PubMed Health⌕ Search

Biomedical subjects

Hubert Wadepohl

Publications and source records attributed to Hubert Wadepohl.

11 recordsLinked to original sources
PubMed2006

Tuning of inter- versus intrachain magnetic interactions in cyano-bridged Ni(II)/M(III) (M = Cr, Fe, Co) chain complexes.

The reaction of [M(CN)6]3- (M = Cr3+, Fe3+, Co3+) with the nickel(II) complex of 2,4-diamino-1,3,5-triazin-6-yl-{3-(1,3,5,8,12-pentaazacyclotetradecane)} ([NiL]2+) in excess of ANO3 or ACl (A = Li+, Na+, K+, Rb+, Cs+, NH4+) leads to the cyano-bridged dinuclear assemblies A{[NiL][M(CN)6]}.xH2O (x = 2-5). X-ray structures of Li{[NiL][Cr(CN)6]}.5H2O, NH4{[NiL][Cr(CN)6]}.3.5H2O, K{[NiL][Cr(CN)6]}.4H2O, K{[NiL][Fe(CN)6]}.4H2O, Rb{[NiL][Fe(CN)6]}.3.5H2O, and Cs{[NiL][Fe(CN)6]}.3.5H2O, as well as the powder diffractometry of the entire Fe(III) series, are reported. The magnetic properties of the assemblies are dependent on the monocation A and discussed in detail. New efficient pathways for ferromagnetic exchange between Ni(II) and Fe(III) or Cr(III) are demonstrated. Field dependencies of the magnetization for the Fe(III) samples at low temperature and low magnetic field indicate a weak interchain antiferromagnetic coupling, which is switched to ferromagnetic coupling at increasing magnetic field (metamagnetic behavior). The interchain magnetic coupling can be tuned by the size of the A cations.

Journal Article↗
PubMed2006

2-Aminopyrrolines: new chiral amidinate ligands with a rigid well-defined molecular structure and their coordination to Ti(IV).

The use of an amino-oxazolinate (NN(ox) = kappa2-2,6-dimethylphenylamido-4(S)-isopropyloxazoline) as a chiral analogue to amidinate ligands in the chemistry of titanium was found to lead to undesired side reactions. The reaction of 2,6-dimethylphenylamido-4(S)-isopropyloxazoline with [Ti(NMe2)4] afforded the bis(amidinato) complex [Ti(NN(ox))2(NMe2)2] (2) which was thermally converted to the ring-opened decomposition products [Ti(NN(ox)){kappa3-N(2,6-C6H3Me2)C(NMe2)NC(iPr)CH2O}(NMe2)] (3) and [Ti{kappa3-N(2,6-C6H3Me2)C(NMe2)-NC(iPr)CH2O}2] (4). The NMR spectra of 4 recorded at low temperature displayed two sets of resonances corresponding to two symmetric isomers in a 2:5 ratio, the probable geometries of which were established by ONIOM (QM/MM) simulations. To suppress ring opening of the oxazolines, their oxygen atom was formally replaced by a CH2 group in the synthesis of a series of amino-pyrroline protioligands 2-RN(H)(5-C4H5NR') (HN(R)N(R')). Their reaction with [Ti(NMe2)4] gave the thermally stable complexes [Ti(N(R)N(R'))2(NMe2)2], of which three derivatives were characterized by X-ray diffraction. They are stereochemically dynamic and undergo reversible ligand rearrangements in solution, for which the activation parameters were determined by variable-temperature (1)H NMR spectroscopy.

Journal Article↗
PubMed2006

Catecholase activity of dicopper(II)-bispidine complexes: stabilities and structures of intermediates, kinetics and reaction mechanism.

A mechanism for the oxidation of 3,5-di-tert-butylcatechol (dtbc) with dioxygen to the corresponding quinone (dtbq), catalyzed by bispidine-dicopper complexes (bispidines are various mono- and dinucleating derivatives of 3,7-diazabicyclo[3.3.1]nonane with bis-tertiary-amine-bispyridyl or bis-tertiary-amine-trispyridyl donor sets), is proposed on the basis of (1) the stoichiometry of the reaction as well as the stabilities and structures [X-ray, density functional theory (B3LYP, TZV)] of the bispidine-dicopper(II)-3,4,5,6-tetrachlorcatechol intermediates, (2) formation kinetics and structures (molecular mechanics, MOMEC) of the end-on peroxo-dicopper(II) complexes and (3) kinetics of the stoichiometric (anaerobic) and catalytic (aerobic) copper-complex-assisted oxidation of dtbc. This involves (1) the oxidation of the dicopper(I) complexes with dioxygen to the corresponding end-on peroxo-dicopper(II) complexes, (2) coordination of dtbc as a bridging ligand upon liberation of H(2)O(2) and (3) intramolecular electron transfer to produce dtbq, which is liberated, and the dicopper(I) catalyst. Although the bispidine complexes have reactivities comparable to those of recently published catalysts with macrocyclic ligands, which seem to reproduce the enzyme-catalyzed process in various reaction sequences, a strikingly different oxidation mechanism is derived from the bispidine-dicopper-catalyzed reaction.

Bridged Bicyclo Compounds, Heterocyclic↗
PubMed2006

Oxidative N-dealkylation in cobalt-bispidine-H2O2 systems.

The reaction of the Co(II) complex with the rigid bispidine ligand L1 with two tertiary amine and two pyridine donors, [Co(II)(L1)(OH2)2]2+, with H2O2 and O2 produces [Co(II)(L2)(OH2)2]3+, where L2 is demethylated at one of the amine donors, and CH2O.

Bridged Bicyclo Compounds, Heterocyclic↗
PubMed2005

Bisoxazolines with one and two sidearms: stereodirecting ligands for copper-catalysed asymmetric allylic oxidations of alkenes.

A series of sidearm functionalized bisoxazoline ligands has been synthesized by reaction of the monolithiated methyl{bis(oxazolinyl)}methane with the appropriate electrophiles, and tested in the copper catalyzed asymmetric allylic oxidation of cyclohexene ("Kharasch-Sosnovski" reaction). The observed enantioselectivities were higher (up to 85% ee) than for the unfunctionalized bisoxazoline ("BOX") derivatives (ca. 60% ee). Regardless of the functional groups incorporated into the sidearm unit, the ee's obtained for the different derivatives were essentially indistinguishable. This implies that the sidearms do not interfere directly in this reaction and only play an indirect role by virtue of their steric demand. Three of the copper complexes have been characterized by X-ray diffraction, establishing a distorted octahedral coordination geometry around the copper atom in all three cases. In the elongated distorted CuN(2)O(4) octahedra, the two nitrogen atoms of the oxazolines and one oxygen atom of each acetate ligand occupy the 'equatorial' positions whereas the sidearms do not interact with the metal centres.

Journal Article↗
PubMed2005

Catalytic transesterification of dialkyl phosphates by a bioinspired dicopper(II) macrocyclic complex.

For a number of phosphoryltransfer enzymes, including the exonuclease subunit of DNA polymerase I, a mechanism involving two-metal ions and double Lewis-acid activation of the substrate, combined with leaving group stabilization, has been proposed. Inspired by the active site structure of this enzyme, we have designed as a synthetic phosphoryl transfer catalyst the dicopper(II) macrocyclic complex LCu(2). Crystal structures of complexes [(L)Cu(2)(mu-NO(3))(NO(3))](NO(3))(2) (1), [(L)Cu(2)(mu-CO(3))(CH(3)OH)](BF(4))(2) (2), and [(L)Cu(2)(mu-O(2)P(OCH(3))(2))(NO(3))](NO(3))(2) (3) illustrate various possibilities for the interaction of oxoanions with the dicopper(II) site. 1 efficiently promotes the transesterification of dimethyl phosphate (DMP) in CD(3)OD, k(cat) = 2 x 10(-)(4) s(-)(1) at 55 degrees C. 1 is the only available catalyst for the smooth transesterification of highly inert simple dialkyl phosphates. From photometric titrations and the pH dependence of reactivity, we conclude that a complex [(L)Cu(2)(DMP)(OCH(3))](2+) is the reactive species. Steric bulk at the -OR substituents of phosphodiester substrates O(2)P(OR)(2)(-) drastically reduces the reactivity of 1. This is explained with -OR leaving group stabilization by Cu coordination, an interaction which is sensitive to steric crowding at the alpha-C-atom of substituent R. A proposed reaction mechanism related to that of the exonuclease unit of DNA polymerase I is supported by DFT calculations on reaction intermediates. The complex [(L)Cu(3)(mu(3)-OH)(mu-CH(3)O)(2)(CH(3)CN)(2)](ClO(4))(3) (4) incorporates a [Cu(OH)(OCH(3))(2)(CH(3)CN)(2)](-) complex anion, which might be considered as an analogue of the [PO(2)(OCH(3))(2)(OCD(3))](2)(-) transition state (or intermediate) of DMP transesterification catalyzed by LCu(2).

Journal Article↗
PubMed2005

Exploiting C3-symmetry in the dynamic coordination of a chiral trisoxazoline to copper(II): improved enantioselectivity, and catalyst stability in asymmetric lewis acid catalysis.

Chiral C3-symmetric trisoxazolines are highly efficient stereodirecting ligands in enantioselective Cu(II) Lewis acid catalysis which is based on the concept of a stereoelectronic hemilability of the divalent copper; in direct comparison with the analogous bisoxazoline systems they are more efficient in the enantioselective alpha-amination as well as the enantioselective Mannich reaction of prochiral beta-ketoesters.

Journal Article↗
PubMed2005

Designing the "search pathway" in the development of a new class of highly efficient stereoselective hydrosilylation catalysts.

The direct coupling of oxazolines and N-heterocyclic carbenes leads to chelating C,N ancillary ligands for asymmetric catalysis that combine both an "anchor" unit and a stereodirecting element. Reacting various N-substituted imidazoles with 2-bromo-4(S)-tert-butyl- and 2-bromo-4(S)-isopropyloxazoline gave the imidazolium precursors of the stereodirecting ancillary ligands. A library of ten different ligand precursors was obtained by using this simple procedure (65-97 % yield). These protioligands were metalated in a subsequent step by reaction with [{Rh(mu-OtBu)(nbd)}2] (nbd=norbornadiene), generated in situ from KOtBu and [{RhCl(nbd)}2] giving the corresponding N-heterocyclic carbene complexes [RhBr(nbd)(oxazolinyl-carbene)] 4 a-j in good yields. X-ray diffraction studies of two of the rhodium complexes, 4 d and 4 j, established a distorted square-pyramidal coordination geometry with the bromo ligand occupying the apical position. The rhodium-carbene bond length was found to be 2.070(4) A (4 d) and 2.012(3) A (4 j). Complexes 4 a-j were treated with AgBF4 in dichloromethane, giving the active cationic square-planar catalysts for the hydrosilylation of ketones. As a reference reaction for the catalyst optimisation, the hydrosilylation of acetophenone with diphenylsilane was studied and the system optimised with respect to the counterion (BF(4) (-)), solvent (THF) and the silane reducing agent (diphenylsilane). The reaction product (1-phenylethanol) was obtained with the highest enantiomeric excess (ee) by carrying out the reaction at -60 degrees C, whilst the enantioselectivity drops upon going both to lower and higher temperatures. The observation that the temperature dependence of the ee values goes through a maximum indicated a change in the rate-determining step as the temperature is varied. The determination of the initial reaction rate in the hydrosilylation of acetophenone upon varying the catalyst (4 d) and substrate concentrations at -55 degrees C established a rate law for the initial conversion which is first-order in both substrates as well as the catalyst (Vi = k[4][PhCOMe][Ph2SiH2]). The catalytic system derived from complex 4 d was found to afford high yields and good enantioselectivities in the reduction of various aryl alkyl ketones (acetophenone: 92 % isolated yield and 90 % ee, 2-naphtyl methyl ketone: 99 % yield, 91 % ee). The selectivity for the reduction of prochiral dialkyl ketones is comparable or even superior to the best previously reported for prochiral nonaromatic ketones; whereas cyclopropyl methyl ketone is hydrosilylated with an enantioselectivity of 81 % ee, the increase of the steric demand of one of the alkyl groups leads to improved ee's, reaching 95 % ee in the case of tert-butyl methyl ketone. Linear chain n-alkyl methyl ketones, which are particularly challenging substrates, are reduced in good asymmetric induction, such as 2-octanone (79 % ee) and even 2-butanone (65 % ee).

Journal Article↗
PubMed2003

Aromaticity of benzene in the facial coordination mode: a structural and theoretical study.

The effects of facial coordination of benzene to a trinuclear transition-metal cluster have been studied by structure correlation and DFT calculational methods. Data taken from the X-ray crystal structures of twelve complexes [(eta-C(5)H(4)R")Co(3)(micro(3)-eta(2):eta(2):eta(2)-C(6)H(4)RR')] 1 b-1 m were analyzed by using standard statistical methods. The prototypal facial arene ligand is considerably expanded with respect to free benzene and shows a small but highly significant Kekulè distortion (d(CC)=1.42, 1.45 A). DFT MO calculations were carried out on the model complexes [(eta-C(5)H(5))M(3)(micro-eta(2):eta(2):eta(2)-C(6)H(6))] 1 a (M=Co), 2 (M=Rh), and 3 (M=Ir). Ring currents in the facial benzene and apical cyclopentadienyl ligands have been assessed by nucleus independent chemical shift (NICS) calculations. Compared to the free ligand (with the optimized D(6h) structure as well as with D(3h) and a C(3v) geometries similar to that in the prototypal facial arene), facial benzene exhibits somewhat reduced but still substantial cyclic electron delocalization (CED). The calculated order of CED is benzene approximately [(CO)(3)Cr(eta-C(6)H(6))] 4 > 1 > 2 > 3.

Journal Article↗
PubMed2002

Cyclopentadienylrhodium coordination to alkenylarenes.

Photochemical reaction of [Rh(eta-C(5)H(5))(C(2)H(4))(2)] (5) with alkenyl benzene derivatives PhC(R(1))=CHR(2) results in the formation of four types of cyclopentadienylrhodium complexes: the mononuclear ethylene eta(2)-alkenylbenzene complexes [Rh(eta-C(5)H(5))(eta-C(2)H(4))(eta(2)-PhC(R(1))=CHR(2))] 9 a (R(1)=H, R(2)=Ph), 9 b (R(1)=Ph, R(2)=H), 9 c (R(1)=CH(3), R(2)=H), the mononuclear eta(4)-alkenylbenzene complex [Rh(eta-C(5)H(5))[beta,alpha,1,2-eta-C(6)H(5)C(Ph)=CH(2)]] (10), the dinuclear mu-eta(4):eta(4)-alkenylbenzene complex [anti-[Rh(eta-C(5)H(5))](2)[mu-beta,alpha,1,2-eta:3,4,5,6-eta-C(6)H(5)C(Ph)C=CH(2)]] (11), and the dinuclear rhodaindenyl complexes [Rh(eta-C(5)H(5))[1-3,8,9-eta-[1-(eta-C(5)H(5))]-3-R(1)-1-rhodaindenyl]] 12 a (R(1)=Ph), 12 b (R(1)=CH(3)). Reaction of 5 with triisopropenylbenzene gives the dinuclear complex [[Rh(eta-C(5)H(5))](2)(mu-beta,alpha,1,2-eta:beta',alpha',4,3-eta-C(6)H(3)[C(CH(3))=CH(2)](3))] (13). In the complexes 9, only the olefinic side chain of the alkenylbenzene binds to the metal. In the complexes 10, 11, 12, and 13, an arene nucleus coordinates to rhodium as a 1,3-diene moiety (or part thereof). The rhodaindenyl complexes 12 result from C-H activation of the alkenylbenzene at the beta and ortho positions. The crystal and molecular structures of 9 a, 9 b, 10, 11, and 12 a, b were determined. The role of 9-11 and 13 as models for intermediates during alkenylbenzene-assisted self-assembly of tricobalt clusters is discussed.

Journal Article↗