Biomedical subjects

Hirokazu Kaji

Publications and source records attributed to Hirokazu Kaji.

10 recordsLinked to original sources

PubMed2006

Electrodeposition of anchored polypyrrole film on microelectrodes and stimulation of cultured cardiac myocytes.

The electrically conducting polymer polypyrrole (PPy) was electrochemically deposited onto Pt microelectrodes on a polyimide (PI) substrate. Pre-modification of the PI surface with a self-assembled monolayer of octadecyltrichlorosilane-induced anisotropic lateral growth of PPy along the PI surface and enhanced adhesive strength of the PPy film. The lateral growth of PPy film around the electrode anchored the whole film to the substrate. External stimulation of cultured cardiac myocytes was carried out using the PPy-coated microelectrode. The myocytes on the microelectrode substrate were electrically conjugated to form a sheet, and showed synchronized beating upon stimulation. The threshold charge for effective stimulation of a 0.8 cm(2) sheet of myocytes was around 0.2 microC, roughly corresponding to a membrane depolarization of 250 mV.

Animals↗

PubMed2006

Patterning cellular motility using an electrochemical technique and a geometrically confined environment.

We describe herein a method for controlling the pattern of permissible cell migration and proliferation on a substrate in time and space. Using this method, a confluent monolayer of cells that is confined within a defined region is released into a neighboring region. Incorporated into the method is an electrochemical technique that uses a scanning microelectrode to draw regions on the surface of the system that thereafter can support cell migration and growth. The supporting glass substrate is patterned with regions of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer that are not affected by the electrochemical treatment and also robustly resist cellular overgrowth as well as regions that can be individually switched when electrochemically treated from cell repellent to cell adhering. It is therefore possible to strictly define the areas into which cells can migrate. We found that HeLa cells migrate more rapidly as the width of cell-adhering lanes increases until a width of ca. 50 microm is reached, at which point the migration rate is roughly constant. We also designed a drug assay using our cell migration technique. The technique allows for cell migration only into defined region(s) and therefore may become an important tool for evaluating the biological activity of potential drugs because drug activity and cell motility often directly correlate.

Journal Article↗

PubMed2006

On-demand patterning of protein matrixes inside a microfluidic device.

On-demand immobilization of proteins at specific locations in a microfluidic device would advance many types of bioassays. We describe a strategy to create a patterned surface within a microfluidic channel by electrochemical means, which enables site-specific immobilization of protein matrixes and cells under physiological conditions, even after the device is fully assembled. By locally generating hypobromous acid at a microelectrode in the microchannel, the heparin-coated channel surface rapidly switches from antibiofouling to protein-adhering. Since this transformation allows compartmentalizing of multiple types of antibodies into distinct regions throughout the single microchannel, simultaneous assay of two kinds of complementary proteins was possible. This patterning procedure can be applied to conventional microfluidic devices since it requires only some electrodes and a voltage source (1.7 V, DC).

Animals↗

PubMed2005

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays.

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.

Cell Adhesion↗

PubMed2005

Patterning the surface cytophobicity of an albumin-physisorbed substrate by electrochemical means.

Spatiotemporal control of surface properties under physiological conditions such as those found in culture media is an important technique in fundamental cell biology, tissue engineering, and cell-based bioelectronics. To this end, we have developed a mild, wet cellular micropatterning technique. The principle of the technique is based on the fact that the cell-repellant property of the albumin-coated substrate rapidly switches to cell-adhesive upon exposure to the reactive oxidizing agent, electrochemically generated hypobromous acid. Herein, we report the effect of the hypobromous acid on serum albumin physisorbed on a hydrophobic substrate. It was found that albumin molecules detach from the substrate by application of the oxidizing agent, resulting in exposure of the underlying hydrophobic surface to the liquid phase. The adsorption of extracellular matrix proteins such as fibronectin onto the hydrophobic surface induces cell adhesion and growth.

Adsorption↗

PubMed2004

In situ control of cellular growth and migration on substrates using microelectrodes.

We describe an electrochemical method to direct the growth and migration of mammalian cells on a substrate during cultivation in situ. Exposing the albumin-coated substrate to an oxidizing agent, hypobromous acid, electrochemically generated at the tip of the scanning microelectrode, locally switched the substrate from cytophobic to cell-adhesive. This transformation generated the formation of cellular micropatterns. Since the concentration of the oxidizing agent required for the surface processing did not cause significant damage to the cell cultures, we were able to direct in situ cellular proliferation and migration by drawing adhesive micropatterns over the preexisting cellular pattern.

Journal Article↗

PubMed2004

Microelectrochemical approach to induce local cell adhesion and growth on substrates.

The nature of an albumin-coated substrate that blocks protein adsorption and cell adhesion was rapidly switched to cell-adhesive by exposure to an oxidizing agent such as HBrO. This finding has enabled cellular pattern drawing even on a single-cell level by closely scanning a microelectrode above the substrate and electrochemically producing the agent at the tip of the electrode. The present microelectrochemical cell patterning is applicable even for a previously cell-patterned substrate and for a grooved substrate. These unique technical features will have impacts on a variety of cell-based studies that require the analysis of heterotypic cell-cell interactions and cellular arrangement on an uneven surface such as semiconductor devices.

Bromates↗

PubMed2003

Localized chemical stimulation to micropatterned cells using multiple laminar fluid flows.

Micropatterns of the electrically conjugating cardiomyocytes were prepared on a single cell level by microcontact printing (microCP), and the localized chemical stimulations were applied to the cellular pattern using multiple laminar flows. The locally delivered 1-octanol inactivated part of the myocyte patterns, while the other areas retained the activity showing spontaneous and synchronous pulsatility. Since both the cells and flows were well defined as micropatterns and each integrated on a chip, the obtained results simply demonstrate the cellular responses in a single-cell network.

1-Octanol↗

PubMed2003

Intracellular Ca2+ imaging for micropatterned cardiac myocytes.

The patterning of cardiac myocytes on a micron scale ( approximately 5 microm) was achieved by microcontact printing of fibronectin onto a hydrophobically pretreated glass substrate. The patterned cardiac myocytes conjugated with each other by forming a gap junction, as judged from the synchronized Ca(2+) transition over the pattern, and thus simultaneously contracted. The dynamic change of the Ca(2+) concentration within the patterned tissue was analyzed quantitatively during successive contraction and relaxation using a Nipkow-type high-speed confocal microscope.

Calcium↗

PubMed2003

Pharmacological characterization of micropatterned cardiac myocytes.

The cardiac myocytes patterned on a single cell level were prepared by microcontact printing, and the response to chemical stimuli was studied using confocal fluorescent Ca(2+) imaging. The patterned myocytes were found to conjugate by forming gap junction. It was confirmed for the patterned myocytes that gap junction communication was reversibly inhibited by 1-octanol, but activated by caffeine. Localized stimulation with chemicals was also attempted using a microinjection system for the myocyte patterns formed by single cell alignment. This research was carried out with the objective of developing a bioassay system based on a cellular network.

1-Octanol↗