Biomedical subjects

Hoon Eui Jeong

Publications and source records attributed to Hoon Eui Jeong.

3 recordsLinked to original sources

PubMed2006

Fabrication of non-biofouling polyethylene glycol micro- and nanochannels by ultraviolet-assisted irreversible sealing.

We present a simple and widely applicable method to fabricate micro- and nanochannels comprised entirely of crosslinked polyethylene glycol (PEG) by using UV-assisted irreversible sealing to bond partially crosslinked PEG surfaces. The method developed here can be used to form channels as small as approximately 50 nm in diameter without using a sophisticated experimental setup. The manufactured channel is a homogeneous conduit made completely from non-biofouling PEG, exhibits robust sealing with minimal swelling and can be used without additional surface modification chemistries, thus significantly enhancing reliability and durability of microfluidic devices. Furthermore, we demonstrate simple analytical assays using PEG microchannels combined with patterned arrays of supported lipid bilayers (SLBs) to detect ligand (biotin)-receptor (streptavidin) interactions.

Acrylates↗

PubMed2006

Nanoengineered multiscale hierarchical structures with tailored wetting properties.

A simple method for fabricating micro/nanoscale hierarchical structures is presented using a two-step temperature-directed capillary molding technique. This lithographic method involves a sequential application of the molding process in which a uniform polymer-coated surface is molded with a patterned mold by means of capillary force above the glass transition temperature of the polymer. Various microstructures and nanostructures were fabricated with minimum resolution down to approximately 50 nm with good reproducibility. Also contact angle measurements of water indicated that two wetting states coexist on a multiscale hierarchical structure where heterogeneous wetting is dominant for the microstructure and homogeneous wetting for the nanostructure. A simple theoretical model combining these two wetting states was presented, which was in good agreement with the experimental data. Using this approach, multiscale hierarchical structures for biomimetic functional surfaces can be fabricated with precise control over geometrical parameters and the wettability of a solid surface can be tailored in a controllable manner.

Journal Article↗

PubMed2006

Stretched polymer nanohairs by nanodrawing.

A simple, yet innovative, method is presented for fabricating high-aspect-ratio polymer nanohairs (aspect ratio >20) on a solid substrate by sequential application of molding and drawing of a thin polymer film. The polymer film was prepared by spin coating on a rigid or flexible substrate, and the temperature was raised above the polymer's glass transition while in conformal contact with a poly(urethane acrylate) mold having nanocavities. Consequently, capillary forces induced deformation of the polymer melt into the void spaces of the mold and the filled nanostructure was further elongated upon removal of the mold due to tailored adhesive force at the mold/polymer interface. The optimum value of the work of adhesion at the mold/polymer interface ranged from 0.9 to 1.1 times that at the substrate/polymer interface.

Capillary Action↗