PubMed Health⌕ Search

Biomedical subjects

Huiqi Xie

Publications and source records attributed to Huiqi Xie.

At least 19 recordsLinked to original sources

Neurovascular coupling in the basolateral amygdala modulates negative emotions.

Emotion induces changes in regional cerebral blood flow, a manifestation of neurovascular coupling (NVC). However, whether NVC provides feedback to actively modulate emotion remains unexplored. Here, we demonstrate that NVC actively and bidirectionally modulates stress-induced negative emotions. We established bidirectional manipulations of NVC in freely moving mice by employing integrated pharmacological, genetic, and arteriolar optogenetic approaches. Our results showed that both systemic and region-specific NVC deficiencies in the basolateral amygdala (BLA) heightened emotional responses when mice transitioned from a safe, familiar environment to anxiogenic environments and that local restoration of NVC in the BLA normalized these responses. Mechanistically, NVC dysfunction impaired the capacity of BLA neuronal scaling during state transitions, manifesting as a characteristic biphasic pattern of c-Fos topology. NVC-deficient animals aberrantly adopted high-stress configurations under mild stress but regressed to low-stress templates during high-demand survival threats, thereby compromising defensive sustainability. Notably, the genetic NVC-enhancement model counteracted NVC impairments caused by chronic stress, thereby alleviating stress-driven emotional distress. These findings establish NVC in the BLA as an allostatic program that fine-tunes neural circuit activity during emotional responses, with implications for understanding and treating emotional disorders.

Animals↗

[Experimental study on cryopreservation of seeding cells of tissue engineered tendons].

This study sought to find out a good way for the cryopreservation of tendon seeding cells so as to facilitate the preparation of tissue engineering tendons as products. The related questions are how different factors affect cell survival rate at the procedure of preservation and whether cryopreservation affects seeding cells' biological characters as well as collagen secretive function. The results of experiment indicate that DMSO is a more effective cryoprotectant in cryopreservation of tissue engineered tendon seeding cells. Blood serum nourishment is very important in cell culture, preservation and treatment. The same sustenance after cryopreservation increases cell survival rate. In the process of cryopreservation, the concentration of cells is important to cell survival rate; cell survival rate will decrease when it is less than 1.0 x 10(6)/ml. In the process of cryopreservation, the cooling speed is also important to cell survival rate, slow cooling method achieves higher cell survival rate than does the rapid cooling method. Cryopreservation by use of 10%DMSO+15%FCS+75%DMEM does not affect seeding cells' collagen secretive function greatly and does not affect seeding cells' growth curve, cell cycle and chromosome mode obviously. The prescription of 10%DMSO +15%FCS+75%DMEM is suited for the cryopreservation of tendon seeding cells.

Cell Count↗

[Effect of sodium hyaluronate on proliferation and differentiation of myoblast in vitro].

OBJECTIVE: To investigate the effects of sodium hyaluronate solution on the proliferation and differentiation of myoblasts. METHODS: The 3rd subculture myoblasts from muscle of infant SD rat were cultured in four growth media, in which the concentrations of sodium hyaluronate were 0.05% (group A), 0.1% ( group B), 0.2% (group C)and 0 (group D, control group), respectively. The proliferation rate of myoblasts in each medium was observed through growth curves by means of count and MTT. At the same time, the subculture myoblasts were cultured in differentiated media in which the concentrations of sodium hyaluronate were 0 and 0.1%. The capacity of fusion of myoblasts was compared between two kinds of differentiated media. RESULTS: There were the nearly same proliferation curse in Groups A, B and C: increasing by logarithm at 2 days and reaching peak value at 4 days. The myoblasts in Group D increased slowly: increasing by logarithm at 3 days, doubling at 5 days and reaching peak value at 6 days. MTT has the similar curse to counting. The myoblast proliferation of Group B was more than that of the other groups. The peak value of myoblast fusion was 35% at 6 days in common differentiated media; slowly reached 11.7% at 7 days in the differentiated media in which the concentrations of sodium hyaluronate was 0.1%. CONCLUSION: Sodium hyaluronate at certain concentration can be a decent media for myoblasts, it can accelerate proliferation and differentiation of myoblasts.

Animals↗

[Studies of preparation, morphology and in vitro release on bio-derived material-WO-1 delivery system].

OBJECTIVE: To study the potential of a bio-derived material combined with Pluronic F-127 in vitro as a delivery vehicle for WO-1 in the bone repair therapy. METHODS: Bio-derived materials were fabricated and loaded with WO-1 by Pluronic F-127. Micromorphology and porosity were detected by the scanning electron microscope and the digital image analysis system respectively. The WO-1 release from the system in vitro was studied by the high performance liquid chromatography. RESULTS: Bio-derived material-WO-1 drug delivery systems were created with the interconnected pore network. The porosity and pore size of the system were 55% and 522.43 +/- 16.75 microm respectively, compared with those of bio-derived materials, which were 75% and 623. 67 +/- 12.31 microm respectively. And the main composition of the system was HA. The in vitro release kinetics of WO-1 revealed that an effective therapeutic concentration (0.2-0.8 microg/ml) of WO-1 was maintained for 6 days after a high initial burst release. Conclusion The bio-derived material-WO-1 drug delivery system can be used in the bone repair therapy. However, the in vivo study on it is still needed.

Animals↗

[Effects of WO-1 on repair of bone defects in rabbits].

OBJECTIVE: To evaluate the effect of WO-1 on repair of the bone defect in the New Zealand rabbit radius by an oral or local administration. METHODS: Bone defects were surgically created in the bilateral radii of 36 Zealand rabbits (1.6-2.0 kg), which were randomly divided into 3 groups. In Group A, the defective areas were given WO-1 0.1 ml (50 mg/ml) by the local injections; in Group B, the rabbits were given WO-1 5 mg each day by the oral administration. Group C was used as a control group. Among each of the 3 groups, 4 rabbits were randomly selected and were sacrificed at 20, 30 and 60 days after operation, respectively. Then, the serological, X-ray and histological examinations were performed. RESULTS: The serum alkaline phosphatase and bone gla-protein levels were significantly higher at 20 and 30 days after operation in Groups A and B than in Group C, but significantly lower at 60 days after operation in Groups A and B than in Group C(P<0. 01). The X-ray and histological examinations at 20, 30 and 60 days after operation revealed that the callus formation and remodeling were earlier in Groups A and B than in Group C, and the remodeling was earlier and better in Group A than in Group B. CONCLUSION: WO-1 can promote the repair of the radial defect in a rabbit; however, further studies on the dose-effect relationship, administration time, and administration route are still needed.

Animals↗

[Expression of interleukin 2 and IL-2 receptor after implanted tissue engineered bones constructed with allogeneic marrow stromal stem cells and bio-derived materials in rhesus monkeys].

OBJECTIVE: To explore the feasibility of allogeneic marrow stromal stem cells (MSCs) as seed cells to construct tissue engineered bone by detecting the expressions of interleukin 2 (IL-2) and IL-2 receptor in rhesus monkeys after implanting these tissue engineered bones. METHODS: Engineered bones were constructed with osteoblasts which derived from allogeneic MSCs and bio-derived materials in vitro, and then were implanted to bridge 2.5 cm segmental bone defects of left radius in 15 rhesus monkeys as experimental group, bio-derived materials only were implanted to bridge same size defects of right radius as control group. Every 3 monkeys were sacrificed in the 1st, the 2nd, the 3rd, the 6th and the 12th weeks postoperatively and the expressions of IL-2 and IL-2 receptor in blood and graft samples were detected quantitatively by enzyme-linked immunosorbent assay (ELISA). RESULTS: There was no significant difference in the contents of IL-2 and its receptor between 2 groups (P>0.05). The contents of IL-2 and its receptor increased from the 2nd week and maintained high level from the 2nd to the 6th week, but decreased after 6 weeks. CONCLUSION: Tissue engineered bones constructed with allogeneic MSCs and bio-derived materials show low immunogenicity. Allogeneic MSCs may be used as seed cells to construct tissue engineered bone.

Animals↗

[Experimental study on constructing muscle tissue in rabbits with tissue engineering methods].

OBJECTIVE: To explore the possibility of constructing tissue engineering muscles by combining allogeneic myoblasts with small intestinal submucosa (SIS) in rabbits. METHODS: A large number of purified myoblasts were obtained with multi-procedure digestion and repeated attachment method from skeletal muscles taken from extremities of immature rabbits which were born 7 days ago. The myoblasts were labeled with BrdU, and then combined with SIS to construct tissue engineering muscles. This kind of tissue engineering muscles were grafted into the gastrocnemius muscle defect (1.5 cm in length, 1.0 cm in width) of fifteen rabbits as the experimental group. The SIS was grafted into the same position in the control group. The rabbits were sacrificed 4, 6, 8 weeks after operation. The tissue engineering muscles were evaluated by macroscopic, histological and immunohistochemical observations, and by quantitative analysis of local immunocyte in the grafting site. RESULTS: Allogeneic myoblasts with SIS were combined perfectly in vitro. The SIS was connected tightly to surrounding skeletal muscles and inflammation response was obvious 4 weeks after grafting. The SIS began to break down and inflammation response became slight 6 and 8 weeks after operation. Compared with that of 8th week, the quantitative analysis of local immunocyte in 4th and 6th week in both experimental and control group has significance (P<0.05). Newly formed muscle tissues were found around SIS in the experimental group in 4th, 6th, and 8th week. Expression of BrdU and myosin immunohistochemical staining were positive in the experimental group and negative in the control group. CONCLUSION: Tissue engineering muscles of rabbits which are constructed by combining allogeneic myoblasts with SIS can survive and proliferate.

Animals↗

[Morphological and biomechanical study on in vivo osteogenesis after repair of cranial defects with plastic engineered bone in rabbits].

OBJECTIVE: To investigate the morphology and biomechanics of in vivo osteogenesis after repairing rabbit skull defects with plastic engineered bone which was prefabricated with alginate gel, osteoblasts and bone granules. METHODS: Twenty-eight rabbits were divided into group A (n=16), group B (n=8) and group C (n=4). The bilateral skull defects of 1 cm in diameter were made. Left skull defects filled with alginate gel-osteoblasts-bone granules (group A1) and right skull defects filled with alginate gel-bone granules (group A2). The defects of group B was left, as blank control and group C had no defect as normal control. The morphological change and bone formation were observed by methods of gross, histology and biomechanics. RESULTS: In group A1, the skull defects were almost entirely repaired by hard tissue 12 weeks after operation. The alginate gel-osteoblasts-bone granule material had changed into bone tissue with few bone granules and some residuary alginate gel. The percentage of bone formation area was 40.92% +/- 19.36%. The maximum compression loading on repairing tissue of defects was 37.33 +/- 2.95 N/mm; the maximum strain was 1.05 +/- 0.20 mm; and loading/strain ratio was 35.82 +/- 6.48 N/mm. In group A2, the alginate and bone granules material partially changed into bone tissue 12 weeks after operation. The percentage of bone formation area was 18.51% +/- 6.01%. The maximum compression loading was 30.59 +/- 4.65 N; the maximum strain was 1.35 +/- 0.44 mm; and the loading/strain ratio was 24.95 +/- 12.40 N/mm. In group B, the skull defects were mainly repaired by membrane-like soft tissue with only few bone in marginal area; the percentage of bone formation area was 12.72% +/- 9.46%. The maximum compression loading was 29.5 +/- 2.05 N; the maximum strain was 1.57 +/- 0.31 mm; and the loading/strain ratio was 19.90 +/- 5.47 N/mm. In group C, the maximum compression loading was 41.55 +/- 2.52 N; the maximum strain was 0.95 +/- 0.17 mm; and the loading/strain ratio was 47.57 +/- 11.22 N/mm. CONCLUSION: The plastic engineered bone prefabricated with alginate gel-osteoblasts-bone granule may shape according to the bone defects and has good ability to form bone tissue, whose maximum compression loading can reach 89% of normal skull and the hardness at 12 weeks after operation is similar to that of normal skull.

Alginates↗

[The study of interaction between the osteoblast and bio-derived material by detecting the gene expression].

OBJECTIVE: To study the gene expressions of human osteoblasts during the construction of tissue engineered bone with the bio-derived material. METHODS: The fetal osteoblasts were used to construct tissue engineered bone with the bio-derived material and then were cultured 2, 4, 6, 8 and 10 days in vitro. Real-time PCR analysis indicated that Cbfa 1, Osterix, Collagen type I, osteocalcin (OC) and Integrin alpha5 and beta1 were present in osteoblasts with bio-derived materials. Results The change of Cbfa1 was consistent with the change of Osterix. On 2nd day and 8th day, the expression of Osterix in experimental group was higher than that in control group, P<0.05. Collagen type I's change was consistent with change of OC expression, and its expression was higher in experimental group than that in control group on 2nd, 4th, 6th and 8th day. The Integrin expression was high all along. Conclusion The important genes can be expressed normally by integrating osteoblasts with bio-derived scaffolds. As skeleton tissue engineering scaffold, the bio-derived bone is conducive to keep the osteoblast's phenotype and differentiation with osteo-conductive ability. The osteoblast can enter proliferation stage favorably and the scaffold materials exert no effects on it. Bio-derived bone can also supply more space for cells to proliferate. The bio-derived materials promote osteoblasts adhesion.

Adult↗

[Therapeutic effect of tissue engineered tendon in repairing old calcaneal tendon rupture and defects].

OBJECTIVE: To probe into the surgical methods and therapeutic effect of repairing old calcaneal tendon rupture and defects with tissue engineered tendons. METHODS: The tissue engineered tendons were prefabricated by co-cultivating allogeneic tendon cells with composite of carbon fiber and polyglycolic acid for 5 days. From August 1999 to June 2002, 7 patients with calcaneal tendon rupture and defects (5-7 cm in length) were treated with tissue engineered tendons. The defects were repaired by suturing repeatedly with tissue engineered tendons. Meanwhile, the defects were covered by gastrocnemius fascial flap for protection and strengthening. After surgery, the ankle joints were fixed with plaster 4 to 6 weeks, and then the functional exercise was done. RESULTS: All the patients were followed up 22 to 56 months (46.9 months on average). Six patients achieved healing by the first intention, only one patient had delayed union. No local or systemic complication occurred in all the cases. No patients were given the second operation for adhesion. In accordance with YIN Qingshui's criterion for therapeutic effect, the results were excellent in 5 cases, good in 1 case and moderate in 1 case. CONCLUSION: Repairing old rupture and defects of calcaneal tendon with tissue engineered tendons can achieve good clinical outcome, it is an optional therapy.

Achilles Tendon↗

[Biological effect of WO-1 on human embryonic osteoblasts].

OBJECTIVE: To investigate the effect of WO-1 on the proliferation and differentiation of human embryonic osteoblasts (HEO) and to provide research methods of bone tissue engineering. Methods HEO were isolated from periosteum and calvaria and then cultured in vitro. The dose-effect relationship between WO-1 concentration and biological effect of HEO was evaluated by growth curve and 3H-TdR count. The effect of WO-1 on cell activity and proliferation was investigated by cloning efficiency, cell cycle analysis was determined by flow cytometer and morphological was examined through transmission electron microscope. Moreover, the effect of WO-1 on osteoblastic function was evaluated at protein and mRNA levels by ALP activity, 3H-proline incorporation, osteocalcin secretion (RIA) and mRNA expression of type I collagen and osteocalcin (RT-PCR). Results The proliferation of HEO was inhibited in high concentration of WO-1, while it was promoted in low concentration of WO-1. The optimal dose was 8 microg/ml, and there was dose-effect relationship in the certain range of WO-1 concentration (0.25 microg/ml to 8 microg/ml). In 8 microg/ml of WO-1, the cloning efficiency and cloning volume of HEO were increased, population doubling time was decreased. All indexes of osteoblastic function including ALP activity, type I collagen synthesis and osteocalcin secretion were increased, the more sufficed cell organs were observed under transmission electron microscope than control group (P < 0.05). CONCLUSION: WO-1 can promote the cell activity and proliferation of HEO cultured in vitro in low concentration, enhance the synthesis of extracellular matrix, such as type I collagen and osteocalcin, and accelerate the mineralization of osteoid. WO-1 can be used as a stimulant of proliferation and differentiation of HEO in the research of bone tissue engineering, which provide the theoretical basis in clinical application.

Bone Substitutes↗

[Effect of different allogenic cells injected into denervated muscles on nerve regeneration in rats].

OBJECTIVE: To study the effect of allogenic different cells injected into denervated muscles on nerve regeneration. METHODS: Thirty-six adult female SD rats, weighted 120-150 g, were divided into four groups randomly (n = 9, each group). Left sciatic nerves were cut down on germfree conditions and given primary suture of epineurium. Different cells were injected into the muscles of calf at once after operation every seven days and in all four times (group A: 1 ml Schwann cells at concentration of 1 x 10(6)/ml; group B: 1 ml mixed cells of Schwann cells and myoblast cells at concentration of 1 x 10(6)/ml; group C: 1 ml extract from the culture medium of kidney endothelial cells; and group D: 1 ml culture medium without FCS as control). After 3 months, the specimen was observed on macrobody and histology, and the densities of neurilemma cell and myoceptor were counted. RESULTS: The means of proximate neurilemma cells were 0.1877 +/- 0.0542 in group A, 0.1551 +/- 0.0321 in group B, 0.0724 +/- 0.0237 in group C, and 0.1877 +/- 0.0542 in group D. The densities of myoceptor were 6.000 +/- 0.866 in group A, 9.000 +/- 2.291 in group B, 12.780 +/- 1.394 in group C, 3.110 +/- 0.782 in group D. CONCLUSION: Schwann cells, mixed cells of Schwann cells with myoblast cells, and the extract from kidney endothelial cells can all accelerate the nerve regeneration. And the effect of extract from the kidney endothelial cell is superior to that of Schwann cell and mixed cell.

Animals↗

[Possibility of using cartilage cultured in centrifuge tube as a substitute for meniscus].

OBJECTIVE: To compare biological characteristics between articular chondrocyte and meniscal fibrochondrocyte cultured in vitro and to investigate the possibility of using cultured cartilage as a substitute for meniscus. METHODS: Chondrocytes isolated from articular cartilage and meniscus of rabbits aged 3 weeks were respectively passaged in monolayer and cultured in centrifuge tube. Cartilages cultured in centrifuge tube and meniscus of rabbit aged 6 weeks were detected by histological examination and transmission electron microscopy. Growth curves of articular chondrocytes and meniscal fibrochondrocytes were compared; meanwhile, cell cycles of articular chondrocytes and meniscal fibrochondrocytes in passage 2 and 4 were separately measured by flow cytometry. RESULTS: Articular chondrocytes in passage 4 were dedifferentiated. Articular chondrocytes formed cartilage 2 weeks after cultivation in centrifuge tube, but meniscal fibrochondrocytes could not generate cartilage. The differences in ultrastructure and histology obviously existed between cultured cartilage and meniscus; moreover, apoptosis of chondrocytes appeared in cultured cartilage. Proportion of subdiploid cells in articular chondrocytes passage 2 and 4 was markedly higher than that in passage 2 and 4 fibrochondrocytes (P < 0.05). CONCLUSION: Meniscal fibrochondrocytes can not form cartilage after cultivation in centrifuge tube, while cartilage cultured in centrifuge tube from articular chondrocytes can not be used as graft material for meniscus. Articular cartilage is markedly different from meniscus.

Animals↗

Surface modification of poly (D,L-lactic acid) with chitosan and its effects on the culture of osteoblasts in vitro.

Chitosan is a good biodegradable natural polymer, widely used in biomedical fields. In this study, chitosan was used to modify the surface of poly (D,L-lactic acid) (PDLLA) in order to enhance its cell affinity. The properties of a modified PDLLA surface and control were investigated by contact angle and electron spectroscopy for chemical analysis (ESCA), which indicated the changes in surface energy and chemical structure. Scanning electron microscopy (SEM) observation displayed differences in surface morphology between the chitosan-modified film and the control. These data reflected that PDLLA films could be modified with chitosan and in turn may affect the biocompatibility of the modified films. Therefore, adhesion and growth of osteoblasts on modified PDLLA films as well as control were studied. Cell morphologies on the films were examined by SEM and cell viability was evaluated using an MTT assay; the differentiated cell function was assessed by measuring alkaline phosphatase (ALP) activity. The ALP activity of modified PDLLA films was significantly higher than that found on the control (p < 0.01). The proliferation of osteoblasts on modified films was also found to be higher than that on the control (p < 0.05), suggesting that chitosan could be used to modify PDLLA and then enhance its cell biocompatibility.

Alkaline Phosphatase↗

Improvement of the functions of osteoblasts seeded on modified poly(D,L-lactic acid) with poly(aspartic acid).

One of the challenges in the field of tissue engineering is the development of biomaterial/cell interactions. For the purposes of the present study, two molecular weights of poly(aspartic acid) (PASP) were used to modify poly(D,L-lactic acid) (PDLLA) films in order to enhance their cell affinity. The properties of the PDLLA-modified surfaces and the controls were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). These data reflect the change in the biocompatibility of modified PDLLA surfaces. Then rat osteoblasts were seeded onto these modified surfaces and on controls to examine their effects on cell adhesion and proliferation. Cell morphologies on these surfaces were studied by scanning electron microscopy (SEM), and cell viability was evaluated with a MTT assay. In addition, differentiated cell function was assessed by measuring alkaline phosphatase (ALP) activity. The results suggest that PASP-modified surfaces may enhance the interactions between osteoblasts and PDLLA films.

Alkaline Phosphatase↗

Poly(D,L-lactic acid) surfaces modified by silk fibroin: effects on the culture of osteoblast in vitro.

The objective of this study was to modify the surface of poly(D,L-lactic acid) (PDLLA) with different molecular weight of silk fibroins, and assess the effects of the modified surfaces on the functions of rat osteoblasts cultured in vitro. The properties of the modified PDLLA surface and the control one were investigated by contact angle and electron spectroscopy for chemical analysis (ESCA). The former indicated the variation of hydrophilicity and the latter suggested that the modified PDLLA film using silk fibroin is enriched with nitrogen atoms. The biocompatibility of the PDLLA film may be altered and in turn affects the seeded cell functions. Therefore, attachment and proliferation of osteoblasts seeded on the modified PDLLA films and the control one were examined. Cell morphologies on these films were studied by scanning electron microscopy (SEM) and cell viability was evaluated by MTT assay. In addition, differentiated cell function was assessed by measuring the alkaline phosphatase (ALP) activity. These results suggest that the silk fibroin-modified PDLLA surface can improve the interaction between osteoblasts and the PDLLA films.

Alkaline Phosphatase↗

Influence of different surface modification treatments on poly(D,L-lactic acid) with silk fibroin and their effects on the culture of osteoblast in vitro.

The objective of this study was to investigate the efficiency of two treatments for poly(D,L-lactic acid) (PDLLA) surface modification using silk fibroin. one chemical treatment and one physical treatment: 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide (WSC) and entrapment. The properties of control films, WSC-modified and entrapment-treated PDLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water-contact angle measurement indicated the change of hydrophilicity and the ESCA analysis suggested that the modified PDLLA film using silk fibroin became enriched with nitrogen atoms. The biocompatibility of PDLLA film might be altered, which in turn would affect the functions of cells that were seeded on it. Therefore, attachment and proliferation of osteoblasts that were seeded on modified PDLLA films and control films were examined. Cell viability was evaluated by the MTT assay and differentiated cell function was assessed by measuring alkaline phosphatase activity. These results suggested that silk fibroin was used to modify PDLLA surface via WSC and that entrapment could improve the interactions between osteoblasts and PDLLA films. The entrapment treatment was more effective thin WSC treatment to accomplish the goal of surface modification.

Alkaline Phosphatase↗

Modulation of osteoblast function using poly(D,L-lactic acid) surfaces modified with alkylation derivative of chitosan.

Poly(D,L-lactic acid) (PDLLA) was modified with alkylated chitosan (N-butyl chitosan and N-cetyl chitosan), and the effects of modified films on the functions of rat osteoblasts were investigated. The characteristics of surfaces (both modified and control) were examined by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). Cell morphologies on these surfaces were taken using scanning electron microscopy (SEM). Cell attachment and proliferation were used to assess cell behavior on modified surface and control. MTT assay was used to determined cell viability, and alkaline phosphatase (ALP) activity was taken to evaluate differentiated cell function. Compared with the untreated films, no significant difference in cell attachment of osteoblasts was found on the modified films at a period of 8 h (p > 0.05). However, cell proliferation of N-butyl chitosan rather than N-cetyl chitosan modified PDLLA films was significantly higher than that found on control one (p < 0.05) at the end of the 4th and 7th days. The cell viability of osteoblasts on N-butyl chitosan modified PDLLA films were found higher than that on control (p < 0.05). These results suggested that N-butyl chitosan contributed greater than N-cetyl chitosan when used to modify PDLLA films for improving its biocompatibility.

Alkaline Phosphatase↗