PubMed Health⌕ Search

Biomedical subjects

Hisanori Shinohara

Publications and source records attributed to Hisanori Shinohara.

At least 19 recordsLinked to original sources

Enhanced photoluminescence from very thin double-wall carbon nanotubes synthesized by the zeolite-CCVD method.

Photoluminescence (PL) from purified (>90%) double-wall carbon nanotubes (DWNTs), which have been synthesized by zeolite catalyst-supported chemical vapor deposition (zeolite-CCVD), of very small diameters (0.8-nm average inner tube) is reported. The PL contour mappings for various ratios (1-90%) of double- versus single-wall carbon nanotubes by thermal oxidation have enabled us to unambiguously identify the chirality of inner tubes for the DWNTs synthesized. After the extensive high-temperature oxidation at 700 degrees C, high-purity (>90%) DWNTs of approximately 0.8 nm inner diameter are obtained, and most of these correspond to the DWNTs having inner tubes with chiralities of (7,5), (7,6), and (9,4).

Journal Article↗

High-resolution analysis of (Sc3C2)@ C80 metallofullerene by third generation synchrotron radiation X-ray powder diffraction.

The X-ray structure of Sc(3)C(82) is redetermined by the MEM/Rietveld method by using synchrotron radiation powder data at SPring-8, where the C(2) encapsulated structure available to discuss the Sc-Sc interatomic distances has been determined. The encapsulated three scandium atoms form a triangle shape. A spherical charge distribution originating from the C(2) molecule is located at the center of the triangle. Interatomic distances between Sc and Sc are 3.61(3) A in the triangle. The distance between Sc and the center of the C(2) molecule is 2.07(1) A.

Journal Article↗

C64H4: production, isolation, and structural characterizations of a stable unconventional fulleride.

Unconventional fullerenes are those smaller than C(60) or those intermediate between C(60) and C(70), which are not stable in structure as none of the unconventional fullerene isomers satisfying the "isolated-pentagon-rule" (IPR). Below we report the synthesis of a stable unconventional fullerene derivative C(64)H(4) by introducing methane in the fullerene productions with the normal Krätschmer-Huffman method. We also applied various spectroscopic measurements such as mass spectrometry, (13)C NMR, IR, UV-vis absorption spectrometry, etc. to characterize the structural and electronic properties of this molecule, revealing an unprecedented fullerene cage with a triplet of directly fused pentagons in the framework of C(64)H(4). Four hydrogen atoms are added to the carbons at vertexes of fused pentagons to allow the bond angles at these sites close to the sp(3) tetrahedral angle, which essentially release the sp(2) bond strains on the abutting-pentagon sites of C(64). Ab initio calculations were performed to explore the electronic property and simulate the (13)C NMR and IR spectra of this fulleride, which reproduced well the experimental results and confirmed the structural assignment of the C(64)H(4).

Journal Article↗

High-yield synthesis of single-wall carbon nanotubes on MCM41 using catalytic chemical vapor deposition of acetylene.

High-quality single-wall carbon nanotubes (SWNTs) with narrow diameter distribution have been grown on Fe/Co-loaded MCM41 by using acetylene as the carbon source within a short reaction period, typically 10 min or less. The optimum temperature for SWNTs synthesis is 850 degrees C. Longer reaction time (i.e., 30 min) favors the formation of multiwall carbon nanotubes (MWNTs) and graphitic carbon. When the reaction time is reduced to less than 10 min, formation of MWNTs and graphitic carbon is greatly suppressed, and high-quality SWNTs dominates the yield. The surface of the as-grown SWNTs is found to be free from amorphous carbon, as observed from high-resolution transmission electron microscope (HRTEM) analysis. Raman spectral data show a G/D ratio above 10, indicating that the as-grown SWNTs have very few defects. Furthermore, radial breathing mode (RBM) analysis reveals that the diameter distribution of the current SWNTs is narrow and ranges from 0.64 to 1.36 nm.

Journal Article↗

Entrapping of exohedral metallofullerenes in carbon nanotubes: (CsC60)n@SWNT nano-peapods.

Exohedral C60-based metallofullerenes, CsC60, have been synthesized and successfully encapsulated into single-wall carbon nanotubes (SWNTs) in high yield by reducing C60 molecules into anions. High-resolution transmission electron microscopy (HRTEM) images and in situ electron energy loss spectroscopy (EELS) indicate that Cs atoms and C60 molecules align within SWNTs as CsC60 exohedral metallofullerenes, and that the formal charge state of encaged CsC60 is expressed as Cs+1C60-1. The present peapods with the exohedral metallofullerenes provide a new insight and the possibility to fine-tune the electronic and transport properties of carbon nanotubes.

Journal Article↗

Development of water-soluble metallofullerenes as X-ray contrast media.

Fullerenes are a new carbonic allotrope having a cage structure. We investigated whether fullerenes containing one or two atoms of heavy metals could be an X-ray contrast material with little adverse effects. One or two atoms of dysprosium (Dy), erbium (Er), gadolinium (Gd), europium (Eu) and lutetium (Lu) were encapsulated into fullerene (C(82)), which was synthesized as a polyhydroxyl form (e.g., Gd@C(82)(OH)n, n=40, Gd - fullerenols). They were dissolved in water at maximum soluble concentrations and subjected to CT number analysis. The CT numbers of the solutions were measured using a 4- or 16-row multidetector CT scanner. The CT number of the water-soluble metallofullerenes were 56.0 HU for Dy@C(82)(OH)(40), 111.5 HU for Er@C(82)(OH)(40), 58.4 HU for Gd@C(82)(OH)(40), 100.9 HU for Eu@C(82)(OH)(40) and 23.3 HU for Lu(2)@C(82)(OH)(40). The CT numbers of the metallofullerenes investigated in the present study were not high enough to be used in the clinic in place of iodinated contrast materials. However, if nanotechnology progresses in the near future, it may prove to have a possibility as an X-ray contrast material.

Contrast Media↗

Determination of optical isomers for left-handed or right-handed chiral double-wall carbon nanotubes.

The handedness relationship between adjacent layers in nested double-wall carbon nanotubes (DWNTs) has been investigated for the first time. Our high-resolution electron microscopy analysis on a series of specimen tilts can successfully tell the handedness of each constituent nanotube in a DWNT, and therefore the chiral indices (n, m) including their optical isomers [(n, m) or (m, n)] of inner and outer nanotubes can be uniquely determined. It is shown that right-handed and left-handed nanotubes are equally distributed for both the inner and outer nanotubes in the examined specimens and a preferable handedness relationship between the adjacent layers in DWNT may exist.

Journal Article↗

In situ observation of thermal relaxation of interstitial-vacancy pair defects in a graphite gap.

Direct observation of individual defects during formation and annihilation in the interlayer gap of double-wall carbon nanotubes (DWNT) is demonstrated by high-resolution transmission electron microscopy. The interlayer defects that bridge two adjacent graphen layers in DWNT are stable for a macroscopic time at the temperature below 450 K. These defects are assigned to a cluster of one or two interstitial-vacancy pairs (I-V pairs) and often disappear just after their formation at higher temperatures due to an instantaneous recombination of the interstitial atom with vacancy. Systematic observations performed at the elevated temperatures find a threshold for the defect annihilation at 450-500 K, which, indeed, corresponds to the known temperature for the Wigner energy release.

Journal Article↗

Atomic correlation between adjacent graphene layers in double-wall carbon nanotubes.

Atomic correlation between adjacent graphene layers was elucidated for double-wall carbon nanotubes (DWNTs) through a chiral index assignment of two nested nanotubes by high-resolution transmission electron microscopy. Our analysis provides a rather constant diameter difference close to 0.75 nm but no chiral angle correlation between the constituent nanotubes in the concentric DWNTs. The local atomic correlation as a commensurate graphene stacking was repeatedly found in eccentric DWNTs and circumscribed nanotubes, which should lead to elastic deformation and bundling of nanotubes.

Journal Article↗

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica.

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.

Alcohols↗

Preparation and supramolecular properties of unadulterated glycosyl liposomes from a bis(alpha-D-mannopyranosyl)-[60]fullerene conjugate.

The bis(alpha-D-mannopyranosyl)-[60]fullerene conjugate 3 was prepared by thermal coupling of C60 and either 2-azidoethyl 2,3,4,6-tetra-O-acetyl- or 2,3;4,6-di-O-isopropylidene-alpha-D-mannopyranoside (Scheme). Compound 3 was found to readily self-assemble. Dynamic-light-scattering (DLS) and atomic-force microscopy (AFM) experiments supported that the amphiphilic compound gives rise to nano-sized supramolecular structures during sugar deprotection (Ac-group removal) performed in MeOH/CH2Cl2 solution. Encapsulation studies with an aqueous suspension of 3 showed that the self-assembling structure envelopes Ba2+ and the fluorescent dye Acridine Red during its formation, which indicates that it resembles a bilayer vesicle or an unadulterated liposome with an inner hollow space. In addition to this notable property, the unique molecular geometry of the spatially arranged mannosyl surface residues of 3 gives rise to strong binding of the carbohydrate-recognizing lectin Con A. Hence, the polar amphiphilic end of 3 mimics the structure of 3,6-branched tri-alpha-D-mannoside (6; Fig. 3), a natural ligand of the Con A protein.

Barium↗

Single molecular orientation switching of an endohedral metallofullerene.

The single molecular orientation switching of the Tb@C82 endohedral metallofullerene has been studied by using low-temperature ultrahigh vacuum (UHV) scanning tunneling microscopy (STM). An octanethiol self-assembled monolayer (SAM) was introduced between Tb@C82 and the Au111 substrate to control the thermal rotational states of Tb@C82. Scanning tunneling spectroscopy (STS) of Tb@C82 on an octanethiol SAM at 13 K demonstrated hysteresis including negative differential conductance (NDC). This observed hysteresis and NDC is interpreted in terms of a switching of the Tb@C82 molecular orientation caused by the interaction between its electric dipole moment and an external electric field.

Carbon↗

Lipid-altering changes and pleiotropic effects of atorvastatin in patients with hypercholesterolemia.

In this prospective study, we found beneficial short-term effects from atorvastatin therapy, including effects on low-density lipoprotein subfractions and remnant-like lipoprotein particle cholesterol, antioxidant effects, and alterations in endothelial function that may be important in early benefit from statin therapy; some effects would support much earlier benefit than previously reported. We also found long-term effects of atorvastatin, including decreased plasminogen activator inhibitor type-1 and additional significant alterations in low-density lipoprotein subfractions and endothelial function, supporting benefits from continuous long-term atorvastatin therapy beyond early reversal of hypercholesterolemia.

Adult↗

Diagnosis of cardiac amyloidosis based on the myocardial velocity profile in the hypertrophied left ventricular wall.

The myocardial velocity profile (MVP), derived from color-coded tissue Doppler imaging (TDI), can identify transmural heterogeneity based on the physiology and pathology of the myocardium. This study sought to clarify whether the MVP can differentiate cardiac amyloidosis from other causes of left ventricular hypertrophy. We recorded the MVP and determined its myocardial velocity gradient (MVG) in the ventricular septum and left ventricular posterior wall using color-coded TDI in 10 patients with cardiac amyloidosis, in 25 patients with hypertensive hypertrophied left ventricular wall, in 25 patients with asymmetric septal hypertrophy of hypertrophic cardiomyopathy, and in 20 clinically normal controls. End-diastolic ventricular septal thickness was similar among the cardiac amyloidosis, hypertension, and hypertrophic cardiomyopathy groups. Percent systolic thickening of the ventricular septum and left ventricular posterior wall calculated from M-mode left ventricular echocardiograms was lower in the cardiac amyloidosis group than in the hypertension, hypertrophic cardiomyopathy, or control group. Peak MVGs during systole and early diastole were lowest in the cardiac amyloidosis group, followed, in order, by the control, hypertension, and hypertrophic cardiomyopathy groups. The systolic and early diastolic MVPs in the ventricular septum and left ventricular posterior wall showed a characteristic serrated pattern in all patients with cardiac amyloidosis, but not in any other patient groups. In conclusion, MVPs in the ventricular septum and left ventricular posterior wall show a distinctive serrated pattern that may be related to amyloid deposition in the myocardium. Myocardial tissue characterization using color-coded TDI provides diagnostic information in patients with cardiac amyloidosis.

Adult↗