PubMed Health⌕ Search

Biomedical subjects

Heinz Amenitsch

Publications and source records attributed to Heinz Amenitsch.

At least 19 recordsLinked to original sources

Two-dimensional lipid mixing entropy regulates the formation of multicomponent lipoplexes.

The mechanism of formation of multicomponent lipoplexes was investigated by means of synchrotron Small-Angle X-ray Diffraction (SAXD). Mixed lipid dispersions were prepared by mixing different populations of binary cationic liposomes. When adding DNA to mixed lipid dispersions, multicomponent lipoplexes spontaneously formed exhibiting structural properties, i.e., membrane thickness, surface charge density, and one-dimensional DNA packing density, intermediate between those of binary lipoplexes. These results suggested that DNA lets liposomes come into contact and fuse and that a complete lipid mixing at the molecular level occurs. The equilibrium structure of multicomponent lipoplexes was found to be unique and did not depend on the number and kind of populations composing lipid dispersion but only on the lipid species involved and on their relative molar ratio. According to recent theoretical models we identified two-dimensional lipid mixing entropy as the key factor regulating the existence of only multicomponent lipoplexes with ideally mixed lipid species.

Entropy↗

A mesoporous pattern created by nature in spicules from Thetya aurantium sponge.

Siliceous or carbonate spicules provide support and defense to marine sponges. The inorganic envelope usually embodies a protein core. Our SAXS study of the siliceous spicules from the demosponge Thetya aurantium proves the very ordered structure assumed by the protein core inside the spicules. Indeed, not only the very sharp diffraction spots already found in previous studies on spicules from different sponges are confirmed, but also the 11 sharp spots in the diffraction pattern recorded after thermal treatment at 250 degrees C can only be interpreted in terms of a natural nanocomposite mesostructure with an hexagonal lattice formed by a three-dimensional periodic arrangement of silica cages in which the protein units act as structure directing agent.

Animals↗

Detailed in situ XRD and calorimetric study of the formation of silicate/mixed surfactant mesophases under alkaline conditions. Influence of surfactant chain length and synthesis temperature.

The formation of mesoscopically ordered silica/surfactant composites under alkaline synthesis conditions has been studied by time-resolved in situ small-angle X-ray diffraction with synchrotron radiation. Alkyltrimethylammoniumbromide surfactants, C(n)()TAB, of different chain lengths (n = 14, 16, and 18) as well as mixtures thereof were used as structure directing agents and the measurements were carried out at two different temperatures. A linear relationship between the mean surfactant chain length and the d spacing of the hexagonal phase was observed, suggesting an ideal mixing of the surfactants in the supramolecular surfactant aggregates. It is shown that the formation of the hexagonal phase is kinetically controlled mainly by the rate of silicate condensation, while the effect of changes in the surfactant chain length on the kinetics is small under the studied conditions. Two concominant, albeit partly interlinked, processes, suggested being intra- and intermicellar condensation, followed by aggregate-aggregate condensation, govern the nucleation and growth of the hexagonal phase. The two-step mechanism is confirmed by a microcalorimetric study where the heat evolved during the hydrolysis-condensation reactions is followed as a function of time.

Journal Article↗

One-dimensional thermotropic dilatation area of lipid headgroups within lamellar lipid/DNA complexes.

Using simultaneous synchrotron small- and wide-angle X-ray diffraction (SWAXD), we investigated the thermotropic behavior of a cationic lipid mixture of DOTAP-DOPC (1,2-dioleoyl-3-trimethylammonium-propane-dioleoylphosphatidylcholine) liposomes complexed with calf thymus DNA. The DOTAP-DOPC/DNA complex reacts to temperature change by a bilayer compression normal to its surface and an expansion of the DNA in the plane of the rod lattice. By applying two independent recently developed models, we show here for the first time that the thermotropic dilatation area of lipid headgroups within the complexes is not isotropic but occurs parallel to the 1D DNA lattice (i.e., along the direction perpendicular to the DNA axis). Our results shed light on the role of spatial dimensionality in the DNA packing density within lamellar lipoplexes and provide experimental evidence that the interaction between DNA molecules confined between lipid bilayers can be regarded as a 1D problem.

Animals↗

Temperature dependence of chaperone-like activity and oligomeric state of alphaB-crystallin.

The chaperone-like activity and the oligomeric state of alphaB-crystallin were studied at different temperatures and in the presence of urea and thiocyanate. The activity, assessed measuring the ability of alphaB-crystallin to prevent the aggregation of denatured insulin, strongly depends on temperature. While a significant activity increase was detected at 42 degrees C, the presence of urea and thiocyanate does not affect the protein activity in an irreversible way. In-solution SAXS measurements performed in the same experimental conditions showed that alphaB-crystallin forms near-spherical, hollowed, polydisperse oligomers, whose dimensions change above 42 degrees C. Moreover, in the presence of urea and thiocyanate, a global fit analysis confirms the high stability of alphaB-crystallin assemblies in relationship with their variable quaternary structure. In particular, the changes in the inner radius as well as the thickness and dispersion of the protein shell, account for the preservation of the chaperone-like activity.

Dimerization↗

Multicomponent cationic lipid-DNA complex formation: role of lipid mixing.

Multicomponent cationic lipid-DNA complexes (lipoplexes) were prepared by adding linear DNA to mixed lipid dispersions containing two populations of binary cationic liposomes and characterized by means of small angle X-ray scattering (SAXS). Four kinds of cationic liposomes were used. The first binary lipid mixture was made of the cationic lipid (3'[N-(N',N'-dimethylaminoethane)-carbamoyl]cholesterol (DC-Chol) and the neutral helper lipid dioleoylphosphocholine (DOPC) (DC-Chol/DOPC liposomes), the second one of the cationic 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and the neutral dioleoylphosphatidylethanolamine (DOPE) (DOTAP/DOPE liposomes), the third one of DC-Chol and DOPE (DC-Chol/DOPE liposomes), and the fourth one of DOTAP and DOPC (DOTAP/DOPC liposomes). Upon DNA-induced fusion of liposomes, large lipid mixing at the molecular level occurs. As a result, highly organized mixed lipoplexes spontaneously form with membrane properties intermediate between those of starting liposomes. By varying the composition of lipid dispersions, different DNA packing density regimes can also be achieved. Furthermore, occurring lipid mixing was found to induce hexagonal to lamellar phase transition in DOTAP/DOPE membranes. Molecular mechanisms underlying experimental findings are discussed.

Cations↗

Thermal-induced phase transitions in self-assembled mesostructured films studied by small-angle X-ray scattering.

Two examples of phase transition in self-assembled mesostructured hybrid thin films are reported. The materials have been synthesized using tetraethoxysilane as the silica source hydrolyzed with or without the addition of methyltriethoxysilane. The combined use of transmission electron microscopy, small-angle X-ray scattering and computer simulation has been introduced to achieve a clear identification of the organized phases. A structural study of the self-assembled mesophases as a function of thermal treatment has allowed the overall phase transition to be followed. The initial symmetries of mesophases in as-deposited films have been linked to those observed in samples after thermal treatment. The monodimensional shrinkage of silica films during calcination has induced a phase transition from face-centered orthorhombic to body-centered cubic. In hybrid films, instead, the phase transition has not involved a change in the unit cell but a contraction of the cell parameter normal to the substrate.

Journal Article↗

Highly ordered "defect-free" self-assembled hybrid films with a tetragonal mesostructure.

One-pot self-assembled hybrid films were synthesized by the cohydrolysis of methyltriethoxysilane and tetraethoxysilane and deposited via dip-coating. The films show a high "defect-free" mesophase organization that extends throughout the film thickness and for domains of a micrometer scale, as shown by scanning transmission electron microscopy. We have defined these films defect-free to describe the high degree of order that is achieved without defects in the pore organization, such as dislocations of pores or stacking faults. A novel mesophase, which is tetragonal I4/mmm (space group), is observed in the films. This phase evolves but retains the same symmetry throughout a wide range of temperatures of calcination. The thermal stability and the structural changes as a function of the calcination temperature have been studied by small-angle X-ray scattering, scanning transmission electron microscopy, and Fourier transform infrared spectroscopy. In situ Fourier transform infrared spectroscopy employing synchrotron radiation has been used to study the kinetics of film formation during the deposition. The experiments have shown that the slower kinetics of silica species can explain the high degree of organization of the mesostructure.

Journal Article↗

Self-assembly and crystallization behavior of mesoporous, crystalline HfO2 thin films: a model system for the generation of mesostructured transition-metal oxides.

Mesoporous thin films of crystalline hafnium oxide were fabricated by evaporation-induced self-assembly in combination with sol-gel processing, followed by a suitable post heat-treatment procedure to initiate the crystallization. A novel type of block-copolymer template was used as structure-directing agent, which generated a distorted cubic arrangement of spherical mesopores, the size of which could be quantified by suitable techniques, such as ellipsometry-porosimetry, small-angle X-ray scattering, and atomic force microscopy. Detailed insights into the nature of the crystallization process of mesostructured hafnium oxide were obtained by temperature-dependent, in situ X-ray scattering experiments. These investigations revealed that crystallization takes place, within the confinement of the mesostructure, as a solid-solid transition from a dehydrated, amorphous form of hafnium oxide. The study suggests that one main benefit of the novel template results from the ability of the polymer to stabilize the mesostructure of amorphous hafnium oxide up to 400-450 degrees C.

Crystallization↗

Elucidation of the isomeric domains formed by sodium N-dodecanoyl-L-prolinate.

Investigations aimed at clarifying the nature of geometrical domains of amidic sodium N-dodecanoyl-l-prolinate are reported. NMR investigations on the association of aromatic solutes with the aggregates formed by the amidic surfactant in water show the selective binding of some solutes to the Z domains. Fluorescence quenching experiments allowed us to measure the aggregation number of the aggregates. SAXS experiments gave the average size and structural features of the aggregates. A NMR ROESY experiment evidenced the mosaic-like nature of the domains inside the same aggregate.

Lauric Acids↗

Phospholipid mesophases at solid interfaces: in-situ X-ray diffraction and spin-label studies.

In this work, we report on recent investigations, both on the global and on the local molecular architecture of supported phospholipid model membranes. A brief theoretical introduction explains how global structural information on supramolecular lipid ensembles can be retrieved from surface X-ray diffraction measurements as well as how spin-label electron paramagnetic resonance spectroscopy (EPR) provides complementary information on the local environment of probe molecules. The combination of especially designed X-ray cells with the technique of small- and wide-angle X-ray surface scattering makes it possible to explore various fields of lipid research and its applications. Examples for different physico-chemical conditions are presented: (i) in situ chemistry under excess of water conditions demonstrating how solid-supported lipid films sense salinity, (ii) the 3D electron density reconstruction of a vesicle-fusion intermediate under controlled humidity, and (iii) complementary temperature and pressure effects on oriented phospholipid samples. Further, special attention has been given to the influence of different film preparation techniques with respect to quality and the defect structure manifestation. To resolve the proportions and local properties of defects in a hydrated lipid-deposited surface, spin-label EPR was applied. The results from 9.6 GHz EPR as well as from 1.2 GHz EPR suggest the alignment to be in the range between 30% and 80%. In addition, slow time-dependent EPR measurements point to nano-structural rearrangements due to water flow and reduction of alignment quality.

Cell Membrane↗

Time-resolved in situ studies of the formation of cubic mesoporous silica formed with triblock copolymers.

The mechanism of formation of two different cubic mesoporous silica materials formed with Pluronic triblock copolymers is investigated with in situ time-resolved small-angle synchrotron X-ray scattering, in situ time-resolved 1H nuclear magnetic resonance, and time-resolved transmission electron microscopy. The materials studied are the micellar cubic (Imm) SBA-16 formed with Pluronic F108 and the bicontinuous cubic (Iad) silica material formed with Pluronic P103 and NaI. The formation mechanisms of the two cubic structures are shown to be dissimilar. For the Imm material, in the early stages of the synthesis, flocs of unordered micelles are observed, but areas where the micelles have started to order are also present. With time, there is an increase in order; however, there is a coexistence of unordered micelles and ordered material all through this study. The bicontinuous cubic silica is formed via a different path. The system is phase-separated already before the addition of the silica source, which implies that a concentrated phase is present, acting as the structure director of the Iad structure. The results are compared with earlier reports on the formation of the hexagonal SBA-15 material.

Journal Article↗

Periodically ordered nanoscale islands and mesoporous films composed of nanocrystalline multimetallic oxides.

Innovative strategies to produce well-defined nanoparticles and other nanostructures such as nanofibres, quantum wells and mesoporous materials have revitalized materials science for the potential benefit to society. Here, we report a controlled process, involving soft-chemistry-based deposition, template-assisted mesostructured growth, and tuned annealing conditions that allows the preparation of ordered mesoporous crystalline networks and mesostructured nano-island single layers, composed of multicationic metal oxides having perovskite, tetragonal or ilmenite structures. This strategy to obtain meso-organized multi-metal-oxide nanocrystalline films (M(3)NF) bridges the gap between conventional mesoporous materials and the remarkable properties of crystalline ternary or quaternary metallic oxides. Nanocrystalline mesoporous films with controlled wall thickness (10-20 nm) of dielectric SrTiO(3), photoactive MgTa(2)O(6) or ferromagnetic semi-conducting Co(x)Ti(1-x)O(2-x) were prepared by evaporation-induced self-assembly (EISA) using a specially designed non-ionic block-copolymer template. A tuned thermal treatment of the mesoporous films permits the transfer of the wall structure into nanocrystallites, with all tectonic units being tightly incorporated into mechanically stable ordered tri- or bidimensional nanocrystalline networks. This methodology should allow multifunctionalization, miniaturization and integration during development of devices such as smart sensors and actuators, better-performing photocatalysts, and fast electrochromic devices. On the other hand, organized arrays of dispersed ferromagnetic or ferroelectric nanoparticles are promising materials for spintronics and for cheap, non-volatile 'flash' memories.

Crystallization↗

In situ synchrotron small-angle X-ray scattering/X-ray diffraction study of the formation of SBA-15 mesoporous silica.

The initial stages of the formation of SBA-15 have been studied by in situ SAXS/XRD using synchrotron radiation. Modeling of both the diffuse scattering and the X-ray diffraction patterns obtained at different stages of the reaction results in a detailed description of the different reaction steps. The first step in the formation is the liquid-liquid phase separation of spherical P123-silicate hybrid micelles after which nucleation and growth of the 2D hexagonal phase occurs. Two-dimensional electron density maps calculated on the basis of the intensities of the Bragg reflections suggest that changes in the degree of intermicellar condensation are responsible for the time-dependent observations. The silica source (alkoxysilanes) may be partially unhydrolyzed long after formation of the hexagonal structure, since the kinetics of the mesophase evolution is notably slower when TEOS is used as the silica precursor as compared to TMOS. The results obtained for SBA-15 are compared with other published data on the formation ofSBA-15 and of the smaller pore MCM-41 materials.

Journal Article↗

In situ sensing of salinity in oriented lipid multilayers by surface X-ray scattering.

The influence of LiCl solutions on liposomal and surface-supported phosphatidylcholine/water systems (dipalmitoylphosphatidylcholine (DPPC) and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC), respectively) has been studied by small-angle X-ray techniques. In liposomal dispersions of DPPC, an osmotically stressed liquid-crystalline phase, denoted as Lalpha osm, forms readily after rapid mixing with salt solutions. The transition from Lalpha -->Lalpha osm proceeds in two steps. The first step takes place within seconds and is due to water diffusion from the liposome into the bulk solution. The second, slower process (minutes) can be attributed to the relaxation of initially deformed intermediate liposomes into spherical ones. In experiments with aligned lipid bilayers supported on silicon wafers, it was possible to reproducibly exchange different concentrations of LiCl solutions on a single sample and to determine the lattice changes by time-resolved X-ray scattering at grazing incidence. Independently of the deposition technique (spray- or spin-coating, respectively), none of the investigated POPC samples displayed an osmotically stressed liquid-crystalline phase. While liposomes can be considered nearly defect-free, supported bilayer stacks show a high abundance of defects, such as oily streaks typical of the Lalpha phase. Thus, the alkali ions are free to diffuse into the interbilayer water regions and to cause a slight increase of the bilayer separation (about 1 Angstroms). It is concluded that low to medium concentrations of Li+ ions partially screen the attractive van der Waals force between adjacent membrane layers. However, upon annealing the defect regions or regions of high curvature in the oriented lipid matrix, e.g. by low amounts of oleyl alcohol (OA), the system is able to sense osmotic stress upon addition of a salt solution.

1,2-Dipalmitoylphosphatidylcholine↗

Development of a two-dimensional virtual-pixel X-ray imaging detector for time-resolved structure research.

An interpolating two-dimensional X-ray imaging detector based on a single-photon counter with gas amplification by GEM (gas electron multiplier) structures is presented. The detector system can be used for time-resolved structure research down to the micro s time domain. The prototype detector has been tested at the SAXS (small-angle X-ray scattering) beamline at ELETTRA synchrotron light source with a beam energy of 8 keV. The imaging performance is examined with apertures and standard diffraction targets. Finally, the application in a time-resolved lipid temperature-jump experiment is presented.

Animals↗

Structural characterization of siliceous spicules from marine sponges.

Siliceous sponges, one of the few animal groups involved in a biosilicification process, deposit hydrated silica in discrete skeletal elements called spicules. A multidisciplinary analysis of the structural features of the protein axial filaments inside the spicules of a number of marine sponges, belonging to two different classes (Demospongiae and Hexactinellida), is presented, together with a preliminary analysis of the biosilicification process. The study was carried out by a unique combination of techniques: fiber diffraction using synchrotron radiation, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetric (DSC), Fourier transform infrared spectroscopy (FTIR), and molecular modeling. From a phylogenetic point of view, the main result is the structural difference between the dimension and packing of the protein units in the spicule filaments of the Demospongiae and the Hexactinellida species. Models of the protein organization in the spicule axial filaments, consistent with the various experimental evidences, are given. The three different species of demosponges analyzed have similar general structural features, but they differ in the degree of order. The structural information on the spicule axial filaments can help shed some light on the still unknown molecular mechanisms controlling biosilicification.

Animals↗