Biomedical subjects

Hossein Zia

Publications and source records attributed to Hossein Zia.

5 recordsLinked to original sources

PubMed2007

Improving the dissolution rate of poorly water soluble drug by solid dispersion and solid solution: pros and cons.

The solid dispersions with poloxamer 188 (P188) and solid solutions with polyvinylpyrrolidone K30 (PVPK30) were evaluated and compared in an effort to improve aqueous solubility and bioavailability of a model hydrophobic drug. All preparations were characterized by differential scanning calorimetry, powder X-ray diffraction, intrinsic dissolution rates, and contact angle measurements. Accelerated stability studies also were conducted to determine the effects of aging on the stability of various formulations. The selected solid dispersion and solid solution formulations were further evaluated in beagle dogs for in vivo testing. Solid dispersions were characterized to show that the drug retains its crystallinity and forms a two-phase system. Solid solutions were characterized to be an amorphous monophasic system with transition of crystalline drug to amorphous state. The evaluation of the intrinsic dissolution rates of various preparations indicated that the solid solutions have higher initial dissolution rates compared with solid dispersions. However, after storage at accelerated conditions, the dissolution rates of solid solutions were lower due to partial reversion to crystalline form. The drug in solid dispersion showed better bioavailability in comparison to solid solution. Therefore, considering physical stability and in vivo study results, the solid dispersion was the most suitable choice to improve dissolution rates and hence the bioavailability of the poorly water soluble drug.

Animals↗

PubMed2005

Characterization of physico-mechanical properties of indomethacin and polymers to assess their suitability for hot-melt extrusion processs as a means to manufacture solid dispersion/solution.

The objective of the study was to characterize the physical and viscoelastic properties of binary mixtures of drug and selected polymers to assess their suitability for use in the hot-melt extrusion (HME) process as a means to improve solubility by manufacturing either solid dispersion or solid solution. Indomethacin (INM) was selected as a model drug. Based on comparable solubility parameters, the selected polymers were Eudragit EPO (EPO), polyvinylpyrrolidone/vinyl acetate copolymer (PVP-VA), polyvinylpyrrolidone K30 (PVPK30), and poloxamer 188 (P188). The various drug and polymer systems were characterized for thermal and rheological properties as a function of drug concentration to provide an insight into miscibility and processibility of these systems. From the thermal analysis studies, a single T(g) was observed for the binary mixtures of INM/EPO, INM/PVP-VA, and INM/PVPK30, indicating miscibility of drug and polymer in the given ratios. In the case of mixtures of INM/P188, two melting endotherms were observed with decreasing drug melting point as a function of polymer concentration indicating partial miscibility of drug in polymer. As part of the rheological evaluation, zero rate viscosity (eta(o)) and activation energy (E(a)) was determined for the various systems using torque rheometer at varying shear rates and temperatures. The eta(o) for binary mixtures of drug and EPO, PVP-VA and PVPK30 were found to be significantly lower as compared to pure polymer, indicating disruption of the polymer structure due to miscibility of the drug. On the other hand, INM/P188 mixtures showed a higher eta(o) compared to pure polymer indicating partial miscibility of drug and polymer. With respect to E(a), the mixtures of INM/EPO showed an increase in E(a) with increasing drug concentration, suggesting antiplasticization effect of the drug. These findings corroborate the thermal analysis results showing increase T(g) for the various binary mixtures. The mixtures of INM/PVP-VA showed a decrease in the E(a) with the increasing drug concentration suggesting a plasticization effect of the drug. The understanding of thermal and rheological properties of the various drug/polymer mixtures help established the processing conditions for hotmelt extrusion (such as extrusion temperatures and motor load) as well as provided insight into the properties of the final extrudates. Using the actual hot-melt processing, a model was developed correlating the zero rate viscosity to the motor load determined by rheological evaluation.

Acrylates↗

PubMedDate not supplied

Formulation and optimization of a sustained-release tablet of ketorolac tromethamine.

The objective of our study was to formulate a sustained-release tablet of Ketorolac tromethamine, which is a nonsteroidal anti-inflammatory agent. A 2(3) full factorial design (8 runs) was selected. The variables studied were the amount of drug (30 and 40 mg), ratio of hydroxypropyl methylcellulose (HPMC)/sodium carboxymethylcellulose (NaCMC) (240/40 and 140/140 mg), and amount of ethylcellulose (140 and 180 mg). Swelling-controlled matrix tablets were manufactured by direct compression of formulation ingredients using a Stokes single punch tablet press. Dissolution tests were performed using USP apparatus 3 (Bio-Dis II), at various pHs to mimic the conditions that exist in the gastrointestinal tract. Responses studied included time for 50% of the drug to dissolve (T(50)), diffusional exponent (n) that characterizes the release mechanism, and percent friability of the tablets. Analysis of variance indicated that the release rate (T(50)) was affected by the HPMC/NaCMC ratio, amount of drug, and two-way and three-way interactions; whereas the amount of drug, HPMC/NaCMC ratio, ethylcellulose, and the interaction between drug and HPMC/NaCMC and HPMC/NaCMC and ethylcellulose and also three-way interactions were significantly affecting the diffusional exponent (n). The release mechanism was found to be super-case II transport. The friability of the tablets was significantly affected by all three factors: amount of drug, HPMC/NaCMC ratio, and amount of ethylcellulose. The formulation giving the best release characteristics was identified.

Chemistry, Pharmaceutical↗

PubMedDate not supplied

Transdermal delivery of nicardipine: an approach to in vitro permeation enhancement.

Nicardipine hydrochloride (NC-HCl), a calcium channel blocker for the treatment of chronic stable angina and hypertension, seems to be a potential therapeutic transdermal system candidate, mainly due to its low dose, short half-life, and high first-pass metabolism. The objective of the present study was to evaluate its flux and elucidate mechanistic effects of formulation components on transdermal permeation of the drug through the skin. Solubility of NC-HCl in different solvent systems was determined using a validated HPLC method. The solubility of drug in various solvent systems was found to be in decreasing order as propylene glycol (PG)/oleic acid (OA)/dimethyl isosorbide (DMI) (80:10:10 v/v) > PG > PG/OA (90:10 v/v) > polyethylene glycol 300 > ethanol/PG (70:30 w/w) > transcutol > dimethyl isosorbide (DMI) > ethanol > water and buffer 4.7 > 2-propanol. Propylene glycol was then selected as the main vehicle in the development of a transdermal product. As a preliminary step to develop a transdermal delivery system, vehicle effect on the percutaneous absorption of NC-HCl was determined using the excised skin of a hairless guinea pig. Vehicles investigated included pure solvents alone and their selected blends, chosen based on the solubility results. In vitro permeation data were collected at 37 degrees C, using Franz diffusion cells. The skin permeation was then evaluated by measuring the steady state permeation rate (flux) of NC-HCl, lag time, and the permeability constant. The results showed that no individual solvent was capable of promoting NC-HCl penetration. Permeation profiles of the drug through hairless guinea pig skin using saturated solutions of drug were constructed. Among the systems studied, the ternary mixture of PG/OA/DMI and binary mixture of PG/OA showed excellent flux. The flux value of the ternary system was nearly three times higher than the corresponding values obtained for the binary solvent. A similar trend also was observed for the permeation constant, while the values of lag time were reversed. The ternary mixture was then selected as a potential absorption enhancement vehicle for the transdermal delivery of drug. In general, higher fluxes were observed through hairless guinea pig skin as compared with the human stratum corneum. Based on the results obtained from the release study of NC-HCl from saturated solutions of the drug, a novel lecithin organogel (microemulsion-based gel) composed of soybean lecithin, propylene glycol, oleic acid, dimethyl isosorbide, and isopropyl myristate was developed as a possible matrix for transdermal delivery of NC-HCl. In vitro percutaneous penetration studies from this newly developed gel system through giunea pig skin and human stratum corneum revealed that the organogel system has skin-enhancing potential and could be a promising matrix for the transdermal delivery of nicardipine. Furthermore, higher permeation rates were observed when nicardipine free base was incorporated into the gel matrix instead of hydrochloride salt.

Administration, Cutaneous↗

PubMedDate not supplied

Mechanistic study of solubility enhancement of nifedipine using vitamin E TPGS or solutol HS-15.

The objective of our study was to find mechanisms responsible for solubility enhancement of nifedipine in solid dispersions of vitamin E TPGS and/or solutol HS-15. Solid dispersions of nifedipine with selected polymers such as vitamin E TPGS, solutol HS-15, PEG(1,000), and lipocol C-10 of varying drug/polymer ratios were prepared by a fusion method. The solubility enhancement was found to be in the order of vitamin E TPGS > solutol HS-15 > lipocol C-10 > PEG(1,000). Lipocol C-10, with a similar hydrophilic-lipophilic value as vitamin E TPGS, showed a comparable retained solubility enhancement during saturation solubility studies but had lower dissolution profile. Overall, vitamin E TPGS showed the best solubility and dissolution performance, while solutol HS-15 and lipocol C-10 demonstrated moderate solubility enhancements. Solid dispersions of vitamin E TPGS as prepared by microfluidization technique initially showed slightly higher solubility compared with samples prepared by fusion method, but eventually it became the same as the study progressed. However, solid dispersion of solutol HS-15 as prepared by microfluidization demonstrated a significant, sustained increased in solubility over its sample when prepared by fusion method. Based on these results, we concluded that enhanced solubility using vitamin E TPGS and solutol HS-15 resulted from a partial conversion of crystalline drug to the amorphous form, increase in wettability of the drug by water soluble polymers, better separation of drug particles, micellar solubilization of drug by high concentrations of surfactant polymers, and interaction between polymer and drug at the molecular level.

Calcium Channel Blockers↗