PubMed Health⌕ Search

Biomedical subjects

Hiroshi Imahori

Publications and source records attributed to Hiroshi Imahori.

At least 19 recordsLinked to original sources

Synthesis, structures, and properties of meso-phosphorylporphyrins: self-organization through P-oxo-zinc coordination.

The synthesis, structures, and optical and electrochemical properties of meso-phosphorylporphyrins are described. The copper-catalyzed carbon-phosphorus cross-coupling reaction of a meso-iodoporphyrin with di-n-butyl phosphite and diphenylphosphane oxide has proved to be an efficient and general method for the synthesis of meso-phosphorylporphyrins. Zinc phosphorylporphyrins thus obtained readily undergo self-organization through P-oxo-Zn coordination to form noncovalently linked, cofacial porphyrin dimers or linear oligomers, which have been characterized by spectroscopic methods and X-ray crystallographic analyses. In toluene, CH(2)Cl(2), and CHCl(3), the zinc phosphorylporphyrins exist mostly as dimers or monomers, depending on their concentrations, the temperature, and the presence of additives. The self-association constants for dimerization in toluene have been determined by UV/Vis absorption titration measurements. The meso-diphenylphosphorylporphyrin dimer displays excitonic coupling of the Soret band with a splitting energy of 940 cm(-1). Fluorescence lifetimes of the zinc phosphorylporphyrins have been found to be affected only slightly by the concentration of the solution, and by the addition of triphenylphosphane oxide, suggesting that the effect of dimerization on their photodynamics in the S(1) state is negligible. On the other hand, the effect of dimerization is clearly reflected in their electrochemical oxidation processes, as the initially produced radical cations are efficiently delocalized over the two porphyrin rings. These findings demonstrate the potential utility of meso-phosphorylporphyrins as new models for the special pair in photosynthesis and as new building blocks for porphyrin-based supramolecular materials.

Crystallography, X-Ray↗

Comparison of electrode structures and photovoltaic properties of porphyrin-sensitized solar cells with TiO2 and Nb, Ge, Zr-added TiO2 composite electrodes.

Electrode structures and photovoltaic properties of porphyrin-sensitized solar cells with TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were examined to disclose the effects of partial substitution of Ti atom by the other metals in the composite electrodes. The TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were prepared by sol-gel process using laurylamine hydrochloride as a template for the formation of micellar precursors yielding well-defined mesoporous nanocrystalline structures, as in the cases of the formation of silica and titania tubules and nanoparticles by the templating mechanism. The TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were characterized by transmission electron microscopy, BET surface area analysis, X-ray diffraction analysis, Raman spectroscopy, and impedance measurements. The TiO2 anatase nanocrystalline structure is retained after doping a small amount (5 mol %) of Nb, Ge, or Zr into the TiO2 structure, suggesting the homogeneous distribution of the doped metals with replacing Ti atom by the doped metal. The power conversion efficiency of the porphyrin-sensitized solar cells increases in the order Zr-added TiO2 (0.8%) < Nb-added TiO2 (1.2%) < TiO2 (2.0%) < Ge-added TiO2 cells (2.4%) under the same conditions. The improvement of cell performance of the Ge-added TiO2 cell results from the negative shift of the conduction band of the Ge-added TiO2 electrode. The Ge-added TiO2 cell exhibited a maximum power conversion efficiency of 3.5% when the porphyrin was adsorbed onto the surface of the Ge-added TiO2 electrode with a thickness of 4 microm in MeOH for 1 h.

Journal Article↗

Synthesis of a phosphorus-containing hybrid porphyrin.

A phosphorus-containing hybrid porphyrin was successfully prepared via the BF3-promoted dehydrative condensation between sigma4-phosphatripyrrane and 2,5-bis[hydroxy(phenyl)methyl]thiophene. The NMR and UV-vis absorption spectra, electrochemical measurements, and DFT calculations revealed that the sigma3-P,N2,S-hybrid porphyrin exhibits high aromaticity as an 18pi-electron system in terms of both geometric and magnetic criteria. [structure: see text]

Electrochemistry↗

External electric field effects on absorption and fluorescence spectra of a fullerene derivative and its mixture with zinc-tetraphenylporphyrin doped in a PMMA film.

Electroabsorption and electrofluorescence spectra of a fullerene derivative, C60(C18)2, and its mixture with zinc-tetraphenylporphyrin (ZnTPP) have been measured by using electric field modulation spectroscopy. The change in dipole moment is significant in the electroabsorption spectra both of C60(C18)2 and of a complex composed of C60(C18)2 and ZnTPP, indicating that the excited states both of C60(C18)2 and of a complex between C60(C18)2 and ZnTPP have a large charge-transfer character. The fluorescence quantum yield of C60(C18)2 decreases in the presence of an electric field, which probably arises from the field-induced acceleration of the intramolecular nonradiative process of C60(C18)2 in the fluorescent state. In a mixture between ZnTPP and C60(C18)2, electrofluorescence spectra show the field-induced enhancement for the fluorescence of ZnTPP and the field-induced de-enhancement for the fluorescence both of C60(C18)2 and of the complex between ZnTPP and C60(C18)2. A theoretical analysis clearly shows that the field-induced enhancement of the ZnTPP fluorescence in a mixture results from the field-induced deceleration of the rate of the electron transfer from the excited ZnTPP to C60(C18)2. The standard free energy gap for the photoinduced electron-transfer process is estimated based on the theoretical simulation of the field-dependent fluorescence intensity.

Journal Article↗

Synthesis and photophysical properties of electron-rich perylenediimide-fullerene dyad.

An electron-rich perylenediimide-C60 dyad has been prepared to explore a new type of donor-acceptor system. Time-resolved absorption measurements in benzonitrile revealed unambiguous evidence for the formation of a charge-separated state consisting of perylene diimide radical cation and C60 radical anion via photoinduced electron transfer, showing a new class of artificial photosynthetic models in terms of charge separation.

Journal Article↗

Phosphorus-containing hybrid calixphyrins: promising mixed-donor ligands for visible and efficient palladium catalysts.

Phosphorus-sulfur-containing hybrid calixphyrins were prepared by the BF3-promoted dehydrative condensation between sigma4-2,5-bis[(pyrrol-2-yl)methyl]phosphole and 2,5-bis[hydroxy(phenyl)methyl]thiophene. X-ray crystallographic analysis of the Pd-P,N2,S-hybrid calixphyrin complex revealed that the Pd center was coordinated by the four heteroatoms to adopt a distorted square planar geometry. The Pd complex, displaying a characteristic reddish purple color in solution, catalyzed the Heck reaction of bromoarenes with n-butyl acrylate with high efficiency at elevated temperatures.

Journal Article↗

Electrospray mass spectrometry analysis of dendritic branches bearing peripheral fullerene subunits.

The electrospray mass spectrometric characterization of neutral dendrons with a carboxylic acid function or a t-butyl ester moiety at the central point and up to eight peripheral C60 subunits has been performed and is described in detail. Molecules bearing a carboxylic acid group at the center turned out to be preferentially ionized by deprotonation, whereas those with a t-butyl ester head group were ionized by reduction of the C60 units in the infusion capillary of the electrospray source.

Carboxylic Acids↗

A convenient method for the synthesis of 2,5-difunctionalized phospholes bearing ester groups.

Symmetrically and unsymmetrically 2,5-difunctionalized phospholes bearing ester groups were prepared in a one-pot procedure from the corresponding diynes and dichloro(phenyl)phosphine via titanacyclopentadienes. The observed optical properties of the functionalized phospholes show that the pi-conjugative push-pull interaction between the 2- and 5-substituents plays an important role in controlling the light-emitting efficiency.

Journal Article↗

A photoelectrochemical device with a nanostructured SnO2 electrode modified with composite clusters of porphyrin-modified silica nanoparticle and fullerene.

A silica nanoparticle has been successfully employed as a nanoscaffold to self-organize porphyrin and C60 molecules on a nanostructured SnO2 electrode. The quenching of the porphyrin excited singlet state on the silica nanoparticle is suppressed significantly, showing that silica nanoparticles are promising scaffolds for organizing photoactive molecules three-dimensionally in nanometer scale. Marked enhancement of the photocurrent generation was achieved in the present system compared with the reference system, where a gold core was employed as a scaffold of porphyrins instead of a silica nanoparticle. The rather small incident photon-to-current efficiency relative to a similar photoelectrochemical device using a silica microparticle may result from poor electron and hole mobility in the composite film due to poor connection between the composite clusters of a porphyrin-modified silica nanoparticle and C60 in micrometer scale.

Journal Article↗

Structure and photoelectrochemical properties of phthalocyanine and perylene diimide composite clusters deposited electrophoretically on nanostructured SnO2 electrodes.

Clusters of phthalocyanine and phthalocyanine-perylene diimide have been prepared and electrophoretically deposited on nanostructured SnO2 electrodes. The structure and photoelectrochemical properties of the clusters have been investigated by using UV-visible absorption, dynamic light scattering (DLS), atomic force microscopy (AFM), transmission electron microscopy (TEM), and photoelectrochemical and photodynamical measurements. Enhancement of the photocurrent generation efficiency in the composite system has been achieved relative to that in the phthalocyanine reference system without the perylene diimide. Such information will be valuable for the design of molecular photoelectrochemical devices that exhibit efficient photocurrent generation.

Journal Article↗

Self-organization of porphyrins and fullerenes for molecular photoelectrochemical devices.

We have constructed a variety of molecular assemblies of porphyrin as a donor and fullerene as an acceptor on electrodes for molecular photoelectrochemical devices. Highly efficient energy- and electron-transfer processes have been realized at gold electrodes modified with self-assembled monolayers of porphyrin- or fullerene linked systems mimicking light-harvesting and charge separation in bacterial photosynthesis. Highly ordered organization of porphyrins and fullerenes has also been achieved using step-by-step self-assembly of porphyrin and fullerene units by association with gold nanoparticles or dendrimers on tin oxide electrodes, which exhibit high power-conversion efficiency of up to 1.5%. These results will provide valuable information on the design of donor-acceptor type molecular assemblies that can be tailored to construct highly efficient organic solar cells.

Electrodes↗

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics.

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.

Journal Article↗

Morphological and spectroscopic properties of thin films of self-assembling amphiphilic porphyrins on a hydrophilic surface as revealed by scanning near-field optical microscopy.

We fabricated porphyrin thin films on mica surfaces from acidic aqueous solutions of the preorganized H-aggregates of amphiphilic porphyrins by the simple spin-coating method. The morphological and spectroscopic properties of the film were investigated by scanning near-field optical microscopy. The results obtained in this study demonstrate that the preorganized structure in solution can be transferred as a thin film with a thickness of the monolayer level without losing their substantial structure and photophysical properties.

Journal Article↗

Hydrogen bonding effects on the surface structure and photoelectrochemical properties of nanostructured SnO2 electrodes modified with porphyrin and fullerene composites.

Hydrogen bonding effects on surface structure, photophysical properties, and photoelectrochemistry have been examined in a mixed film of porphyrin and fullerene composites with and without hydrogen bonding on indium tin oxide and nanostructured SnO2 electrodes. The nanostructured SnO2 electrodes modified with the mixed films of porphyrin and fullerene composites with hydrogen bonding exhibited efficient photocurrent generation compared to the reference systems without hydrogen bonding. Atomic force microscopy, infrared reflection absorption, and ultraviolet-visible absorption spectroscopies and time-resolved fluorescence lifetime and transient absorption spectroscopic measurements disclosed the relationship between the surface structure and photophysical and photoelectrochemical properties relating to the formation of hydrogen bonding between the porphyrins and/or the C60 moieties in the films on the electrode surface. These results show that hydrogen bonding is a highly promising methodology for the fabrication of donor and acceptor composites on nanostructured semiconducting electrodes, which exhibit high photoelectrochemical properties.

Electrochemistry↗

Primary charge-recombination in an artificial photosynthetic reaction center.

Photoinduced primary charge-separation and charge-recombination are characterized by a combination of time-resolved optical and EPR measurements of a fullerene-porphyrin-linked triad that undergoes fast, stepwise charge-separation processes. The electronic coupling for the energy-wasting charge recombination is evaluated from the singlet-triplet electronic energy gap in the short-lived, primary charge-separated state. The electronic coupling is found to be smaller by approximately 40% than that for the primary charge-separation. This inhibition of the electronic interaction for the charge-recombination to excited triplet state largely results from a symmetry-broken electronic structure modulated by configuration interaction between 3(b1u,b3g) and 3(au, b3g) electronic states of the free-base porphyrin.

Electrons↗

Photoinduced electron transfer in self-assembled monolayers of porphyrin-fullerene dyads on ITO.

Two porphyrin-fullerene dyads were synthesized to form self-assembled monolayers (SAMs) on indium-tin oxide (ITO) electrode, with either ITO-porphyrin-fullerene or ITO-fullerene-porphyrin orientations. The dyads contain two linkers for connecting the porphyrin and fullerene moieties and enforcing them essentially to similar geometries of the donor-acceptor pair, and two linkers to ensure the attachment of the dyads to the ITO surface with two desired opposite orientations. The transient photovoltage responses (Maxwell displacement charge) were measured for the dyad films covered by insulating LB films, thus ensuring that the dyads interact only with the ITO electrode. The direction of the electron transfer was from the photoexcited dyad to ITO independent of the dyad orientation. The response amplitude for the ITO-fullerene-porphyrin structure, where the primary intramolecular electron-transfer direction coincides with the direction of the final electron transfer from the dyad to ITO, was 25 times stronger than that for the opposite ITO-porphyrin-fullerene orientation of the dyad. Static photocurrent measurements in a liquid electrochemical cell, however, show only a minor orientation effect, indicating that the photocurrent generation is controlled by the processes at the SAM-liquid interface.

Electrodes↗

Photoinduced electron transfer in Langmuir-Blodgett monolayers of porphyrin-fullerene dyads.

A series of electron donor-acceptor (DA) dyads, composed of a porphyrin donor and a fullerene acceptor covalently linked with two molecular chains, were used to fabricate solid molecular films with the Langmuir-Blodgett (LB) technique. By means of the LB technique, the DA molecules can be oriented perpendicular to the plane of the substrate. In DHD6ee and its zinc derivative hydrophilic groups are attached to the phenyl moieties in the porphyrin end of the molecule; while in the other three dyads, TBD6a, TBD6hp, and TBD4hp, the hydrophilic groups are in the fullerene end of the molecule. This makes it possible to alternate the orientation of the molecules in two opposite directions with respect to the air-water interface and to fabricate molecular assemblies in which the direction of the primary photoinduced vectorial electron transfer can be controlled both by the deposition direction of the LB monolayer and by the selection of the used DA molecule. This was proved by the time-resolved Maxwell displacement charge measurements. The spectroscopic properties of the DA films were studied with the steady-state absorption and fluorescence methods. In addition, the time correlated single photon counting technique was used to determine the fluorescence properties of the dyad films.

Journal Article↗