1 is a critical structural element necessary for drug binding to rho and that an enzyme irreversible inactivating unit placed at this site would prohibit the bicyclomycin derivative from efficiently binding to rho.

Journal Article↗
PubMed1996

Role of the [4.2.2] Bicyclic Unit in Bicyclomycin: Synthesis, Structure, Chemical, Biochemical, and Biological Properties.

Twelve bicyclomycin derivatives were synthesized to determine the effect of modification of the [4.2.2] bicyclic unit in bicyclomycin (1) on drug function. Few bicyclomycin derivatives have been described in which the [4.2.2] ring system has been modified. The compounds evaluated were divided into two categories: the two N-methyl-modified bicyclomycins (2, 3) and the ten C(6)-substituted bicyclomycins (4-13). Substituents introduced at the C(6) site included alkoxy, thioalkoxy, thiophenoxy, anilino, and hydrogen. A procedure was developed to synthesize select C(6)-substituted bicyclomycins. Bicyclomycin was first converted to bicyclomycin C(2'),C(3')-acetonide (16) and then treated with methanesulfonyl chloride to give in situ the corresponding C(6) mesylate 17. Treatment of 17 with the appropriate nucleophile followed by removal of the C(2'),C(3')-acetonide group gave the desired C(6)-substituted bicyclomycin. The chemical properties of C(6) O-methylbicyclomycin (4) were examined. Treatment of THF-H(2)O mixtures of 4 with excess EtSH maintained at "pH" 8.0-9.0 led to no detectable reaction, while at more basic "pH" values 4 underwent stereospecific conversion to the bis-spiro derivative 33 and no appreciable EtSH addition to the C(5)-C(5a) exomethylene unit. These results were compared to the reactivity of 1 with EtSH. The stability (pH 7.4, 37 degrees C) of C(6)-substituted bicyclomycins 4, 6, and 10-13 in aqueous solutions were examined. We observed that most of these compounds (4, 6, 10-12) underwent near complete change (>75%) within 200 h. The [4.2.2] bicyclic-modified bicyclomycins were evaluated in the rho-dependent ATPase assay and their antimicrobial activities determined using a filter disc assay. Most of the compounds were also tested in the transcription termination assay. We observed that all structural modifications conducted within the [4.2.2] bicyclic unit led to a loss of rho-dependent ATPase (I(50) > 400 &mgr;M) and to transcription termination (I(50) > 100 &mgr;M) inhibitory activities, as well as a loss of antimicrobial activity (MIC > 32 mg/mL). Only N(10)-methylbicyclomycin (2) displayed moderate inhibitory activities in these assays. These findings indicated that the [4.2.2] bicyclic unit played an important role in the antibiotic-rho recognition process. Potential factors that govern this interaction are briefly discussed. We concluded that placement of an irreversible inactivating unit at the N- and O-sites within the [4.2.2] bicyclic unit in 1 would likely prohibit the bicyclomycin derivative from efficiently binding to rho.

Journal Article↗
PubMed1996

Role of the C(5)-C(5a) Exomethylene Group in Bicyclomycin: Synthesis, Structure, and Biochemical and Biological Properties.

Thirty-two C(5)-C(5a) exomethylene-modified bicyclomycin derivatives were prepared to determine the effect of structural modification of this unit on bicyclomycin (1) function. The compounds were grouped into three categories: the C(5)-unsaturated bicyclomycins, the C(5a)-substituted C(5)-C(5a)-dihydrobicyclomycin derivatives, and the C(5)-modified norbicyclomycins. An efficient three-step procedure was developed to synthesize C(5a)-substituted C(5),C(5a)-dihydrobicyclomycins. Bicyclomycin was converted to bicyclomycin C(2'),C(3')-acetonide (36) and then treated with a nucleophile in 50% aqueous methanol ("pH" 10.5) to give the C(5a)-substituted C(5),C(5a)-dihydrobicyclomycin C(2'),C(3')-acetonide. Removal of the acetonide group (trifluoroacetic acid in 50% aqueous methanol) in the final step provided the desired bicyclomycin derivative. All the compounds were evaluated using the rho-dependent ATPase assay and their antimicrobial activities determined using a filter disc assay. Most of the compounds were also tested in the transcription termination assay. We observed that many of the C(5)-unsaturated bicyclomycins effectively inhibited ATP hydrolysis at 400 &mgr;M and inhibited the production of rho-dependent transcripts at 100 &mgr;M. The biochemical activities of C(5a)-bicyclomycincarboxylic acid (5), methyl C(5a)-bicyclomycincarboxylate (6), ethyl C(5a)-bicyclomycincarboxylate (7), and bicyclomycin C(5)-norketone O-methyloxime (11) were all similar to 1. Compounds 6, 7, and 11 exhibited diminished antibiotic activity compared to 1, and 5 displayed no detectable activity. Several C(5a)-substituted C(5),C(5a)-dihydrobicyclomycins showed significant inhibition of rho-dependent ATPase and transcription termination activities. The inhibitory properties of C(5),C(5a)-dihydrobicyclomycin C(5a)-methyl sulfide (18), C(5),C(5a)-dihydrobicyclomycin C(5a)-phenyl sulfide (23), and C(5)-C(5a)-dihydrobicyclomycin-5,5a-diol (31) approached those of 1. Compounds 18, 23, and 31 did not exhibit antibiotic activity. Two of the four C(5)-modified norbicyclomycin adducts showed moderate inhibitory activities in the ATPase assay, and none showed significant antibiotic activity. Our findings showed that the C(5)-C(5a) exomethylene unit retention in 1 was not essential for inhibition of in vitro rho activity. The structure-activity relationship data indicated that bicyclomycins that contained a small unsaturated C(5) unit or C(5),C(5a)-dihydrobicyclomycins that possessed a small, nonpolar C(5a) substituent effectively inhibited rho function in in vitro biochemical assays. We concluded that the C(5)-C(5a) unit in 1 was not a critical structural element necessary for drug binding to rho and that irreversible, inactivating units placed at this site would permit the bicyclomycin derivative to bind efficiently to rho.

Journal Article↗
PubMedDate not supplied

A novel automated lazy learning QSAR (ALL-QSAR) approach: method development, applications, and virtual screening of chemical databases using validated ALL-QSAR models.

A novel automated lazy learning quantitative structure-activity relationship (ALL-QSAR) modeling approach has been developed on the basis of the lazy learning theory. The activity of a test compound is predicted from a locally weighted linear regression model using chemical descriptors and the biological activity of the training set compounds most chemically similar to this test compound. The weights with which training set compounds are included in the regression depend on the similarity of those compounds to a test compound. We have applied the ALL-QSAR method to several experimental chemical data sets including 48 anticonvulsant agents with known ED50 values, 48 dopamine D1-receptor antagonists with known competitive binding affinities (Ki), and a Tetrahymena pyriformis data set containing 250 phenolic compounds with toxicity IGC50 values. When applied to database screening, models developed for anticonvulsant agents identified several known anticonvulsant compounds that were not only absent in the training set but highly chemically dissimilar to the training set compounds. This initial success indicates that ALL-QSAR can be further exploited as a general tool for accurate bioactivity prediction and database screening in drug design and discovery. Because of its local nature, the ALL-QSAR approach appears to be especially well-suited for the development of highly predictive models for the sparse or unevenly distributed data sets.

Database Management Systems↗