PubMed Health⌕ Search

Biomedical subjects

Hedi Mattoussi

Publications and source records attributed to Hedi Mattoussi.

At least 19 recordsLinked to original sources
PubMed2006

Solution-phase single quantum dot fluorescence resonance energy transfer.

We present a single particle fluorescence resonance energy transfer (spFRET) study of freely diffusing self-assembled quantum dot (QD) bioconjugate sensors, composed of CdSe-ZnS core-shell QD donors surrounded by dye-labeled protein acceptors. We first show that there is direct correlation between single particle and ensemble FRET measurements in terms of derived FRET efficiencies and donor-acceptor separation distances. We also find that, in addition to increased sensitivity, spFRET provides information about FRET efficiency distributions which can be used to resolve distinct sensor subpopulations. We use this capacity to gain information about the distribution in the valence of self-assembled QD-protein conjugates and show that this distribution follows Poisson statistics. We then apply spFRET to characterize heterogeneity in single sensor interactions with the substrate/target and show that such heterogeneity varies with the target concentration. The binding constant derived from spFRET is consistent with ensemble measurements.

Cadmium Compounds↗
PubMed2006

Quantum dot/peptide-MHC biosensors reveal strong CD8-dependent cooperation between self and viral antigens that augment the T cell response.

Cytotoxic T lymphocytes (CTL) can respond to a few viral peptide-MHC-I (pMHC-I) complexes among a myriad of virus-unrelated endogenous self pMHC-I complexes displayed on virus-infected cells. To elucidate the molecular recognition events on live CTL, we have utilized a self-assembled biosensor composed of semiconductor nanocrystals, quantum dots, carrying a controlled number of virus-derived (cognate) and other (noncognate) pMHC-I complexes and examined their recognition by antigen-specific T cell receptor (TCR) on anti-virus CD8(+) T cells. The unique architecture of nanoscale quantum dot/pMHC-I conjugates revealed that unexpectedly strong multivalent CD8-MHC-I interactions underlie the cooperative contribution of noncognate pMHC-I to the recognition of cognate pMHC-I by TCR to augment T cell responses. The cooperative, CD8-dependent spread of signal from a few productively engaged TCR to many other TCR can explain the remarkable ability of CTL to respond to virus-infected cells that present few cognate pMHC-I complexes.

Antigens, Viral↗
PubMed2006

Hydrodynamic dimensions, electrophoretic mobility, and stability of hydrophilic quantum dots.

Luminescent semiconductor quantum dots (QDs) have great potential for use in biological assays and imaging. These nanocrystals are capped with surface ligands (bifunctional molecules, amphiphilic polymers, phospholipids, etc.) that render them hydrophilic and provide them with functional properties. These coatings alters their hydrodynamic radii and surface charge, which can drastically affect properties such as diffusion within the cell cytoplasm. Heavy atom techniques such as transmission electron microscopy and X-ray scattering probe the inorganic core and do not take into account the ligand coating. Herein we use dynamic light scattering to characterize the hydrodynamic radius (R(H)) of CdSe-ZnS QDs capped with various hydrophilic surface coatings (including dihydrolipoic acid and amphiphilic polymers) and self-assembled QD-protein bioconjugates. Experiments were complemented with measurements of the geometric size and zeta potential using agarose gel electrophoresis and laser Doppler velocimetry. We find that the effects of surface ligands on the hydrodynamic radius and on the nanoparticle mobility are complex and strongly depend on a combination of the inorganic core size and nature and lateral extension of the hydrophilic surface coating. These properties are critical for the design of QD-based biosensing assays as well as QD bioconjugate diffusion in live cells.

Biosensing Techniques↗
PubMed2006

Proteolytic activity monitored by fluorescence resonance energy transfer through quantum-dot-peptide conjugates.

Proteases are enzymes that catalyse the breaking of specific peptide bonds in proteins and polypeptides. They are heavily involved in many normal biological processes as well as in diseases, including cancer, stroke and infection. In fact, proteolytic activity is sometimes used as a marker for some cancer types. Here we present luminescent quantum dot (QD) bioconjugates designed to detect proteolytic activity by fluorescence resonance energy transfer. To achieve this, we developed a modular peptide structure which allowed us to attach dye-labelled substrates for the proteases caspase-1, thrombin, collagenase and chymotrypsin to the QD surface. The fluorescence resonance energy transfer efficiency within these nanoassemblies is easily controlled, and proteolytic assays were carried out under both excess enzyme and excess substrate conditions. These assays provide quantitative data including enzymatic velocity, Michaelis-Menten kinetic parameters, and mechanisms of enzymatic inhibition. We also screened a number of inhibitory compounds against the QD-thrombin conjugate. This technology is not limited to sensing proteases, but may be amenable to monitoring other enzymatic modifications.

Amino Acid Sequence↗
PubMed2006

Designer variable repeat length polypeptides as scaffolds for surface immobilization of quantum dots.

We demonstrate the use of a series of engineered, variable-length de novo polypeptides to discretely immobilize luminescent semiconductor nanocrystals or quantum dots (QDs) onto functional surfaces. The polypeptides express N-terminal dicysteine and C-terminal hexahistidine residues that flank a variable number (1, 3, 5, 7, 14, 21, 28, or 35) of core beta-strand repeats, with tyrosine, glutamic acid, histidine, and lysine residues located at the turns. Polypeptides have molecular weights ranging from 4 to 83 kDa and retain a rigid structure based on the antiparallel beta-sheet motif. We first use a series of dye-labeled polypeptides to test and characterize their self-assembly onto hydrophilic CdSe-ZnS QDs using fluorescence resonance energy transfer (FRET). Results indicate that peptides maintain their beta-sheet conformation after self-assembly onto the QD surfaces, regardless of their length. We then immobilize biotinylated derivatives of these polypeptides on a NeutrAvidin-functionalized substrate and use them to capture QDs via specific interactions between the peptides' polyhistidine residues and the nanocrystal surface. We found that each of the polypeptides was able to efficiently capture QDs, with a clear correlation between the density of the surface-tethered peptide and the capacity for nanocrystal capture. The versatility of this capture strategy is highlighted by the creation of a variety of one- and two-dimensional polypeptide-QD structures as well as a self-assembled surface-immobilized FRET-based nutrient sensor.

Amino Acid Sequence↗
PubMed2006

Förster resonance energy transfer investigations using quantum-dot fluorophores.

Förster resonance energy transfer (FRET), which involves the nonradiative transfer of excitation energy from an excited donor fluorophore to a proximal ground-state acceptor fluorophore, is a well-characterized photophysical tool. It is very sensitive to nanometer-scale changes in donor-acceptor separation distance and their relative dipole orientations. It has found a wide range of applications in analytical chemistry, protein conformation studies, and biological assays. Luminescent semiconductor nanocrystals (quantum dots, QDs) are inorganic fluorophores with unique optical and spectroscopic properties that could enhance FRET as an analytical tool, due to broad excitation spectra and tunable narrow and symmetric photoemission. Recently, there have been several FRET investigations using luminescent QDs that focused on addressing basic fundamental questions, as well as developing targeted applications with potential use in biology, including sensor design and protein conformation studies. Herein, we provide a critical review of those developments. We discuss some of the basic aspects of FRET applied to QDs as both donors and acceptors, and highlight some of the advantages offered (and limitations encountered) by QDs as energy donors and acceptors compared to conventional dyes. We also review the recent developments made in using QD bioreceptor conjugates to design FRET-based assays.

Fluorescence Resonance Energy Transfer↗
PubMed2005

Quantum dot-based multiplexed fluorescence resonance energy transfer.

We demonstrate the use of luminescent quantum dots (QDs) conjugated to dye-labeled protein acceptors for nonradiative energy transfer in a multiplexed format. Two configurations were explored: (1) a single color QD interacting with multiple distinct acceptors and (2) multiple donor populations interacting with one type of acceptor. In both cases, we showed that simultaneous energy transfer between donors and proximal acceptors can be measured. However, data analysis was simpler for the configuration where multiple QD donors are used in conjunction with one acceptor. Steady-state fluorescence results were corroborated by time-resolved measurements where selective shortening of QD lifetime was measured only for populations that were selectively engaged in nonradiative energy transfer.

Carrier Proteins↗
PubMed2005

Decoration of discretely immobilized cowpea mosaic virus with luminescent quantum dots.

This report describes two related methods for decorating cowpea mosaic virus (CPMV) with luminescent semiconductor nanocrystals (quantum dots, QDs). Variants of CPMV are immobilized on a substrate functionalized with NeutrAvidin using modifications of biotin-avidin binding chemistry in combination with metal affinity coordination. For example, using CPMV mutants expressing available 6-histidine sequences inserted at loops on the viral coat protein, we show that these virus particles can be specifically immobilized on NeutrAvidin functionalized substrates in a controlled fashion via metal-affinity coordination. To accomplish this, a hetero-bifunctional biotin-NTA moiety, activated with nickel, is used as the linker for surface immobilization of CPMV (bridging the CPMVs' histidines to the NeutrAvidin). Two linking chemistries are then employed to achieve CPMV decoration with hydrophilic CdSe-ZnS core-shell QDs; they target the histidine or lysine residues on the exterior virus surface and utilize biotin-avidin interactions. In the first scheme, QDs are immobilized on the surface-tethered CPMV via electrostatic attachment to avidin previously bound to the virus particle. In the second strategy, the lysine residues common to each viral surface asymmetric unit are chemically functionalized with biotin groups and the biotinylated CPMV is discretely immobilized onto the substrate via NeutrAvidin-biotin interactions. The biotin units on the upper exposed surface of the immobilized CPMV then serve as capture sites for QDs conjugated with a mixture of avidin and a second protein, maltose binding protein, which is also used for QD-protein conjugate purification. Characterization of the assembled CPMV and QD structures is presented, and the potential uses for protein-coated QDs functionalized onto this symmetrical virion nanoscaffold are discussed.

Chromogenic Compounds↗
PubMed2005

A hybrid quantum dot-antibody fragment fluorescence resonance energy transfer-based TNT sensor.

We demonstrate the use of luminescent QDs conjugated to antibody fragments to develop solution-phase nanoscale sensing assemblies, based on fluorescence resonance energy transfer (FRET) for the specific detection of the explosive 2,4,6-trinitrotoluene (TNT) in aqueous environments. The hybrid sensor consists of anti-TNT specific antibody fragments attached to a hydrophilic QD via metal-affinity coordination. A dye-labeled TNT analogue prebound in the antibody binding site quenches the QD photoluminescence via proximity-induced FRET. Analysis of the data collected at increasing dye-labeled analogue to QD ratios provided an insight into understanding how the antibody fragments self-assemble on the QD. Addition of soluble TNT displaces the dye-labeled analogue, eliminating FRET and resulting in a concentration-dependent recovery of QD photoluminescence. Sensor performance and specificity were evaluated.

Cadmium Compounds↗
PubMed2005

Synthesis of compact multidentate ligands to prepare stable hydrophilic quantum dot fluorophores.

We describe a simple and versatile scheme to prepare an array of heterofunctional multidentate ligands that permit strong and stable interactions with colloidal semiconductor nanocrystals (quantum dots, QDs) and render them soluble in aqueous environments. These ligands were synthesized by reacting various chain length poly(ethylene glycols) with thioctic acid, followed by ring opening of the dithiolane moiety, creating a bidentate thiol motif with enhanced affinity for CdSe-ZnS core-shell QDs. Functionalization with these ligands permits processability of the nanocrystals not only in aqueous but also in many other polar solvents. These ligands provide a straightforward means of preparing QDs that exhibit greater resistance to environmental changes, making them more amenable for use in live cell imaging and other biotechnological applications.

Biotechnology↗
PubMed2005

Can luminescent quantum dots be efficient energy acceptors with organic dye donors?

We assessed the ability of luminescent quantum dots (QDs) to function as energy acceptors in fluorescence resonance energy transfer (FRET) assays, with organic dyes serving as donors. Either AlexaFluor 488 or Cy3 dye was attached to maltose binding protein (MBP) and used with various QD acceptors. Steady-state and time-resolved fluorescence measurements showed no apparent FRET from dye to QD. We attribute these observations to the dominance of a fast radiative decay rate of the donor excitation relative to a slow FRET decay rate. This is due to the long exciton lifetime of the acceptor compared to that of the dye, combined with substantial QD direct excitation.

Carbocyanines↗
PubMed2005

Quantum dot bioconjugates for imaging, labelling and sensing.

One of the fastest moving and most exciting interfaces of nanotechnology is the use of quantum dots (QDs) in biology. The unique optical properties of QDs make them appealing as in vivo and in vitro fluorophores in a variety of biological investigations, in which traditional fluorescent labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple signals. The ability to make QDs water soluble and target them to specific biomolecules has led to promising applications in cellular labelling, deep-tissue imaging, assay labelling and as efficient fluorescence resonance energy transfer donors. Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible bioconjugation techniques. In this review, we look at current methods for preparing QD bioconjugates as well as presenting an overview of applications. The potential of QDs in biology has just begun to be realized and new avenues will arise as our ability to manipulate these materials improves.

Biosensing Techniques↗
PubMed2005

Fluoroimmunoassays using antibody-conjugated quantum dots.

Luminescent colloidal semiconductor nanocrystals (quantum dots) are robust inorganic fluoro phores that have the potential to circumvent some of the functional limitations encountered by organic dyes in sensing and biotechnological applications. Quantum dots exhibit size-dependent tunable, narrow fluorescence emission spectra that span the visible spectrum and have broad absorption spectra. This allows simultaneous excitation of several particle sizes at a single wavelength with emission at multiple wavelengths. Quantum dots also provide a high-resistance threshold to chemical degradation and photodegradation. We have developed a conjugation strategy for the attachment of antibodies to quantum dots based on electrostatic interactions between negatively charged dihydrolipoic acid (DHLA)-capped CdSe-ZnS core-shell quantum dots and positively charged proteins (natural or engineered) that serve to bridge the quantum dot and antibody. This chapter details the materials and methods for synthesis of the DHLA-capped CdSe-ZnS core-shell quantum dots, the construction and preparation of recombinant proteins, the conjugation of antibodies to quantum dots, and the use of antibody-coated quantum dots in a fluoroimmunoassay.

Animals↗
PubMed2004

Surface-immobilized self-assembled protein-based quantum dot nanoassemblies.

Luminescent semiconductor quantum dot (QD)-based optical biosensors have the potential to overcome many of the limitations associated with using conventional organic dyes for biodetection. We have previously demonstrated a hybrid QD-protein-based fluorescence resonance energy transfer (FRET) sensor. Although the QD acted as an energy donor and a protein scaffold in the sensor, recognition and specificity were derived from the proteins. Transitioning this hybrid prototype sensor into flow cells and integrated devices will require a surface-immobilization strategy that allows the QD-based sensor to sample the environment and still maintain a distinct protein-covered QD architecture. We demonstrate a self-assembled strategy designed to accomplish this. Using glass slides coated with a monolayer of neutravidin (NA) as the template, QDs with maltose binding protein (MBP) and avidin coordinated to their surface were attached to the glass slides in discrete patterns using an intermediary bridge of biotinylated MBP or antibody linkers. Control of the surface location and concentration of the QD-protein-based structures is demonstrated. The utility of this self-assembly strategy is further demonstrated by assembling a QD-protein structure that allows the QDs to engage in FRET with a dye located on the surface-covering protein.

Avidin↗
PubMed2004

Tracking metastatic tumor cell extravasation with quantum dot nanocrystals and fluorescence emission-scanning microscopy.

Metastasis is an impediment to the development of effective cancer therapies. Our understanding of metastasis is limited by our inability to follow this process in vivo. Fluorescence microscopy offers the potential to follow cells at high resolution in living animals. Semiconductor nanocrystals, quantum dots (QDs), offer considerable advantages over organic fluorophores for this purpose. We used QDs and emission spectrum scanning multiphoton microscopy to develop a means to study extravasation in vivo. Although QD labeling shows no deleterious effects on cultured cells, concern over their potential toxicity in vivo has caused resistance toward their application to such studies. To test if effects of QD labeling emerge in vivo, tumor cells labeled with QDs were intravenously injected into mice and followed as they extravasated into lung tissue. The behavior of QD-labeled tumor cells in vivo was indistinguishable from that of unlabeled cells. QDs and spectral imaging allowed the simultaneous identification of five different populations of cells using multiphoton laser excitation. Besides establishing the safety of QDs for in vivo studies, our approach permits the study of multicellular interactions in vivo.

Animals↗
PubMed2004

Multiplexed toxin analysis using four colors of quantum dot fluororeagents.

Quantum dots (QDs) have the potential to simplify the performance of multiplexed analysis. In this work, we prepared bioinorganic conjugates made with highly luminescent semiconductor nanocrystals (CdSe-ZnS core-shell QDs) and antibodies to perform multiplexed fluoroimmunoassays. Sandwich immunoassays for the detection of cholera toxin, ricin, shiga-like toxin 1, and staphylococcal enterotoxin B were performed simultaneously in single wells of a microtiter plate. Initially the assay performance for the detection of each toxin was examined. We then demonstrated the simultaneous detection of the four toxins from a single sample probed with a mixture of all four QD-antibody reagents. Using a simple linear equation-based algorithm, it was possible to deconvolute the signal from mixed toxin samples, which allowed quantitation of all four toxins simultaneously.

Cadmium↗
PubMed2004

Fluorescence resonance energy transfer between quantum dot donors and dye-labeled protein acceptors.

We used luminescent CdSe-ZnS core-shell quantum dots (QDs) as energy donors in fluorescent resonance energy transfer (FRET) assays. Engineered maltose binding protein (MBP) appended with an oligohistidine tail and labeled with an acceptor dye (Cy3) was immobilized on the nanocrystals via a noncovalent self-assembly scheme. This configuration allowed accurate control of the donor-acceptor separation distance to a range smaller than 100 A and provided a good model system to explore FRET phenomena in QD-protein-dye conjugates. This QD-MBP conjugate presents two advantages: (1) it permits one to tune the degree of spectral overlap between donor and acceptor and (2) provides a unique configuration where a single donor can interact with several acceptors simultaneously. The FRET signal was measured for these complexes as a function of both degree of spectral overlap and fraction of dye-labeled proteins in the QD conjugate. Data showed that substantial acceptor signals were measured upon conjugate formation, indicating efficient nonradiative exciton transfer between QD donors and dye-labeled protein acceptors. FRET efficiency can be controlled either by tuning the QD photoemission or by adjusting the number of dye-labeled proteins immobilized on the QD center. Results showed a clear dependence of the efficiency on the spectral overlap between the QD donor and dye acceptor. Apparent donor-acceptor distances were determined from efficiency measurements and corresponding Förster distances, and these results agreed with QD bioconjugate dimensions extracted from structural data and core size variations among QD populations.

Cadmium Compounds↗