Biomedical subjects

Hong Wan Ng

Publications and source records attributed to Hong Wan Ng.

3 recordsLinked to original sources

PubMed2005

Development and validation of a CO-C7 FE complex for biomechanical study.

In this study, the digitized geometrical data of the embalmed skull and vertebrae (C0-C7) of a 68-year old male cadaver were processed to develop a comprehensive, geometrically accurate, nonlinear C0-C7 FE model. The biomechanical response of human neck under physiological static loadings, near vertex drop impact and rear-end impact (whiplash) conditions were investigated and compared with published experimental results. Under static loading conditions, the predicted moment-rotation relationships of each motion segment under moments in midsagittal plane and horizontal plane agreed well with experimental data. In addition, the respective predicted head impact force history and the S-shaped kinematics responses of head-neck complex under near-vertex drop impact and rear-end conditions were close to those observed in reported experiments. Although the predicted responses of the head-neck complex under any specific condition cannot perfectly match the experimental observations, the model reasonably reflected the rotation distributions among the motion segments under static moments and basic responses of head and neck under dynamic loadings. The current model may offer potentials to effectively reflect the behavior of human cervical spine suitable for further biomechanics and traumatic studies.

Cervical Vertebrae↗

PubMed2004

Finite element analysis of moment-rotation relationships for human cervical spine.

A comprehensive, geometrically accurate, nonlinear C0-C7 FE model of head and cervical spine based on the actual geometry of a human cadaver specimen was developed. The motions of each cervical vertebral level under pure moment loading of 1.0 Nm applied incrementally on the skull to simulate the movements of the head and cervical spine under flexion, tension, axial rotation and lateral bending with the inferior surface of the C7 vertebral body fully constrained were analysed. The predicted range of motion (ROM) for each motion segment were computed and compared with published experimental data. The model predicted the nonlinear moment-rotation relationship of human cervical spine. Under the same loading magnitude, the model predicted the largest rotation in extension, followed by flexion and axial rotation, and least ROM in lateral bending. The upper cervical spines are more flexible than the lower cervical levels. The motions of the two uppermost motion segments account for half (or even higher) of the whole cervical spine motion under rotational loadings. The differences in the ROMs among the lower cervical spines (C3-C7) were relatively small. The FE predicted segmental motions effectively reflect the behavior of human cervical spine and were in agreement with the experimental data. The C0-C7 FE model offers potentials for biomedical and injury studies.

Biomechanical Phenomena↗

PubMed2004

Probabilistic design analysis of the influence of material property on the human cervical spine.

Studies reported previously in the literature have described the importance of material variation on the cervical responses and have examined some effects by varying the material properties, but there is no systematic approach using statistical methods to understand the influence of material variation on a cervical spine model under a full range of loading conditions, especially under compression and anterior and posterior shear. A probabilistic design system based on Monte Carlo simulation methods using Latin hypercube sampling techniques is used to analyze the material sensitivity of a C4-C6 cervical spine model involving 13 uncertain input parameters on the biomechanical responses and disc annulus stresses under compression, anterior shear, posterior shear, flexion, extension, lateral bending, and axial rotation. The loading types and range of values were as follows: compression, 0-1 mm; anterior shear, 0-2 mm; posterior shear, 0-3.5 mm; flexion, extension, lateral bending, and axial rotation. 0-1.8 Nm with 73.6-N preload. For each case, the load-deflection and key stress values at various spinal components were captured after each load step. The model was also validated under the same conditions. The minimum and maximum predicted responses were within the range of the experimental data. Ignoring compression loading, the combined effects on the biomechanical responses of the cervical ligaments under the remaining loads are enormous. Their total impacts are almost equal to or slightly less than the influence of disc annulus. Results show that the fiber mechanical properties did not have a significant effect on the compressive stiffness. This study reveals important features that help us identify the critical input parameters and enable us to reduce the development time of a patient-specific biomechanical model.

Biomechanical Phenomena↗