Biomedical subjects

Homme W Hellinga

Publications and source records attributed to Homme W Hellinga.

16 recordsLinked to original sources

PubMed2006

Local encoding of computationally designed enzyme activity.

One aim of computational protein design is to introduce novel enzyme activity into proteins of known structure by predicting mutations that stabilize transition states. Previously, we showed that it is possible to introduce triose phosphate isomerase activity into the ribose-binding protein of Escherichia coli by constructing 17 mutations in the first two layers of residues that surround the wild-type ligand-binding site. Here, we report that these mutations can be "transplanted" into a homologous ribose-binding protein, isolated from the hyperthermophilic bacterium Thermoanaerobacter tengcongensis, with retention of catalytic activity, substrate affinity, and reaction pH dependence. The observed 10(5)-10(6)-fold rate enhancement corresponds to 70% of the maximally known transition-state binding energy. The wild-type sequences in these two homologues are almost perfectly conserved in the vicinity of their ribose-binding sites, but diverge significantly at increasing distance from these sites. The results demonstrate that the computationally designed mutations are sufficient to encode the observed enzyme activity, that all the observed activity is encoded locally within the layer of residues directly in contact with the substrate and that, in this case, at least 70% of transition state stabilization energy can be achieved using straightforward considerations of stereochemical complementarity between enzyme and reactants.

Amino Acid Sequence↗

PubMed2006

The crystal structure of a thermophilic glucose binding protein reveals adaptations that interconvert mono and di-saccharide binding sites.

Periplasmic binding proteins (PBPs) comprise a protein superfamily that is involved in prokaryotic solute transport and chemotaxis. These proteins have been used to engineer reagentless biosensors to detect natural or non-natural ligands. There is considerable interest in obtaining very stable members of this superfamily from thermophilic bacteria to use as robust engineerable parts in biosensor development. Analysis of the recently determined genome sequence of Thermus thermophilus revealed the presence of more than 30 putative PBPs in this thermophile. One of these is annotated as a glucose binding protein (GBP) based on its genetic linkage to genes that are homologous to an ATP-binding cassette glucose transport system, although the PBP sequence is homologous to periplasmic maltose binding proteins (MBPs). Here we present the cloning, over-expression, characterization of cognate ligands, and determination of the X-ray crystal structure of this gene product. We find that it is a very stable (apo-protein Tm value is 100(+/- 2) degrees C; complexes 106(+/- 3) degrees C and 111(+/- 1) degrees C for glucose and galactose, respectively) glucose (Kd value is 0.08(+/- 0.03) microM) and galactose (Kd value is 0.94(+/- 0.04) microM) binding protein. Determination of the X-ray crystal structure revealed that this T. thermophilus glucose binding protein (ttGBP) is structurally homologous to MBPs rather than other GBPs. The di or tri-saccharide ligands in MBPs are accommodated in long relatively shallow grooves. In the ttGBP binding site, this groove is partially filled by two loops and an alpha-helix, which create a buried binding site that allows binding of only monosaccharides. Comparison of ttGBP and MBP provides a clear example of structural adaptations by which the size of ligand binding sites can be controlled in the PBP super family.

Amino Acid Sequence↗

PubMed2006

Binding and signaling of surface-immobilized reagentless fluorescent biosensors derived from periplasmic binding proteins.

Development of biosensor devices typically requires incorporation of the molecular recognition element into a solid surface for interfacing with a signal detector. One approach is to immobilize the signal transducing protein directly on a solid surface. Here we compare the effects of two direct immobilization methods on ligand binding, kinetics, and signal transduction of reagentless fluorescent biosensors based on engineered periplasmic binding proteins. We used thermostable ribose and glucose binding proteins cloned from Thermoanaerobacter tengcongensis and Thermotoga maritima, respectively. To test the behavior of these proteins in semispecifically oriented layers, we covalently modified lysine residues with biotin or sulfhydryl functions, and attached the conjugates to plastic surfaces derivatized with streptavidin or maleimide, respectively. The immobilized proteins retained ligand binding and signal transduction but with adversely affected affinities and signal amplitudes for the thiolated, but not the biotinylated, proteins. We also immobilized these proteins in a more specifically oriented layer to maleimide-derivatized plates using a His(2)Cys(2) zinc finger domain fused at either their N or C termini. Proteins immobilized this way either retained, or displayed enhanced, ligand affinity and signal amplitude. In all cases tested ligand binding by immobilized proteins is reversible, as demonstrated by several iterations of ligand loading and elution. The kinetics of ligand exchange with the immobilized proteins are on the order of seconds.

Biosensing Techniques↗

PubMed2006

Identification of cognate ligands for the Escherichia coli phnD protein product and engineering of a reagentless fluorescent biosensor for phosphonates.

The Escherichia coli phnD gene is hypothesized to code for the periplasmic binding component of a phosphonate uptake system. Here we report the characterization of the phosphonate-binding properties of the phnD protein product. We find that PhnD exhibits high affinity for 2-aminoethylphosphonate (5 nM), the most commonly occurring natural phosphonate produced by lower eukaryotes, but also binds several other phosphonates with micromolar affinities. A significant number of man-made phosphonates, such as insecticides and chemical warfare agents, are chemical threats and environmental pollutants. Consequently, there is an interest in developing methods for the detection and bioremediation of phosphonates. Bacterial periplasmic-binding proteins have been utilized for developing reagentless biosensors that report analytes by coupling ligand-binding events to changes in the emission properties of a covalently conjugated environmentally-sensitive fluorophore. Several PhnD conjugates described here show large changes in fluorescence upon binding to methylphosphonate (MP), with two conjugates exhibiting up to 50% decrease in emission intensity. Since MP is the final degradation product of many nerve agents, these PhnD conjugates can function as components in a biosensor system for chemical warfare agents.

Biosensing Techniques↗

PubMed2005

Design of a calcium-binding protein with desired structure in a cell adhesion molecule.

Ca2+, "a signal of life and death", controls numerous cellular processes through interactions with proteins. An effective approach to understanding the role of Ca2+ is the design of a Ca2+-binding protein with predicted structural and functional properties. To design de novo Ca2+-binding sites in proteins is challenging due to the high coordination numbers and the incorporation of charged ligand residues, in addition to Ca2+-induced conformational change. Here, we demonstrate the successful design of a Ca2+-binding site in the non-Ca2+-binding cell adhesion protein CD2. This designed protein, Ca.CD2, exhibits selectivity for Ca2+ versus other di- and monovalent cations. In addition, La3+ (Kd 5.0 microM) and Tb3+ (Kd 6.6 microM) bind to the designed protein somewhat more tightly than does Ca2+ (Kd 1.4 mM). More interestingly, Ca.CD2 retains the native ability to associate with the natural target molecule. The solution structure reveals that Ca.CD2 binds Ca2+ at the intended site with the designed arrangement, which validates our general strategy for designing de novo Ca2+-binding proteins. The structural information also provides a close view of structural determinants that are necessary for a functional protein to accommodate the metal-binding site. This first success in designing Ca2+-binding proteins with desired structural and functional properties opens a new avenue in unveiling key determinants to Ca2+ binding, the mechanism of Ca2+ signaling, and Ca2+-dependent cell adhesion, while avoiding the complexities of the global conformational changes and cooperativity in natural Ca2+-binding proteins. It also represents a major achievement toward designing functional proteins controlled by Ca2+ binding.

Animals↗

PubMed2005

Analysis of allosteric signal transduction mechanisms in an engineered fluorescent maltose biosensor.

We previously reported the construction of a family of reagentless fluorescent biosensor proteins by the structure-based design of conjugation sites for a single, environmentally sensitive small molecule dye, thus providing a mechanism for the transduction of ligand-induced conformational changes into a macroscopic fluorescence observable. Here we investigate the microscopic mechanisms that may be responsible for the macroscopic fluorescent changes in such Fluorescent Allosteric Signal Transduction (FAST) proteins. As case studies, we selected three individual cysteine mutations (F92C, D95C, and S233C) of Escherichia coli maltose binding protein (MBP) covalently labeled with a single small molecule fluorescent probe, N-((2-iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1,3-diazole (NBD), each giving rise to a robust FAST protein with a distinct maltose-dependent fluorescence response. The fluorescence emission intensity, anisotropy, lifetime, and iodide-dependent fluorescence quenching were determined for each conjugate in the presence and absence of maltose. Structure-derived solvent accessible surface areas of the three FAST proteins are consistent with experimentally observed quenching data. The D95C protein exhibits the largest fluorescence change upon maltose binding. This mutant was selected for further characterization, and residues surrounding the fluorophore coupling site were mutagenized. Analysis of the resulting mutant FAST proteins suggests that specific hydrogen-bonding interactions between the fluorophore molecule and two tyrosine side-chains, Tyr171 and Tyr176, in the open state but not the closed, are responsible for the dramatic fluorescence response of this construct. Taken together these results provide insights that can be used in future design cycles to construct fluorescent biosensors that optimize signaling by engineering specific hydrogen bonds between a fluorophore and protein.

Allosteric Site↗

PubMed2004

Orthogonal site-specific protein modification by engineering reversible thiol protection mechanisms.

Covalent modification is an important strategy for introducing new functions into proteins. As engineered proteins become more sophisticated, it is often desirable to introduce multiple, modifications involving several different functionalities in a site-specific manner. Such orthogonal labeling schemes require independent labeling of differentially reactive nucleophilic amino acid side chains. We have developed two protein-mediated protection schemes that permit independent labeling of multiple thiols. These schemes exploit metal coordination or disulfide bond formation to reversibly protect cysteines in a Cys(2)His(2) zinc finger domain. We constructed a variety of N- and C-terminal fusions of these domains with maltose-binding protein, which were labeled with two or three different fluorophores. Multiple modifications were made by reacting an unprotected cysteine in MBP first, deprotecting the zinc finger, and then reacting the zinc finger cysteines. The fusion proteins were orthogonally labeled with two different fluorophores, which exhibited intramolecular fluorescene resonance energy transfer (FRET). These conjugates showed up to a threefold ratiometric change in emission intensities in response to maltose binding. We also demonstrated that the metal- and redox-mediated protection methods can be combined to produce triple independent modifications, and prepared a protein labeled with three different fluorophores that exhibited a FRET relay. Finally, labeled glucose-binding protein was covalently patterned on glass slides using thiol-mediated immobilization chemistries. Together, these experiments demonstrated that reversible thiol protection schemes provide a rapid, straightforward method for producing multiple, site-specific modifications.

Binding Sites↗

PubMed2004

Computational design of a biologically active enzyme.

Rational design of enzymes is a stringent test of our understanding of protein chemistry and has numerous potential applications. Here, we present and experimentally validate the computational design of enzyme activity in proteins of known structure. We have predicted mutations that introduce triose phosphate isomerase activity into ribose-binding protein, a receptor that normally lacks enzyme activity. The resulting designs contain 18 to 22 mutations, exhibit 10(5)- to 10(6)-fold rate enhancements over the uncatalyzed reaction, and are biologically active, in that they support the growth of Escherichia coli under gluconeogenic conditions. The inherent generality of the design method suggests that many enzymes can be designed by this approach.

Algorithms↗

PubMed2004

Computational design of receptors for an organophosphate surrogate of the nerve agent soman.

We report the computational design of soluble protein receptors for pinacolyl methyl phosphonic acid (PMPA), the predominant hydrolytic product of the nerve agent soman. Using recently developed computational protein design techniques, the ligand-binding pockets of two periplasmic binding proteins, glucose-binding protein and ribose-binding protein, were converted to bind PMPA instead of their cognate sugars. The designs introduce 9-12 mutations in the parent proteins. Twelve of 20 designs tested exhibited PMPA-dependent changes in emission intensity of a fluorescent reporter with affinities between 45 nM and 10 microM. The contributions to ligand binding by individual residues were determined in two designs by alanine-scanning mutagenesis, and are consistent with the molecular models. These results demonstrate that designed receptors with radically altered binding specificities and affinities that rival or exceed those of the parent proteins can be successfully predicted. The designs vary in parent scaffold, sequence diversity, and orientation of docked ligand, suggesting that the number of possible solutions to the design problem is large and degenerate. This observation has implications for the genesis of biological function by random processes. The designed receptors reported here may have utility in the development of fluorescent biosensors for monitoring nerve agents.

Binding Sites↗

PubMed2004

Periplasmic binding proteins: a versatile superfamily for protein engineering.

The diversity of biological function, ligand binding, conformational changes and structural adaptability of the periplasmic binding protein superfamily have been exploited to engineer biosensors, allosteric control elements, biologically active receptors and enzymes using a combination of techniques, including computational design. Extensively redesigned periplasmic binding proteins have been re-introduced into bacteria to function in synthetic signal transduction pathways that respond to extracellular ligands and as biologically active enzymes.

Computer-Aided Design↗

PubMed2003

Rational design of a calcium-binding protein.

Calcium ions play key roles as structural components in biomineralization and as a second messenger in signaling pathways. We have introduced a de novo designed calcium-binding site into the framework of a non-calcium-binding protein, domain 1 of CD2. The resulting protein selectively binds calcium over magnesium with calcium-binding affinity comparable to that of natural extracellular calcium-binding proteins (K(d) of 50 microM). This experiment is the first successful metalloprotein design that has a high coordination number (seven) metal-binding site constructed into a beta-sheet protein. Our results demonstrate the feasibility of designing a single calcium-binding site into a host protein, taking into account only local properties of a calcium-binding site obtained by a survey of natural calcium-binding proteins and chelators. The resulting site exhibits strong metal selectivity, suggesting that it should now be feasible to understand and manipulate signaling processes by designing novel calcium-modulated proteins with specifically desired functions and to affect their stability.

Binding Sites↗

PubMed2003

An empirical model for electrostatic interactions in proteins incorporating multiple geometry-dependent dielectric constants.

Here we introduce an electrostatic model that treats the complexity of electrostatic interactions in a heterogeneous protein environment by using multiple parameters that take into account variations in protein geometry, local structure, and the type of interacting residues. The optimal values for these parameters were obtained by fitting the model to a large dataset of 260 experimentally determined pK(a) values distributed over 41 proteins. We obtain fits between the calculated and observed values that are significantly better than the null model. The model performs well on the groups that exhibit large pK(a) shifts from solution values in response to the protein environment and compares favorably with other, successful continuum models. The empirically determined values of the parameters correlate well with experimentally observed contributions of hydrogen bonds and ion pairs as well as theoretically predicted magnitudes of charge-charge and charge-polar interactions. The magnitudes of the dielectric constants assigned to different regions of the protein rank according to the strength of the relaxation effects expected for the core, boundary, and surface. The electrostatic interactions in this model are pairwise decomposable and can be calculated rapidly. This model is therefore well suited for the large computations required for simulating protein properties and especially for prediction of mutations for protein design.

Algorithms↗

PubMed2003

Computational design of receptor and sensor proteins with novel functions.

The formation of complexes between proteins and ligands is fundamental to biological processes at the molecular level. Manipulation of molecular recognition between ligands and proteins is therefore important for basic biological studies and has many biotechnological applications, including the construction of enzymes, biosensors, genetic circuits, signal transduction pathways and chiral separations. The systematic manipulation of binding sites remains a major challenge. Computational design offers enormous generality for engineering protein structure and function. Here we present a structure-based computational method that can drastically redesign protein ligand-binding specificities. This method was used to construct soluble receptors that bind trinitrotoluene, l-lactate or serotonin with high selectivity and affinity. These engineered receptors can function as biosensors for their new ligands; we also incorporated them into synthetic bacterial signal transduction pathways, regulating gene expression in response to extracellular trinitrotoluene or l-lactate. The use of various ligands and proteins shows that a high degree of control over biomolecular recognition has been established computationally. The biological and biosensing activities of the designed receptors illustrate potential applications of computational design.

Amino Acid Sequence↗

PubMed2002

Converting a maltose receptor into a nascent binuclear copper oxygenase by computational design.

Computational protein design methods were used to identify mutations that are predicted to introduce a binuclear copper center coordinated by six histidines, replacing the maltose-binding site in Escherichia coli maltose-binding protein (MBP) with an oxygen-binding site. A small family of five candidate designs consisting of 9 to 10 mutations each was constructed by oligonucleotide-directed mutagenesis. These mutant proteins were expressed and purified, and their stability, copper- and cobalt-binding properties, and interactions of the resulting metalloprotein complexes with azide, hydrogen peroxide, and dioxygen were characterized. We identified one 10-fold mutant, MBP.Hc.E, that can form Cu(II)(2) and Co(II)(2) complexes that interact with H(2)O(2) and O(2). The Co(II)(2) protein reacts with H(2)O(2) to form a complex that is spectroscopically similar to a synthetic model that structurally mimics the oxy-hemocyanin core, whereas the Cu(II)(2) protein reacted with O(2) or H(2)O(2) does not. We postulate that the equilibrium between the open and closed conformations of MBP allows species with variable Cu-Cu distances to form, and that such species can bind ligands in geometries that are not observed in natural type III centers. Introduction of one additional mutation in the hinge region of MBP, I329F, known to favor formation of the closed state, results in a binuclear copper center that when reacted with low concentrations of H(2)O(2) mimics the spectroscopic signature of oxy-hemocyanin.

ATP-Binding Cassette Transporters↗

PubMed2002

Control of a biomolecular motor-powered nanodevice with an engineered chemical switch.

The biophysical and biochemical properties of motor proteins have been well-studied, but these motors also show promise as mechanical components in hybrid nano-engineered systems. The cytoplasmic F(1) fragment of the adenosine triphosphate synthase (F1-ATPase) can function as an ATP-fuelled rotary motor and has been integrated into self-assembled nanomechanical systems as a mechanical actuator. Here we present the rational design, construction and analysis of a mutant F1-ATPase motor containing a metal-binding site that functions as a zinc-dependent, reversible on/off switch. Repeated cycles of zinc addition and removal by chelation result in inhibition and restoration, respectively, of both ATP hydrolysis and motor rotation of the mutant, but not of the wild-type F1 fragment. These results demonstrate the ability to engineer chemical regulation into a biomolecular motor and represent a critical step towards controlling integrated nanomechanical devices at the single-molecule level.

Actins↗

PubMed2002

Construction of a fluorescent biosensor family.

Bacterial periplasmic binding proteins (bPBPs) are specific for a wide variety of small molecule ligands. bPBPs undergo a large, ligand-mediated conformational change that can be linked to reporter functions to monitor ligand concentrations. This mechanism provides the basis of a general system for engineering families of reagentless biosensors that share a common physical signal transduction functionality and detect many different analytes. We demonstrate the facility of designing optical biosensors based on fluorophore conjugates using 8 environmentally sensitive fluorophores and 11 bPBPs specific for diverse ligands, including sugars, amino acids, anions, cations, and dipeptides. Construction of reagentless fluorescent biosensors relies on identification of sites that undergo a local conformational change in concert with the global, ligand-mediated hinge-bending motion. Construction of cysteine mutations at these locations then permits site-specific coupling of environmentally sensitive fluorophores that report ligand binding as changes in fluorescence intensity. For 10 of the bPBPs presented in this study, the three-dimensional receptor structure was used to predict the location of reporter sites. In one case, a bPBP sensor specific for glutamic and aspartic acid was designed starting from genome sequence information and illustrates the potential for discovering novel binding functions in the microbial genosphere using bioinformatics.

Amino Acid Sequence↗