PubMed Health⌕ Search

Biomedical subjects

Herbert Mayr

Publications and source records attributed to Herbert Mayr.

At least 19 recordsLinked to original sources
PubMed2005

The DMAP-catalyzed acetylation of alcohols--a mechanistic study (DMAP = 4-(dimethylamino)pyridine).

The acetylation of tert-butanol with acetic anhydride catalyzed by 4-(dimethylamino)pyridine (DMAP) has been studied at the Becke3 LYP/6-311 + G(d,p)//Becke3 LYP/6-31G(d) level of theory. Solvent effects have been estimated through single-point calculations with the PCM/UAHF solvation model. The energetically most favorable pathway proceeds through nucleophilic attack of DMAP at the anhydride carbonyl group and subsequent formation of the corresponding acetylpyridinium/acetate ion pair. Reaction of this ion pair with the alcohol substrate yields the final product, tert-butylacetate. The competing base-catalyzed reaction pathway can either proceed in a concerted or in a stepwise manner. In both cases the reaction barrier far exceeds that of the nucleophilic catalysis mechanism. The reaction mechanism has also been studied experimentally in dichloromethane through analysis of the reaction kinetics for the acetylation of cyclohexanol with acetic anhydride, in the presence of DMAP as catalyst and triethylamine as the auxiliary base. The reaction is found to be first-order with respect to acetic anhydride, cyclohexanol, and DMAP, and zero-order with respect to triethyl amine. Both the theoretical as well as the experimental studies strongly support the nucleophilic catalysis pathway.

Journal Article↗
PubMed2005

Kinetics of the reactions of halide anions with carbocations: quantitative energy profiles for s(n)1 reactions.

Rate constants for the reactions of Laser flash photolytically generated benzhydrylium ions (diarylcarbenium ions) with halide ions have been determined in various solvents, including neat and aqueous acetonitrile as well as some alcohols. Substitution of the rate constants into the correlation equation log k = s(N + E) yields the nucleophilicity parameters N for the halide ions in different solvents. Linear correlations with negative slopes are found between the nucleophilicity parameters N for Cl(-) and Br(-) in different solvents and the solvent ionizing powers Y of the corresponding solvents. Increasing halide solvation reduces the rates of carbocation/chloride combinations by approximately half as much as it increases the rates of ionizations of benzhydryl chlorides. Comparison of the solvent dependent nucleophilicity parameters N of halide anions and the nucleophilicity parameters N(1) for solvents yields a quantitative prediction of common ion rate depression, as demonstrated by the analysis of a variety of literature reported mass-law constants alpha. Combination of the rate constants for the reactions of benzhydrylium ions with halide ions (k(-)()(1)) reported in this work with the ionization constants of benzhydryl halides (k(1)) and the recently reported rate constants for the reactions of benzhydrylium ions with solvents (k(2)) yields complete quantitative free energy profiles for solvolysis reactions. The applicability of Hammond's postulate for interpreting solvolysis reactions can thus be examined quantitatively.

Journal Article↗
PubMed2005

Rates and equilibria of the reactions of tertiary phosphanes and phosphites with benzhydrylium ions.

The kinetics of the reactions of benzhydrylium ions and quinone methides with eight tertiary phosphanes and two phosphites were investigated photometrically. The nucleophilicity parameters N and slope parameters s of these nucleophiles were derived according to the equation log k(20 degrees C) = s(N + E). Correlations of the nucleophilicity parameters N with pK(Ha) and sigma(p) values as well as with the rate constants of reactions with other electrophiles are discussed. In some cases, equilibrium constants for the formation of phosphonium ions were measured, which allow one to determine the Marcus intrinsic barriers of DeltaG(0) (not equal) = 58 kJ mol(-1) for the reactions of triarylphosphanes with benzhydrylium ions. The N parameters [5.51 for P(OPh)3, 10.36 for P(OBu)3, 14.33 for PPh3, 15.49 for PBu3, 18.39 for P(4-Me2NC6H4)3] are compared with the reactivities of other classes of nucleophiles (see, www.cup. uni-muenchen.de/oc/mayr).

Benzhydryl Compounds↗
PubMed2004

Nucleophilicities of nitroalkyl anions.

The kinetics of the reactions of eight nitroalkyl anions (nitronate anions) with benzhydrylium ions and quinone methides in DMSO and water were investigated photometrically. The second-order rate constants were found to follow a Ritchie constant selectivity relationship with slightly smaller selectivities than those observed previously for other carbanions and O or N nucleophiles. Evaluation of the kinetic data by the correlation equation log k (20 degrees C) = s(N + E) yields the nucleophilicity parameters (N), which allow a comparison of the nucleophilicities of nitronates with those of other classes of compounds. Although the aliphatic nitronates 1a-c are more nucleophilic than the aromatic representatives 1d-h in DMSO, hydration reduces the nucleophilicities of aliphatic nitronates by a factor of 1 million, which is considerably greater than the reduction of the reactivities of the aromatic nitronates with the consequence that aromatic nitronates are more nucleophilic in water than aliphatic ones. The nucleophilic reactivities of nitronates are only slightly affected by substituent variation in DMSO and even less so in aqueous solution, which is considered to be the reason for the unusual rate equilibrium relationships, the so-called nitroalkane anomaly. Outer-sphere electron transfer does not occur in any of the reactions that were investigated.

Journal Article↗
PubMed2004

Solvent nucleophilicity.

The rates of the reactions of benzhydrylium ions (diarylcarbenium ions) with solvent mixtures of variable composition (water/acetonitrile, methanol/acetonitrile, ethanol/acetonitrile, ethanol/water, and trifluoroethanol/water) have been determined photometrically by conventional UV-vis spectroscopy, stopped-flow methods, and laser flash techniques. It has been shown that the first-order rate constants follow the previously published relationship log k(20 degrees C) = s(N + E), where E is an empirical electrophilicity parameter, N is an empirical nucleophilicity parameter, and s is a nucleophile-specific slope parameter. From plots of log k versus E of the benzhydrylium ions are derived the solvent nucleophilicity parameters s and N, the latter of which are designated as N1 to emphasize that their use in the quoted correlation equation gives rise to first-order rate constants. A linear correlation between N1 and Kevill's solvent nucleophilicity NT based on S-methyldibenzothiophenium ions is reported, which allows one to interconvert the two sets of data. Because the N1 values are directly comparable to the previously reported nucleophilicity parameters N for pi-systems (www.cup.uni-muenchen.de/oc/mayr/), the systematic design of Friedel-Crafts reactions with solvolytically generated carbocations becomes possible.

Journal Article↗
PubMed2003

Ambident reactivity of the thiocyanate anion revisited: can the product ratio be explained by the hard soft acid base principle?

Laser flash photolysis and stopped-flow methods have been employed to determine the kinetics of the reactions of benzhydrylium ions with both termini of the thiocyanate ion. In contrast to previous investigations which reported sulfur/nitrogen ratios of k(S)/k(N) = 2-10 for the reactions of carbocations with SCN(-), values of k(S)/k(N) = 10(3)-10(4) are now derived from absolute rate constants. This discrepancy is explained by the fact that the data determined in this investigation are the first which refer to activation-controlled attack of carbocations at both termini of the thiocyanate ion, while previous reactivity ratios included diffusion-controlled reactions. It is concluded that the selectivities of the reactions of carbocations with the thiocyanate ion cannot be explained by the hard soft acid base principle.

Journal Article↗
PubMed2003

Nucleophilic reactivities of carbanions in water: the unique behavior of the malodinitrile anion.

The kinetics of the reactions of nine carbanions 1a-i, each stabilized by two acyl, ester, or cyano groups, with benzhydrylium ions in water were investigated photometrically at 20 degrees C. Because the competing reactions of the benzhydrylium ions with water and hydroxide ions are generally slower, the second-order rate constants of the reactions of the benzhydrylium ions with the carbanions can be determined with high precision. The rate constants thus obtained can be described by the Ritchie equation, log(k/k(0)) = N(+) (eq 1), which allows us to calculate Ritchie N(+) parameters for a series of stabilized carbanions, for example, malonate, acetoacetate, malodinitrile, etc., and compare them with those of other n-nucleophiles in water (hydroxide, amines, azide, thiolates, etc.). Because the Ritchie relationship (eq 1) is a special case of the more general relationship log k = s(N + E) (eq 4), the reactivity parameters N and s for the carbanions 1a-i can also be calculated and compared with the nucleophilic reactivities of a large variety of n-, pi-, and sigma-nucleophiles, including reactivities of carbanions in dimethyl sulfoxide. While the acyl and ester substituted carbanions are approximately 3 orders of magnitude less reactive in water than in dimethyl sulfoxide, the malodinitrile anion (1i) shows almost the same reactivity in both solvents. Correlations between the nucleophilic reactivities of carbanions with the pK(a) values of the corresponding CH acids reveal that the malodinitrile anion (1i) is considerably more nucleophilic than was expected on the basis of its pK(a) value. This deviation is assigned to the exceptionally low Marcus intrinsic barriers of the reactions of the malodinitrile anion (1i).

Journal Article↗
PubMed2003

Role of electron-transfer processes in reactions of diarylcarbenium ions and related quinone methides with nucleophiles.

Second-harmonic alternating current voltammetry has been used to determine one-electron reduction potentials of 15 diarylcarbenium ions and 5 structurally analogous quinone methides, which have been employed as reference electrophiles for the development of nucleophilicity scales. A linear correlation (r(2) = 0.993) between the empirical electrophilicity parameters E and the reduction potentials in acetonitrile (E = 14.091E degrees (red) - 0.279) covering a range of 1.64 V (or 158 kJ mol(-)(1)) has been observed. For a large number of nucleophiles, it has been demonstrated that the observed activation free energies of the electrophile-nucleophile combinations are 61-195 kJ mol(-)(1) smaller than the free energy change of electron transfer from nucleophile to electrophile, which definitely excludes outer-sphere electron transfer occurring during these reactions.

Journal Article↗
PubMed2003

How nucleophilic are diazo compounds?

The kinetics of the reactions of benzhydryl cations with eight diazo compounds 1 a-g were investigated photometrically in dichloromethane. The nucleophilicity parameters N and slope parameters s of these diazo compounds were derived from the equation log k (20 degrees C)=s (E+N) and compared with the nucleophilicities of other pi systems (alkenes, arenes, silyl enol ethers, silyl ketene acetals). It is shown that the nucleophilic reactivities of diazo compounds cover more than ten orders of magnitude, being comparable to that of styrene on the low reactivity end and to that of enamines on the high reactivity end. The rate-determining step of these reactions is the electrophilic attack at the diazo-carbon atom to yield diazonium ions, which rapidly lose nitrogen.

Journal Article↗
PubMed2003

Electrophilicity parameters for benzylidenemalononitriles.

Kinetics of the reactions of stabilized carbanions (derived from nitroethane, diethyl malonate, ethyl cyanoacetate, ethyl acetoacetate, acetyl acetone) with benzylidenemalononitriles have been determined in dimethyl sulfoxide solution at 20 degrees C. The second-order rate constants are employed to determine the electrophilicity parameters E of the benzylidenemalononitriles according to the correlation equation log k (20 degrees C) = s(E + N). Comparison with literature data shows that this equation allows the semiquantitative prediction of the reactivities of benzylidenemalononitriles toward a wide variety of nucleophiles, including carbanions, enamines, amines, water, and hydroxide.

Journal Article↗
PubMed2003

Structure-nucleophilicity relationships for enamines.

The kinetics of the reactions of benzhydryl cations with 22 enamines, three pyrroles, and three indoles were investigated photometrically in dichloromethane. The nucleophilicity parameters N and slope parameters s of these electron-rich pi-systems were derived from equation log k (20 degrees C)=s(E+N) and compared with the nucleophilicities of other pi-systems (silyl enol ethers, silyl ketene acetals) and carbanions. It is shown that the nucleophilic reactivities of enamines cover more than ten orders of magnitude, comparable to enol ethers on the low reactivity end and to carbanions on the high reactivity end. Since the products of N-attack are thermodynamically less stable than the reactants, the observed rate constants refer to the formation of the carbon bond;carbon bonds. In some cases, equilibrium constants for the formation of iminium ions were measured, which allow one to determine the intrinsic rate constants of these reactions.

Journal Article↗
PubMed2003

How constant are Ritchie's "constant selectivity relationships"? A general reactivity scale for n-, pi-, and sigma-nucleophiles.

The kinetics of 82 reactions of benzhydrylium ions (Ar(2)CH(+)) with n-nucleophiles has been determined at 20 degrees C. Evaluation by the equation log k = s(N + E) delivered the reactivity parameters N and s for 15 n-nucleophiles (water, hydroxide, amines, etc.). All nucleophiles except water (s = 0.89) and (-)SCH(2)CO(2)(-) (s = 0.43) have closely similar slope parameters (0.52 < s < 0.71), indicating that the reactions of most n-nucleophiles approximately follow Ritchie's constant selectivity relationship (s = constant). The different slope parameter for water is recognized as the main reason for the deviations from the Ritchie relationship reported in 1986. Correlation analysis of the rate constants for the reactions of benzhydrylium ions with the n-nucleophiles (except H(2)O) on the basis of Ritchie's equation log k = N(+) + log k(0) yields a statistically validated set of N(+) parameters for Ritchie-type nucleophiles and log k(0) parameters for benzhydrylium ions. The N and s parameters of the n-nucleophiles derived from their reactions with benzhydrylium ions were combined with literature data for the reactions of these nucleophiles with other carbocations to yield electrophilicity parameters E for tritylium, tropylium, and xanthylium ions. While the E parameters for tropylium and xanthylium ions appear to be generally applicable, it is demonstrated that the E parameters of tritylium ions can be used to predict reactivities toward n-nucleophiles as well as hydride transfer rate constants but not rates for the reactions of tritylium ions with pi-nucleophiles. It is now possible to merge the large data sets determined by Ritchie and others with our kinetic data and present a nucleophilicity scale comprising n- (e.g., amines), pi- (e.g., alkenes and arenes), and sigma-nucleophiles (e.g., hydrides).

Journal Article↗
PubMed2003

Pi-nucleophilicity in carbon-carbon bond-forming reactions.

Which electrophiles react with which nucleophiles? The correlation log k(20 degrees Celsius) = s(E + N), in which electrophiles (carbocations, metal-pi-complexes, diazonium ions) are characterized by one (E) and nucleophiles are characterized by two parameters (N, s), proved to be applicable for a wide variety of electrophile-nucleophile combinations. Since the introduction of this correlation in 1994 (Angew. Chem., Int. Ed. Engl. 1994, 33, 938-957), numerous new reagents have been characterized, and in 2001 (J. Am. Chem. Soc. 2001, 123, 9500-9512), a new method of parametrization was proposed that facilitates a continuous extension of the data sets without the need for reparametrization of existing data. This Account adjusts the N and s parameters of all presently characterized pi-nucleophiles (arenes, alkenes, organometallics) to the new parametrization and illustrates how to employ the resulting reactivity scales for analyzing synthetic and mechanistic problems in organic and macromolecular chemistry. Predictions of absolute rate constants, inter- and intramolecular selectivities, and analyses of reaction mechanisms are discussed. We outline how new compounds can be added to the scales and present our view on the scope and limitations of this approach to polar organic reactivity.

Journal Article↗