Biomedical subjects

Hoichang Yang

Publications and source records attributed to Hoichang Yang.

9 recordsLinked to original sources

PubMed2006

Enhanced electrical percolation due to interconnection of three-dimensional pentacene islands in thin films on low surface energy polyimide gate dielectrics.

The role of lateral interconnections between three-dimensional pentacene islands on low surface energy polyimide gate dielectrics was investigated by the measurement of the surface coverage dependence of the charge mobility and the use of conducting-probe atomic force microscopy (CP-AFM). From the correlation between the electrical characteristics and the morphological evolution of the three-dimensionally grown pentacene films-based field-effect transistors, we found that during film growth, the formation of interconnections between the three-dimensional pentacene islands that are isolated at the early stage contributes significantly to the enhancement process of charge mobility. The CP-AFM current mapping images of the pentacene films also indicate that the lateral interconnections play an important role in the formation of good electrical percolation pathways between the three-dimensional pentacene islands.

Journal Article↗

PubMed2006

Increasing protein stability through control of the nanoscale environment.

We have discovered a novel property of single-walled carbon nanotubes (SWNTs)-their ability to stabilize proteins at elevated temperatures and in organic solvents to a greater extent than conventional flat supports. Experimental results and theoretical analysis reveal that the stabilization results from the curvature of SWNTs, which suppresses unfavorable protein-protein lateral interactions. Our results also indicate that the phenomenon is not unique to SWNTs but could be extended to other nanomaterials. The protein-nanotube conjugates represent a new generation of active and stable catalytic materials with potential use in biosensors, diagnostics, and bioactive films and other hybrid materials that integrate biotic and abiotic components.

Adsorption↗

PubMed2006

Blood compatible carbon nanotubes--nano-based neoproteoglycans.

Although nanotechnology has provided a rich variety of nanomaterials (1-100 nm) for in vivo medical applications, the blood compatibility of all these nanobiomaterials is still largely unexamined. Here, we report the preparation of blood-compatible carbon nanotubes (CNTs) that potentially represent the building blocks for nanodevices having in vivo applications. Activated partial thromboplastin time (APTT) and thromboelastography (TEG) studies prove that heparinization can significantly enhance the blood compatibility of nanomaterials.

Biocompatible Materials↗

PubMed2006

Protein-assisted solubilization of single-walled carbon nanotubes.

We report a simple method that uses proteins to solubilize single-walled carbon nanotubes (SWNTs) in water. Characterization by a variety of complementary techniques including UV-Vis spectroscopy, Raman spectroscopy, and atomic force microscopy confirmed the dispersion at the individual nanotube level. A variety of proteins differing in size and structure were used to generate individual nanotube solutions by this noncovalent functionalization procedure. Protein-mediated solubilization of nanotubes in water may be important for biomedical applications. This method of solubilization may also find use in approaches for controlling the assembly of nanostructures, and the wide variety of functional groups present on the adsorbed proteins may be used as orthogonal reactive handles for the functionalization of carbon nanotubes.

Journal Article↗

PubMed2005

Conducting AFM and 2D GIXD studies on pentacene thin films.

Among all organic semiconductors, pentacene has been shown to have the highest thin film mobility reported to date. The crystalline structure of the first few pentacene layers deposited on a dielectric substrate is strongly dependent on the dielectric surface properties, directly affecting the charge mobility of pentacene thin film OTFTs. Herein, we report that there is a direct correlation between the crystalline structure of the initial submonolayer of a pentacene film and the mobility of the corresponding 60-nm-thick films showing terrace-like structure, as confirmed by 2D grazing-incidence X-ray diffraction and atomic force microscopy. Specifically, multilayered pentacene films, grown from single crystal-like faceted islands on HMDS-treated surface, have shown much higher charge mobility (mu = 3.4 +/- 0.5 cm2/Vs) than those with polycrystalline dendritic islands (mu = 0.5 +/- 0.15 cm2/Vs) on OTS-treated ones.

Crystallization↗

PubMed2005

Quantitative equivalence between polymer nanocomposites and thin polymer films.

The thermomechanical responses of polymers, which provide limitations to their practical use, are favourably altered by the addition of trace amounts of a nanofiller. However, the resulting changes in polymer properties are poorly understood, primarily due to the non-uniform spatial distribution of nanoparticles. Here we show that the thermomechanical properties of 'polymer nanocomposites' are quantitatively equivalent to the well-documented case of planar polymer films. We quantify this equivalence by drawing a direct analogy between film thickness and an appropriate experimental interparticle spacing. We show that the changes in glass-transition temperature with decreasing interparticle spacing for two filler surface treatments are quantitatively equivalent to the corresponding thin-film data with a non-wetting and a wetting polymer-particle interface. Our results offer new insights into the role of confinement on the glass transition, and we conclude that the mere presence of regions of modified mobility in the vicinity of the particle surfaces, that is, a simple two-layer model, is insufficient to explain our results. Rather, we conjecture that the glass-transition process requires that the interphase regions surrounding different particles interact.

Elasticity↗

PubMed2004

Aggregation behavior of single-walled carbon nanotubes in dilute aqueous suspension.

The aggregation behavior of colloidal single-walled carbon nanotubes (SWNT) in dilute aqueous suspensions was investigated using a novel light scattering measurement technique. The aggregation of SWNT in three suspensions was examined: (1) nanotubes after acid treatment; (2) as-received nanotubes stabilized by a nonionic surfactant; and (3) acid-treated nanotubes with nonionic surfactant. Continuous light scattering measurements of the SWNT suspensions (probing the 38-436 nm length scale) made over two weeks showed that the nanotubes in each sample formed networks with fractal-like structures. The as-received nanotubes were stable over the measurement period, while the acid-treated nanotube suspension showed greater dispersion variability over time, yielding looser structures at large length scales and more compact structures at smaller length scales. The addition of surfactant to the acid-treated suspension significantly enhanced nanotube dispersion.

Journal Article↗

PubMed2003

Cu/Zn superoxide dismutase can form pore-like structures.

Mutations in Cu/Zn superoxide dismutase (SOD) are associated with familial amyotrophic lateral sclerosis (FALS), a neurodegenerative disease that is characterized by the selective death of motor neurons. Despite the genetic association made between the protein and the disease, the mechanism by which the mutant SOD proteins become toxic is still a mystery. Using wild-type SOD and three pathogenic mutants (A4V, G37R, and G85R), we show that the copper-induced oxidation of metal-depleted SOD causes its in vitro aggregation into pore-like structures, as determined by atomic force microscopy. Because toxic pores have been recently implicated in the pathogenic mechanism of other neurodegenerative diseases, these results raise the possibility that the aberrant self-assembly of oxidatively damaged SOD mutants into toxic oligomers or pores may have a pathological role in FALS.

Copper↗

PubMed2003

Single-step in situ synthesis of polymer-grafted single-wall nanotube composites.

An in situ composite synthesis technique has been developed by grafting polystyrene chains onto single-wall carbon nanotubes (SWNTs) via a single-step debundling/polymerization scheme. The method, based on established anionic polymerization techniques, eliminates the need for nanotube pretreatment prior to functionalization and allows attachment of polymer molecules to pristine tubes without altering their original structure. The composites obtained contain well-dispersed SWNTs with good nanotube-matrix interaction. The scheme is quite general in nature and can be applied to different polymer systems. The simplicity and scalability of the process can lead to the realization of superior nanotube-based polymer composites for applications as advanced multifunctional structural materials.

Journal Article↗