Biomedical subjects

Hiroyuki Akama

Publications and source records attributed to Hiroyuki Akama.

7 recordsLinked to original sources

PubMed2005

Forceful large-scale expression of "problematic" membrane proteins.

We developed an Escherichia coli expression system for overproduction of a highly toxic membrane protein that is impossible to overexpress by traditionally used approaches. The method is based on combination of the genetic modifications of a bicistronic expression plasmid, stabilization of a synthesized protein, and selection of a compatible expression host. This enabled us to enhance the expression level of a toxic membrane protein 30-50 times compared with expression in the native state and to obtain 3-5mg of a highly purified functionally active protein per liter of culture. We describe the method for the amplified expression of membrane proteins, using the Pseudomonas aeruginosa multidrug resistance protein, MexY, as an example. The amplified MexY was correctly folded in the cytoplasmic membrane of the E. coli without forming inclusion bodies. This method can be applicable to the large-scale expression of the other problematic membrane proteins that are otherwise extremely difficult to overproduce.

Bacterial Outer Membrane Proteins↗

PubMed2005

Multidrug transporter MexB of Pseudomonas aeruginosa: overexpression, purification, and initial structural characterization.

Structural and functional characterization of the multidrug transporter, MexB, of Pseudomonas aeruginosa is significantly restricted due to a low yield of approximately 0.1 mg/L of culture from natural sources. To facilitate structural studies of this medically important transporter protein, we developed a large-scale system for expression of the genetically engineered recombinant, MexB, in the Escherichia coli cell. Using the system, the eventual yield of MexB attained was about 10mg/L of culture. The optimized purification protocol in the presence of dodecyl beta-D-maltoside allowed isolation of highly homogeneous MexB. The oligomeric state of the protein in detergent solution has been characterized to verify that the native state of the purified protein has been preserved. The molecular mass of the protein-detergent complex was found to be 380-450kDa. The MexB-dodecyl beta-d-maltoside mass ratio was determined to be 1.8 +/- 0.05. Taking into account the monomeric MexB molecular mass deduced from its amino acid sequence (112.8 kDa), we concluded that the purified MexB exists as the homotrimer in the surfactant solution. Circular dichroism analysis of MexB showed dominance of the alpha-helix structures. High yield, homogeneity, and stability of MexB position it as a good candidate for structural and functional characterization.

Bacterial Outer Membrane Proteins↗

PubMed2004

Preliminary crystallographic analysis of the antibiotic discharge outer membrane lipoprotein OprM of Pseudomonas aeruginosa with an exceptionally long unit cell and complex lattice structure.

Crystals of the drug-discharge outer membrane protein OprM (MW = 50.9 kDa) of the MexAB-OprM multidrug transporter of Pseudomonas aeruginosa have been grown at 293 K in the presence of 2-methyl-2,4-propanediol and a combination of surfactants. The crystal belonged to space group R32, with unit-cell parameters a = b = 85.43, c = 1044.3 A. Diffraction data for OprM were obtained using the undulator synchrotron-radiation beamline at SPring-8 (BL44XU, Osaka University), which allowed an extra-long specimen-to-detector distance with a wide detector area. The crystal diffracted to 2.56 A resolution using 0.9 A X-rays from the synchrotron-radiation source. A heavy-atom derivative for isomorphous replacement phasing was obtained using iridium chloride.

Bacterial Outer Membrane Proteins↗

PubMed2004

Crystal structure of the drug discharge outer membrane protein, OprM, of Pseudomonas aeruginosa: dual modes of membrane anchoring and occluded cavity end.

The OprM lipoprotein of Pseudomonas aeruginosa is a member of the MexAB-OprM xenobiotic-antibiotic transporter subunits that is assumed to serve as the drug discharge duct across the outer membrane. The channel structure must differ from that of the porin-type open pore because the protein facilitates the exit of antibiotics but not the entry. For better understanding of the structure-function linkage of this important pump subunit, we studied the x-ray crystallographic structure of OprM at the 2.56-angstroms resolution. The overall structure exhibited trimeric assembly of the OprM monomer that consisted mainly of two domains: the membrane-anchoring beta-barrel and the cavity-forming alpha-barrel. OprM anchors the outer membrane by two modes of membrane insertions. One is via the covalently attached NH(2)-terminal fatty acids and the other is the beta-barrel structure consensus on the outer membrane-spanning proteins. The beta-barrel had a pore opening with a diameter of about 6-8 angstroms, which is not large enough to accommodate the exit of any antibiotics. The periplasmic alpha-barrel was about 100 angstroms long formed mainly by a bundle of alpha-helices that formed a solvent-filled cavity of about 25,000 angstroms(3). The proximal end of the cavity was tightly sealed, thereby not permitting the entry of any molecule. The result of this structure was that the resting state of OprM had a small outer membrane pore and a tightly closed periplasmic end, which sounds plausible because the protein should not allow free access of antibiotics. However, these observations raised another unsolved problem about the mechanism of opening of the OprM cavity ends. The crystal structure offers possible mechanisms of pore opening and pump assembly.

Anti-Bacterial Agents↗

PubMed2004

Role of the membrane fusion protein in the assembly of resistance-nodulation-cell division multidrug efflux pump in Pseudomonas aeruginosa.

The tripartite xenobiotic-antibiotic transporter of Pseudomonas aeruginosa consists of the inner membrane transporter (e.g., MexB, MexY), the periplasmic membrane-fusion-protein (e.g., MexA, MexX), and the outer membrane channel protein (e.g., OprM). These subunits were assumed to assemble into a transporter unit during export of the substrates. However, subunit interaction and their specificity in native form remained to be elucidated. To address these important questions, we analyzed the role of the individual subunits for the assembly of MexAB-OprM by pull-down assay tagging only one of the subunits. We found stable MexA-MexB-OprM complex without chemical cross-linking that withstand all purification procedures. Results of bi-partite interactions analysis showed tight association between MexA and OprM in the absence of MexB, whereas the expression systems lacking MexA failed to co-purify MexB or OprM. None of the heterologous subunit combinations such as MexA+MexY(his)+OprM and MexX+MexB(his)+OprM showed interaction. These results implied that the membrane fusion protein is central to the tripartite xenobiotic transporter assembly.

Bacterial Outer Membrane Proteins↗

PubMed2004

Crystal structure of the membrane fusion protein, MexA, of the multidrug transporter in Pseudomonas aeruginosa.

The MexAB-OprM efflux pump of Pseudomonas aeruginosa is central to multidrug resistance of this organism, which infects immunocompromised hospital patients. The MexA, MexB, and OprM subunits were assumed to function as the membrane fusion protein, the body of the transporter, and the outer membrane channel protein, respectively. For better understanding of this important xenobiotic transporter, we show the x-ray crystallographic structure of MexA at a resolution of 2.40 A. The global MexA structure showed unforeseen new features with a spiral assembly of six and seven protomers that were joined together at one end by a pseudo 2-fold image. The protomer showed a new protein structure with a tandem arrangement consisting of at least three domains and presumably one more. The rod domain had a long hairpin of twisted coiled-coil that extended to one end. The second domain adjacent to the rod alpha-helical domain was globular and constructed by a cluster of eight short beta-sheets. The third domain located distal to the alpha-helical rod was globular and composed of seven short beta-sheets and one short alpha-helix. The 13-mer was shaped like a woven rattan cylinder with a large internal tubular space and widely opened flared ends. The 6-mer and 7-mer had a funnel-like structure consisting of a tubular rod at one side and a widely opened flared funnel top at the other side. Based on these results, we constructed a model of the MexAB-OprM pump assembly. The three pairs of MexA dimers interacted with the periplasmic alpha-barrel domain of OprM via the alpha-helical hairpin, the second domain interacted with both MexB and OprM at their contact site, and the third and disordered domains probably interacted with the distal domain of MexB. In this fashion, the MexA subunit connected MexB and OprM, indicating that MexA is the membrane bridge protein.

Bacterial Outer Membrane Proteins↗

PubMed2003

Mutations affecting DNA-binding activity of the MexR repressor of mexR-mexA-mexB-oprM operon expression.

We have isolated 25 MexR mutants that retained their dimerizing ability but were unable to bind mexOP DNA. Surprisingly, 20 mutations were located in the hydrophobic core region at alpha4, W1, alpha2, alpha3, and beta2, and only 3 were in positively charged residues. These results verified that DNA binding is mediated by distinct regions of MexR and showed the importance of the hydrophobic core region of the DNA-binding domain.

Aztreonam↗