Biomedical subjects

Hirofumi Kan

Publications and source records attributed to Hirofumi Kan.

4 recordsLinked to original sources

PubMed2005

Effective bandwidth reduction for a high-power laser-diode array by an external-cavity technique.

bandwidth of a high-power laser-diode array was effectively suppressed by use of an off-axis external-cavity technique. The external cavity consisted of a beam-transformation system and a pair of off-axis volume Bragg gratings. During operation at a drive current of 40 A, we reduced the bandwidth's full width at half-maximum from 3.3 to 0.24 nm (14-fold reduction) and achieved an output power of 20 W, or as much as 87% of the power radiated by a free-running laser-diode array without an external cavity.

Journal Article↗

PubMed2004

Effective suppression of beam divergence for a high-power laser diode bar by an external-cavity technique.

We describe effective suppression of beam divergence for a high-power laser diode bar by use of an external-cavity technique. Nineteen off-axis external-cavity laser diodes of the high-power laser diode are formed by feedback with a stripe mirror. At three times the threshold current, the diverging angle (1/e2) of the external-cavity laser diode bar is reduced to 1.5 degrees from 6.6 degrees (free running) with 14.1-W peak output power and 70.4% of the radiated power of the free-running state without the external cavity. This technique effectively improves the beam quality of the high-power laser diode bar.

Journal Article↗

PubMed2004

Jet-type, water-cooled heat sink that yields 255-W continuous-wave laser output at 808 nm from a 1-cm laser diode bar.

A newly designed jet-type, water-cooled heat sink (the funryu heat sink, meaning fountain flow in Japanese) yielded 255-W cw laser output at 808 nm from a 1-cm bar made from InGaAsP/InGaP quantum-well active layers with a 67% fill factor [70 quantum-well laser diode (LD) array along the 1-cm bar]. A funryu heat sink measuring 1.1 mm in thickness gave the LD 0.25 degrees C/W thermal resistance, one of the lowest values achieved with a 1-cm LD bar. Over a short period of operation, the device reached a maximum cw power of 255 W. To the best of our knowledge, this is the highest power ever achieved in 808-nm LD operation. In the future, the funryu heat sink may be capable of 80-W cw operation over an extended lifetime of several thousand hours.

Journal Article↗

PubMed2003

360-W average power operation with a single-stage diode-pumped Nd:YAG amplifier at a 1-kHz repetition rate.

We report a high-average-power laser-diode-pumped Nd:YAG master oscillator power amplifier system that has a minimum number of elements in the single multipass zigzag-slab amplifier stage and is used to pump a high-peak-power and high-average-power Ti:sapphire laser system. This phase-conjugated system produces an average power of 362 W at 1 kHz in a 30-ns pulse with an optical-to-optical conversion efficiency of 14%. With an external KTP doubler this system generates 132 W of green average output power at 1 kHz with a conversion efficiency of 60% when pumped at a power level of 222 W. To the best of our knowledge these results represent the highest average output power at both infrared and green wavelengths achieved in a single amplifier stage.

Journal Article↗